ARM: mmp: remove all board files

The old-style board files were marked as 'unused' a while ago
and can now be removed for good, leaving only devicetree based
boot support.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 185 deletions

diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
deleted file mode 100644
index 2578e176fd48..000000000000
--- a/arch/arm/mach-mmp/jasper.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/jasper.c
- *
- *  Support for the Marvell Jasper Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/mfd/max8925.h>
-#include <linux/interrupt.h>
-
-#include "irqs.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-
-#include "common.h"
-
-#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
-
-static unsigned long jasper_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC1 */
-	GPIO131_MMC1_DAT3,
-	GPIO132_MMC1_DAT2,
-	GPIO133_MMC1_DAT1,
-	GPIO134_MMC1_DAT0,
-	GPIO136_MMC1_CMD,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD,
-	GPIO141_MMC1_WP,
-
-	/* MMC2 */
-	GPIO37_MMC2_DAT3,
-	GPIO38_MMC2_DAT2,
-	GPIO39_MMC2_DAT1,
-	GPIO40_MMC2_DAT0,
-	GPIO41_MMC2_CMD,
-	GPIO42_MMC2_CLK,
-
-	/* MMC3 */
-	GPIO165_MMC3_DAT7,
-	GPIO162_MMC3_DAT6,
-	GPIO166_MMC3_DAT5,
-	GPIO163_MMC3_DAT4,
-	GPIO167_MMC3_DAT3,
-	GPIO164_MMC3_DAT2,
-	GPIO168_MMC3_DAT1,
-	GPIO111_MMC3_DAT0,
-	GPIO112_MMC3_CMD,
-	GPIO151_MMC3_CLK,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data jasper_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct max8925_backlight_pdata jasper_backlight_data = {
-	.dual_string	= 0,
-};
-
-static struct max8925_power_pdata jasper_power_data = {
-	.batt_detect		= 0,	/* can't detect battery by ID pin */
-	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
-	.fast_charge		= MAX8925_FCHG_1000MA,
-};
-
-static struct max8925_platform_data jasper_max8925_info = {
-	.backlight		= &jasper_backlight_data,
-	.power			= &jasper_power_data,
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info jasper_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &jasper_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &jasper_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static void __init jasper_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= JASPER_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = jasper_init,
-	.restart	= mmp_restart,
-MACHINE_END