diff options
| author | Tero Kristo <t-kristo@ti.com> | 2014-02-26 17:30:43 +0200 |
|---|---|---|
| committer | Tero Kristo <t-kristo@ti.com> | 2014-07-04 17:02:17 +0300 |
| commit | c5180a2b3e26d9b82277986f830c89a50103e65a (patch) | |
| tree | b7c7ca7ac908337b88e6048766b4244c431cb995 /arch/arm/mach-omap2/prm3xxx.c | |
| parent | 6bdc4b44b3acc95655b061a88c951c6d9742d8e3 (diff) | |
ARM: OMAP3: PRM: move PRM init code from PM core to the driver
Helps to isolate the PRM driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Diffstat (limited to 'arch/arm/mach-omap2/prm3xxx.c')
| -rw-r--r-- | arch/arm/mach-omap2/prm3xxx.c | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 4d93b844bcc4..48218a450cb0 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -275,6 +275,96 @@ void __init omap3_prm_reset_modem(void) } /** + * omap3_prm_init_pm - initialize PM related registers for PRM + * @has_uart4: SoC has UART4 + * @has_iva: SoC has IVA + * + * Initializes PRM registers for PM use. Called from PM init. + */ +void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) +{ + u32 en_uart4_mask; + u32 grpsel_uart4_mask; + + /* + * Enable control of expternal oscillator through + * sys_clkreq. In the long run clock framework should + * take care of this. + */ + omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, + 1 << OMAP_AUTOEXTCLKMODE_SHIFT, + OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + + /* setup wakup source */ + omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK | + OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK, + WKUP_MOD, PM_WKEN); + /* No need to write EN_IO, that is always enabled */ + omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK | + OMAP3430_GRPSEL_GPT1_MASK | + OMAP3430_GRPSEL_GPT12_MASK, + WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + + /* Enable PM_WKEN to support DSS LPR */ + omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK, + OMAP3430_DSS_MOD, PM_WKEN); + + if (has_uart4) { + en_uart4_mask = OMAP3630_EN_UART4_MASK; + grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK; + } + + /* Enable wakeups in PER */ + omap2_prm_write_mod_reg(en_uart4_mask | + OMAP3430_EN_GPIO2_MASK | + OMAP3430_EN_GPIO3_MASK | + OMAP3430_EN_GPIO4_MASK | + OMAP3430_EN_GPIO5_MASK | + OMAP3430_EN_GPIO6_MASK | + OMAP3430_EN_UART3_MASK | + OMAP3430_EN_MCBSP2_MASK | + OMAP3430_EN_MCBSP3_MASK | + OMAP3430_EN_MCBSP4_MASK, + OMAP3430_PER_MOD, PM_WKEN); + + /* and allow them to wake up MPU */ + omap2_prm_write_mod_reg(grpsel_uart4_mask | + OMAP3430_GRPSEL_GPIO2_MASK | + OMAP3430_GRPSEL_GPIO3_MASK | + OMAP3430_GRPSEL_GPIO4_MASK | + OMAP3430_GRPSEL_GPIO5_MASK | + OMAP3430_GRPSEL_GPIO6_MASK | + OMAP3430_GRPSEL_UART3_MASK | + OMAP3430_GRPSEL_MCBSP2_MASK | + OMAP3430_GRPSEL_MCBSP3_MASK | + OMAP3430_GRPSEL_MCBSP4_MASK, + OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); + + /* Don't attach IVA interrupts */ + if (has_iva) { + omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + } + + /* Clear any pending 'reset' flags */ + omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, + OMAP2_RM_RSTST); + + /* Clear any pending PRCM interrupts */ + omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); +} + +/** * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain * * Clear any previously-latched I/O wakeup events and ensure that the |