Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.1
- new board: G12a-based x96 max
- G12a: add peripheral clock controller and clock measure support
- s400: fix SD/eMMC max rate issues
- s400: audio: add sp/dif in support
- GX: support simplefb

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add g12a x96 max board
  dt-bindings: arm: amlogic: add amediatech x96-max bindings
  arm64: dts: meson: g12a: add peripheral clock controller
  arm64: dts: meson: g12a: add clk measure support
  arm64: dts: meson: axg: add clk measure support
  arm64: dts: meson: fix g12a buses
  arm64: dts: meson-axg: add efuse device
  arm64: dts: meson: s400: fix emmc maximum rate
  arm64: dts: meson: s400: enable sdr104 on sdio
  arm64: dts: meson-gx: add support for simplefb
  dt-bindings: meson: add specific simplefb bindings
  arm64: dts: meson-gx: Add canvas provider node to the vpu
  arm64: dts: meson-axg: s400: add spdifin to the sound card
  arm64: dts: meson-axg: s400: add spdif-dir codec
  arm64: dts: meson-axg: add spdifin

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 41 insertions, 21 deletions

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 10418e4b048a..17c6217f8a84 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -78,20 +78,41 @@
 		#size-cells = <2>;
 		ranges;
 
-		periphs: periphs@ff634000 {
+		apb: bus@ff600000 {
 			compatible = "simple-bus";
-			reg = <0x0 0xff634000 0x0 0x2000>;
+			reg = <0x0 0xff600000 0x0 0x200000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
-		};
+			ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+			periphs: bus@34400 {
+				compatible = "simple-bus";
+				reg = <0x0 0x34400 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+			};
 
-		hiubus: bus@ff63c000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xff63c000 0x0 0x1c00>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+			hiu: bus@3c000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x3c000 0x0 0x1400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+				hhi: system-controller@0 {
+					compatible = "amlogic,meson-gx-hhi-sysctrl",
+						     "simple-mfd", "syscon";
+					reg = <0 0 0 0x400>;
+
+					clkc: clock-controller {
+						compatible = "amlogic,g12a-clkc";
+						#clock-cells = <1>;
+						clocks = <&xtal>;
+						clock-names = "xtal";
+					};
+				};
+			};
 		};
 
 		aobus: bus@ff800000 {
@@ -102,7 +123,8 @@
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
 			uart_AO: serial@3000 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -111,7 +133,8 @@
 			};
 
 			uart_AO_B: serial@4000 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -135,18 +158,15 @@
 
 		cbus: bus@ffd00000 {
 			compatible = "simple-bus";
-			reg = <0x0 0xffd00000 0x0 0x25000>;
+			reg = <0x0 0xffd00000 0x0 0x100000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
-		};
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
 
-		apb: apb@ffe00000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xffe00000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-g12a-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
 		};
 	};