Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...

1 files changed, 71 insertions, 46 deletions

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index d2d05f1da274..aeae8c092d41 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -20,12 +20,12 @@
 	pcie@3000 {
 		compatible = "nvidia,tegra30-pcie";
 		device_type = "pci";
-		reg = <0x00003000 0x00000800   /* PADS registers */
-		       0x00003800 0x00000200   /* AFI registers */
-		       0x10000000 0x10000000>; /* configuration space */
+		reg = <0x00003000 0x00000800>, /* PADS registers */
+		      <0x00003800 0x00000200>, /* AFI registers */
+		      <0x10000000 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
-			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -36,12 +36,12 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
-			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
-			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+		ranges = <0x02000000 0 0x00000000 0x00000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x00001000 0x00001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x02000000 0 0x00004000 0x00004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0          0x02000000 0 0x00010000>, /* downstream I/O */
+			 <0x02000000 0 0x20000000 0x20000000 0 0x08000000>, /* non-prefetchable memory */
+			 <0x42000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
 
 		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
 			 <&tegra_car TEGRA30_CLK_AFI>,
@@ -97,25 +97,27 @@
 		};
 	};
 
-	iram@40000000 {
+	sram@40000000 {
 		compatible = "mmio-sram";
 		reg = <0x40000000 0x40000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x40000000 0x40000>;
 
-		vde_pool: vde@400 {
+		vde_pool: sram@400 {
 			reg = <0x400 0x3fc00>;
 			pool;
 		};
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra30-host1x", "simple-bus";
+		compatible = "nvidia,tegra30-host1x";
 		reg = <0x50000000 0x00024000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
+		clock-names = "host1x";
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
@@ -183,8 +185,8 @@
 		gr3d@54180000 {
 			compatible = "nvidia,tegra30-gr3d";
 			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_GR3D
-				  &tegra_car TEGRA30_CLK_GR3D2>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D>,
+				 <&tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
 				 <&tegra_car 98>;
@@ -195,7 +197,7 @@
 		};
 
 		dc@54200000 {
-			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
+			compatible = "nvidia,tegra30-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
@@ -255,11 +257,24 @@
 		dsi@54300000 {
 			compatible = "nvidia,tegra30-dsi";
 			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_DSIA>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIA>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
 			status = "disabled";
 		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIB>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 84>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
 	};
 
 	timer@50040600 {
@@ -273,8 +288,8 @@
 
 	intc: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a9-gic";
-		reg = <0x50041000 0x1000
-		       0x50040100 0x0100>;
+		reg = <0x50041000 0x1000>,
+		      <0x50040100 0x0100>;
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		interrupt-parent = <&intc>;
@@ -404,15 +419,15 @@
 
 	vde@6001a000 {
 		compatible = "nvidia,tegra30-vde", "nvidia,tegra20-vde";
-		reg = <0x6001a000 0x1000   /* Syntax Engine */
-		       0x6001b000 0x1000   /* Video Bitstream Engine */
-		       0x6001c000  0x100   /* Macroblock Engine */
-		       0x6001c200  0x100   /* Post-processing Engine */
-		       0x6001c400  0x100   /* Motion Compensation Engine */
-		       0x6001c600  0x100   /* Transform Engine */
-		       0x6001c800  0x100   /* Pixel prediction block */
-		       0x6001ca00  0x100   /* Video DMA */
-		       0x6001d800  0x400>; /* Video frame controls */
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
 		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
 			    "tfe", "ppb", "vdma", "frameid";
 		iram = <&vde_pool>; /* IRAM region */
@@ -428,14 +443,14 @@
 
 	apbmisc@70000800 {
 		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
 	};
 
 	pinmux: pinmux@70000868 {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd4    /* Pad control registers */
-		       0x70003000 0x3e4>; /* Mux registers */
+		reg = <0x70000868 0x0d4>, /* Pad control registers */
+		      <0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	/*
@@ -770,8 +785,8 @@
 
 	ahub@70080000 {
 		compatible = "nvidia,tegra30-ahub";
-		reg = <0x70080000 0x200
-		       0x70080200 0x100>;
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
 			 <&tegra_car TEGRA30_CLK_APBIF>;
@@ -851,41 +866,45 @@
 		};
 	};
 
-	sdhci@78000000 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000000 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000000 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000200 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000200 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000200 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000400 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000400 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000400 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000600 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000600 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000600 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
 		status = "disabled";
@@ -906,7 +925,8 @@
 
 	phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USBD>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -914,6 +934,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <9>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -943,7 +964,8 @@
 
 	phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d004000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB2>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -951,6 +973,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <9>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -979,7 +1002,8 @@
 
 	phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB3>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -987,6 +1011,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;