diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2019-05-11 19:45:34 +0200 |
|---|---|---|
| committer | Kevin Hilman <khilman@baylibre.com> | 2019-05-21 10:58:40 -0700 |
| commit | 890265c97941e10ea99203f082e0d108ed573999 (patch) | |
| tree | ac0a2be08a2c7a064de7333d4397032ed45dd209 /arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | |
| parent | ebf4a5f6a52e43c4fe6fb5dbcbcd51716dd0dc64 (diff) | |
arm64: dts: amlogic: remove ethernet-phy-idAAAA.BBBB compatible strings
The Ethernet PHY documentation
(Documentation/devicetree/bindings/net/phy.txt) states that:
If the PHY reports an incorrect ID (or none at all) then the
"compatible" list may contain an entry with the correct PHY ID in the
form: "ethernet-phy-idAAAA.BBBB"
An older version of the documentation suggested that the compatible
string can be used when the PHY ID is known.
Remove the ethernet-phy-id compatible string and add a comment with the
PHY ID instead.
This is a no-op on boards which are shipped with the PHY that was
listed (= all known cases). However, if a board manufacturer decides to
ship a different PHY we will now load and use the correct driver because
we ask the PHY to identify itself.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 0c8e8305b1f3..767b1763a612 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -81,7 +81,7 @@ &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; interrupt-parent = <&gpio_intc>; |