ARM: s3c: move into a common directory

s3c24xx and s3c64xx have a lot in common, but are split across three
separate directories, which makes the interaction of the header files
more complicated than necessary.

Move all three directories into a new mach-s3c, with a minimal
set of changes to each file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[krzk: Rebase, add s3c24xx and s3c64xx suffix to several files, add SPDX
       headers to new files, remove plat-samsung from MAINTAINERS]
Co-developed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
https://lore.kernel.org/r/20200806182059.2431-39-krzk@kernel.org

1 files changed, 0 insertions, 350 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
deleted file mode 100644
index f3fcb570edf5..000000000000
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ /dev/null
@@ -1,350 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright 2008 Openmoko, Inc.
-#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-
-menuconfig ARCH_S3C64XX
-	bool "Samsung S3C64XX"
-	depends on ARCH_MULTI_V6
-	select ARM_AMBA
-	select ARM_VIC
-	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK_SAMSUNG
-	select GPIO_SAMSUNG if ATAGS
-	select GPIOLIB
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_TCM
-	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND if ATAGS
-	select S3C_GPIO_TRACK if ATAGS
-	select S3C2410_WATCHDOG
-	select SAMSUNG_ATAGS if ATAGS
-	select SAMSUNG_WAKEMASK if PM
-	select WATCHDOG
-	help
-	  Samsung S3C64XX series based systems
-
-if ARCH_S3C64XX
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
-	bool
-	help
-	  Enable S3C6400 CPU support
-
-config CPU_S3C6410
-	bool
-	help
-	  Enable S3C6410 CPU support
-
-config S3C64XX_PL080
-	def_bool DMADEVICES
-	select AMBA_PL08X
-
-config S3C64XX_SETUP_SDHCI
-	bool
-	select S3C64XX_SETUP_SDHCI_GPIO
-	help
-	  Internal configuration for default SDHCI setup for S3C6400 and
-	  S3C6410 SoCs.
-
-config S3C64XX_DEV_ONENAND1
-	bool
-	help
-	  Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
-	bool
-	depends on SAMSUNG_DEV_PWM
-	help
-	  Compile in platform device definition LCD backlight with PWM Timer
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_IDE
-	bool
-	help
-	  Common setup code for S3C64XX IDE.
-
-config S3C64XX_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_KEYPAD
-	bool
-	help
-	  Common setup code for S3C64XX KEYPAD GPIO configurations
-
-config S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for S3C64XX SDHCI GPIO configurations
-
-config S3C64XX_SETUP_SPI
-	bool
-	help
-	 Common setup code for SPI GPIO configurations
-
-config S3C64XX_SETUP_USB_PHY
-	bool
-	help
-	  Common setup code for USB PHY controller
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
-       bool "SMDK6400"
-	depends on ATAGS
-	select CPU_S3C6400
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC1
-	help
-	  Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
-	bool "A&W6410"
-	depends on ATAGS
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	help
-	  Machine support for the A&W6410
-
-config MACH_MINI6410
-	bool "MINI6410"
-	depends on ATAGS
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
-	bool "REAL6410"
-	depends on ATAGS
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	depends on ATAGS
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
-	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM8350_I2C
-	select REGULATOR
-	select REGULATOR_WM8350
-	help
-	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
-	  and audio daughtercard for the Samsung SMDK6410 reference
-	  platform.  Enabling this option will build support for this
-	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
-	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM831X
-	select MFD_WM831X_I2C
-	select REGULATOR
-	select REGULATOR_WM831X
-	help
-	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
-	  daughtercard for the Samsung SMDK6410 reference platform.
-	  Enabling this option will build support for this module into
-	  the kernel.  The presence of the daughtercard will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1192-EV1 fitted.
-
-config MACH_NCP
-	bool "NCP"
-	depends on ATAGS
-	select CPU_S3C6410
-	select S3C64XX_SETUP_I2C1
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	help
-          Machine support for the Samsung NCP
-
-config MACH_HMT
-	bool "Airgoo HMT"
-	depends on ATAGS
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
-	bool
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HWMON
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	    Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
-	bool "SmartQ 5"
-	depends on ATAGS
-	select MACH_SMARTQ
-	help
-	    Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
-	bool "SmartQ 7"
-	depends on ATAGS
-	select MACH_SMARTQ
-	help
-	    Machine support for the SmartQ 7
-
-config MACH_WLF_CRAGG_6410
-	bool "Wolfson Cragganmore 6410"
-	depends on ATAGS
-	depends on I2C=y
-	select CPU_S3C6410
-	select LEDS_GPIO_REGISTER
-	select S3C64XX_DEV_SPI0
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_SPI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for the Wolfson Cragganmore S3C6410 variant.
-
-config MACH_S3C64XX_DT
-	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
-	select CPU_S3C6400
-	select CPU_S3C6410
-	select PINCTRL
-	select PINCTRL_S3C64XX
-	help
-	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
-	  enabled.
-	  Select this if a fdt blob is available for your S3C64XX SoC based
-	  board.
-	  Note: This is under development and not all peripherals can be
-	  supported with this machine file.
-
-endif