Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC DT updates from Arnd Bergmann:
 "About a quarter of the changes are for 32-bit arm, mostly filling in
  device support for existing machines and adding minor cleanups, mostly
  for Qualcomm and Samsung based machines.

  Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
  Rockchips that have been around for a while but were lacking kernel
  support so far: RV1126 is a Vision SoC with an NPU and is used in the
  Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
  for TV boxes and so far only comes with a dts for its refernece
  design.

  The other 32-bit boards that were added are two ASpeed AST2600 based
  BMC boards, the Microchip sam9x60_curiosity development board (Armv5
  based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
  for i.MX53 and i.MX6ULL.

  On the RISC-V side, there are fewer patches, but a total of ten new
  single-board computers based on variations of the Allwinner D1/T113
  chip, plus one more board based on Microchip Polarfire.

  As usual, arm64 has by far the most changes here, with over 700
  non-merge changesets, among them over 400 alone for Qualcomm. The
  newly added SoCs this time are all recent high-end embedded SoCs for
  various markets, each on comes with support for its reference board:

   - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
   - Qualcomm QDU1000/QRU1000 5G RAN platform
   - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
   - TI J784S4 for industrial and automotive applications

  In total, there are 46 new arm64 machines:
   - Reference platforms for each of the five new SoCs
   - Three Amlogic based development boards
   - Six embedded machines based on NXP i.MX8MM and i.MX8MP
   - The Mediatek mt7986a based Banana Pi R3 router
   - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
     (Snapdragon 662) and SM8250 (Snapdragon 865)
   - Two LTE dongles, also based on MSM8916
   - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
     SDM450 and SDM632
   - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
   - Nine development boards based on Rockchips RK3588, RK3568, RK3566
     and RK3328.
   - Five development machines based on TI K3 (AM642/AM654/AM68/AM69)

  The cleanup of dtc warnings continues across all platforms, adding to
  the total number of changes"

* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
  dt-bindings: riscv: correct starfive visionfive 2 compatibles
  ARM: dts: socfpga: Add enclustra PE1 devicetree
  dt-bindings: altera: Add enclustra mercury PE1
  arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
  arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
  arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
  arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
  arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
  arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
  arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
  arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
  arm64: dts: qcom: pmk8350: Use the correct PON compatible
  arm64: dts: qcom: sc8280xp-x13s: Enable external display
  arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
  arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
  arm64: dts: qcom: sm8350-hdk: enable GPU
  arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
  arm64: dts: qcom: sm8350: finish reordering nodes
  arm64: dts: qcom: sm8350: move more nodes to correct place
  arm64: dts: qcom: sm8350: reorder device nodes
  ...

1 files changed, 22 insertions, 32 deletions

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index eb6b2b676eca..e0fda4d754fe 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 
@@ -46,7 +47,7 @@
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -97,6 +98,12 @@
 			no-map;
 		};
 
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 0x2400000>;
+			no-map;
+		};
+
 		rmtfs_mem: memory@f6301000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0 0xf6301000 0 0x200000>;
@@ -123,7 +130,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -299,12 +306,13 @@
 };
 
 &ipa {
-	status = "okay";
+	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
 	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
+	status = "okay";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";
@@ -325,14 +333,9 @@
 	qcom,cabc;
 };
 
-&pm8998_pon {
-	resin {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pmi8998_rradc {
@@ -379,7 +382,7 @@
 };
 
 &sound {
-	compatible = "qcom,db845c-sndcard";
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active
 			&quat_mi2s_sd0_active>;
 	pinctrl-names = "default";
@@ -445,40 +448,31 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio126";
 		function = "gpio";
 		bias-pull-up;
 	};
-
-	wcd_intr_default: wcd_intr_default {
-		pins = <54>;
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -546,11 +540,7 @@
 	firmware-name = "qcom/sdm845/beryllium/venus.mbn";
 };
 
-&wcd9340{
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+&wcd9340 {
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;