ARM: orion: remove unused board files

As planned earlier, all board support that was marked unused can be
removed now after nobody explicitly asked for these to be kept.

In particular, all of the reference designs get removed now, as these
are not commonly used productively any more. Also, the machines that
were not supported by Debian or the Debian_on_Buffalo group because of
limitations with RAM size are gone.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 183 deletions

diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
deleted file mode 100644
index d4b1a9c3cd36..000000000000
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
- *
- * Marvell Orion-VoIP GE Reference Design Setup
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5181L GE Info
- ****************************************************************************/
-/*
- * 16M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_GE_NOR_BOOT_BASE		0xff000000
-#define RD88F5181L_GE_NOR_BOOT_SIZE		SZ_16M
-
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_GE_NOR_BOOT_BASE,
-	.end		= RD88F5181L_GE_NOR_BOOT_BASE +
-			  RD88F5181L_GE_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_ge_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_ge_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_ge_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 */
-	MPP1_GPIO,		/* LED5 */
-	MPP2_GPIO,		/* LED4 */
-	MPP3_GPIO,		/* LED3 */
-	MPP4_GPIO,		/* PCI_intA */
-	MPP5_GPIO,		/* RTC interrupt */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* 88e6131 interrupt */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* PCI_intB */
-	MPP11_GPIO,		/* LED2 */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-static void __init rd88f5181l_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5181L_GE_NOR_BOOT_BASE,
-				    RD88F5181L_GE_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
-
-	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
-}
-
-static int __init
-rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Cardbus slot.
-	 */
-	if (pin == 1)
-		return gpio_to_irq(4);
-	else
-		return gpio_to_irq(10);
-}
-
-static struct hw_pci rd88f5181l_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_ge_pci_map_irq,
-};
-
-static int __init rd88f5181l_ge_pci_init(void)
-{
-	if (machine_is_rd88f5181l_ge()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_ge_pci_init);
-
-MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5181l_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END