ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h

Combine both headers into one, rename to h3xxx.h and change all
users accordingly.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 90 insertions, 0 deletions

diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 000000000000..7f1e130be949
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,90 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON		0
+#define H3XXX_GPIO_PCMCIA_CD1		10
+#define H3XXX_GPIO_PCMCIA_IRQ1		11
+#define H3XXX_GPIO_PCMCIA_CD0		17
+#define H3XXX_GPIO_ACTION_BUTTON	18
+#define H3XXX_GPIO_SYS_CLK		19
+#define H3XXX_GPIO_PCMCIA_IRQ0		21
+#define H3XXX_GPIO_COM_DCD		23
+#define H3XXX_GPIO_OPTION		24
+#define H3XXX_GPIO_COM_CTS		25
+#define H3XXX_GPIO_COM_RTS		26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON		2
+#define H3100_GPIO_QMUTE		4
+#define H3100_GPIO_LCD_3V_ON		5
+#define H3100_GPIO_AUD_ON		6
+#define H3100_GPIO_AUD_PWR_ON		7
+#define H3100_GPIO_IR_ON		8
+#define H3100_GPIO_IR_FSEL		9
+
+#define H3600_GPIO_CLK_SET0		12	/* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1		13
+#define H3600_GPIO_SOFT_RESET		20	/* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK		22
+#define H3600_GPIO_OPT_DET		27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE		(GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON		(H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET		(H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card.  active high. */
+#define H3XXX_EGPIO_OPT_RESET		(H3XXX_EGPIO_BASE + 2) /* reset the attached option pack.  active high. */
+#define H3XXX_EGPIO_CODEC_NRESET	(H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341.  active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON	(H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON		(H3XXX_EGPIO_BASE + 5) /* full power to option pack.  active high. */
+#define H3XXX_EGPIO_LCD_ON		(H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD.  active high. */
+#define H3XXX_EGPIO_RS232_ON		(H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI		(H3XXX_EGPIO_BASE + 8) /* LCD control IC enable.  active high. */
+#define H3600_EGPIO_IR_ON		(H3XXX_EGPIO_BASE + 9) /* apply power to IR module.  active high. */
+#define H3600_EGPIO_AUD_AMP_ON		(H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp.  active high. */
+#define H3600_EGPIO_AUD_PWR_ON		(H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit.  active high. */
+#define H3600_EGPIO_QMUTE		(H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341.  active high. */
+#define H3600_EGPIO_IR_FSEL		(H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON		(H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON		(H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+#endif /* _INCLUDE_H3XXX_H_ */