Merge tag 'omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/headers

From Tony Lindgren <tony@atomide.com>:

These changes deal with the issues of relative includes
introduced by the earlier clean-up and clean up few more
things for enabling multiplatform support.

The multiplatform kernel has been booted on omaps on
top of this branch with the work-in-progress patches
applied manually.

We cannot yet enable the multiplatform support though.
We still need the common clock framework patches, some
solution for dma-omap.h, and serial-omap.h moved before
we can enable it.

* tag 'omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ARM: OMAP2+: Fix relative includes for serial.h
  ARM: OMAP: Fix relative includes for fpga.h
  ARM: OMAP1: Remove relative includes
  ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.c
  ARM: OMAP: Fix relative includes for debug-devices.h
  ARM: OMAP: Remove plat-omap/common.h
  ARM: OMAP: Move omap-pm-noop.c local to mach-omap2
  ARM: OMAP: Fix relative includes for shared i2c.h file
  ARM: OMAP: Make plat-omap/i2c.c port checks local
  ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2
  ARM: OMAP: Move omap1 specific code to local sram.c
  ARM: OMAP: Introduce common omap_map_sram() and omap_sram_reset()
  ARM: OMAP: Split sram.h to local headers and minimal shared header
  ARM: OMAP1: usb: fix sparse warnings

Conflicts:
	arch/arm/mach-omap2/cm33xx.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

34 files changed, 906 insertions, 176 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ae87a3ea53ae..c94d495b8d95 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
-	 omap_device.o
+	 omap_device.o sram.o
 
 omap-2-3-common				= irq.o
 hwmod-common				= omap_hwmod.o \
@@ -75,6 +75,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+obj-$(CONFIG_OMAP_PM_NOOP)		+= omap-pm-noop.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
 obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 3fc6d839fb3a..d1c01625fe5a 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -28,7 +28,6 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index cf9449bde186..a8cad2237a2a 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -44,8 +44,6 @@
 #include <video/omap-panel-tfp410.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/hardware.h>
-
 #include "common.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index bd11b0aa9495..8668c72ee810 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 
 #include <plat-omap/dma-omap.h>
-#include "debug-devices.h"
+#include <plat/debug-devices.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 3432f913f743..0d2f14c2dcce 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -25,14 +25,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include "../plat-omap/sram.h"
-
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "sram.h"
 
 /* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
 
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index c66276b2bf0a..a38ebb209721 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,8 +33,6 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 
-#include "../plat-omap/sram.h"
-
 #include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
@@ -42,6 +40,7 @@
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "sram.h"
 
 const struct prcm_config *curr_prcm_set;
 const struct prcm_config *rate_table;
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 5510d92abe6e..6cf298e262f6 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -21,12 +21,11 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include "../plat-omap/sram.h"
-
 #include "clock.h"
 #include "clock3xxx.h"
 #include "clock34xx.h"
 #include "sdrc.h"
+#include "sram.h"
 
 #define CYCLES_PER_MHZ			1000000
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index b2dfcd777194..058ce3c0873e 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -22,8 +22,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "../plat-omap/common.h"
-
 #include "clockdomain.h"
 #include "cm.h"
 #include "cm33xx.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index c925c805969f..426fcfcfd821 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -34,8 +34,6 @@
 
 #include <asm/proc-fns.h>
 
-#include "../plat-omap/common.h"
-
 #include "i2c.h"
 #include "serial.h"
 
@@ -345,5 +343,8 @@ struct omap2_hsmmc_info;
 extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
 extern void omap_reserve(void);
 
+struct omap_hwmod;
+extern int omap_dss_reset(struct omap_hwmod *);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h
deleted file mode 100644
index a4edbd2f7484..000000000000
--- a/arch/arm/mach-omap2/debug-devices.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _OMAP_DEBUG_DEVICES_H
-#define _OMAP_DEBUG_DEVICES_H
-
-#include <linux/types.h>
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index b1926cd70468..e5aba58da5d2 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -276,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 		return -ENOMEM;
 	}
 
+	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+		d->dev_caps |= HS_CHANNELS_RESERVED;
+
 	/* Check the capabilities register for descriptor loading feature */
 	if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
 		dma_common_ch_end = CCDN;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index e3406dce59be..4a964338992a 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,7 +14,6 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <mach/hardware.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index ad55b943108f..4e63097e3cd8 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -109,6 +109,19 @@ int omap_i2c_reset(struct omap_hwmod *oh)
 	return 0;
 }
 
+static int __init omap_i2c_nr_ports(void)
+{
+	int ports = 0;
+
+	if (cpu_is_omap24xx())
+		ports = 2;
+	else if (cpu_is_omap34xx())
+		ports = 3;
+	else if (cpu_is_omap44xx())
+		ports = 4;
+	return ports;
+}
+
 static const char name[] = "omap_i2c";
 
 int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
@@ -121,6 +134,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
 	struct omap_i2c_bus_platform_data *pdata;
 	struct omap_i2c_dev_attr *dev_attr;
 
+	if (bus_id > omap_i2c_nr_ports())
+		return -EINVAL;
+
 	omap2_i2c_mux_pins(bus_id);
 
 	l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h
index 81dbb992a6bc..42b6f2e7d190 100644
--- a/arch/arm/mach-omap2/i2c.h
+++ b/arch/arm/mach-omap2/i2c.h
@@ -19,7 +19,7 @@
  *
  */
 
-#include "../plat-omap/i2c.h"
+#include <plat/i2c.h>
 
 #ifndef __MACH_OMAP2_I2C_H
 #define __MACH_OMAP2_I2C_H
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 4b5cbdfac028..cfaed13d0040 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include <linux/serial_reg.h>
 
-#include <../mach-omap2/serial.h>
+#include <mach/serial.h>
 
 #define UART_OFFSET(addr)	((addr) & 0x00ffffff)
 
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
deleted file mode 100644
index 5621cc59c9f4..000000000000
--- a/arch/arm/mach-omap2/include/mach/gpio.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/gpio.h
- */
diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
new file mode 100644
index 000000000000..70eda00db7a4
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/serial.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS	0x3ffc
+
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE	0x4806a000
+#define OMAP2_UART2_BASE	0x4806c000
+#define OMAP2_UART3_BASE	0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE	0x49020000
+#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE	0x48020000
+#define OMAP4_UART4_BASE	0x4806e000
+
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE	0x48020000
+#define TI81XX_UART2_BASE	0x48022000
+#define TI81XX_UART3_BASE	0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
+
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE	0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE	0x48066000
+#define OMAP5_UART6_BASE	0x48068000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfa400000
+
+#define OMAP_PORT_SHIFT		2
+#define ZOOM_PORT_SHIFT		1
+
+#define OMAP24XX_BASE_BAUD	(48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP2UART1		21
+#define OMAP2UART2		22
+#define OMAP2UART3		23
+#define OMAP3UART1		OMAP2UART1
+#define OMAP3UART2		OMAP2UART2
+#define OMAP3UART3		33
+#define OMAP3UART4		34		/* Only on 36xx */
+#define OMAP4UART1		OMAP2UART1
+#define OMAP4UART2		OMAP2UART2
+#define OMAP4UART3		43
+#define OMAP4UART4		44
+#define TI81XXUART1		81
+#define TI81XXUART2		82
+#define TI81XXUART3		83
+#define AM33XXUART1		84
+#define OMAP5UART3		OMAP4UART3
+#define OMAP5UART4		OMAP4UART4
+#define ZOOM_UART		95		/* Only on zoom2/3 */
+
+#ifndef __ASSEMBLER__
+
+struct omap_board_data;
+struct omap_uart_port_info;
+
+extern void omap_serial_init(void);
+extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
+extern void omap_serial_init_port(struct omap_board_data *bdata,
+		struct omap_uart_port_info *platform_data);
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 28d1ec0e869a..8e3546d3e041 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -23,7 +23,7 @@
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 
-#include <../mach-omap2/serial.h>
+#include <mach/serial.h>
 
 #define MDR1_MODE_MASK			0x07
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4fadc7895579..807b8d919f81 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -27,8 +27,6 @@
 
 #include <plat-omap/dma-omap.h>
 
-#include "../plat-omap/sram.h"
-
 #include "omap_hwmod.h"
 #include "soc.h"
 #include "iomap.h"
@@ -43,6 +41,7 @@
 #include "omap-pm.h"
 #include "sdrc.h"
 #include "serial.h"
+#include "sram.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -354,11 +353,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
-static void __init omap_common_init_early(void)
-{
-	omap_init_consistent_dma_size();
-}
-
 static void __init omap_hwmod_init_postsetup(void)
 {
 	u8 postsetup_state;
@@ -379,7 +373,6 @@ void __init omap2420_init_early(void)
 {
 	omap2_set_globals_242x();
 	omap2xxx_check_revision();
-	omap_common_init_early();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
 	omap242x_clockdomains_init();
@@ -401,7 +394,6 @@ void __init omap2430_init_early(void)
 {
 	omap2_set_globals_243x();
 	omap2xxx_check_revision();
-	omap_common_init_early();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
 	omap243x_clockdomains_init();
@@ -428,7 +420,6 @@ void __init omap3_init_early(void)
 	omap2_set_globals_3xxx();
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
-	omap_common_init_early();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	omap3xxx_clockdomains_init();
@@ -462,7 +453,6 @@ void __init ti81xx_init_early(void)
 	omap2_set_globals_ti81xx();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
-	omap_common_init_early();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	omap3xxx_clockdomains_init();
@@ -520,7 +510,6 @@ void __init am33xx_init_early(void)
 	omap2_set_globals_am33xx();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
-	omap_common_init_early();
 	am33xx_voltagedomains_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
@@ -536,7 +525,6 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_443x();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
-	omap_common_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
 	omap44xx_clockdomains_init();
@@ -558,7 +546,6 @@ void __init omap5_init_early(void)
 {
 	omap2_set_globals_5xxx();
 	omap5xxx_check_revision();
-	omap_common_init_early();
 }
 #endif
 
diff --git a/arch/arm/mach-omap2/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c
new file mode 100644
index 000000000000..6a3be2bebddb
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-pm-noop.c
@@ -0,0 +1,371 @@
+/*
+ * omap-pm-noop.c - OMAP power management interface - dummy version
+ *
+ * This code implements the OMAP power management interface to
+ * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
+ * debug/demonstration use, as it does nothing but printk() whenever a
+ * function is called (when DEBUG is defined, below)
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order):
+ * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
+ * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include "omap_device.h"
+#include "omap-pm.h"
+
+static bool off_mode_enabled;
+static int dummy_context_loss_counter;
+
+/*
+ * Device-driver-originated constraints (via board-*.c files)
+ */
+
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
+	}
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
+			 dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
+			 dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the MPU to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on the MPU and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+
+	return 0;
+}
+
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+{
+	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
+	    agent_id != OCP_TARGET_AGENT)) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
+	}
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
+			 dev_name(dev), agent_id);
+	else
+		pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
+			 dev_name(dev), agent_id, r);
+
+	/*
+	 * This code should model the interconnect and compute the
+	 * required clock frequency, convert that to a VDD2 OPP ID, then
+	 * set the VDD2 OPP appropriately.
+	 *
+	 * TI CDP code can call constraint_set here on the VDD2 OPP.
+	 */
+
+	return 0;
+}
+
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+				   long t)
+{
+	if (!req_dev || !dev || t < -1) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
+	}
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
+			 dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n",
+			 dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the device to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on that powerdomain and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.  Conceivably, this code should also determine
+	 * whether to actually disable the device clocks or not,
+	 * depending on how long it takes to re-enable the clocks.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+
+	return 0;
+}
+
+int omap_pm_set_max_sdma_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
+	}
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
+			 dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n",
+			 dev_name(dev), t);
+
+	/*
+	 * For current Linux PM QOS params, this code should scan the
+	 * list of maximum CPU and DMA latencies and select the
+	 * smallest, then set cpu_dma_latency pm_qos_param
+	 * accordingly.
+	 *
+	 * For future Linux PM QOS params, with separate CPU and DMA
+	 * latency params, this code should just set the dma_latency param.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+
+	return 0;
+}
+
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
+{
+	if (!dev || !c || r < 0) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
+	}
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n",
+			 dev_name(dev));
+	else
+		pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n",
+			 dev_name(dev), r);
+
+	/*
+	 * Code in a real implementation should keep track of these
+	 * constraints on the clock, and determine the highest minimum
+	 * clock rate.  It should iterate over each OPP and determine
+	 * whether the OPP will result in a clock rate that would
+	 * satisfy this constraint (and any other PM constraint in effect
+	 * at that time).  Once it finds the lowest-voltage OPP that
+	 * meets those conditions, it should switch to it, or return
+	 * an error if the code is not capable of doing so.
+	 */
+
+	return 0;
+}
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+const struct omap_opp *omap_pm_dsp_get_opp_table(void)
+{
+	pr_debug("OMAP PM: DSP request for OPP table\n");
+
+	/*
+	 * Return DSP frequency table here:  The final item in the
+	 * array should have .rate = .opp_id = 0.
+	 */
+
+	return NULL;
+}
+
+void omap_pm_dsp_set_min_opp(u8 opp_id)
+{
+	if (opp_id == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
+
+	/*
+	 *
+	 * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
+	 * can just test to see which is higher, the CPU's desired OPP
+	 * ID or the DSP's desired OPP ID, and use whichever is
+	 * highest.
+	 *
+	 * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
+	 * rate is keyed on MPU speed, not the OPP ID.  So we need to
+	 * map the OPP ID to the MPU speed for use with clk_set_rate()
+	 * if it is higher than the current OPP clock rate.
+	 *
+	 */
+}
+
+
+u8 omap_pm_dsp_get_opp(void)
+{
+	pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
+
+	/*
+	 * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
+	 *
+	 * CDP12.14+:
+	 * Call clk_get_rate() on the OPP custom clock, map that to an
+	 * OPP ID using the tables defined in board-*.c/chip-*.c files.
+	 */
+
+	return 0;
+}
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
+{
+	pr_debug("OMAP PM: CPUFreq request for frequency table\n");
+
+	/*
+	 * Return CPUFreq frequency table here: loop over
+	 * all VDD1 clkrates, pull out the mpu_ck frequencies, build
+	 * table
+	 */
+
+	return NULL;
+}
+
+void omap_pm_cpu_set_freq(unsigned long f)
+{
+	if (f == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
+		 f);
+
+	/*
+	 * For l-o dev tree, determine whether MPU freq or DSP OPP id
+	 * freq is higher.  Find the OPP ID corresponding to the
+	 * higher frequency.  Call clk_round_rate() and clk_set_rate()
+	 * on the OPP custom clock.
+	 *
+	 * CDP should just be able to set the VDD1 OPP clock rate here.
+	 */
+}
+
+unsigned long omap_pm_cpu_get_freq(void)
+{
+	pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
+
+	/*
+	 * Call clk_get_rate() on the mpu_ck.
+	 */
+
+	return 0;
+}
+
+/**
+ * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled
+ *
+ * Intended for use only by OMAP PM core code to notify this layer
+ * that off mode has been enabled.
+ */
+void omap_pm_enable_off_mode(void)
+{
+	off_mode_enabled = true;
+}
+
+/**
+ * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled
+ *
+ * Intended for use only by OMAP PM core code to notify this layer
+ * that off mode has been disabled.
+ */
+void omap_pm_disable_off_mode(void)
+{
+	off_mode_enabled = false;
+}
+
+/*
+ * Device context loss tracking
+ */
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int count;
+
+	if (WARN_ON(!dev))
+		return -ENODEV;
+
+	if (dev->pm_domain == &omap_device_pm_domain) {
+		count = omap_device_get_context_loss_count(pdev);
+	} else {
+		WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
+			  dev_name(dev));
+
+		count = dummy_context_loss_counter;
+
+		if (off_mode_enabled) {
+			count++;
+			/*
+			 * Context loss count has to be a non-negative value.
+			 * Clear the sign bit to get a value range from 0 to
+			 * INT_MAX.
+			 */
+			count &= INT_MAX;
+			dummy_context_loss_counter = count;
+		}
+	}
+
+	pr_debug("OMAP PM: context loss count for dev %s = %d\n",
+		 dev_name(dev), count);
+
+	return count;
+}
+
+#else
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+	return dummy_context_loss_counter;
+}
+
+#endif
+
+/* Should be called before clk framework init */
+int __init omap_pm_if_early_init(void)
+{
+	return 0;
+}
+
+/* Must be called after clock framework is initialized */
+int __init omap_pm_if_init(void)
+{
+	return 0;
+}
+
+void omap_pm_if_exit(void)
+{
+	/* Deallocate CPUFreq frequency table here */
+}
+
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index d25845c471da..3cfcd41bf8fa 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -25,8 +25,6 @@
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
 
-#include "../plat-omap/sram.h"
-
 #include "omap-wakeupgen.h"
 #include "soc.h"
 #include "common.h"
@@ -34,6 +32,7 @@
 #include "hsmmc.h"
 #include "omap4-sar-layout.h"
 #include "omap-secure.h"
+#include "sram.h"
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 05c6a5906550..40d6c93d9853 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -12,8 +12,6 @@
 
 #include <plat-omap/dma-omap.h>
 
-#include "../plat-omap/common.h"
-
 #include "omap_hwmod.h"
 #include "hdq1w.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 5b9be734709c..7a6132848f5d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,8 +30,6 @@
 #include <plat/dmtimer.h>
 #include <plat/iommu.h>
 
-#include "../plat-omap/common.h"
-
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm1_44xx.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 83815ddc4786..13e1f4303989 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -31,6 +31,8 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
+#include <asm/fncpy.h>
+
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
@@ -38,8 +40,6 @@
 
 #include <plat-omap/dma-omap.h>
 
-#include "../plat-omap/sram.h"
-
 #include "soc.h"
 #include "common.h"
 #include "clock.h"
@@ -48,6 +48,7 @@
 #include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "sram.h"
 #include "pm.h"
 #include "control.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2f1ad87c1bb0..b16caea312ed 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -32,6 +32,7 @@
 
 #include <trace/events/power.h>
 
+#include <asm/fncpy.h>
 #include <asm/suspend.h>
 #include <asm/system_misc.h>
 
@@ -40,8 +41,6 @@
 #include <plat/prcm.h>
 #include <plat-omap/dma-omap.h>
 
-#include "../plat-omap/sram.h"
-
 #include "soc.h"
 #include "common.h"
 #include "cm3xxx.h"
@@ -51,6 +50,7 @@
 #include "prm3xxx.h"
 #include "pm.h"
 #include "sdrc.h"
+#include "sram.h"
 #include "control.h"
 
 /* pm34xx errata defined in pm.h */
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 53ec9cbaa3d3..1ac73883f891 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -19,8 +19,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "../plat-omap/common.h"
-
 #include "common.h"
 #include "powerdomain.h"
 #include "prm33xx.h"
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 6c595798c5c5..945b4ad6ab84 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
-#include "../plat-omap/common.h"
 #include <plat/prcm.h>
 
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 94d4082f87ed..c64ee1904be8 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,8 +23,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include "../plat-omap/sram.h"
-
 #include "common.h"
 #include "clock.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 26c1728e09ca..907291714643 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,14 +24,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include "../plat-omap/sram.h"
-
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "prm2xxx.h"
 #include "clock.h"
 #include "sdrc.h"
+#include "sram.h"
 
 /* Memory timing, DLL mode flags */
 #define M_DDR		1
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
index 6a6806271fcf..c4014f013df0 100644
--- a/arch/arm/mach-omap2/serial.h
+++ b/arch/arm/mach-omap2/serial.h
@@ -1,112 +1 @@
-/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
-/*
- * Memory entry used for the DEBUG_LL UART configuration, relative to
- * start of RAM. See also uncompress.h and debug-macro.S.
- *
- * Note that using a memory location for storing the UART configuration
- * has at least two limitations:
- *
- * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
- *    uncompress code could then partially overwrite itself
- * 2. We assume printascii is called at least once before paging_init,
- *    and addruart has a chance to read OMAP_UART_INFO
- */
-#define OMAP_UART_INFO_OFS	0x3ffc
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE	0x4806a000
-#define OMAP2_UART2_BASE	0x4806c000
-#define OMAP2_UART3_BASE	0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE	0x49020000
-#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE	0x48020000
-#define OMAP4_UART4_BASE	0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE	0x48020000
-#define TI81XX_UART2_BASE	0x48022000
-#define TI81XX_UART3_BASE	0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE	0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE	0x48066000
-#define OMAP5_UART6_BASE	0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfa400000
-
-#define OMAP_PORT_SHIFT		2
-#define ZOOM_PORT_SHIFT		1
-
-#define OMAP24XX_BASE_BAUD	(48000000/16)
-
-/*
- * DEBUG_LL port encoding stored into the UART1 scratchpad register by
- * decomp_setup in uncompress.h
- */
-#define OMAP2UART1		21
-#define OMAP2UART2		22
-#define OMAP2UART3		23
-#define OMAP3UART1		OMAP2UART1
-#define OMAP3UART2		OMAP2UART2
-#define OMAP3UART3		33
-#define OMAP3UART4		34		/* Only on 36xx */
-#define OMAP4UART1		OMAP2UART1
-#define OMAP4UART2		OMAP2UART2
-#define OMAP4UART3		43
-#define OMAP4UART4		44
-#define TI81XXUART1		81
-#define TI81XXUART2		82
-#define TI81XXUART3		83
-#define AM33XXUART1		84
-#define OMAP5UART3		OMAP4UART3
-#define OMAP5UART4		OMAP4UART4
-#define ZOOM_UART		95		/* Only on zoom2/3 */
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
-		struct omap_uart_port_info *platform_data);
-#endif
-
-#endif
+#include <mach/serial.h>
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 474dba7263e3..d1dedc8195ed 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,13 +26,12 @@
 
 #include <asm/assembler.h>
 
-#include "../plat-omap/sram.h"
-
 #include "omap34xx.h"
 #include "iomap.h"
 #include "cm3xxx.h"
 #include "prm3xxx.h"
 #include "sdrc.h"
+#include "sram.h"
 #include "control.h"
 
 /*
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
new file mode 100644
index 000000000000..0ff0f068bea8
--- /dev/null
+++ b/arch/arm/mach-omap2/sram.c
@@ -0,0 +1,305 @@
+/*
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "prm2xxx_3xxx.h"
+#include "sdrc.h"
+#include "sram.h"
+
+#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
+#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PUB_PA	OMAP4_SRAM_PA
+#else
+#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
+#endif
+#define OMAP5_SRAM_PA		0x40300000
+
+#define SRAM_BOOTLOADER_SZ	0x00
+
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
+
+#define GP_DEVICE		0x300
+
+#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+
+static unsigned long omap_sram_start;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+
+/*
+ * Depending on the target RAMFS firewall setup, the public usable amount of
+ * SRAM varies.  The default accessible size for all device types is 2k. A GP
+ * device allows ARM11 but not other initiators for full size. This
+ * functionality seems ok until some nice security API happens.
+ */
+static int is_sram_locked(void)
+{
+	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
+		/* RAMFW: R/W access to all initiators for all qualifier sets */
+		if (cpu_is_omap242x()) {
+			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
+			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+		}
+		if (cpu_is_omap34xx()) {
+			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
+			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+			__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+			__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+		}
+		return 0;
+	} else
+		return 1; /* assume locked with no PPA or security driver */
+}
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_sram(void)
+{
+	omap_sram_skip = SRAM_BOOTLOADER_SZ;
+	if (is_sram_locked()) {
+		if (cpu_is_omap34xx()) {
+			omap_sram_start = OMAP3_SRAM_PUB_PA;
+			if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+			    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+				omap_sram_size = 0x7000; /* 28K */
+				omap_sram_skip += SZ_16K;
+			} else {
+				omap_sram_size = 0x8000; /* 32K */
+			}
+		} else if (cpu_is_omap44xx()) {
+			omap_sram_start = OMAP4_SRAM_PUB_PA;
+			omap_sram_size = 0xa000; /* 40K */
+		} else if (soc_is_omap54xx()) {
+			omap_sram_start = OMAP5_SRAM_PA;
+			omap_sram_size = SZ_128K; /* 128KB */
+		} else {
+			omap_sram_start = OMAP2_SRAM_PUB_PA;
+			omap_sram_size = 0x800; /* 2K */
+		}
+	} else {
+		if (soc_is_am33xx()) {
+			omap_sram_start = AM33XX_SRAM_PA;
+			omap_sram_size = 0x10000; /* 64K */
+		} else if (cpu_is_omap34xx()) {
+			omap_sram_start = OMAP3_SRAM_PA;
+			omap_sram_size = 0x10000; /* 64K */
+		} else if (cpu_is_omap44xx()) {
+			omap_sram_start = OMAP4_SRAM_PA;
+			omap_sram_size = 0xe000; /* 56K */
+		} else if (soc_is_omap54xx()) {
+			omap_sram_start = OMAP5_SRAM_PA;
+			omap_sram_size = SZ_128K; /* 128KB */
+		} else {
+			omap_sram_start = OMAP2_SRAM_PA;
+			if (cpu_is_omap242x())
+				omap_sram_size = 0xa0000; /* 640K */
+			else if (cpu_is_omap243x())
+				omap_sram_size = 0x10000; /* 64K */
+		}
+	}
+}
+
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+static void __init omap2_map_sram(void)
+{
+	int cached = 1;
+
+#ifdef CONFIG_OMAP4_ERRATA_I688
+	if (cpu_is_omap44xx()) {
+		omap_sram_start += PAGE_SIZE;
+		omap_sram_size -= SZ_16K;
+	}
+#endif
+	if (cpu_is_omap34xx()) {
+		/*
+		 * SRAM must be marked as non-cached on OMAP3 since the
+		 * CORE DPLL M2 divider change code (in SRAM) runs with the
+		 * SDRAM controller disabled, and if it is marked cached,
+		 * the ARM may attempt to write cache lines back to SDRAM
+		 * which will cause the system to hang.
+		 */
+		cached = 0;
+	}
+
+	omap_map_sram(omap_sram_start, omap_sram_size,
+			omap_sram_skip, cached);
+}
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+			      u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+		   u32 base_cs, u32 force_unlock)
+{
+	BUG_ON(!_omap2_sram_ddr_init);
+	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+			     base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+					  u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+	BUG_ON(!_omap2_sram_reprogram_sdrc);
+	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+	BUG_ON(!_omap2_set_prcm);
+	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+#ifdef CONFIG_SOC_OMAP2420
+static int __init omap242x_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+					omap242x_sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+					    omap242x_sram_reprogram_sdrc_sz);
+
+	_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+					 omap242x_sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+static int __init omap243x_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+					omap243x_sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+					    omap243x_sram_reprogram_sdrc_sz);
+
+	_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+					 omap243x_sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap3_sram_configure_core_dpll)(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
+{
+	BUG_ON(!_omap3_sram_configure_core_dpll);
+	return _omap3_sram_configure_core_dpll(
+			m2, unlock_dll, f, inc,
+			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+			sdrc_actim_ctrl_b_0, sdrc_mr_0,
+			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+			sdrc_actim_ctrl_b_1, sdrc_mr_1);
+}
+
+void omap3_sram_restore_context(void)
+{
+	omap_sram_reset();
+
+	_omap3_sram_configure_core_dpll =
+		omap_sram_push(omap3_sram_configure_core_dpll,
+			       omap3_sram_configure_core_dpll_sz);
+	omap_push_sram_idle();
+}
+
+static inline int omap34xx_sram_init(void)
+{
+	omap3_sram_restore_context();
+	return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+static inline int am33xx_sram_init(void)
+{
+	return 0;
+}
+
+int __init omap_sram_init(void)
+{
+	omap_detect_sram();
+	omap2_map_sram();
+
+	if (cpu_is_omap242x())
+		omap242x_sram_init();
+	else if (cpu_is_omap2430())
+		omap243x_sram_init();
+	else if (soc_is_am33xx())
+		am33xx_sram_init();
+	else if (cpu_is_omap34xx())
+		omap34xx_sram_init();
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
new file mode 100644
index 000000000000..ca7277c2a9ee
--- /dev/null
+++ b/arch/arm/mach-omap2/sram.h
@@ -0,0 +1,83 @@
+/*
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+#include <plat/sram.h>
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+extern u32 omap3_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+
+/* Do not use these */
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA		0x40200000
+#define OMAP3_SRAM_PA           0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA		0x40304000
+#define OMAP4_SRAM_VA		0xfe404000
+#else
+#define OMAP4_SRAM_PA		0x40300000
+#endif
+#define AM33XX_SRAM_PA		0x40300000
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 565e5755c9bc..c5bc2cb4d8d3 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -45,6 +45,7 @@
 #include <asm/arch_timer.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
+#include <plat/counter-32k.h>
 #include <plat/dmtimer.h>
 #include "omap-pm.h"
 
@@ -559,6 +560,8 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
 	if (timer_dev_attr)
 		pdata->timer_capability = timer_dev_attr->timer_capability;
 
+	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+
 	pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
 				 NULL, 0, 0);