diff options
| author | Jorik Jonker <jorik@kippendief.biz> | 2016-09-12 20:12:44 +0200 |
|---|---|---|
| committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2016-09-21 11:48:08 +0300 |
| commit | ae0fc941527cc74e7aeef700e5dbe07848a00bfb (patch) | |
| tree | 548eaf702dd9abadb7c351cef0157cfc3c4c3831 /arch/arm/boot/dts/sun8i-h3.dtsi | |
| parent | e3d11d3c45c5ef6dac68b49f68ce2bc6d6ddefce (diff) | |
dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
This was done to make UART1-3 on H3 consistent, and less complicated to
enable UART1-3 on the breakout header on the several H3 board (notably
Orange Pi's). This patch adds a bit of complexity for the existing Banana
Pi, which already had the RTS/CTS associated on UART1.
The RTS/CTS for UART2-3 could be defined in the same way, but since
there is no actual use case for them at the moment, they are left out.
Signed-off-by: Jorik Jonker <jorik@kippendief.biz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun8i-h3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sun8i-h3.dtsi | 11 |
1 files changed, 9 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 9571512fdd77..83fcb6a2e618 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -367,8 +367,15 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart1_pins_a: uart1@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + uart1_pins: uart1 { + allwinner,pins = "PG6", "PG7"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart1_rts_cts_pins: uart1_rts_cts { + allwinner,pins = "PG8", "PG9"; allwinner,function = "uart1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |