summaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-03-06 09:36:37 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2019-03-06 09:36:37 -0800
commit6ad63dec9c2c80710896edd1996e56c54a230870 (patch)
tree892a4124581066b9f6048646175e862d187d9c5f /arch/arm/boot
parentaebbfafc74b8d4eac573aab47aaa2e7965295096 (diff)
parenta3238924a820c1d7c977b632b769f3b5690cba09 (diff)
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC device tree updates from Arnd Bergmann: "This is a smaller update than the past few times, but with just over 500 non-merge changesets still dwarfes the rest of the SoC tree. Three new SoC platforms get added, each one a follow-up to an existing product, and added here in combination with a reference platform: - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics Applications": https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X These are actual commercial products we now support with an in-kernel device tree source file: - Bosch Guardian is a product made by Bosch Power Tools GmbH, based on the Texas Instruments AM335x chip - Winterland IceBoard is a Texas Instruments AM3874 based machine used in telescopes at the south pole and elsewhere, see commit d031773169df2 for some pointers: - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500 baseboard management controller. This is for running on the BMC. - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch used in airplanes. - Phicomm K3 is a WiFi router based on Broadcom bcm47094 - Methode Electronics uDPU FTTdp distribution point unit - X96 Max, a generic TV box based on Amlogic G12a (S905X2) - NVIDIA Shield TV (Darcy) based on Tegra210 And then there are several new SBC, evaluation, development or modular systems that we add: - Three new Rockchips rk3399 based boards: - FriendlyElec NanoPC-T4 and NanoPi M4 - Radxa ROCK Pi 4 - Five new i.MX6 family SoM modules and boards for industrial products: - Logic PD i.MX6QD SoM and evaluation baseboad - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357 microcontroller - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system in 96boards form factor - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual platform for corresponding to the latest "fast model" - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit and 64-bit mode. - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards enterprise form factor - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108 For already supported boards and SoCs, we often add support for new devices after merging the drivers. This time, the largest changes include updates for - STMicroelectronics stm32mp1, which was now formally launched last week - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip - Action Semi S700 - TI AM654x, their recently merged 64-bit SoC from the OMAP family - Various Amlogic Meson SoCs - Mediatek MT2712 - NVIDIA Tegra186 and Tegra210 - The ancient NXP lpc32xx family - Samsung s5pv210, used in some older mobile phones Many other chips see smaller updates and bugfixes beyond that" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits) ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4 dt-bindings: net: ti: deprecate cpsw-phy-sel bindings ARM: dts: am335x: switch to use phy-gmii-sel ARM: dts: am4372: switch to use phy-gmii-sel ARM: dts: dm814x: switch to use phy-gmii-sel ARM: dts: dra7: switch to use phy-gmii-sel arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference ARM: dts: exynos: Add support for secondary DAI to Odroid XU4 ARM: dts: exynos: Add support for secondary DAI to Odroid XU3 ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite ARM: dts: exynos: Add stdout path property to Arndale board ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU ARM: dts: exynos: Enable ADC on Odroid HC1 arm64: dts: sprd: Remove wildcard compatible string arm64: dts: sprd: Add SC27XX fuel gauge device arm64: dts: sprd: Add SC2731 charger device arm64: dts: sprd: Add ADC calibration support arm64: dts: sprd: Remove PMIC INTC irq trigger type arm64: dts: rockchip: Enable tsadc device on rock960 ARM: dts: rockchip: add chosen node on veyron devices ...
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/Makefile15
-rw-r--r--arch/arm/boot/dts/alphascale-asm9260.dtsi3
-rw-r--r--arch/arm/boot/dts/alpine.dtsi8
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir2110.dts4
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir3220.dts4
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir5221.dts4
-rw-r--r--arch/arm/boot/dts/am335x-chiliboard.dts8
-rw-r--r--arch/arm/boot/dts/am335x-guardian.dts511
-rw-r--r--arch/arm/boot/dts/am335x-icev2.dts4
-rw-r--r--arch/arm/boot/dts/am335x-igep0033.dtsi4
-rw-r--r--arch/arm/boot/dts/am335x-lxm.dts4
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi5
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts5
-rw-r--r--arch/arm/boot/dts/am335x-phycore-som.dtsi4
-rw-r--r--arch/arm/boot/dts/am335x-shc.dts4
-rw-r--r--arch/arm/boot/dts/am33xx-l4.dtsi17
-rw-r--r--arch/arm/boot/dts/am3874-iceboard.dts496
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts2
-rw-r--r--arch/arm/boot/dts/am437x-l4.dtsi17
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts5
-rw-r--r--arch/arm/boot/dts/arm-realview-eb.dtsi4
-rw-r--r--arch/arm/boot/dts/arm-realview-pb1176.dts4
-rw-r--r--arch/arm/boot/dts/arm-realview-pb11mp.dts4
-rw-r--r--arch/arm/boot/dts/arm-realview-pbx.dtsi4
-rw-r--r--arch/arm/boot/dts/armada-370-rd.dts42
-rw-r--r--arch/arm/boot/dts/armada-388-clearfog.dts58
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi4
-rw-r--r--arch/arm/boot/dts/armada-39x.dtsi3
-rw-r--r--arch/arm/boot/dts/armada-xp-linksys-mamba.dts47
-rw-r--r--arch/arm/boot/dts/artpec6.dtsi3
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts10
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts55
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts145
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts5
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts8
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi1
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi34
-rw-r--r--arch/arm/boot/dts/at91-nattis-2-natte-2.dts2
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1.dtsi30
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts4
-rw-r--r--arch/arm/boot/dts/at91-wb45n.dts2
-rw-r--r--arch/arm/boot/dts/at91-wb50n.dts4
-rw-r--r--arch/arm/boot/dts/at91rm9200.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9260.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9261.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9rl.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi4
-rw-r--r--arch/arm/boot/dts/atlas6-evb.dts1
-rw-r--r--arch/arm/boot/dts/atlas6.dtsi1
-rw-r--r--arch/arm/boot/dts/atlas7.dtsi1
-rw-r--r--arch/arm/boot/dts/axm55xx.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm-cygnus.dtsi9
-rw-r--r--arch/arm/boot/dts/bcm-nsp.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm11351.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm21664-garnet.dts1
-rw-r--r--arch/arm/boot/dts/bcm21664.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm23550-sparrow.dts1
-rw-r--r--arch/arm/boot/dts/bcm23550.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm28155-ap.dts1
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-a-plus.dts4
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-plus.dts4
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero-w.dts11
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero.dts4
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm2836-rpi-2-b.dts68
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts175
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts74
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts74
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts1
-rw-r--r--arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts1
-rw-r--r--arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts1
-rw-r--r--arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts1
-rw-r--r--arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts1
-rw-r--r--arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-linksys-panamera.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-netgear-r8500.dts1
-rw-r--r--arch/arm/boot/dts/bcm47094-phicomm-k3.dts71
-rw-r--r--arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts4
-rw-r--r--arch/arm/boot/dts/bcm47189-luxul-xap-810.dts4
-rw-r--r--arch/arm/boot/dts/bcm47189-tenda-ac9.dts1
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts1
-rw-r--r--arch/arm/boot/dts/bcm53573.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm63138.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm7445.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm947189acdbmr.dts1
-rw-r--r--arch/arm/boot/dts/bcm953012er.dts1
-rw-r--r--arch/arm/boot/dts/bcm953012hr.dts1
-rw-r--r--arch/arm/boot/dts/bcm953012k.dts1
-rw-r--r--arch/arm/boot/dts/cx92755.dtsi4
-rw-r--r--arch/arm/boot/dts/da850-lcdk.dts10
-rw-r--r--arch/arm/boot/dts/dm814x.dtsi79
-rw-r--r--arch/arm/boot/dts/dove.dtsi4
-rw-r--r--arch/arm/boot/dts/dra7-l4.dtsi15
-rw-r--r--arch/arm/boot/dts/ep7209.dtsi4
-rw-r--r--arch/arm/boot/dts/ep7211-edb7211.dts1
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi14
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts4
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi7
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts8
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu4.dts4
-rw-r--r--arch/arm/boot/dts/imx27.dtsi2
-rw-r--r--arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts16
-rw-r--r--arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi34
-rw-r--r--arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi555
-rw-r--r--arch/arm/boot/dts/imx6-logicpd-som.dtsi365
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts5
-rw-r--r--arch/arm/boot/dts/imx6dl-yapp4-common.dtsi595
-rw-r--r--arch/arm/boot/dts/imx6dl-yapp4-draco.dts58
-rw-r--r--arch/arm/boot/dts/imx6dl-yapp4-hydra.dts50
-rw-r--r--arch/arm/boot/dts/imx6dl-yapp4-ursa.dts54
-rw-r--r--arch/arm/boot/dts/imx6q-logicpd.dts120
-rw-r--r--arch/arm/boot/dts/imx6q-tbs2910.dts49
-rw-r--r--arch/arm/boot/dts/imx6qdl-apalis.dtsi26
-rw-r--r--arch/arm/boot/dts/imx6qdl-colibri.dtsi26
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi14
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabresd.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi19
-rw-r--r--arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi148
-rw-r--r--arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi55
-rw-r--r--arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts89
-rw-r--r--arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi329
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6ull.dtsi12
-rw-r--r--arch/arm/boot/dts/imx7ulp.dtsi19
-rw-r--r--arch/arm/boot/dts/integrator.dtsi10
-rw-r--r--arch/arm/boot/dts/integratorcp.dts89
-rw-r--r--arch/arm/boot/dts/kirkwood-dir665.dts47
-rw-r--r--arch/arm/boot/dts/kirkwood-linksys-viper.dts47
-rw-r--r--arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts47
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts9
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281.dtsi41
-rw-r--r--arch/arm/boot/dts/kirkwood.dtsi3
-rw-r--r--arch/arm/boot/dts/lpc3250-ea3250.dts20
-rw-r--r--arch/arm/boot/dts/lpc3250-phy3250.dts87
-rw-r--r--arch/arm/boot/dts/lpc32xx.dtsi32
-rw-r--r--arch/arm/boot/dts/lpc4350-hitex-eval.dts2
-rw-r--r--arch/arm/boot/dts/lpc4357-ea4357-devkit.dts2
-rw-r--r--arch/arm/boot/dts/lpc4357-myd-lpc4357.dts619
-rw-r--r--arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts1
-rw-r--r--arch/arm/boot/dts/ls1021a-qds.dts1
-rw-r--r--arch/arm/boot/dts/ls1021a-twr.dts1
-rw-r--r--arch/arm/boot/dts/ls1021a.dtsi18
-rw-r--r--arch/arm/boot/dts/meson.dtsi10
-rw-r--r--arch/arm/boot/dts/meson6-atv1200.dts1
-rw-r--r--arch/arm/boot/dts/meson6.dtsi8
-rw-r--r--arch/arm/boot/dts/meson8-minix-neo-x8.dts1
-rw-r--r--arch/arm/boot/dts/meson8.dtsi89
-rw-r--r--arch/arm/boot/dts/meson8b-ec100.dts128
-rw-r--r--arch/arm/boot/dts/meson8b-mxq.dts1
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts6
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi83
-rw-r--r--arch/arm/boot/dts/meson8m2-mxiii-plus.dts6
-rw-r--r--arch/arm/boot/dts/meson8m2.dtsi4
-rw-r--r--arch/arm/boot/dts/mmp2-brownstone.dts1
-rw-r--r--arch/arm/boot/dts/mmp2.dtsi4
-rw-r--r--arch/arm/boot/dts/moxart.dtsi3
-rw-r--r--arch/arm/boot/dts/mps2.dtsi6
-rw-r--r--arch/arm/boot/dts/mt2701-evb.dts1
-rw-r--r--arch/arm/boot/dts/mt2701.dtsi3
-rw-r--r--arch/arm/boot/dts/mt6580-evbp1.dts1
-rw-r--r--arch/arm/boot/dts/mt6580.dtsi1
-rw-r--r--arch/arm/boot/dts/mt6589-aquaris5.dts1
-rw-r--r--arch/arm/boot/dts/mt6589.dtsi3
-rw-r--r--arch/arm/boot/dts/mt6592-evb.dts2
-rw-r--r--arch/arm/boot/dts/mt6592.dtsi3
-rw-r--r--arch/arm/boot/dts/mt7623.dtsi15
-rw-r--r--arch/arm/boot/dts/mt8127-moose.dts1
-rw-r--r--arch/arm/boot/dts/mt8127.dtsi3
-rw-r--r--arch/arm/boot/dts/mt8135-evbp1.dts1
-rw-r--r--arch/arm/boot/dts/mt8135.dtsi3
-rw-r--r--arch/arm/boot/dts/nspire.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3-evm-common.dtsi7
-rw-r--r--arch/arm/boot/dts/omap3-evm-processor-common.dtsi10
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi39
-rw-r--r--arch/arm/boot/dts/omap3-gta04a5.dts2
-rw-r--r--arch/arm/boot/dts/omap4-droid4-xt894.dts10
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi6
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts30
-rw-r--r--arch/arm/boot/dts/orion5x-lacie-d2-network.dts1
-rw-r--r--arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts1
-rw-r--r--arch/arm/boot/dts/orion5x-lswsgl.dts1
-rw-r--r--arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts1
-rw-r--r--arch/arm/boot/dts/orion5x-netgear-wnr854t.dts1
-rw-r--r--arch/arm/boot/dts/orion5x-rd88f5182-nas.dts1
-rw-r--r--arch/arm/boot/dts/orion5x.dtsi4
-rw-r--r--arch/arm/boot/dts/ox810se.dtsi4
-rw-r--r--arch/arm/boot/dts/ox820.dtsi4
-rw-r--r--arch/arm/boot/dts/picoxcell-pc3x2.dtsi1
-rw-r--r--arch/arm/boot/dts/picoxcell-pc3x3.dtsi1
-rw-r--r--arch/arm/boot/dts/prima2-evb.dts1
-rw-r--r--arch/arm/boot/dts/prima2.dtsi1
-rw-r--r--arch/arm/boot/dts/pxa168.dtsi4
-rw-r--r--arch/arm/boot/dts/pxa2xx.dtsi3
-rw-r--r--arch/arm/boot/dts/pxa910.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi8
-rw-r--r--arch/arm/boot/dts/qcom-apq8084.dtsi9
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi11
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064.dtsi8
-rw-r--r--arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi1
-rw-r--r--arch/arm/boot/dts/qcom-mdm9615.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi25
-rw-r--r--arch/arm/boot/dts/qcom-msm8960.dtsi9
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts130
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi19
-rw-r--r--arch/arm/boot/dts/qcom-pm8941.dtsi1
-rw-r--r--arch/arm/boot/dts/r7s9210-rza2mevb.dts82
-rw-r--r--arch/arm/boot/dts/r7s9210.dtsi218
-rw-r--r--arch/arm/boot/dts/r8a7743.dtsi43
-rw-r--r--arch/arm/boot/dts/r8a7744.dtsi188
-rw-r--r--arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts18
-rw-r--r--arch/arm/boot/dts/r8a7778.dtsi28
-rw-r--r--arch/arm/boot/dts/r8a7779.dtsi26
-rw-r--r--arch/arm/boot/dts/r8a7790-stout.dts15
-rw-r--r--arch/arm/boot/dts/rk3036-kylin.dts1
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi1
-rw-r--r--arch/arm/boot/dts/rk3066a-bqcurie2.dts1
-rw-r--r--arch/arm/boot/dts/rk3066a-mk808.dts1
-rw-r--r--arch/arm/boot/dts/rk3066a-rayeager.dts2
-rw-r--r--arch/arm/boot/dts/rk3066a.dtsi48
-rw-r--r--arch/arm/boot/dts/rk3188-bqedison2qc.dts19
-rw-r--r--arch/arm/boot/dts/rk3188-px3-evb.dts1
-rw-r--r--arch/arm/boot/dts/rk3229-evb.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-fennec.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-miqi.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-popmetal.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-rock2-square.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-tinker-s.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-veyron.dtsi4
-rw-r--r--arch/arm/boot/dts/rk3288-vyasa.dts1
-rw-r--r--arch/arm/boot/dts/rv1108-elgin-r1.dts208
-rw-r--r--arch/arm/boot/dts/rv1108-evb.dts20
-rw-r--r--arch/arm/boot/dts/rv1108.dtsi37
-rw-r--r--arch/arm/boot/dts/s3c2416-smdk2416.dts5
-rw-r--r--arch/arm/boot/dts/s5pv210-aries.dtsi90
-rw-r--r--arch/arm/boot/dts/s5pv210-fascinate4g.dts7
-rw-r--r--arch/arm/boot/dts/s5pv210-galaxys.dts7
-rw-r--r--arch/arm/boot/dts/s5pv210.dtsi25
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi4
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi4
-rw-r--r--arch/arm/boot/dts/sama5d4.dtsi4
-rw-r--r--arch/arm/boot/dts/skeleton.dtsi18
-rw-r--r--arch/arm/boot/dts/skeleton64.dtsi14
-rw-r--r--arch/arm/boot/dts/socfpga.dtsi16
-rw-r--r--arch/arm/boot/dts/socfpga_arria10.dtsi18
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts130
-rw-r--r--arch/arm/boot/dts/spear13xx.dtsi4
-rw-r--r--arch/arm/boot/dts/spear3xx.dtsi4
-rw-r--r--arch/arm/boot/dts/spear600.dtsi4
-rw-r--r--arch/arm/boot/dts/ste-nomadik-nhk15.dts85
-rw-r--r--arch/arm/boot/dts/ste-nomadik-stn8815.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-u300.dts2
-rw-r--r--arch/arm/boot/dts/stm32429i-eval.dts1
-rw-r--r--arch/arm/boot/dts/stm32746g-eval.dts1
-rw-r--r--arch/arm/boot/dts/stm32f429-disco.dts1
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi64
-rw-r--r--arch/arm/boot/dts/stm32f469-disco.dts1
-rw-r--r--arch/arm/boot/dts/stm32f746-disco.dts1
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32f769-disco.dts1
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32h743i-disco.dts1
-rw-r--r--arch/arm/boot/dts/stm32h743i-eval.dts1
-rw-r--r--arch/arm/boot/dts/stm32mp157-pinctrl.dtsi7
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts8
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ev1.dts10
-rw-r--r--arch/arm/boot/dts/stm32mp157c.dtsi97
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi44
-rw-r--r--arch/arm/boot/dts/sun5i-a13-q8-tablet.dts7
-rw-r--r--arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapi.dts5
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi175
-rw-r--r--arch/arm/boot/dts/sun8i-a23-q8-tablet.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-a23.dtsi20
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi194
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts8
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts8
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts25
-rw-r--r--arch/arm/boot/dts/sun8i-q8-common.dtsi37
-rw-r--r--arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts41
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi15
-rw-r--r--arch/arm/boot/dts/sun9i-a80-cubieboard4.dts44
-rw-r--r--arch/arm/boot/dts/sun9i-a80-optimus.dts44
-rw-r--r--arch/arm/boot/dts/sun9i-a80.dtsi65
-rw-r--r--arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi16
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi3
-rw-r--r--arch/arm/boot/dts/tegra114-dalmore.dts2
-rw-r--r--arch/arm/boot/dts/tegra124-jetson-tk1.dts2
-rw-r--r--arch/arm/boot/dts/tegra124-nyan.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124-venice2.dts2
-rw-r--r--arch/arm/boot/dts/tegra20-trimslice.dts2
-rw-r--r--arch/arm/boot/dts/tegra30-beaver.dts2
-rw-r--r--arch/arm/boot/dts/tegra30-cardhu.dtsi2
-rw-r--r--arch/arm/boot/dts/versatile-ab.dts2
-rw-r--r--arch/arm/boot/dts/vexpress-v2m-rs1.dtsi2
-rw-r--r--arch/arm/boot/dts/vexpress-v2m.dtsi2
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts5
-rw-r--r--arch/arm/boot/dts/vf610-bk4.dts31
-rw-r--r--arch/arm/boot/dts/vf610-zii-cfu1.dts2
-rw-r--r--arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts311
-rw-r--r--arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts3
-rw-r--r--arch/arm/boot/dts/vt8500.dtsi9
-rw-r--r--arch/arm/boot/dts/wm8505.dtsi9
-rw-r--r--arch/arm/boot/dts/wm8650.dtsi9
-rw-r--r--arch/arm/boot/dts/wm8750.dtsi9
-rw-r--r--arch/arm/boot/dts/wm8850.dtsi9
-rw-r--r--arch/arm/boot/dts/zx296702-ad1.dts1
-rw-r--r--arch/arm/boot/dts/zx296702.dtsi4
-rw-r--r--arch/arm/boot/dts/zynq-zturn.dts2
326 files changed, 8430 insertions, 1227 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bd40148a15b2..ebe409a3f0e6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-a-plus.dtb \
bcm2835-rpi-cm1-io1.dtb \
bcm2836-rpi-2-b.dtb \
+ bcm2837-rpi-3-a-plus.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb \
@@ -115,6 +116,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
+ bcm47094-phicomm-k3.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
@@ -313,7 +315,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
dtb-$(CONFIG_ARCH_LPC18XX) += \
lpc4337-ciaa.dtb \
lpc4350-hitex-eval.dtb \
- lpc4357-ea4357-devkit.dtb
+ lpc4357-ea4357-devkit.dtb \
+ lpc4357-myd-lpc4357.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += \
lpc3250-ea3250.dtb \
lpc3250-phy3250.dtb
@@ -445,6 +448,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
imx6dl-wandboard-revd1.dtb \
+ imx6dl-yapp4-draco.dtb \
+ imx6dl-yapp4-hydra.dtb \
+ imx6dl-yapp4-ursa.dtb \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
imx6q-apalis-ixora-v1.1.dtb \
@@ -561,6 +567,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-opos6uldev.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-pico-pi.dtb \
+ imx6ul-phytec-phyboard-segin-full.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
@@ -599,6 +606,7 @@ dtb-$(CONFIG_SOC_VF610) += \
vf610-zii-dev-rev-b.dtb \
vf610-zii-dev-rev-c.dtb \
vf610-zii-scu4-aib.dtb \
+ vf610-zii-ssmb-dtu.dtb \
vf610-zii-ssmb-spu3.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
@@ -700,6 +708,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-thunder.dtb \
omap3-zoom3.dtb
dtb-$(CONFIG_SOC_TI81XX) += \
+ am3874-iceboard.dtb \
dm8148-evm.dtb \
dm8148-t410.dtb \
dm8168-evm.dtb \
@@ -719,6 +728,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-cm-t335.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
+ am335x-guardian.dtb \
am335x-icev2.dtb \
am335x-lxm.dtb \
am335x-moxa-uc-2101.dtb \
@@ -843,6 +853,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
r7s72100-genmai.dtb \
r7s72100-gr-peach.dtb \
r7s72100-rskrza1.dtb \
+ r7s9210-rza2mevb.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7743-iwg20d-q7.dtb \
@@ -868,6 +879,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
r9a06g032-rzn1d400-db.dtb \
sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ rv1108-elgin-r1.dtb \
rv1108-evb.dtb \
rk3036-evb.dtb \
rk3036-kylin.dtb \
@@ -919,6 +931,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria10_socdk_nand.dtb \
socfpga_arria10_socdk_qspi.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
+ socfpga_cyclone5_chameleon96.dtb \
socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_de0_nano_soc.dtb \
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi
index 907fc7bfc418..2ce6038536fd 100644
--- a/arch/arm/boot/dts/alphascale-asm9260.dtsi
+++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi
@@ -4,10 +4,11 @@
* Licensed under the X11 license or the GPL v2 (or later)
*/
-#include "skeleton.dtsi"
#include <dt-bindings/clock/alphascale,asm9260.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&icoll>;
memory {
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index 731df7a8c4e6..d3036ea823d1 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -25,12 +25,18 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
/* SOC compatibility */
compatible = "al,alpine";
+ memory {
+ device_type = "memory";
+ reg = <0 0 0 0>;
+ };
+
/* CPU Configuration */
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 75de1e723303..50dcf1290ac6 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -72,7 +72,3 @@
dual_emac_res_vlan = <2>;
phy-handle = <&phy1>;
};
-
-&phy_sel {
- rmii-clock-ext = <1>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index 1b215c425c57..f3f1abd26470 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -114,7 +114,3 @@
dual_emac_res_vlan = <2>;
phy-handle = <&phy1>;
};
-
-&phy_sel {
- rmii-clock-ext = <1>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 832ead864dc5..42f473f0ed77 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -133,10 +133,6 @@
phy-handle = <&phy1>;
};
-&phy_sel {
- rmii-clock-ext = <1>;
-};
-
&dcan1 {
pinctrl-names = "default";
pinctrl-0 = <&dcan1_pins>;
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 9c2a947aacf5..bffa5dce54ec 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -14,6 +14,10 @@
compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
"ti,am33xx";
+ chosen {
+ stdout-path = &uart0;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -151,10 +155,6 @@
phy-mode = "rmii";
};
-&phy_sel {
- rmii-clock-ext;
-};
-
/* USB */
&usb {
status = "okay";
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
new file mode 100644
index 000000000000..c9611ea4b884
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Bosch AM335x Guardian";
+ compatible = "bosch,am335x-guardian", "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ tick-timer = &timer2;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+
+ button21 {
+ label = "guardian-power-button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio2 21 0>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ led1 {
+ label = "green:heartbeat";
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "green:mmc0";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ };
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+
+ display-timings {
+ 320x240 {
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <68>;
+ hfront-porch = <20>;
+ hsync-len = <1>;
+ vback-porch = <18>;
+ vfront-porch = <4>;
+ vsync-len = <1>;
+ clock-frequency = <9000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <24>;
+ bus-width = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ };
+
+ pwm7: dmtimer-pwm {
+ compatible = "ti,omap-dmtimer-pwm";
+ ti,timers = <&timer7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dmtimer7_pins>;
+ };
+
+ vmmcsd_fixed: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
+ status = "okay";
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-ecc-opt = "bch16";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ /*
+ * MTD partition table
+ *
+ * All SPL-* partitions are sized to minimal length which can
+ * be independently programmable. For NAND flash this is equal
+ * to size of erase-block.
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@1 {
+ label = "SPL.backup1";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition@2 {
+ label = "SPL.backup2";
+ reg = <0x80000 0x40000>;
+ };
+
+ partition@3 {
+ label = "SPL.backup3";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@4 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>;
+ };
+
+ partition@5 {
+ label = "u-boot.backup1";
+ reg = <0x200000 0x100000>;
+ };
+
+ partition@6 {
+ label = "u-boot-env";
+ reg = <0x300000 0x40000>;
+ };
+
+ partition@7 {
+ label = "u-boot-env.backup1";
+ reg = <0x340000 0x40000>;
+ };
+
+ partition@8 {
+ label = "UBI";
+ reg = <0x380000 0x1fc80000>;
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+};
+
+&lcdc {
+ blue-and-red-wiring = "crossed";
+ status = "okay";
+};
+
+&mmc1 {
+ bus-width = <0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ clock-names = "ext-clk", "int-clk";
+ system-power-controller;
+};
+
+&spi0 {
+ ti,pindir-d0-out-d1-in;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+ ti,pmic-shutdown-controller;
+ interrupt-parent = <&intc>;
+ interrupts = <7>; /* NMI */
+
+ backlight {
+ isel = <1>; /* 1 - ISET1, 2 ISET2 */
+ fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+ default-brightness = <100>;
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3a";
+ regulator-always-on;
+ };
+ };
+};
+
+&tscadc {
+ status = "okay";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin &gpio_pins>;
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+
+ dmtimer7_pins: pinmux_dmtimer7_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
+ >;
+ };
+
+ gpio_keys_pins: pinmux_gpio_keys_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+ >;
+ };
+
+ gpio_pins: pinmux_gpio_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ lcd_disen_pins: pinmux_lcd_disen_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
+ >;
+ };
+
+ lcd_pins_default: pinmux_lcd_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ >;
+ };
+
+ lcd_pins_sleep: pinmux_lcd_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ >;
+ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+ >;
+ };
+
+ spi0_pins: pinmux_spi0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ nandflash_pins: pinmux_nandflash_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index f2005ecca74f..9ac775c71072 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -484,10 +484,6 @@
dual_emac;
};
-&phy_sel {
- rmii-clock-ext;
-};
-
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 55b4c94cfafb..cbd22f25de95 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -123,10 +123,6 @@
phy-mode = "rmii";
};
-&phy_sel {
- rmii-clock-ext;
-};
-
&elm {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 481edcfaf121..d0e8e720a4d6 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -328,10 +328,6 @@
dual_emac_res_vlan = <3>;
};
-&phy_sel {
- rmii-clock-ext;
-};
-
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 14f781953475..cb5913a69837 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -159,11 +159,6 @@
status = "okay";
};
-&phy_sel {
- reg= <0x44e10650 0xf5>;
- rmii-clock-ext;
-};
-
&sham {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
index 5a58efc0c874..e562ce40f290 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -446,11 +446,6 @@
dual_emac_res_vlan = <2>;
};
-&phy_sel {
- reg= <0x44e10650 0xf5>;
- rmii-clock-ext;
-};
-
&sham {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 428a25e952b0..015adb626b03 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -100,10 +100,6 @@
status = "okay";
};
-&phy_sel {
- rmii-clock-ext;
-};
-
/* I2C Busses */
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 5b250060f6dd..bfbe27a80006 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -1,11 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* support for the bosch am335x based shc c3 board
*
* Copyright, C) 2015 Heiko Schocher <hs@denx.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 7b818d9d2eab..f459ec316a22 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -279,17 +279,9 @@
#pinctrl-cells = <1>;
ranges = <0 0 0x2000>;
- phy_sel: cpsw-phy-sel@650 {
- compatible = "ti,am3352-cpsw-phy-sel";
- reg= <0x650 0x4>;
- reg-names = "gmii-sel";
- };
-
am33xx_pinmux: pinmux@800 {
compatible = "pinctrl-single";
reg = <0x800 0x238>;
- #address-cells = <1>;
- #size-cells = <0>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x7f>;
@@ -302,6 +294,12 @@
#size-cells = <1>;
ranges = <0 0 0x800>;
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,am3352-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <2>;
+ };
+
scm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
@@ -717,7 +715,6 @@
interrupts = <40 41 42 43>;
ranges = <0 0 0x8000>;
syscon = <&scm_conf>;
- cpsw-phy-sel = <&phy_sel>;
status = "disabled";
davinci_mdio: mdio@1000 {
@@ -733,11 +730,13 @@
cpsw_emac0: slave@200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 1>;
};
cpsw_emac1: slave@300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 1>;
};
};
};
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
new file mode 100644
index 000000000000..883fb85135d4
--- /dev/null
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Winterland IceBoard
+ *
+ * http://mcgillcosmology.com
+ * http://threespeedlogic.com
+ *
+ * This is an ARM + FPGA instrumentation board used at telescopes in
+ * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO
+ * observatory in British Columbia (CHIME).
+ *
+ * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com>
+ */
+
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Winterland IceBoard";
+ compatible = "ti,dm8148", "ti,dm814";
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ bootargs = "earlycon";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+/* The MAC provides internal delay for the transmit path ONLY, which is enabled
+ * provided no -id/-txid/-rxid suffix is provided to "phy-mode".
+ *
+ * The receive path is delayed at the PHY. The recommended register settings
+ * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the
+ * conversion code in the kernel lies: the PHY's registers are 120 ps per tap,
+ * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to
+ * obtain the correct register settings.
+ */
+&mac { dual_emac = <1>; };
+&cpsw_emac0 {
+ phy-handle = <&ethphy0>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+&cpsw_emac1 {
+ phy-handle = <&ethphy1>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0x2>;
+
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+
+ rxd3-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+
+ phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <0x1>;
+
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+
+ rxd3-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+
+ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc1 { status = "disabled"; };
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+};
+&mmc3 { status = "disabled"; };
+
+&i2c1 {
+ /* Most I2C activity happens through this port, with the sole exception
+ * of the backplane. Since there are multiply assigned addresses, the
+ * "i2c-mux-idle-disconnect" is important.
+ */
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ /* FMC A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ i2c-mux-idle-disconnect;
+ };
+
+ i2c@1 {
+ /* FMC B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ i2c-mux-idle-disconnect;
+ };
+
+ i2c@2 {
+ /* QSFP A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ i2c-mux-idle-disconnect;
+ };
+
+ i2c@3 {
+ /* QSFP B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ i2c-mux-idle-disconnect;
+ };
+
+ i2c@4 {
+ /* SFP */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ i2c-mux-idle-disconnect;
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ i2c-mux-idle-disconnect;
+
+ ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
+ ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
+ ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; };
+
+ ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; };
+ ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; };
+ ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; };
+
+ ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; };
+ ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; };
+ ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; };
+ ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; };
+ ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; };
+ ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; };
+ ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; };
+ ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; };
+ ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; };
+ };
+
+ i2c@6 {
+ /* Backplane */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ i2c-mux-idle-disconnect;
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ i2c-mux-idle-disconnect;
+
+ u41: pca9575@20 {
+ compatible = "nxp,pca9575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C",
+ "FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
+ "FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
+ "FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
+ reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ u42: pca9575@21 {
+ compatible = "nxp,pca9575";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL",
+ "QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
+ "SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
+ "QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
+ reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ u48: pca9575@22 {
+ compatible = "nxp,pca9575";
+ reg=<0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>,
+ <&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>;
+ led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>,
+ <&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>;
+
+ gpio-line-names =
+ "GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4",
+ "GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
+ "GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
+ "GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
+ reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ u59: pca9575@23 {
+ compatible = "nxp,pca9575";
+ reg=<0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12",
+ "GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
+ "BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
+ "BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
+ reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };
+ tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; };
+ tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; };
+ tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; };
+
+ /* EEPROM bank and serial number are treated as separate devices */
+ at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; };
+ at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
+ };
+ };
+};
+
+&i2c2 {
+ pca9548@71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@6 {
+ /* Backplane */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ multi-master;
+
+ /* All backplanes should have this -- it's how we know they're there. */
+ at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; };
+ at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
+
+ /* 16 slot backplane */
+ tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; };
+ tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; };
+ ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; };
+ amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; };
+
+ /* Single slot backplane */
+ };
+ };
+};
+
+&pincntl {
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
+ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
+ DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
+ DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
+ DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
+ DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
+ DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40) /* SD1_POW */
+ DM814X_IOPAD(0x0928, PIN_INPUT | 0x40) /* SD1_SDWP */
+ DM814X_IOPAD(0x093C, PIN_INPUT | 0x2) /* SD1_SDCD */
+ >;
+ };
+
+ usb0_pins: pinmux_usb0_pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */
+ >;
+ };
+
+ gpio1_pins: pinmux_gpio1_pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80) /* PROGRAM_B */
+ DM814X_IOPAD(0x0820, PIN_INPUT | 0x80) /* INIT_B */
+ DM814X_IOPAD(0x0824, PIN_INPUT | 0x80) /* DONE */
+
+ DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */
+ DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */
+ DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */
+ DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */
+ DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */
+
+ DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */
+ DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */
+ DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */
+ DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */
+ DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */
+
+ DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */
+ DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */
+ DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */
+ DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */
+ >;
+ };
+
+ gpio2_pins: pinmux_gpio2_pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */
+ DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */
+ DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */
+ DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */
+
+ //DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */
+ //DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */
+ DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */
+ >;
+ };
+
+ gpio4_pins: pinmux_gpio4_pins {
+ pinctrl-single,pins = <
+ /* The PLL doesn't react well to the SPI controller reset, so
+ * we force the CS lines to pull up as GPIOs until we're ready.
+ * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3
+ */
+ DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */
+ DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */
+ DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */
+ DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */
+ DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */
+ DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */
+ >;
+ };
+
+ spi2_pins: pinmux_spi2_pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */
+ DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */
+ >;
+ };
+
+ spi4_pins: pinmux_spi4_pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0a7c, 0x20)
+ DM814X_IOPAD(0x0b74, 0x20)
+ DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20)
+ DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20)
+ DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20)
+ >;
+ };
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+ gpio-line-names =
+ "", "PROGRAM_B", "INIT_B", "DONE", /* 0-3 */
+ "", "", "", "", /* 4-7 */
+ "FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI", /* 8-11 */
+ "", "", "", "FMCA_TRST", /* 12-15 */
+ "FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI", /* 16-19 */
+ "FMCB_TRST", "", "", "", /* 20-23 */
+ "FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI", /* 24-27 */
+ "", "", "", ""; /* 28-31 */
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_pins>;
+ gpio-line-names =
+ "PHYA_IRQ_N", "PHYA_RESET_N", "", "", /* 0-3 */
+ "", "", "", "PHYB_IRQ_N", /* 4-7 */
+ "PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", ""; /* 8-11 */
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ /*pinctrl-0 = <&gpio3_pins>;*/
+ gpio-line-names =
+ "", "", "ARMClkSel0", "", /* 0-3 */
+ "EnFPGARef", "", "", "ARMClkSel1"; /* 4-7 */
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio4_pins>;
+ gpio-line-names =
+ "BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3",
+ "BP_ARM_GPIO4", "BP_ARM_GPIO5";
+};
+
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ dr_mode = "host";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ dr_mode = "host";
+};
+
+&mcspi1 {
+ s25fl256@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ fsbl@0 {
+ /* 256 kB */
+ label = "U-Boot-min";
+ reg = <0 0x40000>;
+ };
+ ssbl@1 {
+ /* 512 kB */
+ label = "U-Boot";
+ reg = <0x40000 0x80000>;
+ };
+ bootenv@2 {
+ /* 256 kB */
+ label = "U-Boot Env";
+ reg = <0xc0000 0x40000>;
+ };
+ kernel@3 {
+ /* 4 MB */
+ label = "Kernel";
+ reg = <0x100000 0x400000>;
+ };
+ ipmi@4 {
+ label = "IPMI FRU";
+ reg = <0x500000 0x40000>;
+ };
+ fs@5 {
+ label = "File System";
+ reg = <0x540000 0x1ac0000>;
+ };
+ };
+};
+
+&mcspi3 {
+ /* DMA event numbers stolen from MCASP */
+ dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17
+ &edma_xbar 10 0 18 &edma_xbar 11 0 19>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
+&mcspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_pins>;
+
+ /* DMA event numbers stolen from MCASP, MCBSP */
+ dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>;
+ dma-names = "tx0", "rx0";
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index f4a20cade808..4c6ee37ea573 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -71,7 +71,7 @@
pinctrl-0 = <&matrix_keypad_default>;
pinctrl-1 = <&matrix_keypad_sleep>;
- linux,wakeup;
+ wakeup-source;
row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index ca0896f80248..85c6f4ff1824 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -280,12 +280,6 @@
#size-cells = <1>;
ranges = <0 0 0x4000>;
- phy_sel: cpsw-phy-sel@650 {
- compatible = "ti,am43xx-cpsw-phy-sel";
- reg= <0x650 0x4>;
- reg-names = "gmii-sel";
- };
-
am43xx_pinmux: pinmux@800 {
compatible = "ti,am437-padconf",
"pinctrl-single";
@@ -300,11 +294,17 @@
};
scm_conf: scm_conf@0 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x0 0x800>;
#address-cells = <1>;
#size-cells = <1>;
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,am43xx-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <2>;
+ };
+
scm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
@@ -555,7 +555,6 @@
cpts_clock_shift = <29>;
ranges = <0 0 0x8000>;
syscon = <&scm_conf>;
- cpsw-phy-sel = <&phy_sel>;
davinci_mdio: mdio@1000 {
compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
@@ -572,11 +571,13 @@
cpsw_emac0: slave@200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
};
cpsw_emac1: slave@300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
};
};
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 4ea753b3ee43..9dfd80e3b76e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -584,10 +584,7 @@
&cpsw_emac0 {
phy-handle = <&ethphy0>;
phy-mode = "rmii";
-};
-
-&phy_sel {
- rmii-clock-ext;
+ phys = <&phy_gmii_sel 1 1>;
};
&i2c0 {
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 0e4c7c4c8c09..610506723ea5 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -22,9 +22,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "arm,realview-eb";
chosen { };
@@ -38,6 +39,7 @@
};
memory {
+ device_type = "memory";
/* 128 MiB memory @ 0x0 */
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 83e0fbc4a1a1..cbbb8878daa3 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -23,9 +23,10 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "ARM RealView PB1176";
compatible = "arm,realview-pb1176";
@@ -40,6 +41,7 @@
};
memory {
+ device_type = "memory";
/* 128 MiB memory @ 0x0 */
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 2f6aa24a0b67..2015619ca22c 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -23,9 +23,10 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "ARM RealView PB11MPcore";
compatible = "arm,realview-pb11mp";
@@ -39,6 +40,7 @@
};
memory {
+ device_type = "memory";
/*
* The PB11MPCore has 512 MiB memory @ 0x70000000
* and the first 256 are also remapped @ 0x00000000
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 916a97734f84..a81e9c282432 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -22,9 +22,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "arm,realview-pbx";
chosen { };
@@ -39,6 +40,7 @@
};
memory {
+ device_type = "memory";
/* 128 MiB memory @ 0x0 */
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 2bfb3108b5b2..c910d157a686 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -114,48 +114,6 @@
};
};
};
-
- dsa {
- status = "disabled";
-
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- dsa,ethernet = <&eth1>;
- dsa,mii-bus = <&mdio>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "lan0";
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
- };
- };
};
&pciec {
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 89a354b43978..20f8d4667753 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -30,64 +30,6 @@
};
};
- dsa@0 {
- status = "disabled";
-
- compatible = "marvell,dsa";
- dsa,ethernet = <&eth1>;
- dsa,mii-bus = <&mdio>;
- pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
- pinctrl-names = "default";
- #address-cells = <2>;
- #size-cells = <0>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4 0>;
-
- port@0 {
- reg = <0>;
- label = "lan5";
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- };
-
- port@4 {
- reg = <4>;
- label = "lan1";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
-
- port@6 {
- /* 88E1512 external phy */
- reg = <6>;
- label = "lan6";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&rear_button_pins>;
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 7b2e2bd6479b..96c18703e471 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -9,13 +9,15 @@
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*/
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
model = "Marvell Armada 38x family SoC";
compatible = "marvell,armada380";
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index f0c949831efb..b1b86934c688 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -7,13 +7,14 @@
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*/
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Marvell Armada 39x family SoC";
compatible = "marvell,armada390";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 7a2606c3b62e..8480a16919a0 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -210,53 +210,6 @@
compatible = "pwm-fan";
pwms = <&gpio0 24 4000>;
};
-
- dsa {
- status = "disabled";
-
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- dsa,ethernet = <&eth0>;
- dsa,mii-bus = <&mdio>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "lan4";
- };
-
- port@1 {
- reg = <1>;
- label = "lan3";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan1";
- };
-
- port@4 {
- reg = <4>;
- label = "internet";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
- };
- };
};
&pciec {
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 3e4115c2cd75..037157e6c5ee 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -43,9 +43,10 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/dma/nbpfaxi.h>
#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "axis,artpec6";
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
index bdfd8c9f3a7c..521afbea2c5b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -173,6 +173,16 @@
};
};
};
+
+ dps650ab@58 {
+ compatible = "delta,dps650ab";
+ reg = <0x58>;
+ };
+
+ dps650ab@59 {
+ compatible = "delta,dps650ab";
+ reg = <0x59>;
+ };
};
&i2c9 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index f8e7b71af7e6..4c2dcac738e8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -21,6 +21,17 @@
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
};
&fmc {
@@ -43,6 +54,16 @@
};
};
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+ // Enable lpc clock
+ status = "okay";
+};
+
&uart1 {
// Host Console
status = "okay";
@@ -51,11 +72,33 @@
&pinctrl_rxd1_default>;
};
+&uart2 {
+ // SoL Host Console
+ status = "okay";
+};
+
+&uart3 {
+ // SoL BMC Console
+ status = "okay";
+};
+
&uart5 {
// BMC Console
status = "okay";
};
+&kcs2 {
+ // BMC KCS channel 2
+ status = "okay";
+ kcs_addr = <0xca8>;
+};
+
+&kcs3 {
+ // BMC KCS channel 3
+ status = "okay";
+ kcs_addr = <0xca2>;
+};
+
&mac0 {
status = "okay";
@@ -64,6 +107,10 @@
use-ncsi;
};
+&adc {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
@@ -122,6 +169,10 @@
&i2c8 {
status = "okay";
+ tmp421@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
//Mezz Sensor SMBus
};
@@ -140,7 +191,7 @@
};
fan@1 {
- reg = <0x00>;
- aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
};
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 000000000000..2337ee23f5c4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "ON5263M5 BMC";
+ compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421@4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+
+ tmp112@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ adm1278@11 {
+ compatible = "adi,adm1278";
+ reg = <0x11>;
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+};
+
+&adc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index 9aa1d4467453..b854ac0bae9a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -169,6 +169,11 @@
&i2c3 {
status = "okay";
+
+ occ-hwmon@50 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x50>;
+ };
};
&i2c4 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
index 385c0f4b69ee..0d7c6339da46 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -116,6 +116,10 @@
status = "okay";
};
+&lpc_ctrl {
+ status = "okay";
+};
+
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
@@ -134,6 +138,10 @@
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
+&uart1 {
+ status = "okay";
+};
+
&uart5 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 69f6b9d2e7e7..9549f867aa1e 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -197,6 +197,7 @@
gpio-ranges = <&pinctrl 0 0 220>;
clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
+ #interrupt-cells = <2>;
};
timer: timer@1e782000 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8..3e4ed081505c 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -250,6 +250,7 @@
gpio-ranges = <&pinctrl 0 0 220>;
clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
+ #interrupt-cells = <2>;
};
timer: timer@1e782000 {
@@ -330,8 +331,32 @@
ranges = <0x0 0x1e789000 0x1000>;
lpc_bmc: lpc-bmc@0 {
- compatible = "aspeed,ast2500-lpc-bmc";
+ compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
reg = <0x0 0x80>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x80>;
+
+ kcs1: kcs1@0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ interrupts = <8>;
+ kcs_chan = <1>;
+ status = "disabled";
+ };
+ kcs2: kcs2@0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ interrupts = <8>;
+ kcs_chan = <2>;
+ status = "disabled";
+ };
+ kcs3: kcs3@0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ interrupts = <8>;
+ kcs_chan = <3>;
+ status = "disabled";
+ };
};
lpc_host: lpc-host@80 {
@@ -343,6 +368,13 @@
#size-cells = <1>;
ranges = <0x0 0x80 0x1e0>;
+ kcs4: kcs4@0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ interrupts = <8>;
+ kcs_chan = <4>;
+ status = "disabled";
+ };
+
lpc_ctrl: lpc-ctrl@0 {
compatible = "aspeed,ast2500-lpc-ctrl";
reg = <0x0 0x80>;
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 0f6d335125e2..f245944bd5d7 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -22,7 +22,7 @@
wakeup {
label = "Wakeup";
linux,code = <10>;
- gpio-key,wakeup;
+ wakeup-source;
gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index cf0087b4c9e1..33a159c0163f 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -62,6 +62,20 @@
ahb {
apb {
+ qspi1: spi@f0024000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi1_default>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+ };
+ };
+
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
@@ -78,6 +92,22 @@
pinctrl@fc038000 {
+ pinctrl_qspi1_default: qspi1_default {
+ sck_cs {
+ pinmux = <PIN_PB5__QSPI1_SCK>,
+ <PIN_PB6__QSPI1_CS>;
+ bias-disable;
+ };
+
+ data {
+ pinmux = <PIN_PB7__QSPI1_IO0>,
+ <PIN_PB8__QSPI1_IO1>,
+ <PIN_PB9__QSPI1_IO2>,
+ <PIN_PB10__QSPI1_IO3>;
+ bias-pull-up;
+ };
+ };
+
pinctrl_macb0_default: macb0_default {
pinmux = <PIN_PD9__GTXCK>,
<PIN_PD10__GTXEN>,
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 4a258867ddf1..a48180555ef5 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -109,6 +109,10 @@
status = "okay";
};
+ qspi1: spi@f0024000 {
+ status = "okay";
+ };
+
spi0: spi@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>;
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 5b9512a6c89c..54d130c92185 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -22,7 +22,7 @@
label = "IRQBTN";
linux,code = <99>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index 8cecc7051a86..a5e45bb95c04 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -23,7 +23,7 @@
label = "BTNESC";
linux,code = <1>; /* ESC button */
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
};
irqbtn@31 {
@@ -31,7 +31,7 @@
label = "IRQBTN";
linux,code = <99>; /* SysReq button */
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup = <1>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 2ad69a7fbc00..5a882a053816 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -10,13 +10,14 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91RM9200 family SoC";
compatible = "atmel,at91rm9200";
interrupt-parent = <&aic>;
@@ -49,6 +50,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 7cd9c3bc4dfb..3b58b94b53c9 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -8,13 +8,14 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91SAM9260 family SoC";
compatible = "atmel,at91sam9260";
interrupt-parent = <&aic>;
@@ -46,6 +47,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 01d700b63b45..a907a1fdd24c 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -6,13 +6,14 @@
* Licensed under GPLv2 only.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91SAM9261 family SoC";
compatible = "atmel,at91sam9261";
interrupt-parent = <&aic>;
@@ -43,6 +44,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index c5766da4e54e..3fb63d81f18e 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -6,13 +6,14 @@
* Licensed under GPLv2 only.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91SAM9263 family SoC";
compatible = "atmel,at91sam9263";
interrupt-parent = <&aic>;
@@ -45,6 +46,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index d16db1fa7e15..f36819607131 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -9,7 +9,6 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +16,8 @@
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91SAM9G45 family SoC";
compatible = "atmel,at91sam9g45";
interrupt-parent = <&aic>;
@@ -51,6 +52,7 @@
};
memory {
+ device_type = "memory";
reg = <0x70000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 37cb81f457b5..f71d65e6e510 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -7,7 +7,6 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -15,6 +14,8 @@
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91SAM9N12 SoC";
compatible = "atmel,at91sam9n12";
interrupt-parent = <&aic>;
@@ -47,6 +48,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 3862ff2f26e0..6b5777f3c20b 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -7,7 +7,6 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -15,6 +14,8 @@
#include <dt-bindings/pwm/pwm.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91SAM9RL family SoC";
compatible = "atmel,at91sam9rl", "atmel,at91sam9";
interrupt-parent = <&aic>;
@@ -48,6 +49,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 07443a387a8f..79c4956d3902 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -9,7 +9,6 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +16,8 @@
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel AT91SAM9x5 family SoC";
compatible = "atmel,at91sam9x5";
interrupt-parent = <&aic>;
@@ -49,6 +50,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts
index ab042ca8dea1..40882419309d 100644
--- a/arch/arm/boot/dts/atlas6-evb.dts
+++ b/arch/arm/boot/dts/atlas6-evb.dts
@@ -15,6 +15,7 @@
compatible = "sirf,atlas6-cb", "sirf,atlas6";
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 29598667420b..5587b98032a3 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -6,7 +6,6 @@
* Licensed under GPLv2 or later.
*/
-/include/ "skeleton.dtsi"
/ {
compatible = "sirf,atlas6";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
index 83449b33de6b..f3de9af35b4d 100644
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -6,7 +6,6 @@
* Licensed under GPLv2 or later.
*/
-/include/ "skeleton.dtsi"
/ {
compatible = "sirf,atlas7";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
index 47799f59faa5..2a93d3ee3b66 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -12,9 +12,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/lsi,axm5516-clks.h>
-#include "skeleton64.dtsi"
-
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
interrupt-parent = <&gic>;
aliases {
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 253df7170a4e..5f7b46503a51 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -34,9 +34,9 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/bcm-cygnus.h>
-#include "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "brcm,cygnus";
model = "Broadcom Cygnus SoC";
interrupt-parent = <&gic>;
@@ -45,6 +45,11 @@
ethernet0 = &eth0;
};
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 0d2538b46139..6925b30c2253 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -34,9 +34,9 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/bcm-nsp.h>
-#include "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "brcm,nsp";
model = "Broadcom Northstar Plus SoC";
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index db7cded1b7ad..b99c2e579622 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -16,9 +16,9 @@
#include "dt-bindings/clock/bcm281xx.h"
-#include "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "BCM11351 SoC";
compatible = "brcm,bcm11351";
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index e87cb26ddf84..8b045cfab64b 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -22,6 +22,7 @@
compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
memory {
+ device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 266f2611dc22..758daa334148 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -16,9 +16,9 @@
#include "dt-bindings/clock/bcm21664.h"
-#include "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "BCM21664 SoC";
compatible = "brcm,bcm21664";
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts
index 4d525ccb48c8..1c66b15f3013 100644
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ b/arch/arm/boot/dts/bcm23550-sparrow.dts
@@ -46,6 +46,7 @@
};
memory {
+ device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
index a7a643f38385..701198f5f498 100644
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -36,9 +36,9 @@
/* BCM23550 and BCM21664 have almost identical clocks */
#include "dt-bindings/clock/bcm21664.h"
-#include "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "BCM23550 SoC";
compatible = "brcm,bcm23550";
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 9ce91dd60cb6..fbfca83bd28f 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -22,6 +22,7 @@
compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
memory {
+ device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 2cd9c5e4f892..db8a6017f220 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -31,8 +31,8 @@
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
- gpio-line-names = "SDA0",
- "SCL0",
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
"SDA1",
"SCL1",
"GPIO_GCLK",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index cfbdaacbaeba..1e40d672b055 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -33,8 +33,8 @@
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
- gpio-line-names = "SDA0",
- "SCL0",
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
"SDA1",
"SCL1",
"GPIO_GCLK",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 644d907bafbb..ba0167df6c5f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -25,8 +25,6 @@
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&wl_on>;
reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
};
@@ -40,8 +38,8 @@
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
- gpio-line-names = "GPIO0",
- "GPIO1",
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
"SDA1",
"SCL1",
"GPIO_GCLK",
@@ -98,11 +96,6 @@
"SD_DATA3_R";
pinctrl-0 = <&gpioout &alt0>;
-
- wl_on: wl-on {
- brcm,pins = <41>;
- brcm,function = <BCM2835_FSEL_GPIO_OUT>;
- };
};
&hdmi {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 00323ba8f7de..3b35a8a4a55f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -28,8 +28,8 @@
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
- gpio-line-names = "SDA0",
- "SCL0",
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
"SDA1",
"SCL1",
"GPIO_GCLK",
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 29f970f864dc..9d11cb759b5b 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,7 +1,7 @@
#include <dt-bindings/power/raspberrypi-power.h>
/ {
- memory {
+ memory@0 {
device_type = "memory";
reg = <0 0x10000000>;
};
@@ -19,8 +19,6 @@
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
- #address-cells = <0>;
- #size-cells = <0>;
mboxes = <&mailbox>;
};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index ac4408b34b58..7b4e651bafdd 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -9,7 +9,7 @@
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
model = "Raspberry Pi 2 Model B";
- memory {
+ memory@0 {
reg = <0 0x40000000>;
};
@@ -28,6 +28,72 @@
};
&gpio {
+ /*
+ * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+ * the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD0",
+ "RXD0",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "SDA0",
+ "SCL0",
+ "", /* GPIO30 */
+ "LAN_RUN",
+ "CAM_GPIO1",
+ "", /* GPIO33 */
+ "", /* GPIO34 */
+ "PWR_LOW_N",
+ "", /* GPIO36 */
+ "", /* GPIO37 */
+ "USB_LIMIT",
+ "", /* GPIO39 */
+ "PWM0_OUT",
+ "CAM_GPIO0",
+ "SMPS_SCL",
+ "SMPS_SDA",
+ "ETHCLK",
+ "PWM1_OUT",
+ "HDMI_HPD_N",
+ "STATUS_LED",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
/* I2S interface */
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 000000000000..7f4437a8eedb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model A+";
+
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory@0 {
+ reg = <0 0x20000000>;
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&firmware {
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "",
+ "BT_WL_ON",
+ "STATUS_LED_R",
+ "",
+ "",
+ "CAM_GPIO0",
+ "CAM_GPIO1",
+ "";
+ status = "okay";
+ };
+};
+
+&gpio {
+ /*
+ * This is mostly based on the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD1",
+ "RXD1",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "HDMI_HPD_N",
+ "STATUS_LED_G",
+ /* Used by BT module */
+ "CTS0",
+ "RTS0",
+ "TXD0",
+ "RXD0",
+ /* Used by Wifi */
+ "SD1_CLK",
+ "SD1_CMD",
+ "SD1_DATA0",
+ "SD1_DATA1",
+ "SD1_DATA2",
+ "SD1_DATA3",
+ "PWM0_OUT",
+ "PWM1_OUT",
+ "", /* GPIO42 */
+ "WIFI_CLK",
+ "SDA0",
+ "SCL0",
+ "SMPS_SCL",
+ "SMPS_SDA",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+ status = "okay";
+};
+
+/*
+ * SDHCI is used to control the SDIO for wireless
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
+&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <2000000>;
+ };
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 42bb09044cc7..c6fa34c24100 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -14,7 +14,7 @@
stdout-path = "serial1:115200n8";
};
- memory {
+ memory@0 {
reg = <0 0x40000000>;
};
@@ -42,7 +42,7 @@
#gpio-cells = <2>;
gpio-line-names = "BT_ON",
"WL_ON",
- "STATUS_LED",
+ "STATUS_LED_R",
"LAN_RUN",
"",
"CAM_GPIO0",
@@ -52,6 +52,76 @@
};
};
+&gpio {
+ /*
+ * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+ * the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD1",
+ "RXD1",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "HDMI_HPD_N",
+ "STATUS_LED_G",
+ /* Used by BT module */
+ "CTS0",
+ "RTS0",
+ "TXD0",
+ "RXD0",
+ /* Used by Wifi */
+ "SD1_CLK",
+ "SD1_CMD",
+ "SD1_DATA0",
+ "SD1_DATA1",
+ "SD1_DATA2",
+ "SD1_DATA3",
+ "PWM0_OUT",
+ "PWM1_OUT",
+ "ETHCLK",
+ "WIFI_CLK",
+ "SDA0",
+ "SCL0",
+ "SMPS_SCL",
+ "SMPS_SDA",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+};
+
&hdmi {
hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 0c155dd4f396..ce71f578c51a 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -14,7 +14,7 @@
stdout-path = "serial1:115200n8";
};
- memory {
+ memory@0 {
reg = <0 0x40000000>;
};
@@ -39,7 +39,7 @@
"WL_ON",
"STATUS_LED",
"LAN_RUN",
- "HPD_N",
+ "HDMI_HPD_N",
"CAM_GPIO0",
"CAM_GPIO1",
"PWR_LOW_N";
@@ -47,6 +47,76 @@
};
};
+&gpio {
+ /*
+ * Taken from rpi_SCH_3b_1p2_reduced.pdf and
+ * the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD1",
+ "RXD1",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "", /* GPIO 28 */
+ "LAN_RUN_BOOT",
+ /* Used by BT module */
+ "CTS0",
+ "RTS0",
+ "TXD0",
+ "RXD0",
+ /* Used by Wifi */
+ "SD1_CLK",
+ "SD1_CMD",
+ "SD1_DATA0",
+ "SD1_DATA1",
+ "SD1_DATA2",
+ "SD1_DATA3",
+ "PWM0_OUT",
+ "PWM1_OUT",
+ "ETHCLK",
+ "WIFI_CLK",
+ "SDA0",
+ "SCL0",
+ "SMPS_SCL",
+ "SMPS_SDA",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 4a89a1885a3d..81399b2c5af9 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -4,7 +4,7 @@
#include "bcm2836-rpi.dtsi"
/ {
- memory {
+ memory@0 {
reg = <0 0x40000000>;
};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index 76a2bab3bc6f..fe842f2f1ca7 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -20,6 +20,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 69e3570e03dd..6fcbb0509ba0 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -20,6 +20,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 0f6f0fe13bfb..b3e8cc90b13f 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -20,6 +20,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index f77089744996..fdeaa895512f 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -16,6 +16,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 4d427863756f..0d510cb15ec3 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 189cc3dcd6ef..962e89edba11 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -16,6 +16,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 03c1ab188576..658a56ff8a5c 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -20,6 +20,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 36efe410dcd7..5fd47eec4407 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 3e5e9972cd97..6604be6ff0a0 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index 7fd85475893d..567ebbd5a0e9 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -16,6 +16,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index 7acbecd42950..ac2d136ed334 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index f4558d9d2769..74371e821b1a 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index bdad7267255a..b44af63ee310 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 30719380b6c0..eebc0d43e220 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
new file mode 100644
index 000000000000..ec09c0426d16
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Phicomm K3";
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0000000 0x0080000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "nvram";
+ reg = <0x0080000 0x0100000>;
+ };
+
+ partition@180000{
+ label = "phicomm";
+ reg = <0x0180000 0x0280000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "firmware";
+ reg = <0x0400000 0x7C00000>;
+ compatible = "brcm,trx";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index 74c83b0ca54e..eb59508578e4 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
@@ -17,6 +16,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 214df18f3a75..4c71f5e95e00 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
@@ -17,6 +16,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index e15e2a1e9d8c..5ad53ea52d0a 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -16,6 +16,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index fd7af943fb0b..ac5266ee8d4c 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -13,9 +13,10 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&gic>;
chipcommonA {
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
index 431cda514230..2e7fda9b998c 100644
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
@@ -20,6 +20,7 @@
};
memory@0 {
+ device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x68000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index 5054fa9eb0d0..b29695bd4855 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -7,9 +7,10 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&gic>;
aliases {
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index f59764008b9c..e6a41e1b27fd 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -6,9 +6,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "brcm,bcm63138";
model = "Broadcom BCM63138 DSL SoC";
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index c859aa6f358c..504a63236a5e 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -1,8 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
/ {
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
index ef263412fea5..4991700ae6b0 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -18,6 +18,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 17f63c7a0437..250a1d6f2d05 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -40,6 +40,7 @@
compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
memory {
+ device_type = "memory";
reg = <0x00000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
index 11b0f5ed99e6..9140be7ec053 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -46,6 +46,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x10000000>;
};
};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index e798055d6989..52c4c6c9d3f1 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -44,6 +44,7 @@
};
memory {
+ device_type = "memory";
reg = <0x80000000 0x10000000>;
};
};
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index a5a23c376418..d2e8f36f8c60 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -44,9 +44,9 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "cnxt,cx92755";
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 3a2fa6e035a3..26f453dc8370 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -74,12 +74,16 @@
simple-audio-card,name = "DA850-OMAPL138 LCDK";
simple-audio-card,widgets =
"Line", "Line In",
- "Line", "Line Out";
+ "Line", "Line Out",
+ "Microphone", "Mic Jack";
simple-audio-card,routing =
"LINE1L", "Line In",
"LINE1R", "Line In",
"Line Out", "LLOUT",
- "Line Out", "RLOUT";
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&link0_codec>;
simple-audio-card,frame-master = <&link0_codec>;
@@ -250,6 +254,8 @@
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x18>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
status = "okay";
/* Regulators */
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 601c57afd4fe..95de9f214c14 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -222,6 +222,30 @@
#interrupt-cells = <2>;
};
+ gpio3: gpio@1ac000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio3";
+ ti,gpio-always-on;
+ reg = <0x1ac000 0x2000>;
+ interrupts = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@1ae000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ ti,gpio-always-on;
+ reg = <0x1ae000 0x2000>;
+ interrupts = <62>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
i2c2: i2c@2a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
@@ -240,10 +264,48 @@
ti,spi-num-cs = <4>;
ti,hwmods = "mcspi1";
dmas = <&edma 16 0 &edma 17 0
- &edma 18 0 &edma 19 0>;
+ &edma 18 0 &edma 19 0
+ &edma 20 0 &edma 21 0
+ &edma 22 0 &edma 23 0>;
+
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: spi@1a0000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <125>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi2";
+ dmas = <&edma 42 0 &edma 43 0
+ &edma 44 0 &edma 45 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
+ /* Board must configure dmas with edma_xbar for EDMA */
+ mcspi3: spi@1a2000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <126>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi3";
+ };
+
+ mcspi4: spi@1a4000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <127>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi4";
+ };
+
timer1: timer@2e000 {
compatible = "ti,dm814-timer";
reg = <0x2e000 0x2000>;
@@ -343,6 +405,12 @@
#size-cells = <1>;
ranges = <0 0 0x800>;
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,dm814-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <1>;
+ };
+
scm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
@@ -549,17 +617,14 @@
cpsw_emac0: slave@4a100200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
+
};
cpsw_emac1: slave@4a100300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
- };
-
- phy_sel: cpsw-phy-sel@48140650 {
- compatible = "ti,am3352-cpsw-phy-sel";
- reg= <0x48140650 0x4>;
- reg-names = "gmii-sel";
+ phys = <&phy_gmii_sel 2>;
};
};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 250ad0535e8c..2e8a3977219f 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "marvell,dove";
model = "Marvell Armada 88AP510 SoC";
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index bb45cb7fc3b6..414f1cd68733 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -77,18 +77,18 @@
};
};
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,dra7xx-phy-gmii-sel";
+ reg = <0x554 0x4>;
+ #phy-cells = <1>;
+ };
+
scm_conf_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
};
- phy_sel: cpsw-phy-sel@554 {
- compatible = "ti,dra7xx-cpsw-phy-sel";
- reg= <0x554 0x4>;
- reg-names = "gmii-sel";
- };
-
dra7_pmx_core: pinmux@1400 {
compatible = "ti,dra7-padconf",
"pinctrl-single";
@@ -3099,7 +3099,6 @@
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
ranges = <0 0 0x4000>;
syscon = <&scm_conf>;
- cpsw-phy-sel = <&phy_sel>;
status = "disabled";
davinci_mdio: mdio@1000 {
@@ -3114,11 +3113,13 @@
cpsw_emac0: slave@200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
};
cpsw_emac1: slave@300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
};
};
};
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi
index aaf1261d2ee4..0e74222a5eae 100644
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ b/arch/arm/boot/dts/ep7209.dtsi
@@ -6,11 +6,11 @@
/dts-v1/;
-#include "skeleton.dtsi"
-
#include <dt-bindings/clock/clps711x-clock.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Cirrus Logic EP7209";
compatible = "cirrus,ep7209";
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
index bc9d5b697452..3475c7777cbc 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/ep7211-edb7211.dts
@@ -12,6 +12,7 @@
compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
memory {
+ device_type = "memory";
reg = <0xc0000000 0x02000000>;
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 608d17454179..5892a9f7622f 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -168,6 +168,9 @@
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
+ clock-names = "clkout8";
+ clocks = <&cmu CLK_FIN_PLL>;
+ #clock-cells = <1>;
};
mipi_phy: video-phy {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 3a9eb1e91c45..08d3a0a7b4eb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -49,7 +49,7 @@
};
emmc_pwrseq: pwrseq {
- pinctrl-0 = <&sd1_cd>;
+ pinctrl-0 = <&emmc_rstn>;
pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -165,12 +165,6 @@
cpu0-supply = <&buck2_reg>;
};
-/* RSTN signal for eMMC */
-&sd1_cd {
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
&pinctrl_1 {
gpio_power_key: power_key {
samsung,pins = "gpx1-3";
@@ -188,6 +182,11 @@
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
+
+ emmc_rstn: emmc-rstn {
+ samsung,pins = "gpk1-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&ehci {
@@ -390,7 +389,6 @@
regulator-name = "LDO20_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-boot-on;
};
ldo21_reg: LDO21 {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 348556fcdd9d..a2251581f6b6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -53,7 +53,7 @@
regulator-name = "p3v3_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
+ gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 2ca9319f48f2..dc6fa6fe83f1 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -23,7 +23,7 @@
};
chosen {
- bootargs = "console=ttySAC2,115200";
+ stdout-path = "serial2:115200n8";
};
gpio_keys {
@@ -100,7 +100,7 @@
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index bf09eab90f8a..25d95de15c9b 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -36,6 +36,11 @@
};
};
+&adc {
+ vdd-supply = <&ldo4_reg>;
+ status = "okay";
+};
+
&bus_wcore {
devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
<&nocp_mem1_0>, <&nocp_mem1_1>;
@@ -468,7 +473,7 @@
buck8_reg: BUCK8 {
regulator-name = "vdd_1.8v_ldo";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
index e84544b220b9..51a843bd65ed 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -24,7 +24,9 @@
"Headphone Jack", "MICBIAS",
"IN1", "Headphone Jack",
"Speakers", "SPKL",
- "Speakers", "SPKR";
+ "Speakers", "SPKR",
+ "I2S Playback", "Mixer DAI TX",
+ "HiFi Playback", "Mixer DAI TX";
assigned-clocks = <&clock CLK_MOUT_EPLL>,
<&clock CLK_MOUT_MAU_EPLL>,
@@ -51,7 +53,7 @@
<196608000>;
cpu {
- sound-dai = <&i2s0 0>;
+ sound-dai = <&i2s0 0>, <&i2s0 1>;
};
codec {
sound-dai = <&hdmi>, <&max98090>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index b299e541cac0..5f195ad7e467 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -362,11 +362,6 @@
};
};
-&adc {
- vdd-supply = <&ldo4_reg>;
- status = "okay";
-};
-
&hdmi {
status = "okay";
ddc = <&i2c_2>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 0db935f2b836..c19b5a51ca44 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -18,6 +18,14 @@
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
};
+&arm_a7_pmu {
+ status = "disabled";
+};
+
+&arm_a15_pmu {
+ status = "disabled";
+};
+
&pwm {
/*
* PWM 0 -- fan
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 122174ea9e0a..892d389d6d09 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -33,6 +33,8 @@
compatible = "samsung,odroid-xu3-audio";
model = "Odroid-XU4";
+ samsung,audio-routing = "I2S Playback", "Mixer DAI TX";
+
assigned-clocks = <&clock CLK_MOUT_EPLL>,
<&clock CLK_MOUT_MAU_EPLL>,
<&clock CLK_MOUT_USER_MAU_EPLL>,
@@ -58,7 +60,7 @@
<196608000>;
cpu {
- sound-dai = <&i2s0 0>;
+ sound-dai = <&i2s0 0>, <&i2s0 1>;
};
codec {
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 26ff5d419bfc..3652f5556b29 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -40,7 +40,7 @@
spi2 = &cspi3;
};
- aitc: aitc-interrupt-controller@e0000000 {
+ aitc: aitc-interrupt-controller@10040000 {
compatible = "fsl,imx27-aitc", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
index 2967a748d859..a2eea58510dc 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -21,12 +21,28 @@
};
};
+&esdhc1 {
+ status = "okay";
+};
+
&owire {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_owire>;
status = "okay";
};
+&pmic {
+ fsl,mc13xxx-uses-rtc;
+
+ regulators {
+ vcoincell_reg: vcoincell {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 82d8df097ef1..d90ba5fe4f1b 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -37,7 +37,6 @@
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
- fsl,mc13xxx-uses-rtc;
regulators {
sw1_reg: sw1 {
@@ -142,16 +141,17 @@
pwgt2spi_reg: pwgt2spi {
regulator-always-on;
};
-
- vcoincell_reg: vcoincell {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
};
};
};
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ max-frequency = <50000000>;
+ bus-width = <1>;
+};
+
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
@@ -174,9 +174,12 @@
};
&i2c2 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
clock-frequency = <400000>;
+ scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
status = "okay";
mma7455l@1d {
@@ -241,6 +244,14 @@
>;
};
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CLK__SD1_CLK 0x400021d5
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x400020d5
+ >;
+ };
+
pinctrl_esdhc2: esdhc2grp {
fsl,pins = <
MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
@@ -282,6 +293,13 @@
>;
};
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_2__GPIO1_2 0x400001ed
+ MX51_PAD_GPIO1_3__GPIO1_3 0x400001ed
+ >;
+ };
+
pinctrl_nfc: nfcgrp {
fsl,pins = <
MX51_PAD_NANDF_D0__NANDF_D0 0x80000000
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
new file mode 100644
index 000000000000..fb01fa6e4224
--- /dev/null
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/ {
+ keyboard {
+ compatible = "gpio-keys";
+
+ btn0 {
+ gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
+ label = "btn0";
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+
+ btn1 {
+ gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
+ label = "btn1";
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+
+ btn2 {
+ gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
+ label = "btn2";
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+
+ btn3 {
+ gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
+ label = "btn3";
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ gen-led0 {
+ label = "led0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led0>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ };
+
+ gen-led1 {
+ label = "led1";
+ gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ gen-led2 {
+ label = "led2";
+ gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ gen-led3 {
+ label = "led3";
+ gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ reg_usb_otg_vbus: regulator-otg-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_otg>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_3v3: regulator-3v3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_3v3>;
+ compatible = "regulator-fixed";
+ regulator-name = "reg_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_enet: regulator-ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_enet>;
+ compatible = "regulator-fixed";
+ regulator-name = "ethernet-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&sw4_reg>;
+ };
+
+ reg_audio: regulator-audio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_audio>;
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_aud";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&reg_3v3>;
+ };
+
+ reg_hdmi: regulator-hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_hdmi>;
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&reg_3v3>;
+ };
+
+ reg_uart3: regulator-uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_uart3>;
+ compatible = "regulator-fixed";
+ regulator-name = "uart3-supply";
+ gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&reg_3v3>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_1v8>;
+ compatible = "regulator-fixed";
+ regulator-name = "1v8-supply";
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&reg_3v3>;
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_pcie>;
+ regulator-name = "mpcie_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_mipi: regulator-mipi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_mipi>;
+ regulator-name = "mipi_pwr_en";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&wm8962>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "disabled";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-duration = <10>;
+ phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ phy-supply = <&reg_enet>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ wm8962: audio-codec@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ clock-names = "xclk";
+ DCVDD-supply = <&reg_audio>;
+ DBVDD-supply = <&reg_audio>;
+ AVDD-supply = <&reg_audio>;
+ CPVDD-supply = <&reg_audio>;
+ MICVDD-supply = <&reg_audio>;
+ PLLVDD-supply = <&reg_audio>;
+ SPKVDD1-supply = <&reg_audio>;
+ SPKVDD2-supply = <&reg_audio>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0013 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x8014 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+};
+
+&i2c3 {
+ ov5640: camera@10 {
+ compatible = "ovti,ov5640";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+ reg = <0x10>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ clock-names = "xclk";
+ DOVDD-supply = <&reg_mipi>;
+ AVDD-supply = <&reg_mipi>;
+ DVDD-supply = <&reg_mipi>;
+ reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+
+ port {
+ ov5640_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+ pcf8575: gpio@20 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcf8574>;
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ lines-initial-states = <0x0710>;
+ wakeup-source;
+ };
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+};
+
+&mipi_csi {
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi2_in: endpoint {
+ remote-endpoint = <&ov5640_to_mipi_csi2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <&reg_pcie>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ vmmc-supply = <&reg_3v3>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* ENET_INT */
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1b0b0 /* ETHR_nRST */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led0: led0grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_ov5640: ov5640grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b1
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b1
+ >;
+ };
+
+ pinctrl_pcf8574: pcf8575grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_1v8: reg1v8grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_3v3: reg3v3grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_audio: reg-audiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_enet: reg-enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_hdmi: reg-hdmigrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_mipi: reg-mipigrp {
+ fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
+ };
+
+ pinctrl_reg_pcie: reg-pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_uart3: reguart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_usb_h1_vbus: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_usb_otg: reg-usb-otggrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0xd17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17069
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17069
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17069
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17069
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17069
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+
+};
diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
new file mode 100644
index 000000000000..7ceae3573248
--- /dev/null
+++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x80000000>;
+ };
+
+ reg_wl18xx_vmmc: regulator-wl18xx {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1837";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vddcore";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vddsoc";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "gen_3v3";
+ regulator-boot-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "sw3a_vddr";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "sw3b_vddr";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "gen_rgmii";
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-name = "gen_5v0";
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "gen_vsns";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "gen_1v5";
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-name = "vgen2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-name = "gen_vadj_0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-name = "gen_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-name = "gen_vadj_1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-name = "gen_2v5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ coin_reg: coin {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp102";
+ reg = <0x49>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp102";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tempsense>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ read-only; /* Manufacturing EEPROM programmed at factory */
+ reg = <0x51>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&reg_arm
+{
+ vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+ vin-supply = <&sw1c_reg>;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_gpmi_nand: gpmi-nandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = < /* Enable ARM Debugger */
+ MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_tempsense: tempsensegrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */
+ >;
+ };
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ non-removable;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <&sw2_reg>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <&reg_wl18xx_vmmc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index d5f7a1703aae..9a5d6c94cca4 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -228,10 +228,11 @@
&weim {
status = "okay";
- /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */
+ /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
ranges = <0 0 0x08000000 0x02000000
1 0 0x0a000000 0x02000000
- 2 0 0x0c000000 0x02000000>;
+ 2 0 0x0c000000 0x02000000
+ 3 0 0x0e000000 0x02000000>;
/* SRAM on Colibri nEXT_CS0 */
sram@0,0 {
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
new file mode 100644
index 000000000000..b715ab0fa1ff
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 32 64 128 255>;
+ default-brightness-level = <32>;
+ num-interpolated-steps = <8>;
+ power-supply = <&sw2_reg>;
+ status = "disabled";
+ };
+
+ lcd_display: display {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel: panel {
+ compatible = "dataimage,scf0700c48ggu18";
+ power-supply = <&sw2_reg>;
+ status = "disabled";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ status = "disabled";
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ status = "disabled";
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ status = "okay";
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <20>;
+ phy-supply = <&sw2_reg>;
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port2: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port3: phy@2 {
+ reg = <2>;
+ };
+
+ switch@0 {
+ compatible = "qca,qca8334";
+ reg = <0>;
+
+ switch_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: port@0 {
+ reg = <0>;
+ label = "cpu";
+ phy-mode = "rgmii";
+ ethernet = <&fec>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth2";
+ phy-handle = <&phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth1";
+ phy-handle = <&phy_port3>;
+ };
+ };
+ };
+ };
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_cec>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "fsl,pfuze200";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ reg = <0x8>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vsnvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ leds: led-controller@30 {
+ compatible = "ti,lp5562";
+ reg = <0x30>;
+ clock-mode = /bits/ 8 <1>;
+ status = "disabled";
+
+ chan0 {
+ chan-name = "R";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan1 {
+ chan-name = "G";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan2 {
+ chan-name = "B";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan3 {
+ chan-name = "W";
+ led-cur = /bits/ 8 <0x0>;
+ max-cur = /bits/ 8 <0x0>;
+ };
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c128";
+ reg = <0x57>;
+ pagesize = <64>;
+ status = "okay";
+ };
+
+ touchscreen: touchscreen@5c {
+ compatible = "pixcir,pixcir_tangoc";
+ reg = <0x5c>;
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ status = "disabled";
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "disabled";
+
+ oled: oled@3d {
+ compatible = "solomon,ssd1305fb-i2c";
+ reg = <0x3d>;
+ solomon,height = <64>;
+ solomon,width = <128>;
+ solomon,page-offset = <0>;
+ solomon,prechargep2 = <15>;
+ reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+ vbat-supply = <&sw2_reg>;
+ status = "disabled";
+ };
+
+ gpio_oled: gpio@41 {
+ compatible = "nxp,pca9536";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x41>;
+ vcc-supply = <&sw2_reg>;
+ status = "disabled";
+ };
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098
+ >;
+ };
+
+ pinctrl_hdmi_cec: hdmicecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+ >;
+ };
+
+ pinctrl_ipu1: ipu1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098
+ >;
+ };
+
+ pinctrl_pcie_reg: pciereggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8
+ >;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1-vbus {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098
+ >;
+ };
+
+ pinctrl_usbotg_vbus: usbotg-vbus {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0
+ >;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <&reg_pcie>;
+ status = "disabled";
+};
+
+&pwm1 {
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ vbus-supply = <&reg_usb_h1_vbus>;
+ status = "disabled";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ vbus-supply = <&reg_usb_otg_vbus>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-d-cal = <106>;
+ status = "okay";
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <109>;
+ status = "disabled";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <&sw2_reg>;
+ status = "disabled";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ vmmc-supply = <&sw2_reg>;
+ status = "okay";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
+&wdog2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
new file mode 100644
index 000000000000..a38c407fd837
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+ model = "Y Soft IOTA Draco i.MX6Solo board";
+ compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcd_display {
+ status = "okay";
+};
+
+&leds {
+ status = "okay";
+};
+
+&panel {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&reg_usb_h1_vbus {
+ status = "okay";
+};
+
+&touchscreen {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbphy2 {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
new file mode 100644
index 000000000000..f97927064750
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+ model = "Y Soft IOTA Hydra i.MX6DualLite board";
+ compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&gpio_oled {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&leds {
+ status = "okay";
+};
+
+&oled {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&reg_pcie {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
new file mode 100644
index 000000000000..0d594e4bd559
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+ model = "Y Soft IOTA Ursa i.MX6Solo board";
+ compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcd_display {
+ status = "okay";
+};
+
+&panel {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&reg_usb_h1_vbus {
+ status = "okay";
+};
+
+&switch_ports {
+ /delete-node/ port@2;
+};
+
+&touchscreen {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbphy2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
new file mode 100644
index 000000000000..45eb0b7f75f8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6-logicpd-som.dtsi"
+#include "imx6-logicpd-baseboard.dtsi"
+
+/ {
+ model = "Logic PD i.MX6QD SOM-M3";
+ compatible = "fsl,imx6q";
+
+ backlight: backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 20000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <&reg_lcd>;
+ };
+
+ panel-lvds0 {
+ compatible = "okaya,rs800480t-7x0gp";
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_lcd: regulator-lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_reg>;
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_panel_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&reg_3v3>;
+ startup-delay-us = <500000>;
+ };
+
+ reg_lcd_reset: regulator-lcd-reset {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_reset>;
+ compatible = "regulator-fixed";
+ regulator-name = "nLCD_RESET";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&reg_lcd>;
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&reg_hdmi {
+ regulator-always-on; /* Without this, the level shifter on HDMI doesn't turn on */
+};
+
+&iomuxc {
+ pinctrl_lcd_reg: lcdreg {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */
+ >;
+ };
+
+ pinctrl_lcd_reset: lcdreset {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */
+ >;
+ };
+
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 279b15e9ae2e..2ce8399a10ba 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -1,49 +1,6 @@
-/*
- * Copyright 2014 Soeren Moch <smoch@web.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2014 Soeren Moch <smoch@web.de>
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 8380f1b26826..7c4ad541c3f5 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -332,11 +332,17 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -346,17 +352,17 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* forbid to use ADC channels 3-0 (touch) */
+ st,norequest-mask = <0x0F>;
+ };
};
};
@@ -369,8 +375,8 @@
pinctrl-names = "default", "recovery";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_recovery>;
- scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 87e15e7cb32b..1beac22266ed 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -262,11 +262,17 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -276,17 +282,17 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* forbid to use ADC channels 3-0 (touch) */
+ st,norequest-mask = <0x0F>;
+ };
};
};
@@ -298,8 +304,8 @@
pinctrl-names = "default", "recovery";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_recovery>;
- scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1b50b01e9bac..433bf09a1954 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -89,10 +89,23 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
+ phy-handle = <&ethphy>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
+
+ fec_mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ txc-skew-ps = <1680>;
+ rxc-skew-ps = <1860>;
+ };
+ };
};
&gpmi {
@@ -117,6 +130,7 @@
reg = <0x58>;
interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+ interrupt-controller;
regulators {
vddcore_reg: bcore1 {
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 8930aec6464c..a0705066ccba 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -64,7 +64,6 @@
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-always-on;
};
gpio-keys {
@@ -250,6 +249,8 @@
pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
interrupt-parent = <&gpio1>;
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&reg_sensors>;
+ vddio-supply = <&reg_sensors>;
};
ov5642: camera@3c {
@@ -440,6 +441,8 @@
pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
interrupt-parent = <&gpio3>;
interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&reg_sensors>;
+ vddio-supply = <&reg_sensors>;
};
light-sensor@44 {
@@ -449,6 +452,7 @@
pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
interrupt-parent = <&gpio3>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&reg_sensors>;
};
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index e7524e73efb4..4b4813f176cd 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -338,7 +338,7 @@
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM1>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM1>;
clock-names = "ipg", "per";
};
@@ -348,7 +348,7 @@
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM2>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM2>;
clock-names = "ipg", "per";
};
@@ -358,7 +358,7 @@
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM3>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM3>;
clock-names = "ipg", "per";
};
@@ -368,7 +368,7 @@
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM4>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM4>;
clock-names = "ipg", "per";
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index d1375d3650fd..5b16e65f7696 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -785,6 +785,18 @@
clocks = <&clks IMX6SX_CLK_GPU>;
};
+ pd_disp: power-domain@2 {
+ reg = <2>;
+ #power-domain-cells = <0>;
+ clocks = <&clks IMX6SX_CLK_PXP_AXI>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>,
+ <&clks IMX6SX_CLK_LCDIF1_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_LCDIF2_PIX>,
+ <&clks IMX6SX_CLK_CSI>,
+ <&clks IMX6SX_CLK_VADC>;
+ };
+
pd_pci: power-domain@3 {
reg = <3>;
#power-domain-cells = <0>;
@@ -1205,6 +1217,7 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PXP_AXI>;
clock-names = "axi";
+ power-domains = <&pd_disp>;
status = "disabled";
};
@@ -1226,6 +1239,7 @@
<&clks IMX6SX_CLK_LCDIF_APB>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pix", "axi", "disp_axi";
+ power-domains = <&pd_disp>;
status = "disabled";
};
@@ -1237,6 +1251,7 @@
<&clks IMX6SX_CLK_LCDIF_APB>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pix", "axi", "disp_axi";
+ power-domains = <&pd_disp>;
status = "disabled";
};
@@ -1246,6 +1261,7 @@
clocks = <&clks IMX6SX_CLK_VADC>,
<&clks IMX6SX_CLK_CSI>;
clock-names = "vadc", "csi";
+ power-domains = <&pd_disp>;
status = "disabled";
};
};
@@ -1370,7 +1386,8 @@
<&clks IMX6SX_CLK_PCIE_REF_125M>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi";
- power-domains = <&pd_pci>;
+ power-domains = <&pd_disp>, <&pd_pci>;
+ power-domain-names = "pcie", "pcie_phy";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
new file mode 100644
index 000000000000..fc2997449b49
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ul.dtsi"
+
+/ {
+ model = "Phytec phyCORE i.MX6 UltraLite";
+ compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ /*
+ * Set the minimum memory size here and
+ * let the bootloader set the real size.
+ */
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>;
+ };
+
+ gpio_leds_som: leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioleds_som>;
+ compatible = "gpio-leds";
+
+ led_green {
+ label = "phycore:green";
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ eeprom@52 {
+ compatible = "catalyst,24c32", "atmel,24c32";
+ reg = <0x52>;
+ };
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059
+ >;
+ };
+
+ pinctrl_gpioleds_som: gpioledssomgrp {
+ fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0>;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2cgrp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi
new file mode 100644
index 000000000000..e2f38f39a6ad
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ gpio_keys: gpio-keys {
+ compatible = "gpio-key";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+ status = "disabled";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ user_leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_user_leds>;
+ status = "disabled";
+
+ led_yellow {
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led_red {
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79
+ >;
+ };
+
+ pinctrl_user_leds: user_ledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x79
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
new file mode 100644
index 000000000000..b6a1407a9d44
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ul-phytec-pcl063.dtsi"
+#include "imx6ul-phytec-phyboard-segin.dtsi"
+#include "imx6ul-phytec-peb-eval-01.dtsi"
+
+/ {
+ model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured";
+ compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&tlv320 {
+ status = "okay";
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&reg_can1_en {
+ status = "okay";
+};
+
+&reg_sound_1v8 {
+ status = "okay";
+};
+
+&reg_sound_3v3 {
+ status = "okay";
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&sound {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0
+ MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0
+ MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0
+ MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi
new file mode 100644
index 000000000000..7bf439a77d2c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+ model = "Phytec phyBOARD-Segin i.MX6 UltraLite";
+ compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+ aliases {
+ rtc0 = &i2c_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ reg_sound_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "i2s-audio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ status = "disabled";
+ };
+
+ reg_sound_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "i2s-audio-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ status = "disabled";
+ };
+
+ reg_can1_en: regulator-can1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&princtrl_flexcan1_en>;
+ regulator-name = "Can";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ status = "disabled";
+ };
+
+ reg_adc1_vref_3v3: regulator-vref-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "Speaker", "SPOP",
+ "Speaker", "SPOM",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ status = "disabled";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&tlv320>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ };
+ };
+
+};
+
+&adc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc1>;
+ vref-supply = <&reg_adc1_vref_3v3>;
+ /*
+ * driver can not separate a specific channel so we request 4 channels
+ * here - we need only the fourth channel
+ */
+ num-channels = <4>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <&reg_can1_en>;
+ status = "disabled";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <786432000>;
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy1>;
+ status = "disabled";
+};
+
+&i2c1 {
+ tlv320: codec@18 {
+ compatible = "ti,tlv320aic3007";
+ #sound-dai-cells = <0>;
+ reg = <0x18>;
+ AVDD-supply = <&reg_sound_3v3>;
+ IOVDD-supply = <&reg_sound_3v3>;
+ DRVDD-supply = <&reg_sound_3v3>;
+ DVDD-supply = <&reg_sound_1v8>;
+ status = "disabled";
+ };
+
+ stmpe: touchscreen@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe>;
+ status = "disabled";
+
+ touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ touchscreen-inverted-x = <1>;
+ touchscreen-inverted-y = <1>;
+ };
+ };
+
+ i2c_rtc: rtc@68 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc_int>;
+ compatible = "microcrystal,rv4162";
+ reg = <0x68>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ status = "disabled";
+ };
+};
+
+&mdio {
+ ethphy1: ethernet-phy@2 {
+ reg = <2>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "disabled";
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+ <&clks IMX6UL_CLK_SAI2>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <19200000>;
+ fsl,sai-mclk-direction-output;
+ status = "disabled";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ dr_mode = "otg";
+ status = "disabled";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "disabled";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_adc1: adc1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1 {
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
+ >;
+ };
+
+ princtrl_flexcan1_en: flexcan1engrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
+ >;
+ };
+
+ pinctrl_rtc_int: rtcintgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
+ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
+ MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
+ MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 6c63a7384611..9ad1da159768 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -94,16 +94,16 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
- scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
- sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
- scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
ad7879@2c {
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index f3668fe69eac..22e4a307fa59 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -30,6 +30,18 @@
>;
};
+&ocotp {
+ compatible = "fsl,imx6ull-ocotp", "syscon";
+};
+
+&usdhc1 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
+&usdhc2 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
/ {
soc {
aips3: aips-bus@2200000 {
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 931b2754b099..fca6e50f37c8 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -199,9 +199,13 @@
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
};
- smc1: smc1@40410000 {
+ smc1: clock-controller@40410000 {
compatible = "fsl,imx7ulp-smc1";
reg = <0x40410000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>,
+ <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>;
+ clock-names = "divcore", "hsrun_divcore";
};
pcc3: clock-controller@40b30000 {
@@ -343,4 +347,17 @@
gpio-ranges = <&iomuxc1 0 96 32>;
};
};
+
+ m4aips1: bus@41080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x41080000 0x80000>;
+ ranges;
+
+ sim: sim@410a3000 {
+ compatible = "fsl,imx7ulp-sim", "syscon";
+ reg = <0x410a3000 0x1000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 4d58638d104b..1612a869a4f7 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -3,9 +3,15 @@
* SoC core Device Tree for the ARM Integrator platforms
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
core-module@10000000 {
compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index a185ab8759fa..01fa229e1bd0 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -192,6 +192,43 @@
interrupts = <27>;
};
+ bridge {
+ compatible = "ti,ths8134a", "ti,ths8134";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&clcd_pads_vga_dac>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
+
fpga {
/*
* These PrimeCells are at the same location and using
@@ -254,39 +291,27 @@
interrupts = <22>;
clocks = <&auxosc>, <&pclk>;
clock-names = "clcdclk", "apb_pclk";
+ /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+ max-memory-bandwidth = <40000000>;
- port {
- /*
- * The VGA connected is implemented with a
- * THS8134A triple DAC that can be run in 24bit
- * or 16bit RGB mode.
- */
- clcd_pads: endpoint {
- remote-endpoint = <&clcd_panel>;
- arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
- };
- };
-
- panel {
- compatible = "panel-dpi";
-
- port {
- clcd_panel: endpoint {
- remote-endpoint = <&clcd_pads>;
- };
- };
-
- /* Standard 640x480 VGA timings */
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <48>;
- hfront-porch = <16>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <33>;
- vfront-porch = <10>;
- vsync-len = <2>;
+ /*
+ * This port is routed through a PLD (Programmable
+ * Logic Device) that routes the output from the CLCD
+ * (after transformations) to the VGA DAC and also an
+ * external panel connector. The PLD is essential for
+ * supporting RGB565/BGR565.
+ *
+ * The signals from the port thus reaches two endpoints.
+ * The PLD is managed through a few special bits in the
+ * FPGA "sysreg".
+ *
+ * This arrangement can be clearly seen in
+ * ARM DUI 0225D, page 3-41, figure 3-19.
+ */
+ port@0 {
+ clcd_pads_vga_dac: endpoint {
+ remote-endpoint = <&vga_bridge_in>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index 31ceacd841de..b3ad3f607d31 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -190,53 +190,6 @@
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
-
- dsa {
- status = "disabled";
-
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- dsa,ethernet = <&eth0port>;
- dsa,mii-bus = <&mdio>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0>; /* MDIO address 0, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "lan4";
- };
-
- port@1 {
- reg = <1>;
- label = "lan3";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan1";
- };
-
- port@4 {
- reg = <4>;
- label = "wan";
- };
-
- port@6 {
- reg = <6>;
- label = "cpu";
- };
- };
- };
};
&mdio {
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index a7d659b7145a..2f9660f3b457 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -66,53 +66,6 @@
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
};
-
- dsa {
- status = "disabled";
-
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- dsa,ethernet = <&eth0port>;
- dsa,mii-bus = <&mdio>;
-
- switch@16,0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <16 0>; /* MDIO address 16, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "ethernet1";
- };
-
- port@1 {
- reg = <1>;
- label = "ethernet2";
- };
-
- port@2 {
- reg = <2>;
- label = "ethernet3";
- };
-
- port@3 {
- reg = <3>;
- label = "ethernet4";
- };
-
- port@4 {
- reg = <4>;
- label = "internet";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
- };
- };
};
&pinctrl {
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 86d532916d56..2e1a75348908 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -107,53 +107,6 @@
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
-
- dsa {
- status = "disabled";
-
- compatible = "marvell,dsa";
- #address-cells = <1>;
- #size-cells = <0>;
-
- dsa,ethernet = <&eth0port>;
- dsa,mii-bus = <&mdio>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0>; /* MDIO address 0, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "lan1";
- };
-
- port@1 {
- reg = <1>;
- label = "lan2";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- };
-
- port@3 {
- reg = <3>;
- label = "lan4";
- };
-
- port@4 {
- reg = <4>;
- label = "wan";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
- };
- };
};
&mdio {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index a9fee2c2bcaf..9d88301daf0e 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -16,15 +16,6 @@
model = "Marvell RD88f6281 Reference design, with Z0 SoC";
compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
- dsa {
- switch@0 {
- reg = <0 0>; /* MDIO address 0, switch 0 in tree */
- port@4 {
- reg = <4>;
- label = "wan";
- };
- };
- };
};
&eth1 {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index 0f22f0e6f56b..f1f8eee132e8 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -48,47 +48,6 @@
cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
/* No WP GPIO */
};
- };
-
- dsa {
- status = "disabled";
-
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- dsa,ethernet = <&eth0port>;
- dsa,mii-bus = <&mdio>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan1";
- };
-
- port@1 {
- reg = <1>;
- label = "lan2";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- };
-
- port@3 {
- reg = <3>;
- label = "lan4";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
- };
};
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 81c7eda2c442..2161e23bd98e 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,11 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-/include/ "skeleton.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "marvell,kirkwood";
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
index 58ea0a4e7afa..f46a11827ef6 100644
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -17,64 +17,70 @@
/ {
model = "Embedded Artists LPC3250 board based on NXP LPC3250";
compatible = "ea,ea3250", "nxp,lpc3250";
- #address-cells = <1>;
- #size-cells = <1>;
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x4000000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@21 {
+
+ button {
label = "Interrupt Key";
linux,code = <103>;
gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
};
+
key1 {
label = "KEY1";
linux,code = <1>;
gpios = <&pca9532 0 0>;
};
+
key2 {
label = "KEY2";
linux,code = <2>;
gpios = <&pca9532 1 0>;
};
+
key3 {
label = "KEY3";
linux,code = <3>;
gpios = <&pca9532 2 0>;
};
+
key4 {
label = "KEY4";
linux,code = <4>;
gpios = <&pca9532 3 0>;
};
+
joy0 {
label = "Joystick Key 0";
linux,code = <10>;
gpios = <&gpio 2 0 0>; /* P2.0 */
};
+
joy1 {
label = "Joystick Key 1";
linux,code = <11>;
gpios = <&gpio 2 1 0>; /* P2.1 */
};
+
joy2 {
label = "Joystick Key 2";
linux,code = <12>;
gpios = <&gpio 2 2 0>; /* P2.2 */
};
+
joy3 {
label = "Joystick Key 3";
linux,code = <13>;
gpios = <&gpio 2 3 0>; /* P2.3 */
};
+
joy4 {
label = "Joystick Key 4";
linux,code = <14>;
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
index 1e1c2f517a82..ebd19258e22b 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -1,6 +1,7 @@
/*
* PHYTEC phyCORE-LPC3250 board
*
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
* Copyright 2012 Roland Stigge <stigge@antcom.de>
*
* The code contained herein is licensed under the GNU General Public
@@ -17,45 +18,12 @@
/ {
model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
compatible = "phytec,phy3250", "nxp,lpc3250";
- #address-cells = <1>;
- #size-cells = <1>;
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x4000000>;
};
- regulators {
- backlight_reg: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "backlight_reg";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio 5 4 0>;
- enable-active-high;
- regulator-boot-on;
- };
-
- lcd_reg: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "lcd_reg";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio 5 0 0>;
- enable-active-high;
- regulator-boot-on;
- };
-
- sd_reg: regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "sd_reg";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio 5 5 0>;
- enable-active-high;
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -69,10 +37,59 @@
linux,default-trigger = "heartbeat";
};
};
+
+ panel: panel {
+ compatible = "sharp,lq035q7db03";
+ power-supply = <&reg_lcd>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&cldc_output>;
+ };
+ };
+ };
+
+ reg_backlight: regulator-backlight {
+ compatible = "regulator-fixed";
+ regulator-name = "backlight";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio 5 4 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio 5 0 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_sd: regulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 5 5 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
};
&clcd {
+ max-memory-bandwidth = <18710000>;
status = "okay";
+
+ port {
+ cldc_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
};
&i2c1 {
@@ -130,7 +147,7 @@
cd-gpios = <&gpio 3 1 0>;
cd-inverted;
bus-width = <4>;
- vmmc-supply = <&sd_reg>;
+ vmmc-supply = <&reg_sd>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index b7303a4e4236..20b38f4ade37 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -11,12 +11,12 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include "skeleton.dtsi"
-
#include <dt-bindings/clock/lpc32xx-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "nxp,lpc3220";
interrupt-parent = <&mic>;
@@ -139,11 +139,11 @@
};
clcd: clcd@31040000 {
- compatible = "arm,pl110", "arm,primecell";
+ compatible = "arm,pl111", "arm,primecell";
reg = <0x31040000 0x1000>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk LPC32XX_CLK_LCD>;
- clock-names = "apb_pclk";
+ clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+ clock-names = "clcdclk", "apb_pclk";
status = "disabled";
};
@@ -230,7 +230,7 @@
status = "disabled";
};
- i2s1: i2s@2009C000 {
+ i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009C000 0x1000>;
};
@@ -273,7 +273,7 @@
status = "disabled";
};
- i2c1: i2c@400A0000 {
+ i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A0000 0x100>;
interrupt-parent = <&sic1>;
@@ -284,7 +284,7 @@
clocks = <&clk LPC32XX_CLK_I2C1>;
};
- i2c2: i2c@400A8000 {
+ i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A8000 0x100>;
interrupt-parent = <&sic1>;
@@ -295,7 +295,7 @@
clocks = <&clk LPC32XX_CLK_I2C2>;
};
- mpwm: mpwm@400E8000 {
+ mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400E8000 0x78>;
status = "disabled";
@@ -394,7 +394,7 @@
#gpio-cells = <3>; /* bank, pin, flags */
};
- timer4: timer@4002C000 {
+ timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4002C000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -412,7 +412,7 @@
status = "disabled";
};
- watchdog: watchdog@4003C000 {
+ watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
@@ -451,7 +451,7 @@
status = "disabled";
};
- timer1: timer@4004C000 {
+ timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4004C000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@@ -462,7 +462,9 @@
key: key@40050000 {
compatible = "nxp,lpc3220-key";
reg = <0x40050000 0x1000>;
- interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_KEY>;
+ interrupt-parent = <&sic1>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -475,7 +477,7 @@
status = "disabled";
};
- pwm1: pwm@4005C000 {
+ pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
@@ -484,7 +486,7 @@
status = "disabled";
};
- pwm2: pwm@4005C004 {
+ pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 8b973f537d3a..93d0c2e99e7c 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -40,8 +40,6 @@
pca_buttons {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
autorepeat;
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 02b23fa29d75..224f80a4a31d 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -57,8 +57,6 @@
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&gpio_joystick_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
autorepeat;
diff --git a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
new file mode 100644
index 000000000000..1f84654df50c
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
+ *
+ * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "MYIR Tech LPC4357 Development Board";
+ compatible = "myir,myd-lpc4357", "nxp,lpc4357";
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory@28000000 {
+ device_type = "memory";
+ reg = <0x28000000 0x2000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led5 {
+ gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led6 {
+ gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ panel: panel {
+ compatible = "innolux,at070tn92";
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&lcdc_output>;
+ };
+ };
+ };
+
+ vcc: vcc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vmmc: vmmc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&pinctrl {
+ can0_pins: can0-pins {
+ can_rd_cfg {
+ pins = "p3_1";
+ function = "can0";
+ input-enable;
+ };
+
+ can_td_cfg {
+ pins = "p3_2";
+ function = "can0";
+ };
+ };
+
+ can1_pins: can1-pins {
+ can_rd_cfg {
+ pins = "pe_1";
+ function = "can1";
+ input-enable;
+ };
+
+ can_td_cfg {
+ pins = "pe_0";
+ function = "can1";
+ };
+ };
+
+ emc_pins: emc-pins {
+ emc_addr0_22_cfg {
+ pins = "p2_9", "p2_10", "p2_11", "p2_12",
+ "p2_13", "p1_0", "p1_1", "p1_2",
+ "p2_8", "p2_7", "p2_6", "p2_2",
+ "p2_1", "p2_0", "p6_8", "p6_7",
+ "pd_16", "pd_15", "pe_0", "pe_1",
+ "pe_2", "pe_3", "pe_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_data0_15_cfg {
+ pins = "p1_7", "p1_8", "p1_9", "p1_10",
+ "p1_11", "p1_12", "p1_13", "p1_14",
+ "p5_4", "p5_5", "p5_6", "p5_7",
+ "p5_0", "p5_1", "p5_2", "p5_3";
+ function = "emc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_we_oe_cfg {
+ pins = "p1_6", "p1_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_cs0_cfg {
+ pins = "p1_5";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_dqm0_1_cfg {
+ pins = "p6_12", "p6_10";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_ras_cas_cfg {
+ pins = "p6_5", "p6_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_dycs0_cfg {
+ pins = "p6_9";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_cke_cfg {
+ pins = "p6_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_clock_cfg {
+ pins = "clk0";
+ function = "emc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+ };
+
+ enet_rmii_pins: enet-rmii-pins {
+ enet_rmii_rxd_cfg {
+ pins = "p1_15", "p0_0";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_txd_cfg {
+ pins = "p1_18", "p1_20";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_rx_dv_cfg {
+ pins = "p1_16";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ enet_mdc_cfg {
+ pins = "pc_1";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_tx_en_cfg {
+ pins = "p0_1";
+ function = "enet";
+ bias-disable;
+ };
+
+ enet_ref_clk_cfg {
+ pins = "p1_19";
+ function = "enet";
+ slew-rate = <1>;
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ i2c1_pins_cfg {
+ pins = "pe_15", "pe_13";
+ function = "i2c1";
+ input-enable;
+ };
+ };
+
+ lcd_pins: lcd-pins {
+ lcd_vd0_23_cfg {
+ pins = "p4_1", "p4_4", "p4_3", "p4_2",
+ "p8_7", "p8_6", "p8_5", "p8_4",
+ "p7_5", "p4_8", "p4_10", "p4_9",
+ "p8_3", "pb_6", "pb_5", "pb_4",
+ "p7_4", "p7_3", "p7_2", "p7_1",
+ "pb_3", "pb_2", "pb_1", "pb_0";
+ function = "lcd";
+ };
+
+ lcd_vsync_en_dclk_lp_pwr_cfg {
+ pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
+ function = "lcd";
+ };
+ };
+
+ led_pins: led-pins {
+ led_1_6_cfg {
+ pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ sdmmc_pins: sdmmc-pins {
+ sdmmc_clk_cfg {
+ pins = "pc_0";
+ function = "sdmmc";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ sdmmc_cmd_dat0_3_cfg {
+ pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+ function = "sdmmc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ sdmmc_cd_cfg {
+ pins = "pc_8";
+ function = "sdmmc";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_sck_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ spifi_mosi_miso_sio2_sio3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ bias-disable;
+ };
+ };
+
+ ssp1_pins: ssp1-pins {
+ ssp1_sck_cfg {
+ pins = "pf_4";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_miso_cfg {
+ pins = "pf_6";
+ function = "ssp1";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_mosi_cfg {
+ pins = "pf_7";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_ssel_cfg {
+ pins = "pf_5";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rxd_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ uart0_clk_dir_txd_cfg {
+ pins = "pf_8", "pf_9", "pf_10";
+ function = "uart0";
+ bias-pull-down;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ uart1_rxd_cfg {
+ pins = "pc_14";
+ function = "uart1";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart1_dtr_txd_cfg {
+ pins = "pc_12", "pc_13";
+ function = "uart1";
+ bias-pull-down;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ uart2_rxd_cfg {
+ pins = "pa_2";
+ function = "uart2";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart2_txd_cfg {
+ pins = "pa_1";
+ function = "uart2";
+ bias-pull-down;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ uart3_rx_cfg {
+ pins = "p2_4";
+ function = "uart3";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart3_tx_cfg {
+ pins = "p2_3";
+ function = "uart3";
+ bias-pull-down;
+ };
+ };
+
+ usb0_pins: usb0-pins {
+ usb0_pwr_enable_cfg {
+ pins = "p6_3";
+ function = "usb0";
+ };
+
+ usb0_pwr_fault_cfg {
+ pins = "p8_0";
+ function = "usb0";
+ bias-disable;
+ input-enable;
+ };
+ };
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <&vcc>;
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins>;
+};
+
+/* Pin conflict with EMC, muxed by JP5 and JP6 */
+&can1 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1_pins>;
+};
+
+&emc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emc_pins>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-access-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ /* SST/Microchip SST39VF1601 */
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ };
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <50000000>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ sensor@49 {
+ compatible = "lm75";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ };
+};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ max-memory-bandwidth = <92240000>;
+
+ port {
+ lcdc_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_rmii_pins>;
+ phy-handle = <&phy1>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&mmcsd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pins>;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>;
+};
+
+/* Pin conflict with SSP0, the latter is routed to J17 pin header */
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ /* Atmel AT25DF321A */
+ flash {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <51000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&ssp1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp1_pins>;
+ num-cs = <1>;
+ cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
+};
+
+/* Routed to J17 pin header */
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+/* RS485 */
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+/* Routed to J17 pin header */
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+};
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
index 6a83f30029ea..ba1ddd93b8f8 100644
--- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
+++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
@@ -18,6 +18,7 @@
/ {
model = "Moxa UC-8410A";
+ compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a";
aliases {
enet0_rgmii_phy = &rgmii_phy0;
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 923a25760516..ca60730dda40 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -51,6 +51,7 @@
/ {
model = "LS1021A QDS Board";
+ compatible = "fsl,ls1021a-qds", "fsl,ls1021a";
aliases {
enet0_rgmii_phy = &rgmii_phy1;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 8b48c3c7cd21..97e1fb7ea932 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -51,6 +51,7 @@
/ {
model = "LS1021A TWR Board";
+ compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
aliases {
enet2_rgmii_phy = &rgmii_phy1;
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index ad75959b99c1..b4f2723ecd86 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -45,11 +45,12 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton64.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
compatible = "fsl,ls1021a";
interrupt-parent = <&gic>;
@@ -88,6 +89,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>;
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -125,6 +131,13 @@
interrupt-parent = <&gic>;
ranges;
+ ddr: memory-controller@1080000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ };
+
gic: interrupt-controller@1400000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
@@ -812,6 +825,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@3400000 {
@@ -825,6 +839,7 @@
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
+ num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@@ -849,6 +864,7 @@
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
+ num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 2ab74860d962..6f54a8897574 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -47,9 +47,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-/include/ "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&gic>;
L2: l2-cache-controller@c4200000 {
@@ -72,6 +73,13 @@
#size-cells = <1>;
ranges = <0x0 0xc1100000 0x200000>;
+ hhi: system-controller@4000 {
+ compatible = "amlogic,meson-hhi-sysctrl",
+ "simple-mfd",
+ "syscon";
+ reg = <0x4000 0x400>;
+ };
+
assist: assist@7c00 {
compatible = "amlogic,meson-mx-assist", "syscon";
reg = <0x7c00 0x200>;
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
index fc48cff71ddf..997e69c5963e 100644
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -61,6 +61,7 @@
};
memory {
+ device_type = "memory";
reg = <0x40000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index ca978ab952cd..65585255910a 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -70,6 +70,14 @@
};
};
+ apb2: bus@d0000000 {
+ compatible = "simple-bus";
+ reg = <0xd0000000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd0000000 0x40000>;
+ };
+
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 55fb090a40ef..8686abd5de7f 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -57,6 +57,7 @@
};
memory {
+ device_type = "memory";
reg = <0x40000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index e5cd325d7ea8..a9781243453e 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -166,6 +166,32 @@
};
};
+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-182150000 {
+ opp-hz = /bits/ 64 <182150000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-318750000 {
+ opp-hz = /bits/ 64 <318750000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-425000000 {
+ opp-hz = /bits/ 64 <425000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-637500000 {
+ opp-hz = /bits/ 64 <637500000>;
+ opp-microvolt = <1150000>;
+ turbo-mode;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
@@ -201,6 +227,46 @@
no-map;
};
};
+
+ apb: bus@d0000000 {
+ compatible = "simple-bus";
+ reg = <0xd0000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd0000000 0x200000>;
+
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson8-mali", "arm,mali-450";
+ reg = <0xc0000 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2", "pp4", "ppmmu4",
+ "pp5", "ppmmu5", "pp6", "ppmmu6";
+ resets = <&reset RESET_MALI>;
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ switch-delay = <0xffff>;
+ };
+ };
}; /* end of / */
&aobus {
@@ -261,13 +327,6 @@
};
&cbus {
- clkc: clock-controller@4000 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "amlogic,meson8-clkc";
- reg = <0x8000 0x4>, <0x4000 0x400>;
- };
-
reset: reset-controller@4404 {
compatible = "amlogic,meson8b-reset";
reg = <0x4404 0x9c>;
@@ -390,6 +449,11 @@
compatible = "amlogic,meson8-efuse";
clocks = <&clkc CLKID_EFUSE>;
clock-names = "core";
+
+ temperature_calib: calib@1f4 {
+ /* only the upper two bytes are relevant */
+ reg = <0x1f4 0x4>;
+ };
};
&ethmac {
@@ -402,6 +466,14 @@
status = "okay";
};
+&hhi {
+ clkc: clock-controller {
+ compatible = "amlogic,meson8-clkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+};
+
&hwrng {
compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
clocks = <&clkc CLKID_RNG0>;
@@ -469,6 +541,9 @@
clocks = <&clkc CLKID_XTAL>,
<&clkc CLKID_SAR_ADC>;
clock-names = "clkin", "core";
+ amlogic,hhi-sysctrl = <&hhi>;
+ nvmem-cells = <&temperature_calib>;
+ nvmem-cell-names = "temperature_calib";
};
&sdio {
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index d50fc2f60fa3..3ca9638fad09 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -23,6 +23,7 @@
};
memory {
+ device_type = "memory";
reg = <0x40000000 0x40000000>;
};
@@ -64,6 +65,11 @@
timeout-ms = <20000>;
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&saradc 8>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -83,6 +89,9 @@
};
usb_vbus: regulator-usb-vbus {
+ /*
+ * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
+ */
compatible = "regulator-fixed";
regulator-name = "USB_VBUS";
@@ -90,11 +99,20 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /*
+ * signal name from the schematics: USB_PWR_EN
+ */
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_5v: regulator-vcc5v {
+ /*
+ * supplied by the main power input which called PWR_5V_STB
+ * in the schematics
+ */
compatible = "regulator-fixed";
regulator-name = "VCC5V";
@@ -102,6 +120,9 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ /*
+ * signal name from the schematics: 3V3_5V_EN
+ */
gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
regulator-boot-on;
@@ -109,12 +130,18 @@
};
vcck: regulator-vcck {
+ /*
+ * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+ * Synchronous Step Down Regulator.
+ */
compatible = "pwm-regulator";
regulator-name = "VCCK";
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
+ vin-supply = <&vcc_5v>;
+
pwms = <&pwm_cd 0 1148 0>;
pwm-dutycycle-range = <100 0>;
@@ -123,19 +150,66 @@
};
vcc_1v8: regulator-vcc1v8 {
+ /*
+ * ABLIC S-1339D18-M5001-GP
+ */
compatible = "regulator-fixed";
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&vcc_3v3>;
};
vcc_3v3: regulator-vcc3v3 {
+ /*
+ * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+ * Synchronous Step Down Regulator. Also called
+ * VDDIO_AO3.3V in the schematics.
+ */
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_5v>;
+ };
+
+ vcc_ddr3: regulator-vcc-ddr3 {
+ /*
+ * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+ * Synchronous Step Down Regulator. Also called
+ * DDR3_1.5V in the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC_DDR3_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ vin-supply = <&vcc_5v>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_rtc: regulator-vcc-rtc {
+ /*
+ * Global Mixed-mode Technology Inc. G918T12U-GP
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC_RTC";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ /*
+ * When the board is powered then the input is VCC3V3,
+ * otherwise power is taken from the coin cell battery.
+ */
+ vin-supply = <&vcc_3v3>;
};
};
@@ -164,6 +238,10 @@
eth_phy0: ethernet-phy@0 {
/* IC Plus IP101A/G (0x02430c54) */
reg = <0>;
+ icplus,select-interrupt;
+ interrupt-parent = <&gpio_intc>;
+ /* GPIOH_3 */
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
};
};
};
@@ -211,6 +289,56 @@
};
};
+&gpio_ao {
+ gpio-line-names = "Linux_TX", "Linux_RX",
+ "SLP_S5_N", "USB2_OC_FLAG#",
+ "HUB_RST", "USB_PWR_EN",
+ "I2S_IN", "SLP_S1_N",
+ "TCK", "TMS", "TDI", "TDO",
+ "HDMI_CEC", "5640_IRQ",
+ "MUTE", "S805_TEST#";
+};
+
+&gpio {
+ gpio-line-names = /* Bank GPIOX */
+ "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
+ "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
+ "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
+ "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
+ "UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
+ "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
+ /* Bank GPIOY */
+ "", "", "", "", "", "", "", "", "", "",
+ "", "",
+ /* Bank GPIODV */
+ "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
+ "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
+ "VDDEE_PWM 3V3_5V_EN",
+ /* Bank GPIOH */
+ "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+ "RMII_IRQ", "RMII_RST#", "RMII_TXD1",
+ "RMII_TXD0", "AV_select_1", "AV_select_2",
+ "MCU_Control_S",
+ /* Bank CARD */
+ "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
+ "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
+ "CARD_EN_DET (CARD_DET)",
+ /* Bank BOOT */
+ "NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
+ "NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
+ "NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
+ "NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
+ "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
+ "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
+ "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
+ "nWE_S1 NAND_nWE (EMMC)", "", "", "SPI_CS",
+ /* Bank DIF */
+ "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
+ "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
+ "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
+ "RMII_MDIO";
+};
+
&pwm_cd {
status = "okay";
pinctrl-0 = <&pwm_c1_pins>;
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 5c9b76af8d42..08ddd7fb0bf8 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -60,6 +60,7 @@
};
memory {
+ device_type = "memory";
reg = <0x40000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 0f0a46ddf3ff..3b0e0f8fbc23 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -62,6 +62,7 @@
};
memory {
+ device_type = "memory";
reg = <0x40000000 0x40000000>;
};
@@ -118,6 +119,11 @@
1800000 1>;
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&saradc 8>;
+ };
+
vcc_1v8: regulator-vcc-1v8 {
/*
* RICHTEK RT9179 configured for a fixed output voltage of
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 22d775460767..fe84a8c3ce81 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -158,6 +158,32 @@
};
};
+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-255000000 {
+ opp-hz = /bits/ 64 <255000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-364300000 {
+ opp-hz = /bits/ 64 <364300000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-425000000 {
+ opp-hz = /bits/ 64 <425000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-637500000 {
+ opp-hz = /bits/ 64 <637500000>;
+ opp-microvolt = <1150000>;
+ turbo-mode;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a5-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
@@ -178,6 +204,34 @@
no-map;
};
};
+
+ apb: bus@d0000000 {
+ compatible = "simple-bus";
+ reg = <0xd0000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd0000000 0x200000>;
+
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson8b-mali", "arm,mali-450";
+ reg = <0xc0000 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1";
+ resets = <&reset RESET_MALI>;
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ switch-delay = <0xffff>;
+ };
+ };
}; /* end of / */
&aobus {
@@ -222,13 +276,6 @@
};
&cbus {
- clkc: clock-controller@4000 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "amlogic,meson8b-clkc";
- reg = <0x8000 0x4>, <0x4000 0x400>;
- };
-
reset: reset-controller@4404 {
compatible = "amlogic,meson8b-reset";
reg = <0x4404 0x9c>;
@@ -270,9 +317,7 @@
groups = "eth_tx_clk",
"eth_tx_en",
"eth_txd1_0",
- "eth_txd1_1",
"eth_txd0_0",
- "eth_txd0_1",
"eth_rx_clk",
"eth_rx_dv",
"eth_rxd1",
@@ -281,7 +326,9 @@
"eth_mdc",
"eth_ref_clk",
"eth_txd2",
- "eth_txd3";
+ "eth_txd3",
+ "eth_rxd3",
+ "eth_rxd2";
function = "ethernet";
bias-disable;
};
@@ -360,6 +407,11 @@
compatible = "amlogic,meson8b-efuse";
clocks = <&clkc CLKID_EFUSE>;
clock-names = "core";
+
+ temperature_calib: calib@1f4 {
+ /* only the upper two bytes are relevant */
+ reg = <0x1f4 0x4>;
+ };
};
&ethmac {
@@ -383,6 +435,14 @@
status = "okay";
};
+&hhi {
+ clkc: clock-controller {
+ compatible = "amlogic,meson8-clkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+};
+
&hwrng {
compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
clocks = <&clkc CLKID_RNG0>;
@@ -450,6 +510,9 @@
clocks = <&clkc CLKID_XTAL>,
<&clkc CLKID_SAR_ADC>;
clock-names = "clkin", "core";
+ amlogic,hhi-sysctrl = <&hhi>;
+ nvmem-cells = <&temperature_calib>;
+ nvmem-cell-names = "temperature_calib";
};
&sdio {
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index 6ac02beb5fa7..29d830ae4bf4 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -28,6 +28,7 @@
};
memory {
+ device_type = "memory";
reg = <0x40000000 0x80000000>;
};
@@ -44,6 +45,11 @@
};
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&saradc 8>;
+ };
+
vcc_3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
index d1a28c2adac5..bb87b251e16d 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -50,6 +50,10 @@
};
};
+&saradc {
+ compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
+};
+
&wdt {
compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
};
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index 350208c5e1ed..3da038ba5733 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -19,6 +19,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index ee03e0846740..f02fb97f515c 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -7,10 +7,12 @@
* publishhed by the Free Software Foundation.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,mmp2.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
aliases {
serial0 = &uart1;
serial1 = &uart2;
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index da7b3237bfe9..cbf17656bcc7 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -5,10 +5,11 @@
* Licensed under GPLv2 or later.
*/
-/include/ "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "moxa,moxart";
model = "MOXART";
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index 23467390558d..96fb5a5cf4d3 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -171,7 +171,7 @@
uart0: serial@4000 {
compatible = "arm,mps2-uart";
reg = <0x4000 0x1000>;
- interrupts = <0 1 12>;
+ interrupts = <0>, <1>, <12>;
clocks = <&sysclk>;
status = "disabled";
};
@@ -179,7 +179,7 @@
uart1: serial@5000 {
compatible = "arm,mps2-uart";
reg = <0x5000 0x1000>;
- interrupts = <2 3 12>;
+ interrupts = <2>, <3>, <12>;
clocks = <&sysclk>;
status = "disabled";
};
@@ -187,7 +187,7 @@
uart2: serial@6000 {
compatible = "arm,mps2-uart";
reg = <0x6000 0x1000>;
- interrupts = <4 5 12>;
+ interrupts = <4>, <5>, <12>;
clocks = <&sysclk>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index be0edb3dae6c..88f8fd22302a 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -13,6 +13,7 @@
compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
memory {
+ device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 180377e56ef4..51e1305c6471 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -12,10 +12,11 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
-#include "skeleton64.dtsi"
#include "mt2701-pinfunc.h"
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
compatible = "mediatek,mt2701";
interrupt-parent = <&cirq>;
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
index ca137897ed60..755a0774a8ee 100644
--- a/arch/arm/boot/dts/mt6580-evbp1.dts
+++ b/arch/arm/boot/dts/mt6580-evbp1.dts
@@ -22,6 +22,7 @@
};
memory {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
index 2bdc5ed12fca..9e17698c0609 100644
--- a/arch/arm/boot/dts/mt6580.dtsi
+++ b/arch/arm/boot/dts/mt6580.dtsi
@@ -7,7 +7,6 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
/ {
compatible = "mediatek,mt6580";
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts
index 7bbaa1279a26..1e7079a3b449 100644
--- a/arch/arm/boot/dts/mt6589-aquaris5.dts
+++ b/arch/arm/boot/dts/mt6589-aquaris5.dts
@@ -18,6 +18,7 @@
};
memory {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
index 28df8495686a..f3ccb70c0779 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -7,9 +7,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "mediatek,mt6589";
interrupt-parent = <&sysirq>;
diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts
index 02849f6548e3..5e00c1cca2d1 100644
--- a/arch/arm/boot/dts/mt6592-evb.dts
+++ b/arch/arm/boot/dts/mt6592-evb.dts
@@ -13,7 +13,7 @@
compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
memory {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
};
-
diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi
index 8696ac891d60..3716f8db951c 100644
--- a/arch/arm/boot/dts/mt6592.dtsi
+++ b/arch/arm/boot/dts/mt6592.dtsi
@@ -7,9 +7,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "mediatek,mt6592";
interrupt-parent = <&sysirq>;
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 98f115966391..a79f0b6c3429 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -187,17 +187,26 @@
cooling-maps {
map0 {
trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_active>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map2 {
trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts
index 308829b2da86..560687af87dc 100644
--- a/arch/arm/boot/dts/mt8127-moose.dts
+++ b/arch/arm/boot/dts/mt8127-moose.dts
@@ -13,6 +13,7 @@
compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
memory {
+ device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index 3adfc6f7859c..aced173c2a52 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -7,9 +7,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
compatible = "mediatek,mt8127";
interrupt-parent = <&sysirq>;
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index 0ace7a40a60d..f6147fe62f41 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -13,6 +13,7 @@
compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
memory {
+ device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 688069dc1533..0e4e835026db 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -9,10 +9,11 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/mt8135-resets.h>
-#include "skeleton64.dtsi"
#include "mt8135-pinfunc.h"
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
compatible = "mediatek,mt8135";
interrupt-parent = <&sysirq>;
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 1a5ae4cd107f..5a3c1f9d1832 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -9,9 +9,9 @@
*
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&intc>;
cpus {
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 4c1227d1e79b..17c89df6ce6b 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -122,6 +122,7 @@
};
&mmc2 {
+ interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
bus-width = <4>;
@@ -132,8 +133,10 @@
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
- interrupt-parent = <&gpio5>;
- interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */
+ /* gpio_149 with uart1_rts pad as wakeirq */
+ interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
+ <&omap3_pmx_core 0x14e>;
+ interrupt-names = "irq", "wakeup";
ref-clock-frequency = <38400000>;
};
};
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index ce7f42f9448c..b4109f48ec18 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -86,6 +86,10 @@
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
>;
};
@@ -127,9 +131,13 @@
>;
};
+ /*
+ * Note that gpio_150 pulled high with internal pull to prevent wlcore
+ * reset on return from off mode in idle.
+ */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */
OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
>;
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 93b420934e8e..04f2b53d4d3d 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -32,6 +32,14 @@
display1 = &tv0;
};
+ ldo_3v3: fixedregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ldo_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
/* fixed 26MHz oscillator */
hfclk_26m: oscillator {
#clock-cells = <0>;
@@ -116,6 +124,7 @@
spi-cpol;
spi-cpha;
+ backlight= <&backlight>;
label = "lcd";
port {
lcd_in: endpoint {
@@ -125,7 +134,7 @@
};
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm11 0 12000000 0>;
pwm-names = "backlight";
@@ -224,6 +233,15 @@
};
};
+&omap3_pmx_wkup {
+ gpio1_pins: pinmux_gpio1_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
+ >;
+ };
+};
+
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
@@ -312,6 +330,12 @@
>;
};
+ gps_pins: pinmux_gps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
+ >;
+ };
+
hdq_pins: hdq_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
@@ -636,6 +660,11 @@
status = "disabled";
};
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
@@ -644,6 +673,14 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+ gnss: gnss {
+ compatible = "wi2wi,w2sg0004";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gps_pins>;
+ sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ lna-supply = <&vsim>;
+ vcc-supply = <&ldo_3v3>;
+ };
};
&uart3 {
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index bd232b1b24cb..223b47ac596e 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -82,7 +82,7 @@
/*
* for WL183x module see
- * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
*/
&wifi_pwrseq {
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 67d77eee9433..e21ec929f096 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -359,20 +359,24 @@
&mmc3 {
vmmc-supply = <&wl12xx_vmmc>;
+ /* uart2_tx.sdmmc3_dat1 pad as wakeirq */
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0xde>;
-
+ interrupt-names = "irq", "wakeup";
non-removable;
bus-width = <4>;
cap-power-off-card;
+ keep-power-in-suspend;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1285", "ti,wl1283";
reg = <2>;
- interrupt-parent = <&gpio4>;
- interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
+ /* gpio_100 with gpmc_wait2 pad as wakeirq */
+ interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
+ <&omap4_pmx_core 0x4e>;
+ interrupt-names = "irq", "wakeup";
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 27895c1604b9..926f018823a4 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -485,8 +485,10 @@
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
- interrupt-parent = <&gpio2>;
- interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
+ /* gpio_53 with gpmc_ncs3 pad as wakeup */
+ interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
+ <&omap4_pmx_core 0x3a>;
+ interrupt-names = "irq", "wakeup";
ref-clock-frequency = <38400000>;
};
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 9dc7ec7655cb..c88817bdcc56 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -26,6 +26,9 @@
};
vdd_eth: fixedregulator-vdd-eth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_enable_gpio>;
+
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
@@ -352,6 +355,29 @@
OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
+
+ /* gpio_48 for ENET_ENABLE */
+ enet_enable_gpio: pinmux_enet_enable_gpio {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ >;
+ };
+
+ ks8851_pins: pinmux_ks8851_pins {
+ pinctrl-single,pins = <
+ /* ENET_INT */
+ OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */
+ /*
+ * Misterious pin which makes the ethernet working
+ * The legacy board file requested this pin on boot
+ * (ETH_KS8851_QUART) and set it to high, similarly to
+ * the ENET_ENABLE pin.
+ * We could use gpio-hog to keep it high, but let's use
+ * it as a reset GPIO for ks8851.
+ */
+ OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */
+ >;
+ };
};
&i2c1 {
@@ -452,12 +478,16 @@
pinctrl-0 = <&mcspi1_pins>;
eth@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ks8851_pins>;
+
compatible = "ks8851";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
vdd-supply = <&vdd_eth>;
+ reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
index 8c2449da6f00..422958d13d42 100644
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
@@ -19,6 +19,7 @@
compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
+ device_type = "memory";
reg = <0x00000000 0x4000000>; /* 64 MB */
};
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index b545d0f228a5..0043e0040153 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -25,6 +25,7 @@
compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
+ device_type = "memory";
reg = <0x00000000 0x4000000>; /* 64 MB */
};
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts
index 0d97ded66257..2fbc17d6dfa4 100644
--- a/arch/arm/boot/dts/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/orion5x-lswsgl.dts
@@ -55,6 +55,7 @@
compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
+ device_type = "memory";
reg = <0x00000000 0x8000000>; /* 128 MB */
};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
index 0324cb54939d..0ca6208a267d 100644
--- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
@@ -19,6 +19,7 @@
compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
+ device_type = "memory";
reg = <0x00000000 0x4000000>; /* 64 MB */
};
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
index 9f6ae4e1de06..ea081afa469d 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -21,6 +21,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x2000000>; /* 32 MB */
};
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
index d1817af53e0b..487324f7c54e 100644
--- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
@@ -16,6 +16,7 @@
compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
+ device_type = "memory";
reg = <0x00000000 0x4000000>; /* 64 MB */
};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index fbccfbbab223..61e631b3fd8b 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -6,11 +6,11 @@
* warranty of any kind, whether express or implied.
*/
-#include "skeleton.dtsi"
-
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Marvell Orion5x SoC";
compatible = "marvell,orion5x";
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
index c2b48a1838eb..3a26650de4eb 100644
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -6,11 +6,12 @@
* Licensed under GPLv2 or later
*/
-/include/ "skeleton.dtsi"
#include <dt-bindings/clock/oxsemi,ox810se.h>
#include <dt-bindings/reset/oxsemi,ox810se.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "oxsemi,ox810se";
cpus {
@@ -25,6 +26,7 @@
};
memory {
+ device_type = "memory";
/* Max 256MB @ 0x48000000 */
reg = <0x48000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
index 085bbd33eadc..f3239586f38d 100644
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -6,12 +6,13 @@
* Licensed under GPLv2 or later
*/
-/include/ "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/oxsemi,ox820.h>
#include <dt-bindings/reset/oxsemi,ox820.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "oxsemi,ox820";
cpus {
@@ -35,6 +36,7 @@
};
memory {
+ device_type = "memory";
/* Max 512MB @ 0x60000000 */
reg = <0x60000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index a1266cf8776c..291a28f34762 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -10,7 +10,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-/include/ "skeleton.dtsi"
/ {
model = "Picochip picoXcell PC3X2";
compatible = "picochip,pc3x2";
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
index d78cd207eca1..bf9a39ea76b0 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -10,7 +10,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-/include/ "skeleton.dtsi"
/ {
model = "Picochip picoXcell PC3X3";
compatible = "picochip,pc3x3";
diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts
index 57286b4e7b87..55594b3bbc99 100644
--- a/arch/arm/boot/dts/prima2-evb.dts
+++ b/arch/arm/boot/dts/prima2-evb.dts
@@ -15,6 +15,7 @@
compatible = "sirf,prima2", "sirf,prima2-cb";
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 1ca1a9aa953f..54d4f8850e22 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -6,7 +6,6 @@
* Licensed under GPLv2 or later.
*/
-/include/ "skeleton.dtsi"
/ {
compatible = "sirf,prima2";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index b899e25cbb1b..7137f3550183 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -7,10 +7,12 @@
* publishhed by the Free Software Foundation.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,pxa168.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
aliases {
serial0 = &uart1;
serial1 = &uart2;
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index e83879d97aea..bd6bf6d9300f 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -6,7 +6,6 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include "dt-bindings/clock/pxa-clock.h"
#define PMGROUP(pin) #pin
@@ -29,6 +28,8 @@
}
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Marvell PXA2xx family SoC";
compatible = "marvell,pxa2xx";
interrupt-parent = <&pxairq>;
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 0868f6729be1..c88553a8ee29 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -7,10 +7,12 @@
* publishhed by the Free Software Foundation.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,pxa910.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
aliases {
serial0 = &uart1;
serial1 = &uart2;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 48c3cf427610..1374c2e52c20 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
@@ -10,6 +9,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm APQ8064";
compatible = "qcom,apq8064";
interrupt-parent = <&intc>;
@@ -94,6 +95,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 899f28533ed7..0a0fb147ebb9 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-#include "skeleton.dtsi"
-
#include <dt-bindings/clock/qcom,gcc-apq8084.h>
#include <dt-bindings/gpio/gpio.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm APQ 8084";
compatible = "qcom,apq8084";
interrupt-parent = <&intc>;
@@ -87,6 +87,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
firmware {
scm {
compatible = "qcom,scm";
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 2d56008d8d6b..9e75f97770ce 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -13,12 +13,14 @@
/dts-v1/;
-#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
model = "Qualcomm Technologies, Inc. IPQ4019";
compatible = "qcom,ipq4019";
interrupt-parent = <&intc>;
@@ -133,6 +135,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
@@ -396,7 +403,7 @@
ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
0x82000000 0 0x40300000 0x40300000 0 0x400000>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index f793cd1ad6d0..16c0da97932c 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
@@ -11,6 +10,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm IPQ8064";
compatible = "qcom,ipq8064";
interrupt-parent = <&intc>;
@@ -45,6 +46,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 7869898e392d..26b034bd19d2 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -50,6 +50,7 @@
compatible = "swir,wp8548", "qcom,mdm9615";
memory {
+ device_type = "memory";
reg = <0x48000000 0x7F00000>;
};
};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index c852b69229c9..e49f67ad5dbc 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -45,8 +45,6 @@
/dts-v1/;
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
@@ -54,6 +52,8 @@
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm MDM9615";
compatible = "qcom,mdm9615";
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 70698941f64c..993107ed1476 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -1,14 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm MSM8660";
compatible = "qcom,msm8660";
interrupt-parent = <&intc>;
@@ -39,6 +39,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
cpu-pmu {
compatible = "qcom,scorpion-mp-pmu";
interrupts = <1 9 0x304>;
@@ -133,6 +138,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ status = "disabled";
syscon-tcsr = <&tcsr>;
@@ -140,7 +146,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16540000 0x1000>,
<0x16500000 0x1000>;
- interrupts = <GIC_SPI 156 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -149,7 +155,7 @@
gsbi6_i2c: i2c@16580000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16580000 0x1000>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -167,6 +173,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ status = "disabled";
syscon-tcsr = <&tcsr>;
@@ -174,7 +181,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
- interrupts = <GIC_SPI 158 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -183,7 +190,7 @@
gsbi7_i2c: i2c@16680000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16680000 0x1000>;
- interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -207,7 +214,7 @@
gsbi8_i2c: i2c@19880000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x19880000 0x1000>;
- interrupts = <GIC_SPI 161 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -232,7 +239,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
- interrupts = <0 195 IRQ_TYPE_NONE>;
+ interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -241,7 +248,7 @@
gsbi12_i2c: i2c@19c80000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x19c80000 0x1000>;
- interrupts = <0 196 IRQ_TYPE_NONE>;
+ interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 1733d8f40ab1..f2aeaccdc1ad 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -1,14 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm MSM8960";
compatible = "qcom,msm8960";
interrupt-parent = <&intc>;
@@ -44,6 +44,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 10 0x304>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 51444c53fc72..b3b04736a159 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -220,6 +220,20 @@
};
};
};
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_pin>;
+ };
};
&soc {
@@ -242,6 +256,30 @@
};
};
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
i2c3_pins: i2c3 {
mux {
pins = "gpio10", "gpio11";
@@ -283,6 +321,32 @@
pinctrl-0 = <&sdhc1_pin_a>;
};
+ sdhci@f98a4900 {
+ status = "ok";
+
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bcrmf@1 {
+ compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ brcm,drive-strength = <10>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
@@ -342,6 +406,24 @@
};
};
+ i2c@f9923000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ charger: bq24192@6b {
+ compatible = "ti,bq24192";
+ reg = <0x6b>;
+ interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+ omit-battery-class;
+
+ usb_otg_vbus: usb-otg-vbus { };
+ };
+ };
+
i2c@f9925000 {
status = "ok";
pinctrl-names = "default";
@@ -359,6 +441,31 @@
amstaos,proximity-diodes = <0>;
};
};
+
+ usb@f9a55000 {
+ status = "ok";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ extcon = <&charger>, <&usb_id>;
+ vbus-supply = <&usb_otg_vbus>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "ok";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+ };
};
&spmi_bus {
@@ -371,6 +478,29 @@
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
+
+ wlan_sleep_clk_pin: wl-sleep-clk {
+ pins = "gpio16";
+ function = "func2";
+
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_regulator_pin: wl-reg-active {
+ pins = "gpio17";
+ function = "normal";
+
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ otg {
+ gpio-hog;
+ gpios = <35 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "otg-gpio";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ca266a5f021d..45b5c8ef0374 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -6,9 +6,10 @@
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Qualcomm MSM8974";
compatible = "qcom,msm8974";
interrupt-parent = <&intc>;
@@ -130,6 +131,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
@@ -706,6 +712,17 @@
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
+ i2c@f9923000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9923000 0x1000>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 2515c5c217ac..9a91b758f7aa 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -63,6 +63,7 @@
compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8941_gpios 0 0 36>;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
new file mode 100644
index 000000000000..991e09de1219
--- /dev/null
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZA2MEVB board
+ *
+ * Copyright (C) 2018 Renesas Electronics
+ *
+ */
+
+/dts-v1/;
+#include "r7s9210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
+
+/ {
+ model = "RZA2MEVB";
+ compatible = "renesas,rza2mevb", "renesas,r7s9210";
+
+ aliases {
+ serial0 = &scif4;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x00800000>; /* HyperRAM */
+ };
+
+ lbsc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
+ };
+ green {
+ gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+/* EXTAL */
+&extal_clk {
+ clock-frequency = <24000000>; /* 24MHz */
+};
+
+/* RTC_X1 */
+&rtc_x1_clk {
+ clock-frequency = <32768>;
+};
+
+&pinctrl {
+ /* Serial Console */
+ scif4_pins: serial4 {
+ pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
+ <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
+ };
+};
+
+/* High resolution System tick timers */
+&ostm0 {
+ status = "okay";
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+/* Serial Console */
+&scif4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&scif4_pins>;
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
new file mode 100644
index 000000000000..22baa96f5974
--- /dev/null
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R7S9210 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corporation
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r7s9210-cpg-mssr.h>
+
+/ {
+ compatible = "renesas,r7s9210";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* External clocks */
+ extal_clk: extal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ /* Value must be set by board */
+ clock-frequency = <0>;
+ };
+
+ rtc_x1_clk: rtc_x1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ /* If clk present, value (32678) must be set by board */
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ clock-frequency = <528000000>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ L2: cache-controller@1f003000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x1f003000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ arm,early-bresp-disable;
+ arm,full-line-zero-disable;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ scif0: serial@e8007000 {
+ compatible = "renesas,scif-r7s9210";
+ reg = <0xe8007000 0x18>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD 47>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ scif1: serial@e8007800 {
+ compatible = "renesas,scif-r7s9210";
+ reg = <0xe8007800 0x18>;
+ interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD 46>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ scif2: serial@e8008000 {
+ compatible = "renesas,scif-r7s9210";
+ reg = <0xe8008000 0x18>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD 45>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ scif3: serial@e8008800 {
+ compatible = "renesas,scif-r7s9210";
+ reg = <0xe8008800 0x18>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD 44>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ scif4: serial@e8009000 {
+ compatible = "renesas,scif-r7s9210";
+ reg = <0xe8009000 0x18>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD 43>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm0: timer@e803b000 {
+ compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+ reg = <0xe803b000 0x30>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 36>;
+ clock-names = "ostm0";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm1: timer@e803c000 {
+ compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+ reg = <0xe803c000 0x30>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 35>;
+ clock-names = "ostm1";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm2: timer@e803d000 {
+ compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+ reg = <0xe803d000 0x30>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 34>;
+ clock-names = "ostm2";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@e8221000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xe8221000 0x1000>,
+ <0xe8222000 0x1000>;
+ };
+
+ cpg: clock-controller@fcfe0010 {
+ compatible = "renesas,r7s9210-cpg-mssr";
+ reg = <0xfcfe0010 0x455>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ wdt: watchdog@fcfe7000 {
+ compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt";
+ reg = <0xfcfe7000 0x26>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_CORE R7S9210_CLK_P0>;
+ };
+
+ bsid: chipid@fcfe8004 {
+ compatible = "renesas,bsid";
+ reg = <0xfcfe8004 4>;
+ };
+
+ pinctrl: pin-controller@fcffe000 {
+ compatible = "renesas,r7s9210-pinctrl";
+ reg = <0xfcffe000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 176>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 3adc158a40bb..de981d629bdd 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -15,25 +15,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &iic0;
- i2c7 = &iic1;
- i2c8 = &iic3;
- spi0 = &qspi;
- spi1 = &msiof0;
- spi2 = &msiof1;
- spi3 = &msiof2;
- vin0 = &vin0;
- vin1 = &vin1;
- vin2 = &vin2;
- };
-
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
@@ -154,6 +135,16 @@
#size-cells = <2>;
ranges;
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a7743-wdt",
+ "renesas,rcar-gen2-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7743",
"renesas,rcar-gen2-gpio";
@@ -310,16 +301,6 @@
reg = <0 0xe6160000 0 0x100>;
};
- rwdt: watchdog@e6020000 {
- compatible = "renesas,r8a7743-wdt",
- "renesas,rcar-gen2-wdt";
- reg = <0 0xe6020000 0 0x0c>;
- clocks = <&cpg CPG_MOD 402>;
- power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
- resets = <&cpg 402>;
- status = "disabled";
- };
-
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7743-sysc";
reg = <0 0xe6180000 0 0x200>;
@@ -564,9 +545,7 @@
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7743",
- "renesas,rcar-gen2-iic",
- "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7743";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 04148d608fc4..fa74a262107b 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -998,6 +998,54 @@
status = "disabled";
};
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7744",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 000>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 000>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-r8a7744",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 208>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-r8a7744",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 205>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 205>;
+ status = "disabled";
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
@@ -1068,54 +1116,6 @@
status = "disabled";
};
- msiof0: spi@e6e20000 {
- compatible = "renesas,msiof-r8a7744",
- "renesas,rcar-gen2-msiof";
- reg = <0 0xe6e20000 0 0x0064>;
- interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 000>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>,
- <&dmac1 0x51>, <&dmac1 0x52>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
- #address-cells = <1>;
- #size-cells = <0>;
- resets = <&cpg 000>;
- status = "disabled";
- };
-
- msiof1: spi@e6e10000 {
- compatible = "renesas,msiof-r8a7744",
- "renesas,rcar-gen2-msiof";
- reg = <0 0xe6e10000 0 0x0064>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 208>;
- dmas = <&dmac0 0x55>, <&dmac0 0x56>,
- <&dmac1 0x55>, <&dmac1 0x56>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
- #address-cells = <1>;
- #size-cells = <0>;
- resets = <&cpg 208>;
- status = "disabled";
- };
-
- msiof2: spi@e6e00000 {
- compatible = "renesas,msiof-r8a7744",
- "renesas,rcar-gen2-msiof";
- reg = <0 0xe6e00000 0 0x0064>;
- interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 205>;
- dmas = <&dmac0 0x41>, <&dmac0 0x42>,
- <&dmac1 0x41>, <&dmac1 0x42>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
- #address-cells = <1>;
- #size-cells = <0>;
- resets = <&cpg 205>;
- status = "disabled";
- };
-
can0: can@e6e80000 {
compatible = "renesas,can-r8a7744",
"renesas,rcar-gen2-can";
@@ -1589,33 +1589,6 @@
resets = <&cpg 408>;
};
- vsp@fe928000 {
- compatible = "renesas,vsp1";
- reg = <0 0xfe928000 0 0x8000>;
- interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 131>;
- power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
- resets = <&cpg 131>;
- };
-
- vsp@fe930000 {
- compatible = "renesas,vsp1";
- reg = <0 0xfe930000 0 0x8000>;
- interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 128>;
- power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
- resets = <&cpg 128>;
- };
-
- vsp@fe938000 {
- compatible = "renesas,vsp1";
- reg = <0 0xfe938000 0 0x8000>;
- interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 127>;
- power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
- resets = <&cpg 127>;
- };
-
pciec: pcie@fe000000 {
compatible = "renesas,pcie-r8a7744",
"renesas,pcie-rcar-gen2";
@@ -1644,9 +1617,42 @@
status = "disabled";
};
+ vsp@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 131>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
+ };
+
+ vsp@fe930000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe930000 0 0x8000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 128>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
+ };
+
+ vsp@fe938000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe938000 0 0x8000>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 127>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 127>;
+ };
+
du: display@feb00000 {
- reg = <0 0xfeb00000 0 0x40000>,
- <0 0xfeb90000 0 0x1c>;
+ compatible = "renesas,du-r8a7744";
+ reg = <0 0xfeb00000 0 0x40000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
+ status = "disabled";
ports {
#address-cells = <1>;
@@ -1660,10 +1666,36 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7744-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
- /* placeholder */
};
prr: chipid@ff000044 {
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 40b7f98d6013..77d18242ef59 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -84,12 +84,30 @@
clock-frequency = <20000000>;
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii_tx_rx";
function = "avb";
};
+ i2c3_pins: i2c3 {
+ groups = "i2c3_c";
+ function = "i2c3";
+ };
+
mmc_pins_uhs: mmc_uhs {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 05db0ccad7a6..10d996d2941f 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -367,6 +367,30 @@
status = "disabled";
};
+ hscif0: serial@ffe48000 {
+ compatible = "renesas,hscif-r8a7778",
+ "renesas,rcar-gen1-hscif", "renesas,hscif";
+ reg = <0xffe48000 96>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_HSCIF0>,
+ <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif1: serial@ffe49000 {
+ compatible = "renesas,hscif-r8a7778",
+ "renesas,rcar-gen1-hscif", "renesas,hscif";
+ reg = <0xffe49000 96>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_HSCIF1>,
+ <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
mmcif: mmc@ffe4e000 {
compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif";
reg = <0xffe4e000 0x100>;
@@ -535,6 +559,8 @@
<&cpg_clocks R8A7778_CLK_P>,
<&cpg_clocks R8A7778_CLK_P>,
<&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_S>,
+ <&cpg_clocks R8A7778_CLK_S>,
<&cpg_clocks R8A7778_CLK_P>,
<&cpg_clocks R8A7778_CLK_P>,
<&cpg_clocks R8A7778_CLK_P>,
@@ -551,6 +577,7 @@
R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1
R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3
R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5
+ R8A7778_CLK_HSCIF0 R8A7778_CLK_HSCIF1
R8A7778_CLK_TMU0 R8A7778_CLK_TMU1
R8A7778_CLK_TMU2 R8A7778_CLK_SSI0
R8A7778_CLK_SSI1 R8A7778_CLK_SSI2
@@ -560,6 +587,7 @@
clock-output-names =
"i2c0", "i2c1", "i2c2", "i2c3", "scif0",
"scif1", "scif2", "scif3", "scif4", "scif5",
+ "hscif0", "hscif1",
"tmu0", "tmu1", "tmu2", "ssi0", "ssi1",
"ssi2", "ssi3", "sru", "hspi";
};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 3bc133d9489c..3ff259207527 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -287,6 +287,32 @@
status = "disabled";
};
+ hscif0: serial@ffe48000 {
+ compatible = "renesas,hscif-r8a7779",
+ "renesas,rcar-gen1-hscif", "renesas,hscif";
+ reg = <0xffe48000 96>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSCIF0>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif1: serial@ffe49000 {
+ compatible = "renesas,hscif-r8a7779",
+ "renesas,rcar-gen1-hscif", "renesas,hscif";
+ reg = <0xffe49000 96>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSCIF1>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
pfc: pin-controller@fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 629da4cee1b9..7a7d3b84d1a6 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -94,9 +94,8 @@
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
<&osc1_clk>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0";
+ clock-names = "du.0", "du.1", "du.2", "dclkin.0";
ports {
port@0 {
@@ -104,11 +103,21 @@
remote-endpoint = <&adv7511_in>;
};
};
+ };
+};
+
+&lvds0 {
+ ports {
port@1 {
lvds_connector0: endpoint {
};
};
- port@2 {
+ };
+};
+
+&lvds1 {
+ ports {
+ port@1 {
lvds_connector1: endpoint {
};
};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 0fd19f9723df..0173eb11ec28 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -310,7 +310,6 @@
};
&i2s {
- #sound-dai-cells = <0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index d560fc4051c5..59c90863b0e7 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -289,6 +289,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s_bus>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 1c925f20dba0..0a56a2f1bc4d 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -171,7 +171,6 @@
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
bus-width = <4>;
- disable-wp;
};
&pwm3 {
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index b6a8a82d219e..9d2216d71f70 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -101,7 +101,6 @@
&mmc1 {
bus-width = <4>;
- disable-wp;
non-removable;
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index cd126b927ba8..949fa800582d 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -147,7 +147,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
@@ -309,7 +308,6 @@
&mmc1 {
bus-width = <4>;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 30dc8af0bdcb..653127a377fa 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -44,6 +44,11 @@
};
};
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop0_out>, <&vop1_out>;
+ };
+
sram: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x10000>;
@@ -57,6 +62,48 @@
};
};
+ vop0: vop@1010c000 {
+ compatible = "rockchip,rk3066-vop";
+ reg = <0x1010c000 0x19c>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC0>,
+ <&cru DCLK_LCDC0>,
+ <&cru HCLK_LCDC0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3066_PD_VIO>;
+ resets = <&cru SRST_LCDC0_AXI>,
+ <&cru SRST_LCDC0_AHB>,
+ <&cru SRST_LCDC0_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop0_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vop1: vop@1010e000 {
+ compatible = "rockchip,rk3066-vop";
+ reg = <0x1010e000 0x19c>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC1>,
+ <&cru DCLK_LCDC1>,
+ <&cru HCLK_LCDC1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3066_PD_VIO>;
+ resets = <&cru SRST_LCDC1_AXI>,
+ <&cru SRST_LCDC1_AHB>,
+ <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop1_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
i2s0: i2s@10118000 {
compatible = "rockchip,rk3066-i2s";
reg = <0x10118000 0x2000>;
@@ -669,6 +716,7 @@
<&cru SCLK_CIF0>,
<&cru ACLK_CIF0>,
<&cru HCLK_CIF0>,
+ <&cru HCLK_HDMI>,
<&cru ACLK_IPP>,
<&cru HCLK_IPP>,
<&cru ACLK_RGA>,
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index a7477a09fbe8..c8b62bbd6a4a 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -227,7 +227,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd>;
@@ -408,6 +407,21 @@
&i2c2 {
clock-frequency = <400000>;
status = "okay";
+
+ ft5606: touchscreen@3e {
+ compatible = "edt,edt-ft5506";
+ reg = <0x3e>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int &tp_rst>;
+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+ touchscreen-inverted-y;
+ /* hw ts resolution does not match display */
+ touchscreen-size-y = <1024>;
+ touchscreen-size-x = <768>;
+ touchscreen-swapped-x-y;
+ };
};
&i2c3 {
@@ -446,7 +460,6 @@
&mmc1 {
bus-width = <4>;
cap-sd-highspeed;
- cap-mmc-highspeed;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
@@ -526,7 +539,7 @@
};
cif1_pdn: cif1-pdn {
- rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
cif_avdd_en: cif-avdd-en {
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index 9ae65c767c90..c0eaa9c5490b 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -62,7 +62,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 4df7accc3ad7..350497a3ca86 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -137,7 +137,6 @@
&emmc {
cap-mmc-highspeed;
- disable-wp;
non-removable;
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
index b1b56dfdfdba..29af26e6d442 100644
--- a/arch/arm/boot/dts/rk3288-fennec.dts
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -37,7 +37,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 58ea8bed040a..3a646c5f4fcf 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -254,7 +254,6 @@
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
- disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 504ab1177aa7..fb7365b604bb 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -87,7 +87,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 596435e03132..6a51940398b5 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -109,7 +109,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
non-removable;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 6a30cadad88a..5b7e1c9e92e1 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -133,7 +133,6 @@
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
- disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
index 37093922b482..d97da89bcd51 100644
--- a/arch/arm/boot/dts/rk3288-tinker-s.dts
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -15,7 +15,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index d8bf939a3aff..0bc2409f6903 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -10,6 +10,10 @@
#include "rk3288.dtsi"
/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
/*
* The default coreboot on veyron devices ignores memory@0 nodes
* and would instead create another memory node.
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 4856a9fc0aea..40b232eb5011 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -121,7 +121,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
new file mode 100644
index 000000000000..1c4507b66fdd
--- /dev/null
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright (C) 2018 O.S. Systems Software LTDA.
+ */
+
+/dts-v1/;
+
+#include "rv1108.dtsi"
+
+/ {
+ model = "Elgin RV1108 R1 board";
+ compatible = "elgin,rv1108-r1", "rockchip,rv1108";
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ no-sd;
+ no-sdio;
+ non-removable;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <275>;
+ i2c-scl-falling-time-ns = <16>;
+ status = "okay";
+
+ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vdd_buck2>;
+ vcc6-supply = <&vdd_buck2>;
+
+ regulators {
+ vdd_core: DCDC_REG1 {
+ regulator-name= "vdd_core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_buck2: DCDC_REG2 {
+ regulator-name= "vdd_buck2";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name= "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name= "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_10: LDO_REG1 {
+ regulator-name= "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_18: LDO_REG2 {
+ regulator-name= "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd10_pmu: LDO_REG3 {
+ regulator-name= "vdd10_pmu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&spi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>;
+ status = "okay";
+
+ dh2228fv: dac@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-cpha;
+ spi-cpol;
+ };
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_host_ohci {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 203d83e3bbf5..30f3d0470ad9 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -97,8 +97,8 @@
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
- regulator-state-enabled;
- regulator-state-uv = <900000>;
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
};
};
@@ -107,7 +107,7 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <2000000>;
regulator-state-mem {
- regulator-state-disabled;
+ regulator-off-in-suspend;
};
};
@@ -116,7 +116,7 @@
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
- regulator-state-enabled;
+ regulator-on-in-suspend;
};
};
@@ -127,8 +127,8 @@
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
- regulator-state-enabled;
- regulator-state-uv = <3300000>;
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
};
};
@@ -139,7 +139,7 @@
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
- regulator-state-disabled;
+ regulator-off-in-suspend;
};
};
@@ -150,7 +150,7 @@
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
- regulator-state-disabled;
+ regulator-off-in-suspend;
};
};
@@ -161,8 +161,8 @@
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
- regulator-state-enabled;
- regulator-state-uv = <1000000>;
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
};
};
};
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index d31370ff28f4..f47ac86d2852 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -207,6 +207,7 @@
clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
clock-names = "spiclk", "apb_pclk";
dmas = <&pdma 8>, <&pdma 9>;
+ dma-names = "tx", "rx";
#dma-cells = <2>;
#address-cells = <1>;
#size-cells = <0>;
@@ -833,6 +834,42 @@
};
};
+ spim0 {
+ spim0_clk: spim0-clk {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ spim0_cs0: spim0-cs0 {
+ rockchip,pins = <1 RK_PD1 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ spim0_tx: spim0-tx {
+ rockchip,pins = <1 RK_PD3 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ spim0_rx: spim0-rx {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spim1 {
+ spim1_clk: spim1-clk {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ spim1_cs0: spim1-cs0 {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ spim1_rx: spim1-rx {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ spim1_tx: spim1-tx {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
tsadc {
otp_out: otp-out {
rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 5164386aff3a..cb371bf72f64 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -19,9 +19,12 @@
clocks {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- xti: xti {
+ xti: xti@0 {
compatible = "fixed-clock";
+ reg = <0>;
clock-frequency = <12000000>;
clock-output-names = "xti";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 575094ea7024..8ff70b856334 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -23,6 +23,31 @@
0x50000000 0x08000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mfc_left: region@43000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x43000000 0x2000000>;
+ };
+
+ mfc_right: region@51000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x51000000 0x2000000>;
+ };
+ };
+
+ vibrator_pwr: regulator-fixed-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vibrator-en";
+ enable-active-high;
+ gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ };
+
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
@@ -296,6 +321,22 @@
reg = <0x36>;
};
};
+
+ vibrator: pwm-vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm 1 44642 0>;
+ pwm-names = "enable";
+ vcc-supply = <&vibrator_pwr>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_out>;
+ };
+
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_syscon>;
+ offset = <0x681c>; /* PS_HOLD_CONTROL */
+ value = <0x5200>;
+ };
};
&fimd {
@@ -329,6 +370,27 @@
status = "okay";
};
+&i2c2 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
+ samsung,i2c-slave-addr = <0x10>;
+ status = "okay";
+
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpj0>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_irq>;
+ reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mfc {
+ memory-region = <&mfc_left>, <&mfc_right>;
+};
+
&pinctrl0 {
wlan_bt_en: wlan-bt-en {
samsung,pins = "gpb-5";
@@ -350,6 +412,13 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ bt_host_wake: bt-host-wake {
+ samsung,pins = "gph2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
tf_detect: tf-detect {
samsung,pins = "gph3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -362,6 +431,17 @@
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
+
+ ts_irq: ts-irq {
+ samsung,pins = "gpj0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+};
+
+&pwm {
+ samsung,pwm-outputs = <1>;
};
&sdhci1 {
@@ -399,6 +479,16 @@
&uart0 {
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <115200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>;
+ shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>;
+ };
};
&uart1 {
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ccf761b1babf..07a8d9bbe5b8 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -11,13 +11,6 @@
chosen {
stdout-path = &uart2;
- /*
- * It's hard to change those parameters in stock bootloader,
- * since it requires special hardware/cable.
- * Let's hardocde bootargs for now, till u-boot port is finished,
- * with which it should be easier.
- */
- bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
};
gpio-keys {
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index 842276749717..cf161bbfbacf 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -11,13 +11,6 @@
chosen {
stdout-path = &uart2;
- /*
- * It's hard to change those parameters in stock bootloader,
- * since it requires special hardware/cable.
- * Let's hardocde bootargs for now, till u-boot port is finished,
- * with which it should be easier.
- */
- bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk";
};
nand_pwrseq: nand-pwrseq {
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 12eac8930eac..a44d5eb56bed 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -25,6 +25,8 @@
aliases {
csis0 = &csis0;
+ dmc0 = &dmc0;
+ dmc1 = &dmc1;
fimc0 = &fimc0;
fimc1 = &fimc1;
fimc2 = &fimc2;
@@ -78,7 +80,7 @@
};
};
- onenand: onenand@b0000000 {
+ onenand: onenand@b0600000 {
compatible = "samsung,s5pv210-onenand";
reg = <0xb0600000 0x2000>,
<0xb0000000 0x20000>,
@@ -511,7 +513,7 @@
};
fimd: fimd@f8000000 {
- compatible = "samsung,exynos4210-fimd";
+ compatible = "samsung,s5pv210-fimd";
interrupt-parent = <&vic2>;
reg = <0xf8000000 0x20000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
@@ -521,6 +523,16 @@
status = "disabled";
};
+ dmc0: dmc@f0000000 {
+ compatible = "samsung,s5pv210-dmc";
+ reg = <0xf0000000 0x1000>;
+ };
+
+ dmc1: dmc@f1400000 {
+ compatible = "samsung,s5pv210-dmc";
+ reg = <0xf1400000 0x1000>;
+ };
+
g2d: g2d@fa000000 {
compatible = "samsung,s5pv210-g2d";
reg = <0xfa000000 0x1000>;
@@ -542,6 +554,15 @@
#dma-requests = <1>;
};
+ rotator: rotator@fa300000 {
+ compatible = "samsung,s5pv210-rotator";
+ reg = <0xfa300000 0x1000>;
+ interrupt-parent = <&vic2>;
+ interrupts = <4>;
+ clocks = <&clocks CLK_ROTATOR>;
+ clock-names = "rotator";
+ };
+
i2c1: i2c@fab00000 {
compatible = "samsung,s3c2440-i2c";
reg = <0xfab00000 0x1000>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index dc2280d9127f..d159ee42ef29 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -43,13 +43,14 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel SAMA5D2 family SoC";
compatible = "atmel,sama5d2";
interrupt-parent = <&aic>;
@@ -113,6 +114,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 1408fa4a62e4..02198772eb81 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -8,7 +8,6 @@
* Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -16,6 +15,8 @@
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel SAMA5D3 family SoC";
compatible = "atmel,sama5d3", "atmel,sama5";
interrupt-parent = <&aic>;
@@ -56,6 +57,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 2604fd07dd53..6c1e41f94549 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -43,7 +43,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
@@ -51,6 +50,8 @@
#include <dt-bindings/gpio/gpio.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel SAMA5D4 family SoC";
compatible = "atmel,sama5d4";
interrupt-parent = <&aic>;
@@ -90,6 +91,7 @@
};
memory {
+ device_type = "memory";
reg = <0x20000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi
deleted file mode 100644
index 34eda68d9ea2..000000000000
--- a/arch/arm/boot/dts/skeleton.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This file is deprecated, and will be removed once existing users have been
- * updated. New dts{,i} files should *not* include skeleton.dtsi, and should
- * instead explicitly provide the below nodes only as required.
- *
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value. The bootloader will typically populate the memory
- * node.
- */
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- chosen { };
- aliases { };
- memory { device_type = "memory"; reg = <0 0>; };
-};
diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi
deleted file mode 100644
index 54e637752b9d..000000000000
--- a/arch/arm/boot/dts/skeleton64.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Skeleton device tree in the 64 bits version; the bare minimum
- * needed to boot; just include and add a compatible value. The
- * bootloader will typically populate the memory node.
- */
-
-/ {
- #address-cells = <2>;
- #size-cells = <2>;
- chosen { };
- aliases { };
- memory { device_type = "memory"; reg = <0 0 0 0>; };
-};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index dcb8fba3d709..ec1966480f2f 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -84,6 +84,7 @@
#dma-requests = <32>;
clocks = <&l4_main_clk>;
clock-names = "apb_pclk";
+ resets = <&rst DMA_RESET>;
};
};
@@ -100,6 +101,7 @@
reg = <0xffc00000 0x1000>;
interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
clocks = <&can0_clk>;
+ resets = <&rst CAN0_RESET>;
status = "disabled";
};
@@ -108,6 +110,7 @@
reg = <0xffc01000 0x1000>;
interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
clocks = <&can1_clk>;
+ resets = <&rst CAN1_RESET>;
status = "disabled";
};
@@ -585,6 +588,7 @@
compatible = "snps,dw-apb-gpio";
reg = <0xff708000 0x1000>;
clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO0_RESET>;
status = "disabled";
porta: gpio-controller@0 {
@@ -605,6 +609,7 @@
compatible = "snps,dw-apb-gpio";
reg = <0xff709000 0x1000>;
clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO1_RESET>;
status = "disabled";
portb: gpio-controller@0 {
@@ -625,6 +630,7 @@
compatible = "snps,dw-apb-gpio";
reg = <0xff70a000 0x1000>;
clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO2_RESET>;
status = "disabled";
portc: gpio-controller@0 {
@@ -735,6 +741,7 @@
#size-cells = <0>;
clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
+ resets = <&rst SDMMC_RESET>;
status = "disabled";
};
@@ -748,6 +755,7 @@
interrupts = <0x0 0x90 0x4>;
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
clock-names = "nand", "nand_x", "ecc";
+ resets = <&rst NAND_RESET>;
status = "disabled";
};
@@ -767,6 +775,7 @@
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
clocks = <&qspi_clk>;
+ resets = <&rst QSPI_RESET>;
status = "disabled";
};
@@ -785,6 +794,7 @@
sdr: sdr@ffc25000 {
compatible = "altr,sdr-ctl", "syscon";
reg = <0xffc25000 0x1000>;
+ resets = <&rst SDR_RESET>;
};
sdramedac {
@@ -801,6 +811,7 @@
interrupts = <0 154 4>;
num-cs = <4>;
clocks = <&spi_m_clk>;
+ resets = <&rst SPIM0_RESET>;
status = "disabled";
};
@@ -812,6 +823,7 @@
interrupts = <0 155 4>;
num-cs = <4>;
clocks = <&spi_m_clk>;
+ resets = <&rst SPIM1_RESET>;
status = "disabled";
};
@@ -878,6 +890,7 @@
dmas = <&pdma 28>,
<&pdma 29>;
dma-names = "tx", "rx";
+ resets = <&rst UART0_RESET>;
};
uart1: serial1@ffc03000 {
@@ -890,6 +903,7 @@
dmas = <&pdma 30>,
<&pdma 31>;
dma-names = "tx", "rx";
+ resets = <&rst UART1_RESET>;
};
usbphy0: usbphy {
@@ -929,6 +943,7 @@
reg = <0xffd02000 0x1000>;
interrupts = <0 171 4>;
clocks = <&osc1>;
+ resets = <&rst L4WD0_RESET>;
status = "disabled";
};
@@ -937,6 +952,7 @@
reg = <0xffd03000 0x1000>;
interrupts = <0 172 4>;
clocks = <&osc1>;
+ resets = <&rst L4WD1_RESET>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index e41fa23481c3..ae24599d5829 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -470,6 +470,7 @@
tx-fifo-depth = <4096>;
rx-fifo-depth = <16384>;
clocks = <&l4_mp_clk>;
+ resets = <&rst EMAC2_RESET>;
clock-names = "stmmaceth";
snps,axi-config = <&socfpga_axi_setup>;
status = "disabled";
@@ -480,6 +481,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02900 0x100>;
+ resets = <&rst GPIO0_RESET>;
status = "disabled";
porta: gpio-controller@0 {
@@ -499,6 +501,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02a00 0x100>;
+ resets = <&rst GPIO1_RESET>;
status = "disabled";
portb: gpio-controller@0 {
@@ -518,6 +521,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02b00 0x100>;
+ resets = <&rst GPIO2_RESET>;
status = "disabled";
portc: gpio-controller@0 {
@@ -548,6 +552,7 @@
reg = <0xffc02200 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
+ resets = <&rst I2C0_RESET>;
status = "disabled";
};
@@ -558,6 +563,7 @@
reg = <0xffc02300 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
+ resets = <&rst I2C1_RESET>;
status = "disabled";
};
@@ -568,6 +574,7 @@
reg = <0xffc02400 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
+ resets = <&rst I2C2_RESET>;
status = "disabled";
};
@@ -578,6 +585,7 @@
reg = <0xffc02500 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
+ resets = <&rst I2C3_RESET>;
status = "disabled";
};
@@ -588,6 +596,7 @@
reg = <0xffc02600 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sp_clk>;
+ resets = <&rst I2C4_RESET>;
status = "disabled";
};
@@ -600,6 +609,7 @@
num-cs = <4>;
/*32bit_access;*/
clocks = <&spi_m_clk>;
+ resets = <&rst SPIM0_RESET>;
status = "disabled";
};
@@ -614,6 +624,7 @@
tx-dma-channel = <&pdma 16>;
rx-dma-channel = <&pdma 17>;
clocks = <&spi_m_clk>;
+ resets = <&rst SPIM1_RESET>;
status = "disabled";
};
@@ -642,6 +653,7 @@
fifo-depth = <0x400>;
clocks = <&l4_mp_clk>, <&sdmmc_clk>;
clock-names = "biu", "ciu";
+ resets = <&rst SDMMC_RESET>;
status = "disabled";
};
@@ -655,6 +667,7 @@
interrupts = <0 99 4>;
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
clock-names = "nand", "nand_x", "ecc";
+ resets = <&rst NAND_RESET>;
status = "disabled";
};
@@ -739,6 +752,7 @@
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
clocks = <&qspi_clk>;
+ resets = <&rst QSPI_RESET>;
status = "disabled";
};
@@ -815,6 +829,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
+ resets = <&rst UART0_RESET>;
status = "disabled";
};
@@ -825,6 +840,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
+ resets = <&rst UART1_RESET>;
status = "disabled";
};
@@ -865,6 +881,7 @@
reg = <0xffd00200 0x100>;
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sys_free_clk>;
+ resets = <&rst L4WD0_RESET>;
status = "disabled";
};
@@ -873,6 +890,7 @@
reg = <0xffd00300 0x100>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sys_free_clk>;
+ resets = <&rst L4WD1_RESET>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
new file mode 100644
index 000000000000..f6561766d83f
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Chameleon96
+ *
+ * Copyright (c) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Novetech Chameleon96";
+ compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x20000000>; /* 512MB */
+ };
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led1 {
+ label = "green:user1";
+ gpios = <&porta 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "green:user2";
+ gpios = <&porta 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led3 {
+ label = "green:user3";
+ gpios = <&porta 25 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ user_led4 {
+ label = "green:user4";
+ gpios = <&portb 3 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ linux,default-trigger = "none";
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c0 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
+
+&i2c1 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&regulator_3_3v>;
+ vqmmc-supply = <&regulator_3_3v>;
+ status = "okay";
+};
+
+&spi0 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
+
+&spi1 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
+&uart0 {
+ /* On Low speed expansion */
+ label = "LS-UART1";
+ status = "okay";
+};
+
+&uart1 {
+ /* On Low speed expansion */
+ label = "LS-UART0";
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 086b4b333249..390df643a174 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -11,9 +11,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&gic>;
cpus {
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index 118135d75899..c47380763cae 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -11,9 +11,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&vic>;
cpus {
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index 00166eb9be86..0a634fb07452 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -9,9 +9,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "st,spear600";
cpus {
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 12afdc7467e7..04066f9cb8a3 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree for the ST-Ericsson Nomadik S8815 board
- * Produced by Calao Systems
+ * Device Tree for the ST Microelectronics Nomadik NHK8815 board
*/
/dts-v1/;
@@ -182,43 +181,12 @@
pinctrl-names = "default";
pinctrl-0 = <&clcd_24bit_mux>;
port {
- nomadik_clcd_pads: endpoint {
+ nomadik_clcd: endpoint {
remote-endpoint = <&nomadik_clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
};
};
- /*
- * WVGA connector 21
- * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
- * with TPO touch screen.
- */
- panel {
- compatible = "tpo,tpg110", "panel-dpi";
- grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
- scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
- backlight = <&bl>;
-
- port {
- nomadik_clcd_panel: endpoint {
- remote-endpoint = <&nomadik_clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <33200000>;
- hactive = <800>;
- hback-porch = <216>;
- hfront-porch = <40>;
- hsync-len = <1>;
- vactive = <480>;
- vback-porch = <35>;
- vfront-porch = <10>;
- vsync-len = <1>;
- };
- };
};
/* Activate RX/TX and CTS/RTS on UART 0 */
@@ -233,6 +201,55 @@
};
};
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * As we're dealing with 3wire SPI, we only define SCK
+ * and MOSI (in the spec MOSI is called "SDA").
+ */
+ gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ /*
+ * It's not actually active high, but the frameworks assume
+ * the polarity of the passed-in GPIO is "normal" (active
+ * high) then actively drives the line low to select the
+ * chip.
+ */
+ cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ /*
+ * WVGA connector 21
+ * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
+ * with TPO touch screen.
+ */
+ panel: display@0 {
+ /*
+ * The TPO display driver is connected to a
+ * 5.7" OSD OSD057VA01CT TFT display.
+ */
+ compatible = "tpo,tpg110";
+ reg = <0>;
+ spi-3wire;
+ /* 320 ns min period ~= 3 MHz */
+ spi-max-frequency = <3000000>;
+ /* Width and height from the OSD data sheet */
+ width-mm = <116>;
+ height-mm = <87>;
+ grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
+ backlight = <&bl>;
+
+ port {
+ nomadik_clcd_panel: endpoint {
+ remote-endpoint = <&nomadik_clcd>;
+ };
+ };
+ };
+ };
+
bl: backlight {
compatible = "pwm-backlight";
pwms = <&stmpe0_pwm 0 500000>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index fca76a696d9d..f78b4eabd68c 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -4,13 +4,13 @@
*/
#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
memory {
+ device_type = "memory";
reg = <0x00000000 0x04000000>,
<0x08000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 1bd1aba3322f..f4e7660fead7 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -4,7 +4,6 @@
*/
/dts-v1/;
-/include/ "skeleton.dtsi"
/ {
model = "ST-Ericsson U300";
@@ -22,6 +21,7 @@
};
memory {
+ device_type = "memory";
reg = <0x48000000 0x03c00000>;
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index ed7d7f46465e..73ea84df7bf4 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -61,6 +61,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 8c081eaf20fe..d90b0d1e18c7 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -55,6 +55,7 @@
};
memory {
+ device_type = "memory";
reg = <0xc0000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 5ceb2cf3777f..e19d0fe7dbda 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -60,6 +60,7 @@
};
memory {
+ device_type = "memory";
reg = <0x90000000 0x800000>;
};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8d6f028ae285..588b6ef94e93 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -45,12 +45,14 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
@@ -314,6 +316,26 @@
status = "disabled";
};
+ spi2: spi@40003800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f4-spi";
+ reg = <0x40003800 0x400>;
+ interrupts = <36>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>;
+ status = "disabled";
+ };
+
+ spi3: spi@40003c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f4-spi";
+ reg = <0x40003c00 0x400>;
+ interrupts = <51>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>;
+ status = "disabled";
+ };
+
usart2: serial@40004400 {
compatible = "st,stm32-uart";
reg = <0x40004400 0x400>;
@@ -523,6 +545,26 @@
status = "disabled";
};
+ spi1: spi@40013000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f4-spi";
+ reg = <0x40013000 0x400>;
+ interrupts = <35>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>;
+ status = "disabled";
+ };
+
+ spi4: spi@40013400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f4-spi";
+ reg = <0x40013400 0x400>;
+ interrupts = <84>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>;
+ status = "disabled";
+ };
+
syscfg: system-config@40013800 {
compatible = "syscon";
reg = <0x40013800 0x400>;
@@ -587,6 +629,26 @@
};
};
+ spi5: spi@40015000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f4-spi";
+ reg = <0x40015000 0x400>;
+ interrupts = <85>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+ status = "disabled";
+ };
+
+ spi6: spi@40015400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f4-spi";
+ reg = <0x40015400 0x400>;
+ interrupts = <86>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>;
+ status = "disabled";
+ };
+
pwrcfg: power-config@40007000 {
compatible = "syscon";
reg = <0x40007000 0x400>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 7937b43d7788..a3ff04940aec 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -61,6 +61,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x1000000>;
};
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index e3a7bd338d61..0ba9c5b08ab9 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -56,6 +56,7 @@
};
memory {
+ device_type = "memory";
reg = <0xC0000000 0x800000>;
};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index f48d06a80d1d..a25b7000a3a1 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -40,12 +40,14 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f7-rcc.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 483d896e2bc1..3c7216844a9b 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -56,6 +56,7 @@
};
memory {
+ device_type = "memory";
reg = <0xC0000000 0x1000000>;
};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index cbdd69ca9e7a..299af0723790 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -40,13 +40,15 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32h7-clks.h>
#include <dt-bindings/mfd/stm32h7-rcc.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 45e088c55741..f8040356fe2d 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -54,6 +54,7 @@
};
memory {
+ device_type = "memory";
reg = <0xd0000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 3f8e0c4a998d..ef34fa2f79ea 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -54,6 +54,7 @@
};
memory {
+ device_type = "memory";
reg = <0xd0000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index c4851271e810..9ec4694e93a7 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -246,6 +246,13 @@
};
};
+ m_can1_sleep_pins_a: m_can1-sleep@0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+ <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+ };
+ };
+
pwm2_pins_a: pwm2-0 {
pins {
pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index f77bea49c079..d66edb0c66cd 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -17,6 +17,7 @@
};
memory@c0000000 {
+ device_type = "memory";
reg = <0xC0000000 0x40000000>;
};
@@ -49,6 +50,10 @@
};
};
+&dts {
+ status = "okay";
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
@@ -72,6 +77,9 @@
&timers6 {
status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
timer@5 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 063ee8ac5dcb..b6aca40b9b90 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -124,8 +124,9 @@
};
&m_can1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&m_can1_pins_a>;
+ pinctrl-1 = <&m_can1_sleep_pins_a>;
status = "okay";
};
@@ -161,6 +162,9 @@
};
&timers2 {
+ /* spare dmas for other usage (un-delete to enable pwm capture) */
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm2_pins_a>;
@@ -173,6 +177,8 @@
};
&timers8 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm8_pins_a>;
@@ -185,6 +191,8 @@
};
&timers12 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm12_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 8bf1c17f8cef..f8bbfff5950b 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -84,6 +84,31 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&dts>;
+
+ trips {
+ cpu_alert1: cpu-alert1 {
+ temperature = <85000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ cpu-crit {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -98,6 +123,12 @@
reg = <0x40000000 0x400>;
clocks = <&rcc TIM2_K>;
clock-names = "int";
+ dmas = <&dmamux1 18 0x400 0x1>,
+ <&dmamux1 19 0x400 0x1>,
+ <&dmamux1 20 0x400 0x1>,
+ <&dmamux1 21 0x400 0x1>,
+ <&dmamux1 22 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up";
status = "disabled";
pwm {
@@ -119,6 +150,13 @@
reg = <0x40001000 0x400>;
clocks = <&rcc TIM3_K>;
clock-names = "int";
+ dmas = <&dmamux1 23 0x400 0x1>,
+ <&dmamux1 24 0x400 0x1>,
+ <&dmamux1 25 0x400 0x1>,
+ <&dmamux1 26 0x400 0x1>,
+ <&dmamux1 27 0x400 0x1>,
+ <&dmamux1 28 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
status = "disabled";
pwm {
@@ -140,6 +178,11 @@
reg = <0x40002000 0x400>;
clocks = <&rcc TIM4_K>;
clock-names = "int";
+ dmas = <&dmamux1 29 0x400 0x1>,
+ <&dmamux1 30 0x400 0x1>,
+ <&dmamux1 31 0x400 0x1>,
+ <&dmamux1 32 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4";
status = "disabled";
pwm {
@@ -161,6 +204,13 @@
reg = <0x40003000 0x400>;
clocks = <&rcc TIM5_K>;
clock-names = "int";
+ dmas = <&dmamux1 55 0x400 0x1>,
+ <&dmamux1 56 0x400 0x1>,
+ <&dmamux1 57 0x400 0x1>,
+ <&dmamux1 58 0x400 0x1>,
+ <&dmamux1 59 0x400 0x1>,
+ <&dmamux1 60 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
status = "disabled";
pwm {
@@ -182,6 +232,8 @@
reg = <0x40004000 0x400>;
clocks = <&rcc TIM6_K>;
clock-names = "int";
+ dmas = <&dmamux1 69 0x400 0x1>;
+ dma-names = "up";
status = "disabled";
timer@5 {
@@ -198,6 +250,8 @@
reg = <0x40005000 0x400>;
clocks = <&rcc TIM7_K>;
clock-names = "int";
+ dmas = <&dmamux1 70 0x400 0x1>;
+ dma-names = "up";
status = "disabled";
timer@6 {
@@ -465,6 +519,15 @@
reg = <0x44000000 0x400>;
clocks = <&rcc TIM1_K>;
clock-names = "int";
+ dmas = <&dmamux1 11 0x400 0x1>,
+ <&dmamux1 12 0x400 0x1>,
+ <&dmamux1 13 0x400 0x1>,
+ <&dmamux1 14 0x400 0x1>,
+ <&dmamux1 15 0x400 0x1>,
+ <&dmamux1 16 0x400 0x1>,
+ <&dmamux1 17 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
status = "disabled";
pwm {
@@ -486,6 +549,15 @@
reg = <0x44001000 0x400>;
clocks = <&rcc TIM8_K>;
clock-names = "int";
+ dmas = <&dmamux1 47 0x400 0x1>,
+ <&dmamux1 48 0x400 0x1>,
+ <&dmamux1 49 0x400 0x1>,
+ <&dmamux1 50 0x400 0x1>,
+ <&dmamux1 51 0x400 0x1>,
+ <&dmamux1 52 0x400 0x1>,
+ <&dmamux1 53 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
status = "disabled";
pwm {
@@ -543,6 +615,11 @@
reg = <0x44006000 0x400>;
clocks = <&rcc TIM15_K>;
clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
status = "disabled";
pwm {
@@ -564,6 +641,9 @@
reg = <0x44007000 0x400>;
clocks = <&rcc TIM16_K>;
clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
status = "disabled";
pwm {
@@ -584,6 +664,9 @@
reg = <0x44008000 0x400>;
clocks = <&rcc TIM17_K>;
clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
status = "disabled";
pwm {
@@ -684,14 +767,14 @@
m_can1: can@4400e000 {
compatible = "bosch,m_can";
- reg = <0x4400e000 0x400>, <0x44011000 0x2800>;
+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
reg-names = "m_can", "message_ram";
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
@@ -908,6 +991,16 @@
status = "disabled";
};
+ dts: thermal@50028000 {
+ compatible = "st,stm32-thermal";
+ reg = <0x50028000 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc TMPSENS>;
+ clock-names = "pclk";
+ #thermal-sensor-cells = <0>;
+ status = "disabled";
+ };
+
cryp1: cryp@54001000 {
compatible = "st,stm32mp1-cryp";
reg = <0x54001000 0x400>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 5d46bb0139fa..73c3ac42095f 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -184,6 +184,26 @@
status = "disabled";
};
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ default-pool {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -224,6 +244,19 @@
status = "disabled";
};
};
+
+ sram_c: sram@1d00000 {
+ compatible = "mmio-sram";
+ reg = <0x01d00000 0xd0000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x01d00000 0xd0000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x80000>;
+ };
+ };
};
dma: dma-controller@1c02000 {
@@ -394,6 +427,17 @@
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun4i-a10-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_VE>;
+ interrupts = <53>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c0f000 0x1000>;
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
index a89f29fa3e40..7257f39b31ce 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -49,14 +49,15 @@
compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
panel: panel {
- compatible = "urt,umsh-8596md-t", "simple-panel";
+ compatible = "bananapi,s070wv20-ct16", "simple-panel";
+ power-supply = <&reg_vcc3v3>;
+ enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
+ backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
- /* TODO: lcd panel uses axp gpio0 as enable pin */
- backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 6202aabedbfe..5b1f0e198eb6 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -54,7 +54,7 @@
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
- /* TODO: backlight uses axp gpio1 as enable pin */
+ enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
};
chosen {
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 556b1b591c5d..81bc85d398c1 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -191,6 +191,11 @@
};
&pio {
+ vcc-pa-supply = <&reg_vcc3v3>;
+ vcc-pc-supply = <&reg_vcc3v3>;
+ vcc-pe-supply = <&reg_vcc3v3>;
+ vcc-pf-supply = <&reg_vcc3v3>;
+ vcc-pg-supply = <&reg_vcc3v3>;
gpio-line-names =
/* PA */
"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index a9c123de5d2c..43fe215e83ea 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -68,6 +68,12 @@
};
};
+ de: display-engine {
+ /* compatible gets set in SoC specific dtsi file */
+ allwinner,pipelines = <&fe0>;
+ status = "disabled";
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -155,6 +161,55 @@
#dma-cells = <1>;
};
+ nfc: nand@1c03000 {
+ compatible = "allwinner,sun4i-a10-nand";
+ reg = <0x01c03000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_NAND>;
+ reset-names = "ahb";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ tcon0: lcd-controller@1c0c000 {
+ /* compatible gets set in SoC specific dtsi file */
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LCD>,
+ <&ccu CLK_LCD_CH0>;
+ clock-names = "ahb",
+ "tcon-ch0";
+ clock-output-names = "tcon-pixel-clock";
+ resets = <&ccu RST_BUS_LCD>;
+ reset-names = "lcd";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
@@ -214,21 +269,6 @@
#size-cells = <0>;
};
- nfc: nand@1c03000 {
- compatible = "allwinner,sun4i-a10-nand";
- reg = <0x01c03000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
- clock-names = "ahb", "mod";
- resets = <&ccu RST_BUS_NAND>;
- reset-names = "ahb";
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
usb_otg: usb@1c19000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c19000 0x0400>;
@@ -572,6 +612,111 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ fe0: display-frontend@1e00000 {
+ /* compatible gets set in SoC specific dtsi file */
+ reg = <0x01e00000 0x20000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+ <&ccu CLK_DRAM_DE_FE>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_BUS_DE_FE>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@1e60000 {
+ /* compatible gets set in SoC specific dtsi file */
+ reg = <0x01e60000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_DRAM_DE_BE>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_BUS_DE_BE>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_in_be0>;
+ };
+ };
+ };
+ };
+
+ drc0: drc@1e70000 {
+ /* compatible gets set in SoC specific dtsi file */
+ reg = <0x01e70000 0x10000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+ <&ccu CLK_DRAM_DRC>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_DRC>;
+
+ assigned-clocks = <&ccu CLK_DRC>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ drc0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_drc0>;
+ };
+ };
+
+ drc0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_drc0>;
+ };
+ };
+ };
+ };
+
rtc: rtc@1f00000 {
compatible = "allwinner,sun8i-a23-rtc";
reg = <0x01f00000 0x400>;
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
index b6958e8f2f01..d4dab7c28398 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -61,3 +61,7 @@
"Headset Mic", "HBIAS";
status = "okay";
};
+
+&panel {
+ compatible = "bananapi,s070wv20-ct16", "simple-panel";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index d00055e9eef5..a5e884a8b2ae 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -62,10 +62,26 @@
};
};
+&be0 {
+ compatible = "allwinner,sun8i-a23-display-backend";
+};
+
&ccu {
compatible = "allwinner,sun8i-a23-ccu";
};
+&de {
+ compatible = "allwinner,sun8i-a23-display-engine";
+};
+
+&drc0 {
+ compatible = "allwinner,sun8i-a23-drc";
+};
+
+&fe0 {
+ compatible = "allwinner,sun8i-a23-display-frontend";
+};
+
&pio {
compatible = "allwinner,sun8i-a23-pinctrl";
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -73,6 +89,10 @@
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
};
+&tcon0 {
+ compatible = "allwinner,sun8i-a23-tcon";
+};
+
&usb_otg {
compatible = "allwinner,sun6i-a31-musb";
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 626152c30f50..1111a6498102 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -159,12 +159,6 @@
};
};
- de: display-engine {
- compatible = "allwinner,sun8i-a33-display-engine";
- allwinner,pipelines = <&fe0>;
- status = "disabled";
- };
-
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&ths>;
@@ -209,47 +203,6 @@
};
soc {
- tcon0: lcd-controller@1c0c000 {
- compatible = "allwinner,sun8i-a33-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_LCD>,
- <&ccu CLK_LCD_CH0>;
- clock-names = "ahb",
- "tcon-ch0";
- clock-output-names = "tcon-pixel-clock";
- resets = <&ccu RST_BUS_LCD>;
- reset-names = "lcd";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- tcon0_in_drc0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&drc0_out_tcon0>;
- };
- };
-
- tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- tcon0_out_dsi: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&dsi_in_tcon0>;
- };
- };
- };
- };
-
video-codec@1c0e000 {
compatible = "allwinner,sun8i-a33-video-engine";
reg = <0x01c0e000 0x1000>;
@@ -339,115 +292,6 @@
status = "disabled";
#phy-cells = <0>;
};
-
- fe0: display-frontend@1e00000 {
- compatible = "allwinner,sun8i-a33-display-frontend";
- reg = <0x01e00000 0x20000>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
- <&ccu CLK_DRAM_DE_FE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_BUS_DE_FE>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- fe0_out_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_in_fe0>;
- };
- };
- };
- };
-
- be0: display-backend@1e60000 {
- compatible = "allwinner,sun8i-a33-display-backend";
- reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
- reg-names = "be", "sat";
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
- clock-names = "ahb", "mod",
- "ram", "sat";
- resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
- reset-names = "be", "sat";
- assigned-clocks = <&ccu CLK_DE_BE>;
- assigned-clock-rates = <300000000>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- be0_in_fe0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&fe0_out_be0>;
- };
- };
-
- be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- be0_out_drc0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&drc0_in_be0>;
- };
- };
- };
- };
-
- drc0: drc@1e70000 {
- compatible = "allwinner,sun8i-a33-drc";
- reg = <0x01e70000 0x10000>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
- <&ccu CLK_DRAM_DRC>;
- clock-names = "ahb", "mod", "ram";
- resets = <&ccu RST_BUS_DRC>;
-
- assigned-clocks = <&ccu CLK_DRC>;
- assigned-clock-rates = <300000000>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- drc0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- drc0_in_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_out_drc0>;
- };
- };
-
- drc0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- drc0_out_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_in_drc0>;
- };
- };
- };
- };
};
thermal-zones {
@@ -524,10 +368,37 @@
};
};
+&be0 {
+ compatible = "allwinner,sun8i-a33-display-backend";
+ /* A33 has an extra "SAT" module packed inside the display backend */
+ reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+ reg-names = "be", "sat";
+ clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+ clock-names = "ahb", "mod",
+ "ram", "sat";
+ resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+ reset-names = "be", "sat";
+ assigned-clocks = <&ccu CLK_DE_BE>;
+ assigned-clock-rates = <300000000>;
+};
+
&ccu {
compatible = "allwinner,sun8i-a33-ccu";
};
+&de {
+ compatible = "allwinner,sun8i-a33-display-engine";
+};
+
+&drc0 {
+ compatible = "allwinner,sun8i-a33-drc";
+};
+
+&fe0 {
+ compatible = "allwinner,sun8i-a33-display-frontend";
+};
+
&mali {
operating-points-v2 = <&mali_opp_table>;
};
@@ -544,6 +415,17 @@
};
+&tcon0 {
+ compatible = "allwinner,sun8i-a33-tcon";
+};
+
+&tcon0_out {
+ tcon0_out_dsi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_in_tcon0>;
+ };
+};
+
&usb_otg {
compatible = "allwinner,sun8i-a33-musb";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 1c012a4def16..9c006fc18821 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -154,6 +154,10 @@
#include "axp81x.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 7d30d3e530fb..838be7b3715f 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -237,6 +237,14 @@
#include "axp81x.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index a5a9f5a0603e..fcbec3d7ccd7 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -247,6 +247,14 @@
#include "axp81x.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 65cba1050802..4ec94d72f021 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -67,6 +67,21 @@
pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci1 {
@@ -94,6 +109,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 719ad769b837..53104f4ccacc 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -49,6 +49,26 @@
ethernet0 = &sdio_wifi;
};
+ panel: panel {
+ /* Tablet dts should provide panel compatible */
+ backlight = <&backlight>;
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ power-supply = <&reg_dc1sw>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_lcd>;
+ };
+ };
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
/*
@@ -64,6 +84,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -90,6 +114,19 @@
};
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_lcd: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+};
+
&usbphy {
usb1_vbus-supply = <&reg_dldo1>;
};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 438b7b44dab3..c488aaacbd68 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -102,6 +102,8 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ clocks = <&ccu CLK_OUTA>;
+ clock-names = "ext_clock";
};
};
@@ -196,6 +198,11 @@
status = "okay";
};
+&pio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_out_a_pin>;
+};
+
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <2500000>;
@@ -250,12 +257,27 @@
regulator-name = "vcc-wifi-io";
};
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
&reg_dldo2 {
+ regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
+&reg_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
&reg_dldo4 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
@@ -278,6 +300,25 @@
status = "okay";
};
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&ccu CLK_OUTA>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dldo2>;
+ vddio-supply = <&reg_dldo1>;
+ device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ /* TODO host wake line connected to PMIC GPIO pins */
+ shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+ max-speed = <1500000>;
+ };
+};
+
&usbphy {
usb1_vbus-supply = <&reg_vcc5v0>;
usb2_vbus-supply = <&reg_vcc5v0>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 89762dbefe42..06b685869f52 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -342,6 +342,11 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ clk_out_a_pin: clk-out-a-pin {
+ pins = "PI12";
+ function = "clk_out_a";
+ };
+
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
@@ -389,6 +394,16 @@
pins = "PB22", "PB23";
function = "uart0";
};
+
+ uart3_pg_pins: uart3-pg-pins {
+ pins = "PG6", "PG7";
+ function = "uart3";
+ };
+
+ uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+ pins = "PG8", "PG9";
+ function = "uart3";
+ };
};
wdt: watchdog@1c20c90 {
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 85da85faf869..28c034928d67 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -133,6 +133,19 @@
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <&reg_cldo1>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
@@ -183,10 +196,26 @@
clocks = <&ac100_rtc 0>;
};
+&pio {
+ vcc-pa-supply = <&reg_ldo_io1>;
+ vcc-pb-supply = <&reg_aldo2>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dc1sw>;
+ vcc-pe-supply = <&reg_eldo2>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_ldo_io0>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
&r_ir {
status = "okay";
};
+&r_pio {
+ vcc-pl-supply = <&reg_dldo2>;
+ vcc-pm-supply = <&reg_eldo3>;
+};
+
&r_rsb {
status = "okay";
@@ -217,6 +246,10 @@
/* unused */
};
+ reg_dc1sw: dc1sw {
+ regulator-name = "vcc-pd";
+ };
+
reg_dc5ldo: dc5ldo {
regulator-always-on;
regulator-min-microvolt = <800000>;
@@ -271,7 +304,6 @@
};
reg_dldo2: dldo2 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
@@ -290,14 +322,12 @@
};
reg_eldo3: eldo3 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
@@ -385,6 +415,14 @@
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * The PHY requires 20ms after all voltages
+ * are applied until core logic is ready and
+ * 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC
+ * ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
regulator-name = "vcc-gmac-phy";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 58a199b0e494..864715ec3cb0 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -120,6 +120,19 @@
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <&reg_cldo1>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -172,10 +185,26 @@
clocks = <&ac100_rtc 0>;
};
+&pio {
+ vcc-pa-supply = <&reg_ldo_io1>;
+ vcc-pb-supply = <&reg_aldo2>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_eldo2>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_ldo_io0>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
&r_ir {
status = "okay";
};
+&r_pio {
+ vcc-pl-supply = <&reg_dldo2>;
+ vcc-pm-supply = <&reg_eldo3>;
+};
+
&r_rsb {
status = "okay";
@@ -213,6 +242,10 @@
regulator-name = "vdd-cpus-09-usbh";
};
+ dc1sw {
+ /* unused */
+ };
+
reg_dcdc1: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
@@ -260,7 +293,6 @@
};
reg_dldo2: dldo2 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
@@ -279,14 +311,12 @@
};
reg_eldo3: eldo3 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
@@ -374,6 +404,14 @@
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * The PHY requires 20ms after all voltages
+ * are applied until core logic is ready and
+ * 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC
+ * ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
regulator-name = "vcc-gmac-phy";
};
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index d9532fb1ef65..6fb292e0b662 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -56,6 +56,10 @@
#size-cells = <2>;
interrupt-parent = <&gic>;
+ aliases {
+ ethernet0 = &gmac;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -183,6 +187,37 @@
clock-output-names = "osc32k";
};
+ /*
+ * The following two are dummy clocks, placeholders
+ * used in the gmac_tx clock. The gmac driver will
+ * choose one parent depending on the PHY interface
+ * mode, using clk_set_rate auto-reparenting.
+ *
+ * The actual TX clock rate is not controlled by the
+ * gmac_tx clock.
+ */
+ mii_phy_tx_clk: mii_phy_tx_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: gmac_int_tx_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@800030 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x00800030 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
+
cpus_clk: clk@8001410 {
compatible = "allwinner,sun9i-a80-cpus-clk";
reg = <0x08001410 0x4>;
@@ -283,6 +318,23 @@
};
};
+ gmac: ethernet@830000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x00830000 0x1054>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ resets = <&ccu RST_BUS_GMAC>;
+ reset-names = "stmmaceth";
+ snps,pbl = <2>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ehci0: usb@a00000 {
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a00000 0x100>;
@@ -948,6 +1000,19 @@
#size-cells = <0>;
#gpio-cells = <3>;
+ gmac_rgmii_pins: gmac-rgmii-pins {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA4", "PA5", "PA7", "PA8",
+ "PA9", "PA10", "PA12", "PA13",
+ "PA15", "PA16", "PA17";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ drive-strength = <40>;
+ };
+
i2c3_pins: i2c3-pins {
pins = "PG10", "PG11";
function = "i2c3";
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index b3283aeb5b7d..3bed375b9c03 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -103,6 +103,8 @@
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
};
@@ -215,7 +217,19 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- status = "okay";
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_vcc3v3>;
+ vddio-supply = <&reg_vcc3v3>;
+ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ };
};
&usb_otg {
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index a4c757c0b741..d74a6cbbfdf4 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -740,8 +740,7 @@
};
csi: camera@1cb0000 {
- compatible = "allwinner,sun8i-h3-csi",
- "allwinner,sun6i-a31-csi";
+ compatible = "allwinner,sun8i-h3-csi";
reg = <0x01cb0000 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CSI>,
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 1788556b4977..97a5c3504bbe 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1087,7 +1087,7 @@
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@0 {
- compatible = "winbond,w25q32dw";
+ compatible = "winbond,w25q32dw", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 9151b3ebb839..33bbb1c5285d 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1656,7 +1656,7 @@
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@0 {
- compatible = "winbond,w25q32dw";
+ compatible = "winbond,w25q32dw", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index bc85b6a166c7..a1acd872bcf2 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -370,7 +370,7 @@
spi-max-frequency = <25000000>;
flash@0 {
- compatible = "winbond,w25q32dw";
+ compatible = "winbond,w25q32dw", "jedec,spi-nor";
spi-max-frequency = <25000000>;
reg = <0>;
};
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 82d139648ef1..4882b61fb680 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -879,7 +879,7 @@
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@0 {
- compatible = "winbond,w25q32dw";
+ compatible = "winbond,w25q32dw", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 9eb26dc15f6b..3e5ac096d85e 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -287,7 +287,7 @@
status = "okay";
spi-max-frequency = <48000000>;
spi-flash@0 {
- compatible = "winbond,w25q80bl";
+ compatible = "winbond,w25q80bl", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <48000000>;
};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index b0d40ac8ac6e..a3b0f3555cd2 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1886,7 +1886,7 @@
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@1 {
- compatible = "winbond,w25q32";
+ compatible = "winbond,w25q32", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <20000000>;
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index fb9222b479d2..7ce61edd52f5 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -360,7 +360,7 @@
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@1 {
- compatible = "winbond,w25q32";
+ compatible = "winbond,w25q32", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <20000000>;
};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 6f4f60ba5429..269e6bf99ccb 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -1,6 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-/include/ "skeleton.dtsi"
/ {
model = "ARM Versatile AB";
@@ -21,6 +20,7 @@
};
memory {
+ device_type = "memory";
reg = <0x0 0x08000000>;
};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index a9569d15de41..d3963e9eaf48 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -133,7 +133,7 @@
mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
- interrupts = <9 10>;
+ interrupts = <9>, <10>;
cd-gpios = <&v2m_mmc_gpios 0 0>;
wp-gpios = <&v2m_mmc_gpios 1 0>;
max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index fd42e1194179..798c97aff7fa 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -133,7 +133,7 @@
mmci@5000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
- interrupts = <9 10>;
+ interrupts = <9>, <10>;
cd-gpios = <&v2m_mmc_gpios 0 0>;
wp-gpios = <&v2m_mmc_gpios 1 0>;
max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index a2ccacd07f4f..00cd9f5bef2e 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -42,6 +42,7 @@
cci-control-port = <&cci_control1>;
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <990>;
};
cpu1: cpu@1 {
@@ -51,6 +52,7 @@
cci-control-port = <&cci_control1>;
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <990>;
};
cpu2: cpu@2 {
@@ -60,6 +62,7 @@
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
capacity-dmips-mhz = <516>;
+ dynamic-power-coefficient = <133>;
};
cpu3: cpu@3 {
@@ -69,6 +72,7 @@
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
capacity-dmips-mhz = <516>;
+ dynamic-power-coefficient = <133>;
};
cpu4: cpu@4 {
@@ -78,6 +82,7 @@
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
capacity-dmips-mhz = <516>;
+ dynamic-power-coefficient = <133>;
};
idle-states {
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
index b08d561d6748..3fa0cbe456db 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -60,6 +60,29 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ spi-gpio {
+ compatible = "spi-gpio";
+ pinctrl-0 = <&pinctrl_gpio_spi>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* PTD12 ->RPIO[91] */
+ sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ /* PTD10 ->RPIO[89] */
+ miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ gpio@0 {
+ compatible = "pisosr-gpio";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* PTB18 -> RGPIO[40] */
+ load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <100000>;
+ };
+ };
};
&adc0 {
@@ -431,6 +454,14 @@
>;
};
+ pinctrl_gpio_spi: pinctrl-gpio-spi {
+ fsl,pins = <
+ VF610_PAD_PTB18__GPIO_40 0x1183
+ VF610_PAD_PTD10__GPIO_89 0x1183
+ VF610_PAD_PTD12__GPIO_91 0x1183
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
VF610_PAD_PTA22__I2C2_SCL 0x34df
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 7cdcc5fe8282..445c7dc306b2 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -207,7 +207,7 @@
};
&i2c0 {
- clock-frequency = <100000>;
+ clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
new file mode 100644
index 000000000000..2b10672fadbd
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB DTU board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * DTU - Digital Tapping Unit
+ *
+ * Copyright (C) 2015-2019 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SSMB DTU Board";
+ compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <1>;
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc0 {
+ vref-supply = <&reg_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <&reg_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ eeprom-length = <65536>;
+ reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_100_3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "eth_cu_1000_2";
+ phy-handle = <&phy9>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+
+ mdio1 {
+ compatible = "marvell,mv88e6xxx-mdio-external";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy9: phy9@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ pinctrl-0 = <&pinctrl_gpio_phy9>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio2>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ gpio6: gpio-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* On SSMB */
+ temperature-sensor@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ /* On DSB */
+ temperature-sensor@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ label = "nameplate";
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+ fsl,pins = <
+ VF610_PAD_PTB24__GPIO_94 0x219d
+ >;
+ };
+
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTE2__GPIO_107 0x31c2
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 757af56e8ee7..0d9fe5ac83a3 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -99,6 +99,8 @@
non-removable;
no-1-8-v;
keep-power-in-suspend;
+ no-sdio;
+ no-sd;
status = "okay";
};
@@ -106,6 +108,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ no-sdio;
status = "okay";
};
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index 1929ad390d88..8b5af039b072 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -6,9 +6,9 @@
* Licensed under GPLv2 or later
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "via,vt8500";
cpus {
@@ -21,6 +21,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
aliases {
serial0 = &uart0;
serial1 = &uart1;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e9ef539e13d3..cca6747304c4 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -6,9 +6,9 @@
* Licensed under GPLv2 or later
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "wm,wm8505";
cpus {
@@ -21,6 +21,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
aliases {
serial0 = &uart0;
serial1 = &uart1;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index e12213d16693..00d01769a68f 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -6,9 +6,9 @@
* Licensed under GPLv2 or later
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "wm,wm8650";
cpus {
@@ -21,6 +21,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
aliases {
serial0 = &uart0;
serial1 = &uart1;
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
index 46d076d7302b..54d8f7d9bb33 100644
--- a/arch/arm/boot/dts/wm8750.dtsi
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -6,9 +6,9 @@
* Licensed under GPLv2 or later
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "wm,wm8750";
cpus {
@@ -21,6 +21,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
aliases {
serial0 = &uart0;
serial1 = &uart1;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index 8fbccfbe75f3..c572d777077f 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -6,9 +6,9 @@
* Licensed under GPLv2 or later
*/
-/include/ "skeleton.dtsi"
-
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "wm,wm8850";
cpus {
@@ -22,6 +22,11 @@
};
};
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
aliases {
serial0 = &uart0;
serial1 = &uart1;
diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts
index eedd3fcbc002..bd9400840023 100644
--- a/arch/arm/boot/dts/zx296702-ad1.dts
+++ b/arch/arm/boot/dts/zx296702-ad1.dts
@@ -14,6 +14,7 @@
};
memory {
+ device_type = "memory";
reg = <0x50000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
index 240e7a23d81f..afd98de029be 100644
--- a/arch/arm/boot/dts/zx296702.dtsi
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -1,10 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
#include <dt-bindings/clock/zx296702-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts
index b38704657960..5ec616ebca08 100644
--- a/arch/arm/boot/dts/zynq-zturn.dts
+++ b/arch/arm/boot/dts/zynq-zturn.dts
@@ -54,7 +54,7 @@
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};