ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 118 deletions

diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
deleted file mode 100644
index b35b9b7a7ccc..000000000000
--- a/arch/arm/boot/dts/stih418.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- * Author: Peter Griffin <peter.griffin@linaro.org>
- */
-#include "stih418-clock.dtsi"
-#include "stih407-family.dtsi"
-#include "stih410-pinctrl.dtsi"
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
-			cpu-release-addr = <0x94100A4>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
-			cpu-release-addr = <0x94100A4>;
-		};
-	};
-
-	usb2_picophy1: phy2 {
-		compatible = "st,stih407-usb2-phy";
-		#phy-cells = <0>;
-		st,syscfg = <&syscfg_core 0xf8 0xf4>;
-		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-			 <&picophyreset STIH407_PICOPHY0_RESET>;
-		reset-names = "global", "port";
-	};
-
-	usb2_picophy2: phy3 {
-		compatible = "st,stih407-usb2-phy";
-		#phy-cells = <0>;
-		st,syscfg = <&syscfg_core 0xfc 0xf4>;
-		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-			 <&picophyreset STIH407_PICOPHY1_RESET>;
-		reset-names = "global", "port";
-	};
-
-	soc {
-		rng11: rng@8a8a000 {
-			status = "disabled";
-		};
-
-		ohci0: usb@9a03c00 {
-			compatible = "st,st-ohci-300x";
-			reg = <0x9a03c00 0x100>;
-			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
-			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
-				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
-			reset-names = "power", "softreset";
-			phys = <&usb2_picophy1>;
-			phy-names = "usb";
-		};
-
-		ehci0: usb@9a03e00 {
-			compatible = "st,st-ehci-300x";
-			reg = <0x9a03e00 0x100>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
-			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
-				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
-			reset-names = "power", "softreset";
-			phys = <&usb2_picophy1>;
-			phy-names = "usb";
-		};
-
-		ohci1: usb@9a83c00 {
-			compatible = "st,st-ohci-300x";
-			reg = <0x9a83c00 0x100>;
-			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
-			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
-				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
-			reset-names = "power", "softreset";
-			phys = <&usb2_picophy2>;
-			phy-names = "usb";
-		};
-
-		ehci1: usb@9a83e00 {
-			compatible = "st,st-ehci-300x";
-			reg = <0x9a83e00 0x100>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
-			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
-				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
-			reset-names = "power", "softreset";
-			phys = <&usb2_picophy2>;
-			phy-names = "usb";
-		};
-
-		mmc0: sdhci@9060000 {
-			assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
-			assigned-clock-parents = <&clk_s_c0_pll1 0>;
-			assigned-clock-rates = <200000000>;
-		};
-
-		thermal@91a0000 {
-			compatible = "st,stih407-thermal";
-			reg = <0x91a0000 0x28>;
-			clock-names = "thermal";
-			clocks = <&clk_sysin>;
-			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-};