Merge tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.12:

- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen,
  Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP,
  Librem5 Evergreen.
- Update imx8mm-beacon to drop unused clock-names reference, and add
  more pinctrl states for USDHC1.
- Support soc unique ID read with NVMEM on i.MX8M SoCs.
- A series from Biwen Li to add interrupt line for RTC device on
  Layerscape SoCs.
- A couple of patch sets to update imx8mq-librem5 support around
  regulators, RTC, charger, display, etc.
- A series from Joakim Zhang to improve i.MX8M FEC device configuration.
- A series from Kuldeep Singh to enable flexcan support for LX2160A and
  LS1028A.
- A series from Lucas Stach to update ZII devices around audio, USB, I2C
  pin configuration and UCS1002 ALERT.
- A series from Michael Walle to update Layerscape device trees to use
  constants in the clockgen phandle, add sl28 variant 1 and enable SATA.
- A few patches from Russell King to improve support for a couple of
  LX2160A boards.
- A series from Shengjiu Wang to add more audio support for imx8mn-evk.
- Other small and random updates.

* tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
  arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
  arm64: dts: zii-rmb3: enable RMI4 reduced reporting
  arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin
  arm64: dts: zii-ultra: limit USB ports to USB2 speed
  arm64: dts: zii-ultra: fix i2c pin configuration
  arm64: dts: zii-ultra: add sound support
  arm64: dts: ls1028a: Enable flexcan support for LS1028A-RDB/QDS
  arm64: dts: ls1028a: Update flexcan properties
  arm64: dts: lx2160a: Add flexcan support
  arm64: dts: fsl-ls1012a-frdm: add spi-uart device
  arm64: dts: fsl-ls1012a-rdb: add i2c devices
  arm64: dts: imx8mn-beacon-som: Enable QSPI on SOM
  arm64: dts: imx8mn: Add fspi node
  arm64: dts: Add Librem5 Evergreen
  arm64: dts: imx8mq-librem5: set regulators boot-on
  arm64: dts: imx8mq-librem5: enable the LCD panel
  arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator
  arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
  arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
  arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
  ...

Link: https://lore.kernel.org/r/20210204120150.26186-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 133 insertions, 49 deletions

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 6c8a61c2cc74..262fbad8f0ec 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -8,6 +8,7 @@
  *
  */
 
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -30,7 +31,7 @@
 			compatible = "arm,cortex-a72";
 			reg = <0x0>;
 			enable-method = "psci";
-			clocks = <&clockgen 1 0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PW20>;
 			#cooling-cells = <2>;
@@ -41,7 +42,7 @@
 			compatible = "arm,cortex-a72";
 			reg = <0x1>;
 			enable-method = "psci";
-			clocks = <&clockgen 1 0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PW20>;
 			#cooling-cells = <2>;
@@ -205,9 +206,20 @@
 		};
 
 		dcfg: syscon@1e00000 {
-			compatible = "fsl,ls1028a-dcfg", "syscon";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
 			reg = <0x0 0x1e00000 0x0 0x10000>;
+			ranges = <0x0 0x0 0x1e00000 0x10000>;
 			little-endian;
+
+			fspi_clk: clock-controller@900 {
+				compatible = "fsl,ls1028a-flexspi-clk";
+				reg = <0x900 0x4>;
+				#clock-cells = <0>;
+				clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
+				clock-output-names = "fspi_clk";
+			};
 		};
 
 		rst: syscon@1e60000 {
@@ -235,7 +247,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -245,7 +258,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -255,7 +269,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -265,7 +280,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -275,7 +291,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -285,7 +302,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2050000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -295,7 +313,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2060000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -305,7 +324,8 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2070000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
 			status = "disabled";
 		};
 
@@ -317,7 +337,7 @@
 			      <0x0 0x20000000 0x0 0x10000000>;
 			reg-names = "fspi_base", "fspi_mmap";
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 2 0>, <&clockgen 2 0>;
+			clocks = <&fspi_clk>, <&fspi_clk>;
 			clock-names = "fspi_en", "fspi";
 			status = "disabled";
 		};
@@ -329,7 +349,8 @@
 			reg = <0x0 0x2100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			dmas = <&edma0 0 62>, <&edma0 0 60>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
@@ -344,7 +365,8 @@
 			reg = <0x0 0x2110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			dmas = <&edma0 0 58>, <&edma0 0 56>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
@@ -359,7 +381,8 @@
 			reg = <0x0 0x2120000 0x0 0x10000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			dmas = <&edma0 0 54>, <&edma0 0 2>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <3>;
@@ -372,7 +395,7 @@
 			reg = <0x0 0x2140000 0x0 0x10000>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>; /* fixed up by bootloader */
-			clocks = <&clockgen 2 1>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			little-endian;
@@ -385,7 +408,7 @@
 			reg = <0x0 0x2150000 0x0 0x10000>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>; /* fixed up by bootloader */
-			clocks = <&clockgen 2 1>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			broken-cd;
@@ -395,19 +418,25 @@
 		};
 
 		can0: can@2180000 {
-			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			compatible = "fsl,lx2160ar1-flexcan";
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg", "per";
 			status = "disabled";
 		};
 
 		can1: can@2190000 {
-			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			compatible = "fsl,lx2160ar1-flexcan";
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg", "per";
 			status = "disabled";
 		};
@@ -416,7 +445,8 @@
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -424,7 +454,8 @@
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -433,7 +464,8 @@
 			compatible = "fsl,ls1028a-lpuart";
 			reg = <0x0 0x2260000 0x0 0x1000>;
 			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
 			dma-names = "rx","tx";
 			dmas = <&edma0 1 32>,
@@ -445,7 +477,8 @@
 			compatible = "fsl,ls1028a-lpuart";
 			reg = <0x0 0x2270000 0x0 0x1000>;
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
 			dma-names = "rx","tx";
 			dmas = <&edma0 1 30>,
@@ -457,7 +490,8 @@
 			compatible = "fsl,ls1028a-lpuart";
 			reg = <0x0 0x2280000 0x0 0x1000>;
 			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
 			dma-names = "rx","tx";
 			dmas = <&edma0 1 28>,
@@ -469,7 +503,8 @@
 			compatible = "fsl,ls1028a-lpuart";
 			reg = <0x0 0x2290000 0x0 0x1000>;
 			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
 			dma-names = "rx","tx";
 			dmas = <&edma0 1 26>,
@@ -481,7 +516,8 @@
 			compatible = "fsl,ls1028a-lpuart";
 			reg = <0x0 0x22a0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
 			dma-names = "rx","tx";
 			dmas = <&edma0 1 24>,
@@ -493,7 +529,8 @@
 			compatible = "fsl,ls1028a-lpuart";
 			reg = <0x0 0x22b0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
 			dma-names = "rx","tx";
 			dmas = <&edma0 1 22>,
@@ -512,8 +549,10 @@
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			clock-names = "dmamux0", "dmamux1";
-			clocks = <&clockgen 4 1>,
-				 <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 		};
 
 		gpio1: gpio@2300000 {
@@ -575,7 +614,8 @@
 				<0x7 0x100520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -747,14 +787,20 @@
 		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
-			clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
-			clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
@@ -763,8 +809,14 @@
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0xf100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 4>,
@@ -778,8 +830,14 @@
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0xf110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 6>,
@@ -793,8 +851,14 @@
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0xf120000 0x0 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 8>,
@@ -808,8 +872,14 @@
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0xf130000 0x0 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 10>,
@@ -823,8 +893,14 @@
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0xf140000 0x0 0x10000>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 12>,
@@ -838,8 +914,14 @@
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0xf150000 0x0 0x10000>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 14>,
@@ -960,7 +1042,7 @@
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
-				clocks = <&clockgen 2 3>;
+				clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
 				little-endian;
 				fsl,extts-fifo;
 			};
@@ -1055,8 +1137,10 @@
 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "DE", "SE";
-		clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
-			 <&clockgen 2 2>;
+		clocks = <&dpclk>,
+			 <&clockgen QORIQ_CLK_HWACCEL 2>,
+			 <&clockgen QORIQ_CLK_HWACCEL 2>,
+			 <&clockgen QORIQ_CLK_HWACCEL 2>;
 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
 		arm,malidp-arqos-value = <0xd000d000>;