Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "As always, the bulk of updates.  Some of the news this cycle:

  New SoC descriptions:
   - Broadcom BCM2711
   - Amlogic Meson A1 and G12
   - Freescale S32V234
   - Marvell Armada AP807/AP807-quad and CP115
   - Realtek RTD1293 and RTD1296
   - Rockchip RK3308

  New boards and platforms:
   - Allwinner: NanoPi Duo2
   - Amlogic: Ugoos am6
   - Atmel at91: Overkiz Kizbox2/4
   - Broadcom: RPi4, Luxul XWC-2000
   - Marvell: New Espressobin flavor
   - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix
     E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and
     OPOS6ULDev
   - Renesas: Salvator-XS
   - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits)
  ARM: dts: logicpd-torpedo: Disable USB Host
  arm: dts: mt6323: add keys, power-controller, rtc and codec
  arm64: dts: mt8183: add systimer0 device node
  dt-bindings: mediatek: update bindings for MT8183 systimer
  arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc
  arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.
  arm64: dts: rockchip: Add Beelink A1
  dt-bindings: ARM: rockchip: Add Beelink A1
  arm64: dts: rockchip: Add RK3328 audio pipelines
  arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports
  arm64: dts: ti: k3-j721e-main: add USB controller nodes
  ARM: dts: aspeed-g6: Add timer description
  ARM: dts: aspeed: ast2600evb: Enable i2c buses
  ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards
  dt-bindings: arm: at91: Document Kizbox2-2 board binding
  arm64: dts: meson-gx: fix i2c compatible
  arm64: dts: meson-gx: cec node should be disabled by default
  arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible
  arm64: dts: meson-gxm: fix gpu irq order
  arm64: dts: meson-g12a: fix gpu irq order
  ...

1 files changed, 4 insertions, 49 deletions

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 34881c0113cb..9a4ff57fc877 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -165,6 +165,8 @@
 /delete-node/ &venus_mem;
 /delete-node/ &cdsp_mem;
 /delete-node/ &cdsp_pas;
+/delete-node/ &zap_shader;
+/delete-node/ &gpu_mem;
 
 /* Increase the size from 120 MB to 128 MB */
 &mpss_region {
@@ -701,9 +703,8 @@ ap_ts_i2c: &i2c14 {
 
 &ufs_mem_hc {
 	status = "okay";
-	pinctrl-names = "init", "default";
-	pinctrl-0 = <&ufs_dev_reset_assert>;
-	pinctrl-1 = <&ufs_dev_reset_deassert>;
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 
 	vcc-supply = <&src_pp2950_l20a>;
 	vcc-max-microamp = <600000>;
@@ -1258,52 +1259,6 @@ ap_ts_i2c: &i2c14 {
 		};
 	};
 
-	ufs_dev_reset_assert: ufs_dev_reset_assert {
-		config {
-			pins = "ufs_reset";
-			bias-pull-down;		/* default: pull down */
-			/*
-			 * UFS_RESET driver strengths are having
-			 * different values/steps compared to typical
-			 * GPIO drive strengths.
-			 *
-			 * Following table clarifies:
-			 *
-			 * HDRV value | UFS_RESET | Typical GPIO
-			 *   (dec)    |   (mA)    |    (mA)
-			 *     0      |   0.8     |    2
-			 *     1      |   1.55    |    4
-			 *     2      |   2.35    |    6
-			 *     3      |   3.1     |    8
-			 *     4      |   3.9     |    10
-			 *     5      |   4.65    |    12
-			 *     6      |   5.4     |    14
-			 *     7      |   6.15    |    16
-			 *
-			 * POR value for UFS_RESET HDRV is 3 which means
-			 * 3.1mA and we want to use that. Hence just
-			 * specify 8mA to "drive-strength" binding and
-			 * that should result into writing 3 to HDRV
-			 * field.
-			 */
-			drive-strength = <8>;	/* default: 3.1 mA */
-			output-low; /* active low reset */
-		};
-	};
-
-	ufs_dev_reset_deassert: ufs_dev_reset_deassert {
-		config {
-			pins = "ufs_reset";
-			bias-pull-down;		/* default: pull down */
-			/*
-			 * default: 3.1 mA
-			 * check comments under ufs_dev_reset_assert
-			 */
-			drive-strength = <8>;
-			output-high; /* active low reset */
-		};
-	};
-
 	ap_suspend_l_assert: ap_suspend_l_assert {
 		config {
 			pins = "gpio126";