diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-06-29 15:07:06 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-06-29 15:07:06 -0700 |
| commit | 6c1561fb900524c5bceb924071b3e9b8a67ff3da (patch) | |
| tree | 3bedd8d3bfac4b15a176e53449b2889418040e44 /arch/arm64/boot/dts/qcom | |
| parent | b775d6c5859affe00527cbe74263de05cfe6b9f9 (diff) | |
| parent | 46448b36ff8c807194d5884a6efce00891e4bd02 (diff) | |
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
Diffstat (limited to 'arch/arm64/boot/dts/qcom')
140 files changed, 19482 insertions, 3438 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d42c59572ace..337abc4ceb17 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,15 +1,22 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -32,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb @@ -82,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -140,6 +149,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb @@ -173,7 +184,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 59860a2223b8..f3d65a606194 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -18,8 +18,10 @@ compatible = "qcom,apq8016-sbc", "qcom,apq8016"; aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart1; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + serial1 = &blsp_uart1; usid0 = &pm8916_0; i2c0 = &blsp_i2c2; i2c1 = &blsp_i2c6; @@ -75,7 +77,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -101,13 +103,13 @@ button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; }; }; leds { pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, + pinctrl-0 = <&tlmm_leds>, <&pm8916_gpios_leds>, <&pm8916_mpps_leds>; @@ -117,7 +119,7 @@ label = "apq8016-sbc:green:user1"; function = LED_FUNCTION_HEARTBEAT; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -126,7 +128,7 @@ label = "apq8016-sbc:green:user2"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; @@ -186,14 +188,14 @@ compatible = "adi,adv7533"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; clocks = <&rpmcc RPM_SMD_BB_CLK2>; clock-names = "cec"; - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; avdd-supply = <&pm8916_l6>; v1p2-supply = <&pm8916_l6>; @@ -211,7 +213,7 @@ port@0 { reg = <0>; adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -243,12 +245,12 @@ label = "LS-SPI0"; }; -&blsp1_uart1 { +&blsp_uart1 { status = "okay"; label = "LS-UART0"; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; label = "LS-UART1"; }; @@ -276,8 +278,8 @@ compatible = "ovti,ov5640"; reg = <0x3b>; - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&camera_rear_default>; @@ -301,12 +303,11 @@ }; }; -&dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; +&lpass { + status = "okay"; }; -&lpass { +&lpass_codec { status = "okay"; }; @@ -314,40 +315,78 @@ status = "okay"; }; +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + &mpss { status = "okay"; firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; }; +&pm8916_codec { + status = "okay"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + /* + * The 96Boards specification expects a 1.8V power rail on the low-speed + * expansion connector that is able to provide at least 0.18W / 100 mA. + * L15/L16 are connected in parallel to provide 55 mA each. A minimum load + * must be specified to ensure the regulators are not put in LPM where they + * would only provide 5 mA. + */ + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &sound { status = "okay"; - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; pinctrl-names = "default", "sleep"; model = "DB410c"; audio-routing = @@ -370,7 +409,7 @@ sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; }; }; @@ -380,7 +419,7 @@ sound-dai = <&lpass MI2S_TERTIARY>; }; codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; }; }; }; @@ -398,13 +437,6 @@ extcon = <&usb_id>; }; -&wcd_codec { - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - &wcnss { status = "okay"; firmware-name = "qcom/apq8016/wcnss.mbn"; @@ -441,130 +473,19 @@ &stm { status = "okay"; }; &tpiu { status = "okay"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l5 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l8 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l9 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l10 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l11 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l13 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l14 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-always-on; - }; - - l16 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l18 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; -}; - /* * 2mA drive strength is not enough when connecting multiple * I2C devices with different pull up resistors. */ -&i2c2_default { +&blsp_i2c2_default { drive-strength = <16>; }; -&i2c4_default { +&blsp_i2c4_default { drive-strength = <16>; }; -&i2c6_default { +&blsp_i2c6_default { drive-strength = <16>; }; @@ -592,7 +513,7 @@ * ones actually used for GPIO. */ -&msmgpio { +&tlmm { gpio-line-names = "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ @@ -717,7 +638,14 @@ "USR_LED_2_CTRL", /* GPIO 120 */ "SB_HS_ID"; - msmgpio_leds: msmgpio-leds-state { + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tlmm_leds: tlmm-leds-state { pins = "gpio21", "gpio120"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts new file mode 100644 index 000000000000..40644c242fb7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/apq8016-lpass.h> + +/ { + model = "Square, Inc. T2 Devkit"; + compatible = "square,apq8039-t2", "qcom,msm8939"; + + qcom,board-id = <0x53 0x54>; + qcom,msm-id = <QCOM_ID_APQ8039 0x30000>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp_uart1; + serial1 = &blsp_uart2; + }; + + bl: backlight { + compatible = "gpio-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pinctrl-names = "default"; + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + vreg_lcd_avdd_reg: lcd-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avdd"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avdd_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_avee_reg: lcd-avee-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avee"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avee_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_iovcc_reg: lcd-iovcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_iovcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&pinctrl_lcd_iovcc_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; +}; + +&blsp_i2c1 { + status = "okay"; +}; + +&blsp_i2c2 { + status = "okay"; +}; + +&blsp_i2c3 { + status = "okay"; + + typec_pd: usb-pd@38 { + compatible = "ti,tps6598x"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <107 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_irq>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + typec_ep: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; +}; + +&blsp_uart1 { + status = "okay"; +}; + +&blsp_uart1_default { + pins = "gpio0", "gpio1"; +}; + +&blsp_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&lpass_codec { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_codec { + qcom,hphl-jack-type-normally-open; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "PM_GPIO1", /* WIFI_GPIO1_PRE */ + "PM_GPIO2", /* WIFI_GPIO2_PRE */ + "PM_GPIO3", + "PM_GPIO4"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sound { + model = "apq8039-square-sndcard"; + audio-routing = "AMIC2", "MIC BIAS Internal2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; + + internal-codec-playback-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + internal-codec-capture-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; + +/* + * Line names are taken from the schematic of T2, Ver X03. + * July 14, 2018. Page 4 in particular. + */ +&tlmm { + gpio-line-names = + "APQ_UART1_TX", /* GPIO_0 */ + "APQ_UART1_RX", + "APQ_I2C1_SDA", + "APQ_I2C1_SCL", + "APQ_UART2_TX_1V8", + "APQ_UART2_RX_1V8", + "APQ_I2C2_SDA", + "APQ_I2C2_SCL", + "NC", + "APQ_LCD_IOVCC_EN", + "APQ_I2C3_SDA", /* GPIO_10 */ + "APQ_I2C3_SCL", + "TOUCH_RST_1V8_L", + "NC", + "APQ_I2C4_SDA", + "APQ_I2C4_SCL", + "APQ_ID5", + "USB_DISCONNECT", + "APQ_I2C5_SDA", + "APQ_I2C5_SCL", + "APQ_USBC_SPI_MOSI", /* GPIO_20 */ + "APQ_USBC_SPI_MISO", + "APQ_USBC_SPI_SS_L", + "APQ_USBC_SPI_CLK", + "APQ_LCD_TE0", + "APQ_LCD_RST_L", + "NC", + "NC", + "ACCELEROMETER_INT1", + "APQ_CAM_I2C0_SDA", + "APQ_CAM_I2C0_SCL", /* GPIO_30 */ + "ACCELEROMETER_INT2", + "NC", + "NC", + "NC", + "APQ_K21_RST_1V8_L", + "NC", + "APQ_EDL_1V8", + "TP145", + "BT_SSBI", + "NC", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "BT_CTRL", + "BT_DAT", + "PWR_GPIO_IN", + "PWR_GPIO_OUT", /* GPIO_50 */ + "CARD_DET_MLB_L", + "HALL_SENSOR", + "TP63", + "TP64", + "TP65", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "APQ_K21_GPIO0_1V8", + "CDC_PDM_CLK", + "CDC_PDM_SYNC", + "CDC_PDM_TX", + "CDC_PDM_RX0", + "CDC_PDM_RX1", + "CDC_PDM_RX2", + "APQ_K21_GPIO1_1V8", + "NC", /* GPIO_70 */ + "APQ_HUB_SEL_1V8", + "APQ_K21_GPIO2_1V8", + "APQ_K21_GPIO3_1V8", + "APQ_ID0", + "APQ_ID1", + "APQ_ID2", + "APQ_ID3", + "APQ_ID4", + "APQ_HUB_SUSP_IND", + "BOOT_CONFIG_0", /* GPIO_80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "APQ_LCD_AVDD_EN", + "APQ_LCD_AVEE_EN", + "TP70", + "NC", + "APQ_DEBUG0", /* GPIO_90 */ + "APQ_DEBUG1", + "APQ_DEBUG2", + "APQ_DEBUG3", + "TP165", + "NC", + "APQ_LNA_PWR_EN", + "NC", + "APQ_LCD_BL_EN", + "NC", + "APQ_LCD_ID0", /* GPIO_100 */ + "APQ_LCD_ID1", + "USBC_GPIO5_1V8", + "NC", + "NC", + "NC", + "APQ_HUB_RST_1V8_L", + "USBC_I2C_IRQ_1V8_L", + "SPE_PWR_EN", + "NC", + "APQ_USB_ID", /* GPIO_110 */ + "APQ_EXT_BUCK_VSEL", + "APQ_USB_ID_OUT", + "NC", + "PRNT_RST_L", + "APQ_CRQ_I2C_RDY_1V8", + "TYPEC_RST_1V8_H", + "CHG_BACKPWR_EN", + "CHG_PROCHOT_L", + "NC", + "USBC_GPIO7_1V8", /* GPIO_120 */ + "NC"; + + pinctrl_backlight: backlight-state { + pins = "gpio98"; + function = "gpio"; + }; + + pinctrl_lcd_avdd_reg: lcd-avdd-reg-state { + pins = "gpio86"; + function = "gpio"; + }; + + pinctrl_lcd_avee_reg: lcd-avee-reg-state { + pins = "gpio87"; + function = "gpio"; + }; + + pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state { + pins = "gpio9"; + function = "gpio"; + }; + + pinctrl_lcd_rst: lcd-rst-state { + pins = "gpio25"; + function = "gpio"; + }; + + pinctrl_otg_default: otg-default-state { + function = "gpio"; + pins = "gpio17"; + output-high; + }; + + pinctrl_otg_device: otg-device-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + pinctrl_otg_host: otg-host-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + typec_irq: typec-irq-state { + function = "gpio"; + pins = "gpio107"; + bias-pull-up; + input-enable; + }; +}; + +&usb { + pinctrl-names = "default", "host", "device"; + pinctrl-0 = <&pinctrl_otg_default>; + pinctrl-1 = <&pinctrl_otg_host>; + pinctrl-2 = <&pinctrl_otg_device>; + pin-switch-delay-us = <100000>; + usb-role-switch; + status = "okay"; + + port { + otg_ep: endpoint { + remote-endpoint = <&typec_ep>; + }; + }; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3680"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index b599909c4463..537547b97459 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -208,25 +208,6 @@ status = "okay"; }; -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - &hsusb_phy1 { status = "okay"; @@ -251,6 +232,25 @@ status = "okay"; }; +&mdss_hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active>; + pinctrl-1 = <&mdss_hdmi_hpd_suspend &mdss_hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&mdss_hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; @@ -433,28 +433,28 @@ drive-strength = <2>; }; - hdmi_hpd_active: hdmi-hpd-active-state { + mdss_hdmi_hpd_active: mdss_hdmi-hpd-active-state { pins = "gpio34"; function = "hdmi_hot"; bias-pull-down; drive-strength = <16>; }; - hdmi_hpd_suspend: hdmi-hpd-suspend-state { + mdss_hdmi_hpd_suspend: mdss_hdmi-hpd-suspend-state { pins = "gpio34"; function = "hdmi_hot"; bias-pull-down; drive-strength = <2>; }; - hdmi_ddc_active: hdmi-ddc-active-state { + mdss_hdmi_ddc_active: mdss_hdmi-ddc-active-state { pins = "gpio32", "gpio33"; function = "hdmi_ddc"; drive-strength = <2>; bias-pull-up; }; - hdmi_ddc_suspend: hdmi-ddc-suspend-state { + mdss_hdmi_ddc_suspend: mdss_hdmi-ddc-suspend-state { pins = "gpio32", "gpio33"; function = "hdmi_ddc"; drive-strength = <2>; @@ -1043,7 +1043,7 @@ }; }; - hdmi-dai-link { + mdss_hdmi-dai-link { link-name = "HDMI"; cpu { sound-dai = <&q6afedai HDMI_RX>; @@ -1054,7 +1054,7 @@ }; codec { - sound-dai = <&hdmi 0>; + sound-dai = <&mdss_hdmi 0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 71e0a500599c..ac6471d1db1f 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -26,7 +26,7 @@ v1p05: v1p05-regulator { compatible = "regulator-fixed"; - reglator-name = "v1p05"; + regulator-name = "v1p05"; regulator-always-on; regulator-boot-on; @@ -38,7 +38,7 @@ v12_poe: v12-poe-regulator { compatible = "regulator-fixed"; - reglator-name = "v12_poe"; + regulator-name = "v12_poe"; regulator-always-on; regulator-boot-on; @@ -92,15 +92,15 @@ status = "okay"; }; -&hdmi { +&mdss { status = "okay"; }; -&hdmi_phy { +&mdss_hdmi { status = "okay"; }; -&mdss { +&mdss_hdmi_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts index 3af1d5556950..3af1d5556950 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts new file mode 100644 index 000000000000..bcf3b31c20e3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP442 board device tree source + * + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.3"; + compatible = "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts new file mode 100644 index 000000000000..53c68d8c5e5d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP474 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9"; + compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default_state>; + pinctrl-names = "default"; + + button-wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + gpio_keys_default_state: gpio-keys-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index af4d97143bcf..8bfc2db44624 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -115,6 +115,16 @@ #size-cells = <2>; ranges; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz_mem: tz@4a600000 { reg = <0x0 0x4a600000 0x0 0x200000>; no-map; @@ -122,7 +132,7 @@ smem@4a800000 { compatible = "qcom,smem"; - reg = <0x0 0x4a800000 0x0 0x00100000>; + reg = <0x0 0x4a800000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 0>; @@ -135,6 +145,13 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + qfprom: efuse@a4000 { + compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x721>; + #address-cells = <1>; + #size-cells = <1>; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -219,6 +236,18 @@ status = "disabled"; }; + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_spi0: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b5000 0x600>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index f531797f2619..7355f266742a 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -91,6 +91,7 @@ firmware { scm { compatible = "qcom,scm-ipq6018", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; }; }; @@ -155,18 +156,28 @@ no-map; }; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz: memory@4a600000 { - reg = <0x0 0x4a600000 0x0 0x00400000>; + reg = <0x0 0x4a600000 0x0 0x400000>; no-map; }; smem_region: memory@4aa00000 { - reg = <0x0 0x4aa00000 0x0 0x00100000>; + reg = <0x0 0x4aa00000 0x0 0x100000>; no-map; }; q6_region: memory@4ab00000 { - reg = <0x0 0x4ab00000 0x0 0x05500000>; + reg = <0x0 0x4ab00000 0x0 0x5500000>; no-map; }; }; @@ -199,7 +210,7 @@ hwlocks = <&tcsr_mutex 0>; }; - soc: soc { + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x0 0xffffffff>; @@ -302,7 +313,14 @@ status = "disabled"; }; - prng: qrng@e1000 { + qfprom: efuse@a4000 { + compatible = "qcom,ipq6018-qfprom", "qcom,qfprom"; + reg = <0x0 0x000a4000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + prng: qrng@e3000 { compatible = "qcom,prng-ee"; reg = <0x0 0x000e3000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; @@ -441,7 +459,6 @@ #size-cells = <0>; reg = <0x0 0x078b5000 0x0 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -456,7 +473,6 @@ #size-cells = <0>; reg = <0x0 0x078b6000 0x0 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -572,7 +588,7 @@ #address-cells = <2>; #size-cells = <2>; interrupt-controller; - #interrupt-cells = <0x3>; + #interrupt-cells = <3>; reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 5b2c1986c8f4..68839acbd613 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -29,8 +29,8 @@ }; cpus { - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; @@ -86,29 +86,40 @@ #size-cells = <2>; ranges; + bootloader@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + smem@4ab00000 { compatible = "qcom,smem"; - reg = <0x0 0x4ab00000 0x0 0x00100000>; + reg = <0x0 0x4ab00000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 0>; }; memory@4ac00000 { + reg = <0x0 0x4ac00000 0x0 0x400000>; no-map; - reg = <0x0 0x4ac00000 0x0 0x00400000>; }; }; firmware { scm { compatible = "qcom,scm-ipq8074", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; }; }; - soc: soc { - #address-cells = <0x1>; - #size-cells = <0x1>; + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; @@ -322,9 +333,9 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 70>; - #gpio-cells = <0x2>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; serial_4_pins: serial4-state { pins = "gpio23", "gpio24"; @@ -382,6 +393,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq8074", "syscon"; + reg = <0x01937000 0x21000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -476,7 +492,6 @@ #size-cells = <0>; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -534,6 +549,20 @@ status = "disabled"; }; + blsp1_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -667,7 +696,7 @@ #address-cells = <1>; #size-cells = <1>; interrupt-controller; - #interrupt-cells = <0x3>; + #interrupt-cells = <3>; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; ranges = <0 0xb00a000 0xffd>; @@ -904,6 +933,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 4>; + + trips { + nss-top-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss0-thermal { @@ -911,6 +948,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 5>; + + trips { + nss-0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss1-thermal { @@ -918,6 +963,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 6>; + + trips { + nss-1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya0-thermal { @@ -925,6 +978,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 7>; + + trips { + wcss-phya0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya1-thermal { @@ -932,6 +993,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 8>; + + trips { + wcss-phya1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu0_thermal: cpu0-thermal { @@ -939,6 +1008,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 9>; + + trips { + cpu0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu1_thermal: cpu1-thermal { @@ -946,6 +1023,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 10>; + + trips { + cpu1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu2_thermal: cpu2-thermal { @@ -953,6 +1038,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 11>; + + trips { + cpu2-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu3_thermal: cpu3-thermal { @@ -960,6 +1053,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 12>; + + trips { + cpu3-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cluster_thermal: cluster-thermal { @@ -967,6 +1068,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 13>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb0-thermal { @@ -974,6 +1083,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 14>; + + trips { + wcss-phyb0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb1-thermal { @@ -981,6 +1098,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 15>; + + trips { + wcss-phyb1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts new file mode 100644 index 000000000000..2b093e02637b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP418 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2"; + compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 2c8430197ec0..2b3ed8d351f7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * IPQ9574 AL02-C7 board device tree source + * IPQ9574 RDP433 board device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. @@ -29,6 +29,25 @@ status = "okay"; }; +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + &sdhc_1 { pinctrl-0 = <&sdc_default_state>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts new file mode 100644 index 000000000000..c8fa54e1a62c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP449 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6"; + compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts new file mode 100644 index 000000000000..f01de6628c3b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP453 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts new file mode 100644 index 000000000000..6efae3426cb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP454 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; + compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 0ed19fbf7d87..f120c7c52351 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -6,8 +6,9 @@ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/qcom,ipq9574-gcc.h> / { @@ -16,12 +17,6 @@ #size-cells = <2>; clocks { - bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { - compatible = "fixed-clock"; - clock-frequency = <353000000>; - #clock-cells = <0>; - }; - sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -43,6 +38,10 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU1: cpu@1 { @@ -51,6 +50,10 @@ reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU2: cpu@2 { @@ -59,6 +62,10 @@ reg = <0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; CPU3: cpu@3 { @@ -67,6 +74,10 @@ reg = <0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq9574_s1>; }; L2_0: l2-cache { @@ -76,12 +87,60 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-ipq9574", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + memory@40000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ reg = <0x0 0x40000000 0x0 0x0>; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-936000000 { + opp-hz = /bits/ 64 <936000000>; + opp-microvolt = <725000>; + clock-latency-ns = <200000>; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <787500>; + clock-latency-ns = <200000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <862500>; + clock-latency-ns = <200000>; + }; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <200000>; + }; + }; + pmu { compatible = "arm,cortex-a73-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -97,10 +156,39 @@ #size-cells = <2>; ranges; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz_region: tz@4a600000 { reg = <0x0 0x4a600000 0x0 0x400000>; no-map; }; + + smem@4aa00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4aa00000 0x0 0x100000>; + hwlocks = <&tcsr_mutex 0>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-ipq9574"; + qcom,glink-channels = "rpm_requests"; + }; }; soc: soc@0 { @@ -109,6 +197,55 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x6000>; + }; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: efuse@a4000 { + compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x5a1>; + #address-cells = <1>; + #size-cells = <1>; + }; + + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + }; + + crypto: crypto@73a000 { + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq9574-tlmm"; reg = <0x01000000 0x300000>; @@ -132,7 +269,7 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board_clk>, <&sleep_clk>, - <&bias_pll_ubi_nc_clk>, + <0>, <0>, <0>, <0>, @@ -143,6 +280,17 @@ #power-domain-cells = <1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq9574", "syscon"; + reg = <0x01937000 0x21000>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x07805000 0x1000>; @@ -160,6 +308,36 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x2b000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart2: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b1000 0x200>; @@ -170,17 +348,174 @@ status = "disabled"; }; + blsp1_uart3: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b2000 0x200>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart4: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b3000 0x200>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart5: serial@78b4000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b4000 0x200>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi3: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi4: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ - <0x0b002000 0x1000>, /* GICC */ + <0x0b002000 0x2000>, /* GICC */ <0x0b001000 0x1000>, /* GICH */ - <0x0b004000 0x1000>; /* GICV */ + <0x0b004000 0x2000>; /* GICV */ #address-cells = <1>; #size-cells = <1>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; ranges = <0 0x0b00c000 0x3000>; v2m0: v2m@0 { @@ -202,6 +537,32 @@ }; }; + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq9574-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a73pll>, <&xo_board_clk>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a73pll: clock@b116000 { + compatible = "qcom,ipq9574-a73pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; @@ -261,6 +622,214 @@ }; }; + thermal-zones { + nss-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + nss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + ubi_0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + ubi_1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + ubi_2-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + ubi_3-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 11>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 12>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wcss-phyb-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 14>; + + trips { + wcss_phyb-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + top-glue-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 15>; + + trips { + top_glue-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 13cd9ad167df..5ad49fe999db 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -22,7 +22,9 @@ chassis-type = "tablet"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -39,14 +41,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -58,7 +60,7 @@ accelerometer@10 { compatible = "bosch,bmc150_accel"; reg = <0x10>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -89,10 +91,10 @@ compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l16>; iovcc-supply = <&pm8916_l6>; @@ -105,7 +107,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -114,24 +116,32 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - status = "okay"; }; &sdhc_2 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -153,110 +163,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -273,6 +180,13 @@ bias-pull-up; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index fecb69944cfa..1c43f3d6a0b4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,7 +32,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -42,7 +44,7 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; linux,default-trigger = "torch"; function = LED_FUNCTION_TORCH; }; @@ -50,13 +52,13 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -66,9 +68,9 @@ touchscreen@26 { compatible = "mstar,msg2638"; reg = <0x26>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_reset_default>; vdd-supply = <&pm8916_l17>; @@ -86,7 +88,7 @@ reg = <0x0c>; vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; mount-matrix = "0", "1", "0", @@ -99,7 +101,7 @@ reg = <0x0f>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; @@ -111,7 +113,7 @@ proximity@48 { compatible = "sensortek,stk3310"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&proximity_int_default>; @@ -122,7 +124,7 @@ reg = <0x68>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <97 IRQ_TYPE_EDGE_RISING>, <98 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -136,7 +138,7 @@ led-controller@68 { compatible = "si-en,sn3190"; reg = <0x68>; - shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&led_enable_default &led_shutdown_default>; #address-cells = <1>; @@ -156,26 +158,29 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -195,110 +200,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; function = "gpio"; @@ -370,6 +272,13 @@ bias-pull-up; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 91284a1d0966..92f695481769 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,14 +32,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; }; button-volume-down { label = "Volume Down"; - gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; }; @@ -49,7 +51,7 @@ regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; enable-active-high; startup-delay-us = <200>; @@ -60,7 +62,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -76,7 +78,7 @@ vdd-supply = <&pm8916_l8>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -86,7 +88,7 @@ compatible = "invensense,mpu6515"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <36 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -108,10 +110,10 @@ compatible = "edt,edt-ft5306"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l11>; iovcc-supply = <&pm8916_l6>; @@ -124,16 +126,19 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { @@ -141,9 +146,9 @@ vmmc-supply = <®_sd_vmmc>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -163,110 +168,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; function = "gpio"; @@ -299,6 +201,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { touch-pins { pins = "gpio13"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index 525ec76efeeb..f4dbc515c47a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -14,7 +14,9 @@ chassis-type = "tablet"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -24,8 +26,8 @@ flash-led-controller { /* Actually qcom,leds-gpio-flash */ compatible = "sgmicro,sgm3140"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&camera_flash_default>; pinctrl-names = "default"; @@ -45,7 +47,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -59,21 +61,21 @@ led-red { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_RED>; - gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; led-green { function = LED_FUNCTION_CHARGING; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&usb_id_default>; pinctrl-names = "default"; }; @@ -87,10 +89,10 @@ compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -105,7 +107,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -114,24 +116,27 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -153,110 +158,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; @@ -278,6 +180,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 5b1bac8f5122..4239c8fda11b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -26,7 +26,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -43,7 +45,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -55,21 +57,21 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_RED>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-1 { - gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-2 { - gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_BLUE>; default-state = "off"; function = LED_FUNCTION_INDICATOR; @@ -78,7 +80,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -94,7 +96,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -104,7 +106,7 @@ compatible = "kionix,kx023-1025"; reg = <0x1e>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -122,7 +124,7 @@ compatible = "avago,apds9930"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -146,7 +148,7 @@ regulator-name = "outp"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; @@ -154,7 +156,7 @@ regulator-name = "outn"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; }; @@ -169,7 +171,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -199,18 +201,18 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x28>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -218,32 +220,57 @@ status = "okay"; }; +&lpass_codec { + status = "okay"; +}; + +&pm8916_codec { + status = "okay"; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; /* - * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>. + * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>. * However, gpio38 does not change its state when inserting/removing the * SD card, it's just low all the time. The Huawei kernel seems to use * polling for SD card detection instead. @@ -255,7 +282,7 @@ * Maybe Huawei decided to replace the second SIM card slot with the * SD card slot and forgot to re-route to gpio38. */ - cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; }; &sound { @@ -268,8 +295,8 @@ "AMIC3", "MIC BIAS External1"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cdc_pdm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus>; + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; primary-dai-link { link-name = "WCD"; @@ -277,7 +304,7 @@ sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; }; }; @@ -287,7 +314,7 @@ sound-dai = <&lpass MI2S_TERTIARY>; }; codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; }; }; }; @@ -301,13 +328,6 @@ extcon = <&usb_id>; }; -&wcd_codec { - qcom,micbias-lvl = <2800>; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; - qcom,hphl-jack-type-normally-open; -}; - &wcnss { status = "okay"; }; @@ -316,110 +336,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_irq_default: accel-irq-default-state { pins = "gpio115"; function = "gpio"; @@ -476,7 +393,7 @@ bias-disable; }; - sdhc2_cd_default: sdhc2-cd-default-state { + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio56"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index f1dd625e1822..97262b8519b3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -14,7 +14,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -41,7 +43,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -53,7 +55,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -62,8 +64,8 @@ flash-led-controller { compatible = "sgmicro,sgm3140"; - flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -122,7 +124,7 @@ * to the BMC156. However, there are two pads next to the chip * that can be shorted to make it work if needed. * - * interrupt-parent = <&msmgpio>; + * interrupt-parent = <&tlmm>; * interrupts = <116 IRQ_TYPE_EDGE_RISING>; */ @@ -141,7 +143,7 @@ compatible = "bosch,bmc156_magn"; reg = <0x12>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -156,7 +158,7 @@ reg = <0x23>; proximity-near-level = <75>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -170,7 +172,7 @@ compatible = "bosch,bmg160"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <23 IRQ_TYPE_EDGE_RISING>, <22 IRQ_TYPE_EDGE_RISING>; @@ -191,7 +193,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <®_ctp>; @@ -214,7 +216,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -223,6 +225,13 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_usbin { status = "okay"; }; @@ -233,19 +242,10 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; }; @@ -267,110 +267,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio116"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index b79e80913af9..9757182fba3e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -13,13 +13,30 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { stdout-path = "serial0"; }; + flash-led-controller { + compatible = "ocs,ocp8110"; + enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_front_flash_default>; + pinctrl-names = "default"; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -30,7 +47,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -39,7 +56,7 @@ compatible = "gpio-leds"; led-0 { - gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_WHITE>; default-state = "off"; function = LED_FUNCTION_KBD_BACKLIGHT; @@ -51,7 +68,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +84,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -86,7 +103,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -95,26 +112,29 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -134,110 +154,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; function = "gpio"; @@ -246,6 +163,13 @@ bias-disable; }; + camera_front_flash_default: camera-front-flash-default-state { + pins = "gpio49", "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -262,6 +186,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index 7c0ceb3cff45..438eb1faee1d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -12,7 +12,7 @@ compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; aliases { - serial0 = &blsp1_uart2; + serial0 = &blsp_uart2; usid0 = &pm8916_0; }; @@ -21,6 +21,6 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi deleted file mode 100644 index 33dfcf318a81..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ /dev/null @@ -1,582 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. - */ - -&msmgpio { - - blsp1_uart1_default: blsp1-uart1-default-state { - /* TX, RX, CTS_N, RTS_N */ - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "blsp_uart1"; - - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart1_sleep: blsp1-uart1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp1_uart2_default: blsp1-uart2-default-state { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart2_sleep: blsp1-uart2-sleep-state { - pins = "gpio4", "gpio5"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi1_default: spi1-default-state { - spi-pins { - pins = "gpio0", "gpio1", "gpio3"; - function = "blsp_spi1"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio2"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi1_sleep: spi1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi2_default: spi2-default-state { - spi-pins { - pins = "gpio4", "gpio5", "gpio7"; - function = "blsp_spi2"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio6"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi2_sleep: spi2-sleep-state { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi3_default: spi3-default-state { - spi-pins { - pins = "gpio8", "gpio9", "gpio11"; - function = "blsp_spi3"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio10"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi3_sleep: spi3-sleep-state { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi4_default: spi4-default-state { - spi-pins { - pins = "gpio12", "gpio13", "gpio15"; - function = "blsp_spi4"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio14"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi4_sleep: spi4-sleep-state { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi5_default: spi5-default-state { - spi-pins { - pins = "gpio16", "gpio17", "gpio19"; - function = "blsp_spi5"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio18"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi5_sleep: spi5-sleep-state { - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - spi6_default: spi6-default-state { - spi-pins { - pins = "gpio20", "gpio21", "gpio23"; - function = "blsp_spi6"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio22"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - spi6_sleep: spi6-sleep-state { - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - i2c1_default: i2c1-default-state { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; - - drive-strength = <2>; - bias-disable; - }; - - i2c1_sleep: i2c1-sleep-state { - pins = "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c2_default: i2c2-default-state { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - - i2c2_sleep: i2c2-sleep-state { - pins = "gpio6", "gpio7"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c3_default: i2c3-default-state { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - - drive-strength = <2>; - bias-disable; - }; - - i2c3_sleep: i2c3-sleep-state { - pins = "gpio10", "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c4_default: i2c4-default-state { - pins = "gpio14", "gpio15"; - function = "blsp_i2c4"; - - drive-strength = <2>; - bias-disable; - }; - - i2c4_sleep: i2c4-sleep-state { - pins = "gpio14", "gpio15"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c5_default: i2c5-default-state { - pins = "gpio18", "gpio19"; - function = "blsp_i2c5"; - - drive-strength = <2>; - bias-disable; - }; - - i2c5_sleep: i2c5-sleep-state { - pins = "gpio18", "gpio19"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - i2c6_default: i2c6-default-state { - pins = "gpio22", "gpio23"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - - i2c6_sleep: i2c6-sleep-state { - pins = "gpio22", "gpio23"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - pmx-sdc1-clk-state { - sdc1_clk_on: clk-on-pins { - pins = "sdc1_clk"; - - bias-disable; - drive-strength = <16>; - }; - sdc1_clk_off: clk-off-pins { - pins = "sdc1_clk"; - - bias-disable; - drive-strength = <2>; - }; - }; - - pmx-sdc1-cmd-state { - sdc1_cmd_on: cmd-on-pins { - pins = "sdc1_cmd"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc1_cmd_off: cmd-off-pins { - pins = "sdc1_cmd"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc1-data-state { - sdc1_data_on: data-on-pins { - pins = "sdc1_data"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc1_data_off: data-off-pins { - pins = "sdc1_data"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-clk-state { - sdc2_clk_on: clk-on-pins { - pins = "sdc2_clk"; - - bias-disable; - drive-strength = <16>; - }; - sdc2_clk_off: clk-off-pins { - pins = "sdc2_clk"; - - bias-disable; - drive-strength = <2>; - }; - }; - - pmx-sdc2-cmd-state { - sdc2_cmd_on: cmd-on-pins { - pins = "sdc2_cmd"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc2_cmd_off: cmd-off-pins { - pins = "sdc2_cmd"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-data-state { - sdc2_data_on: data-on-pins { - pins = "sdc2_data"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc2_data_off: data-off-pins { - pins = "sdc2_data"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-cd-pin-state { - sdc2_cd_on: cd-on-pins { - pins = "gpio38"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - sdc2_cd_off: cd-off-pins { - pins = "gpio38"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - cdc-pdm-lines-state { - cdc_pdm_lines_act: pdm-lines-on-pins { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - - drive-strength = <8>; - bias-disable; - }; - cdc_pdm_lines_sus: pdm-lines-off-pins { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - - ext-pri-tlmm-lines-state { - ext_pri_tlmm_lines_act: ext-pa-on-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_pri_tlmm_lines_sus: ext-pa-off-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - ext-pri-ws-line-state { - ext_pri_ws_act: ext-pa-on-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - - drive-strength = <8>; - bias-disable; - }; - ext_pri_ws_sus: ext-pa-off-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - - drive-strength = <2>; - bias-disable; - }; - }; - - ext-mclk-tlmm-lines-state { - ext_mclk_tlmm_lines_act: mclk-lines-on-pins { - pins = "gpio116"; - function = "pri_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { - pins = "gpio116"; - function = "pri_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - /* secondary Mi2S */ - ext-sec-tlmm-lines-state { - ext_sec_tlmm_lines_act: tlmm-lines-on-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - cdc_dmic_lines_act: cdc-dmic-lines-on-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - - drive-strength = <8>; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - - drive-strength = <8>; - }; - }; - cdc_dmic_lines_sus: cdc-dmic-lines-off-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - - drive-strength = <2>; - bias-disable; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - - drive-strength = <2>; - bias-disable; - }; - }; - - wcnss_pin_a: wcnss-active-state { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - function = "wcss_wlan"; - - drive-strength = <6>; - bias-pull-up; - }; - - cci0_default: cci0-default-state { - pins = "gpio29", "gpio30"; - function = "cci_i2c"; - - drive-strength = <16>; - bias-disable; - }; - - camera_front_default: camera-front-default-state { - pwdn-pins { - pins = "gpio33"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio28"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - mclk1-pins { - pins = "gpio27"; - function = "cam_mclk1"; - - drive-strength = <16>; - bias-disable; - }; - }; - - camera_rear_default: camera-rear-default-state { - pwdn-pins { - pins = "gpio34"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio35"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - mclk0-pins { - pins = "gpio26"; - function = "cam_mclk0"; - - drive-strength = <16>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index 6eb5e0a39510..b1a7eafbee31 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -1,4 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-only +/* + * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections) + * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC. + * Many regulators have a fixed purpose in the original reference design and + * were rarely re-used for different purposes. Devices that deviate from the + * typical reference design should not make use of this include and instead add + * the necessary properties in the board-specific device tree. + */ #include "msm8916.dtsi" #include "pm8916.dtsi" @@ -7,12 +15,12 @@ vdda-supply = <&pm8916_l2>; }; -&dsi0 { +&mdss_dsi0 { vdda-supply = <&pm8916_l2>; vddio-supply = <&pm8916_l6>; }; -&dsi_phy0 { +&mdss_dsi0_phy { vddio-supply = <&pm8916_l6>; }; @@ -20,6 +28,12 @@ pll-supply = <&pm8916_l7>; }; +&pm8916_codec { + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; +}; + &sdhc_1 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -47,30 +61,97 @@ }; &rpm_requests { - smd_rpm_regulators: regulators { + pm8916_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ - pm8916_s3: s3 {}; - pm8916_s4: s4 {}; - pm8916_l1: l1 {}; - pm8916_l2: l2 {}; + pm8916_s3: s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; /* Needed for L2 */ + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; /* Needed for L5/L7 */ + }; + + /* + * Some of the regulators are unused or managed by another + * processor (e.g. the modem). We should still define nodes for + * them to ensure the vote from the application processor can be + * dropped in case the regulators are already on during boot. + * + * The labels for these nodes are omitted on purpose because + * boards should configure a proper voltage before using them. + */ + l1 {}; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; /* Needed for LPDDR RAM */ + }; + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ - pm8916_l4: l4 {}; - pm8916_l5: l5 {}; - pm8916_l6: l6 {}; - pm8916_l7: l7 {}; - pm8916_l8: l8 {}; - pm8916_l9: l9 {}; - pm8916_l10: l10 {}; - pm8916_l11: l11 {}; - pm8916_l12: l12 {}; - pm8916_l13: l13 {}; - pm8916_l14: l14 {}; - pm8916_l15: l15 {}; - pm8916_l16: l16 {}; - pm8916_l17: l17 {}; - pm8916_l18: l18 {}; + + l4 {}; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for most digital I/O */ + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for CPU PLL */ + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 {}; + + pm8916_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 {}; + l15 {}; + l16 {}; + l17 {}; + l18 {}; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 16d67749960e..019bf73178fa 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -8,7 +8,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -44,13 +46,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -65,7 +67,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -83,7 +85,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -96,7 +98,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -105,8 +107,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -118,7 +120,7 @@ compatible = "siliconmitus,sm5502-muic"; reg = <0x25>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -128,8 +130,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -142,7 +144,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; /* vcc/vdd-supply are board-specific */ @@ -157,8 +159,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -170,11 +172,11 @@ compatible = "samsung,s3fwrn5-i2c"; reg = <0x27>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>; - wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; @@ -200,7 +202,7 @@ accelerometer: accelerometer@10 { compatible = "bosch,bmc150_accel"; reg = <0x10>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -225,7 +227,7 @@ battery@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_BOTH>; pinctrl-names = "default"; @@ -233,41 +235,44 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&mdss_default>; pinctrl-1 = <&mdss_sleep>; }; -&mdss { - status = "okay"; -}; - &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -279,110 +284,7 @@ extcon = <&muic>; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -485,6 +387,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tkey_default: tkey-default-state { pins = "gpio98"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index a1ca4d883420..e5a569698c4f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -28,7 +28,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -41,7 +41,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -67,7 +67,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -85,7 +85,7 @@ status = "okay"; }; -&dsi0 { +&mdss_dsi0 { panel@0 { reg = <0>; @@ -93,17 +93,17 @@ vdd3-supply = <®_panel_vdd3>; vci-supply = <&pm8916_l17>; - reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { data-lanes = <0 1>; remote-endpoint = <&panel_in>; }; @@ -120,7 +120,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 4e10b8a5e9f9..388482a1e3d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -36,7 +36,7 @@ compatible = "melfas,mms345l"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <720>; @@ -71,7 +71,7 @@ compatible = "qcom,wcn3660b"; }; -&msmgpio { +&tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index f6c4a011fdfd..0cdd6af7817f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -18,7 +18,7 @@ compatible = "siliconmitus,sm5504-muic"; reg = <0x14>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -32,7 +32,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -66,7 +66,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 4cbd68b89448..3f145dde4059 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -33,7 +33,7 @@ function = LED_FUNCTION_KBD_BACKLIGHT; color = <LED_COLOR_ID_WHITE>; - gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&gpio_leds_default>; @@ -42,14 +42,14 @@ }; ®_motor_vdd { - gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; }; ®_touch_key { status = "disabled"; }; -&msmgpio { +&tlmm { gpio_leds_default: gpio-led-default-state { pins = "gpio60"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 74ffd04db8d8..7943bb619116 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -9,7 +9,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -34,13 +36,13 @@ volume-up-button { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; home-button { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -55,7 +57,7 @@ hall-sensor-switch { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -74,7 +76,7 @@ maxim,over-heat-temp = <600>; maxim,over-volt = <4400>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&fuelgauge_int_default>; @@ -97,7 +99,7 @@ vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l5>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "INT1"; @@ -111,7 +113,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -120,25 +122,28 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + /* FIXME: Replace with MAX77849 MUIC when driver is available */ &pm8916_usbin { status = "okay"; }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -162,110 +167,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -293,4 +195,11 @@ drive-strength = <2>; bias-disable; }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index 607a5dc8a534..48111c6a2c78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -25,7 +25,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <&motor_en_default>; @@ -38,7 +38,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <&tsp_en_default>; @@ -51,7 +51,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -71,20 +71,20 @@ touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <®_tsp_1p8v>; vdda-supply = <®_tsp_3p3v>; - reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; pinctrl-0 = <&tsp_int_rst_default>; pinctrl-names = "default"; }; }; -&msmgpio { +&tlmm { motor_en_default: motor-en-default-state { pins = "gpio76"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 5d6f8383306b..98ceaad7fcea 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <®_tsp_en_default>; @@ -24,7 +24,7 @@ vibrator { compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&vibrator_en_default>; pinctrl-names = "default"; @@ -37,7 +37,7 @@ touchscreen@20 { compatible = "zinitix,bt532"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <768>; @@ -51,7 +51,7 @@ }; }; -&msmgpio { +&tlmm { reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index adeee0830e76..f4fd5d72b28b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -7,7 +7,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -32,7 +34,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -49,21 +51,21 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home Key"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; i2c_muic: i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -75,7 +77,7 @@ compatible = "siliconmitus,sm5703-muic"; reg = <0x25>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -84,7 +86,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -95,20 +97,16 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -128,110 +126,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -263,4 +158,11 @@ drive-strength = <2>; bias-disable; }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 1a41a4db874d..15dc246e84e2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -28,7 +28,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -53,13 +55,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -74,7 +76,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -87,7 +89,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -100,7 +102,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -113,7 +115,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -122,8 +124,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -135,7 +137,7 @@ compatible = "siliconmitus,sm5504-muic"; reg = <0x14>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -145,8 +147,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -158,7 +160,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <®_touch_key>; @@ -174,8 +176,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -187,11 +189,11 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x2b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; @@ -206,7 +208,7 @@ compatible = "st,lsm6ds3"; reg = <0x6b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -230,7 +232,7 @@ compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -245,7 +247,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -259,7 +261,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -274,19 +276,10 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; /* @@ -320,110 +313,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts index 82e260375174..6fe1850ba20e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; &led_r { - gpios = <&msmgpio 82 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 83 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 81 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 978f0abcdf8f..16d4a91022be 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; }; &led_r { - gpios = <&msmgpio 22 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; }; &mpss { @@ -40,7 +40,7 @@ }; /* This selects the external SIM card slot by default */ -&msmgpio { +&tlmm { sim_ctrl_default: sim-ctrl-default-state { esim-sel-pins { pins = "gpio0", "gpio3"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index 50bae6f214f1..004a129a2ee2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -9,7 +9,8 @@ chassis-type = "embedded"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + serial0 = &blsp_uart2; }; chosen { @@ -82,11 +83,11 @@ status = "okay"; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; -/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */ +/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */ &gcc { clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; }; @@ -100,16 +101,12 @@ }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &usb { extcon = <&pm8916_usbin>; - dr_mode = "peripheral"; + usb-role-switch; status = "okay"; }; @@ -126,110 +123,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { /* pins are board-specific */ button_default: button-default-state { function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index ac56c7595f78..c94d36b38651 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -16,7 +16,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -25,8 +27,8 @@ flash-led-controller { compatible = "ocs,ocp8110"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -47,14 +49,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +69,7 @@ compatible = "invensense,mpu6880"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -90,10 +92,10 @@ compatible = "edt,edt-ft5506"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -140,7 +142,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -149,25 +151,32 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + /* + * L16 is only used for AW2013 which is fine with 2.5-3.3V. + * Use the recommended typical voltage of 2.8V as minimum. + */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; }; @@ -188,110 +197,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts index 74ce6563be18..5e6ba8c58bb5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -10,19 +10,19 @@ }; &button_restart { - gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; }; &led_r { - gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; }; &led_g { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; }; &led_b { - gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 834e0b66b7f2..7582c7d748fe 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -18,11 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - }; - chosen { }; memory@80000000 { @@ -993,15 +988,494 @@ }; }; - msmgpio: pinctrl@1000000 { + tlmm: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x01000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&msmgpio 0 0 122>; + gpio-ranges = <&tlmm 0 0 122>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + blsp_i2c1_default: blsp-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c1_sleep: blsp-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_default: blsp-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_sleep: blsp-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_default: blsp-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_sleep: blsp-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_default: blsp-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_sleep: blsp-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_default: blsp-i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_sleep: blsp-i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_default: blsp-i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_sleep: blsp-i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_spi1_default: blsp-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi1_sleep: blsp-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi2_default: blsp-spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi2_sleep: blsp-spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi3_default: blsp-spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi3_sleep: blsp-spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi4_default: blsp-spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi4_sleep: blsp-spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi5_default: blsp-spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi5_sleep: blsp-spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi6_default: blsp-spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi6_sleep: blsp-spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart1_default: blsp-uart1-default-state { + /* TX, RX, CTS_N, RTS_N */ + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart1_sleep: blsp-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart2_default: blsp-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart2_sleep: blsp-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_dmic_default: cdc-dmic-default-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_sleep: cdc-dmic-sleep-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + cdc_pdm_default: cdc-pdm-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_sleep: cdc-pdm-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + pri_mi2s_default: mi2s-pri-default-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_sleep: mi2s-pri-sleep-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_ws_default: mi2s-pri-ws-default-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + + sec_mi2s_default: mi2s-sec-default-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + sec_mi2s_sleep: mi2s-sec-sleep-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + wcss_wlan_default: wcss-wlan-default-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; }; gcc: clock-controller@1800000 { @@ -1012,8 +1486,8 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board>, <&sleep_clk>, - <&dsi_phy0 1>, - <&dsi_phy0 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, <0>, <0>, <0>; @@ -1062,7 +1536,7 @@ #size-cells = <1>; ranges; - mdp: display-controller@1a01000 { + mdss_mdp: display-controller@1a01000 { compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; @@ -1087,14 +1561,14 @@ port@0 { reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + mdss_mdp_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; }; }; }; }; - dsi0: dsi@1a98000 { + mdss_dsi0: dsi@1a98000 { compatible = "qcom,msm8916-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a98000 0x25c>; @@ -1105,8 +1579,8 @@ assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -1120,7 +1594,7 @@ "byte", "pixel", "core"; - phys = <&dsi_phy0>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -1131,20 +1605,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi_phy0: phy@1a98300 { + mdss_dsi0_phy: phy@1a98300 { compatible = "qcom,dsi-phy-28nm-lp"; reg = <0x01a98300 0xd4>, <0x01a98500 0x280>, @@ -1162,7 +1636,7 @@ }; }; - camss: camss@1b00000 { + camss: camss@1b0ac00 { compatible = "qcom,msm8916-camss"; reg = <0x01b0ac00 0x200>, <0x01b00030 0x4>, @@ -1520,20 +1994,20 @@ * Primary/Secondary MI2S both use the PRI_I2S_CLK. */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; clock-names = "ahbix-clk", - "pcnoc-mport-clk", - "pcnoc-sway-clk", "mi2s-bit-clk0", "mi2s-bit-clk1", "mi2s-bit-clk2", - "mi2s-bit-clk3"; + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; #sound-dai-cells = <1>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; @@ -1552,9 +2026,10 @@ <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "ahbix-clk", "mclk"; #sound-dai-cells = <1>; + status = "disabled"; }; - sdhc_1: mmc@7824000 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc", "core"; @@ -1566,13 +2041,16 @@ <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; mmc-ddr-1_8v; bus-width = <8>; non-removable; status = "disabled"; }; - sdhc_2: mmc@7864000 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc", "core"; @@ -1584,6 +2062,9 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; bus-width = <4>; status = "disabled"; }; @@ -1598,7 +2079,7 @@ qcom,ee = <0>; }; - blsp1_uart1: serial@78af000 { + blsp_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; @@ -1607,12 +2088,12 @@ dmas = <&blsp_dma 0>, <&blsp_dma 1>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; + pinctrl-0 = <&blsp_uart1_default>; + pinctrl-1 = <&blsp_uart1_sleep>; status = "disabled"; }; - blsp1_uart2: serial@78b0000 { + blsp_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b0000 0x200>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; @@ -1621,8 +2102,8 @@ dmas = <&blsp_dma 2>, <&blsp_dma 3>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-0 = <&blsp_uart2_default>; + pinctrl-1 = <&blsp_uart2_sleep>; status = "disabled"; }; @@ -1636,8 +2117,8 @@ dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_default>; - pinctrl-1 = <&i2c1_sleep>; + pinctrl-0 = <&blsp_i2c1_default>; + pinctrl-1 = <&blsp_i2c1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1653,8 +2134,8 @@ dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi1_default>; - pinctrl-1 = <&spi1_sleep>; + pinctrl-0 = <&blsp_spi1_default>; + pinctrl-1 = <&blsp_spi1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1670,8 +2151,8 @@ dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_default>; - pinctrl-1 = <&i2c2_sleep>; + pinctrl-0 = <&blsp_i2c2_default>; + pinctrl-1 = <&blsp_i2c2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1687,8 +2168,8 @@ dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi2_default>; - pinctrl-1 = <&spi2_sleep>; + pinctrl-0 = <&blsp_spi2_default>; + pinctrl-1 = <&blsp_spi2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1704,8 +2185,8 @@ dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c3_default>; - pinctrl-1 = <&i2c3_sleep>; + pinctrl-0 = <&blsp_i2c3_default>; + pinctrl-1 = <&blsp_i2c3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1721,8 +2202,8 @@ dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi3_default>; - pinctrl-1 = <&spi3_sleep>; + pinctrl-0 = <&blsp_spi3_default>; + pinctrl-1 = <&blsp_spi3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1738,8 +2219,8 @@ dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c4_default>; - pinctrl-1 = <&i2c4_sleep>; + pinctrl-0 = <&blsp_i2c4_default>; + pinctrl-1 = <&blsp_i2c4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1755,8 +2236,8 @@ dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi4_default>; - pinctrl-1 = <&spi4_sleep>; + pinctrl-0 = <&blsp_spi4_default>; + pinctrl-1 = <&blsp_spi4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1772,8 +2253,8 @@ dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; + pinctrl-0 = <&blsp_i2c5_default>; + pinctrl-1 = <&blsp_i2c5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1789,8 +2270,8 @@ dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi5_default>; - pinctrl-1 = <&spi5_sleep>; + pinctrl-0 = <&blsp_spi5_default>; + pinctrl-1 = <&blsp_spi5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1806,8 +2287,8 @@ dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c6_default>; - pinctrl-1 = <&i2c6_sleep>; + pinctrl-0 = <&blsp_i2c6_default>; + pinctrl-1 = <&blsp_i2c6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1823,8 +2304,8 @@ dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi6_default>; - pinctrl-1 = <&spi6_sleep>; + pinctrl-0 = <&blsp_spi6_default>; + pinctrl-1 = <&blsp_spi6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1871,7 +2352,7 @@ }; }; - wcnss: remoteproc@a21b000 { + wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1893,7 +2374,7 @@ qcom,smem-state-names = "stop"; pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; + pinctrl-0 = <&wcss_wlan_default>; status = "disabled"; @@ -2190,5 +2671,3 @@ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; - -#include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi new file mode 100644 index 000000000000..adb96cd8d643 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * msm8939-pm8916.dtsi describes common properties (e.g. regulator connections) + * that apply to most devices that make use of the MSM8939 SoC and PM8916 PMIC. + * Many regulators have a fixed purpose in the original reference design and + * were rarely re-used for different purposes. Devices that deviate from the + * typical reference design should not make use of this include and instead add + * the necessary properties in the board-specific device tree. + */ + +#include "msm8939.dtsi" +#include "pm8916.dtsi" + +&mdss_dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi0_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&pm8916_codec { + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; +}; + +&rpm_requests { + pm8916_rpm_regulators: regulators { + compatible = "qcom,rpm-pm8916-regulators"; + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */ + /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */ + pm8916_s3: s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; /* Needed for L2 */ + }; + pm8916_s4: s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; /* Needed for L5/L7 */ + }; + + /* + * Some of the regulators are unused or managed by another + * processor (e.g. the modem). We should still define nodes for + * them to ensure the vote from the application processor can be + * dropped in case the regulators are already on during boot. + * + * The labels for these nodes are omitted on purpose because + * boards should configure a proper voltage before using them. + */ + l1 {}; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; /* Needed for LPDDR RAM */ + }; + + /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */ + + l4 {}; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for most digital I/O */ + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for CPU PLL */ + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 {}; + + pm8916_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 {}; + l15 {}; + l16 {}; + l17 {}; + l18 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts new file mode 100644 index 000000000000..8613cf93dac5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023, Bryan O'Donoghue. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia M4 Aqua"; + compatible = "sony,kanuti-tulip", "qcom,msm8939"; + + qcom,board-id = <QCOM_BOARD_ID_MTP 0>; + qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi new file mode 100644 index 000000000000..895cafc11480 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -0,0 +1,2436 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,gcc-msm8939.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,msm8939.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,gcc-msm8939.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + /* + * Stock LK wants address-cells/size-cells = 2 + * A number of our drivers want address/size cells = 1 + * hence the disparity between top-level and /soc below. + */ + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x100>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x101>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU2: cpu@102 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x102>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU3: cpu@103 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x103>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU4: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x0>; + qcom,acc = <&acc4>; + qcom,saw = <&saw4>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x1>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc5>; + qcom,saw = <&saw5>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU6: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x2>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc6>; + qcom,saw = <&saw6>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU7: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x3>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc7>; + qcom,saw = <&saw7>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + idle-states { + CPU_SLEEP_0: cpu-sleep-0 { + compatible ="qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <130>; + exit-latency-us = <150>; + min-residency-us = <2000>; + local-timer-stop; + }; + }; + }; + + /* + * MSM8939 has a big.LITTLE heterogeneous computing architecture, + * consisting of two clusters of four ARM Cortex-A53s each. The + * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs + * at 1.5-1.7GHz. + * + * The enable method used here is spin-table which presupposes use + * of a 2nd stage boot shim such as lk2nd to have installed a + * spin-table, the downstream non-psci/non-spin-table method that + * default msm8916/msm8936/msm8939 will not be supported upstream. + */ + cpu-map { + /* LITTLE (efficiency) cluster */ + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + /* big (performance) cluster */ + /* Boot CPU is cluster 1 core 0 */ + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz-apps@86000000 { + reg = <0x0 0x86000000 0x0 0x300000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + hypervisor@86400000 { + reg = <0x0 0x86400000 0x0 0x100000>; + no-map; + }; + + tz@86500000 { + reg = <0x0 0x86500000 0x0 0x180000>; + no-map; + }; + + reserved@86680000 { + reg = <0x0 0x86680000 0x0 0x80000>; + no-map; + }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + + rfsa@867e0000 { + reg = <0x0 0x867e0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + wcnss_mem: wcnss@8bd00000 { + reg = <0x0 0x8bd00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c300000 { + reg = <0x0 0x8c300000 0x0 0x800000>; + no-map; + }; + + mba_mem: mba@8cb00000 { + reg = <0x0 0x8cb00000 0x0 0x100000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs1_mbox 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8936"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8939-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1_mbox 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1_mbox 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs1_mbox 8 13>; + qcom,ipc-3 = <&apcs1_mbox 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; + reg = <0x0005c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@a0 { + reg = <0xa0 0x1>; + bits = <0 8>; + }; + + tsens_s6_p1: s6-p1@a1 { + reg = <0xa1 0x1>; + bits = <0 6>; + }; + + tsens_s6_p2: s6-p2@a1 { + reg = <0xa1 0x2>; + bits = <6 6>; + }; + + tsens_s7_p1: s7-p1@a2 { + reg = <0xa2 0x2>; + bits = <4 6>; + }; + + tsens_s7_p2: s7-p2@a3 { + reg = <0xa3 0x1>; + bits = <2 6>; + }; + + tsens_s8_p1: s8-p1@a4 { + reg = <0xa4 0x1>; + bits = <0 6>; + }; + + tsens_s8_p2: s8-p2@a4 { + reg = <0xa4 0x2>; + bits = <6 6>; + }; + + tsens_s9_p1: s9-p1@a5 { + reg = <0xa5 0x2>; + bits = <4 6>; + }; + + tsens_s9_p2: s9-p2@a6 { + reg = <0xa6 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@a7 { + reg = <0xa7 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@d0 { + reg = <0xd0 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@d1 { + reg = <0xd1 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@d4 { + reg = <0xd4 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@d5 { + reg = <0xd5 0x2>; + bits = <5 6>; + }; + + tsens_s5_p1: s5-p1@d6 { + reg = <0xd6 0x2>; + bits = <3 6>; + }; + + tsens_s5_p2: s5-p2@d7 { + reg = <0xd7 0x1>; + bits = <1 6>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8939-bimc"; + reg = <0x00400000 0x62000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + #interconnect-cells = <1>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2"; + #qcom,sensors = <9>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8939-pcnoc"; + reg = <0x00500000 0x11000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + #interconnect-cells = <1>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8939-snoc"; + reg = <0x00580000 0x14080>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + #interconnect-cells = <1>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>, + <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>; + #interconnect-cells = <1>; + }; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp_i2c1_default: blsp-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c1_sleep: blsp-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_default: blsp-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_sleep: blsp-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_default: blsp-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_sleep: blsp-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_default: blsp-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_sleep: blsp-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_default: blsp-i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_sleep: blsp-i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_default: blsp-i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_sleep: blsp-i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_spi1_default: blsp-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi1_sleep: blsp-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi2_default: blsp-spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi2_sleep: blsp-spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi3_default: blsp-spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi3_sleep: blsp-spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi4_default: blsp-spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi4_sleep: blsp-spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi5_default: blsp-spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi5_sleep: blsp-spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi6_default: blsp-spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi6_sleep: blsp-spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart1_default: blsp-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart1_sleep: blsp-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart2_default: blsp-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart2_sleep: blsp-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_dmic_default: cdc-dmic-default-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_sleep: cdc-dmic-sleep-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + cdc_pdm_default: cdc-pdm-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_sleep: cdc-pdm-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + pri_mi2s_default: mi2s-pri-default-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_sleep: mi2s-pri-sleep-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_ws_default: mi2s-pri-ws-default-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + + sec_mi2s_default: mi2s-sec-default-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + sec_mi2s_sleep: mi2s-sec-sleep-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + wcss_wlan_default: wcss-wlan-default-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8939"; + reg = <0x01800000 0x80000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_mdp_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdss_mdp_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a98000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + phys = <&mdss_dsi0_phy>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + + mdss_dsi1: dsi@1aa0000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01aa0000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + phys = <&mdss_dsi1_phy>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdss_mdp_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@1aa0300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01aa0300 0xd4>, + <0x01aa0500 0x280>, + <0x01aa0780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-405.0", "qcom,adreno"; + reg = <0x01c00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d", + "rbbmtimer"; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>, + <&gcc GCC_OXILI_TIMER_CLK>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + }; + + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + apps_iommu: iommu@1ef0000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + reg = <0x01ef0000 0x3000>; + ranges = <0 0x01e20000 0x40000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <17>; + + /* mdp_0: */ + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* venus_ns: */ + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpu_iommu: iommu@1f08000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>, + <&gcc GCC_GFX_TBU_CLK>; + clock-names = "iface", "bus", "tbu"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <18>; + + /* gfx3d_user: */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d_priv: */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil"; + reg = <0x04080000 0x100>, <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "xo"; + power-domains = <&rpmpd MSM8939_VDDMDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + resets = <&scm 0>; + reset-names = "mss_restart"; + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + mboxes = <&apcs1_mbox 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + }; + }; + + sound: sound@7702000 { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, + <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + status = "disabled"; + }; + + lpass: audio-controller@7708000 { + compatible = "qcom,apq8016-lpass-cpu"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; + clock-names = "ahbix-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_uart1_default>; + pinctrl-1 = <&blsp_uart1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_uart2_default>; + pinctrl-1 = <&blsp_uart2_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c1_default>; + pinctrl-1 = <&blsp_i2c1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi1_default>; + pinctrl-1 = <&blsp_spi1_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c2_default>; + pinctrl-1 = <&blsp_i2c2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi2_default>; + pinctrl-1 = <&blsp_spi2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c3_default>; + pinctrl-1 = <&blsp_i2c3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi3_default>; + pinctrl-1 = <&blsp_spi3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c4_default>; + pinctrl-1 = <&blsp_i2c4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi4_default>; + pinctrl-1 = <&blsp_spi4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c5_default>; + pinctrl-1 = <&blsp_i2c5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi5_default>; + pinctrl-1 = <&blsp_spi5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_i2c6_default>; + pinctrl-1 = <&blsp_i2c6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp_spi6_default>; + pinctrl-1 = <&blsp_spi6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + #reset-cells = <1>; + phy_type = "ulpi"; + dr_mode = "otg"; + adp-disable; + hnp-disable; + srp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + #phy-cells = <0>; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + power-domains = <&rpmpd MSM8939_VDDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcss_wlan_default>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 1>; + qcom,ipc = <&apcs1_mbox 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, + <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apcs1_mbox: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + assigned-clocks = <&apcs2>; + assigned-clock-rates = <297600000>; + #mbox-cells = <1>; + }; + + a53pll_c1: clock@b016000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + }; + + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>; + }; + + saw0: power-manager@b089000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + }; + + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>; + }; + + saw1: power-manager@b099000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + }; + + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>; + }; + + saw2: power-manager@b0a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + }; + + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>; + }; + + saw3: power-manager@b0b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + }; + + apcs0_mbox: mailbox@b111000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b111000 0x1000>; + clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + + a53pll_c0: clock@b116000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + acc4: clock-controller@b188000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b188000 0x1000>; + }; + + saw4: power-manager@b189000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b189000 0x1000>; + }; + + acc5: clock-controller@b198000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b198000 0x1000>; + }; + + saw5: power-manager@b199000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b199000 0x1000>; + }; + + acc6: clock-controller@b1a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1a8000 0x1000>; + }; + + saw6: power-manager@b1a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1a9000 0x1000>; + }; + + acc7: clock-controller@b1b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1b8000 0x1000>; + }; + + saw7: power-manager@b1b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1b9000 0x1000>; + }; + + a53pll_cci: clock@b1d0000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b1d0000 0x40>; + #clock-cells = <0>; + }; + + apcs2: mailbox@b1d1000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b1d1000 0x1000>; + clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4567-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + cpu4567_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4567_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4567_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modem2_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index d44cfa0471e9..b711cf9a6dc0 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -766,10 +766,10 @@ #power-domain-cells = <1>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>; + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>; clock-names = "xo", "sleep", "dsi0pll", @@ -851,20 +851,20 @@ port@0 { reg = <0>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@1 { reg = <1>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; - dsi0: dsi@1a94000 { + mdss_dsi0: dsi@1a94000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a94000 0x400>; reg-names = "dsi_ctrl"; @@ -874,8 +874,8 @@ assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, - <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -890,7 +890,7 @@ "pixel", "core"; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -903,20 +903,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@1a94400 { + mdss_dsi0_phy: phy@1a94400 { compatible = "qcom,dsi-phy-14nm-8953"; reg = <0x01a94400 0x100>, <0x01a94500 0x300>, @@ -934,7 +934,7 @@ status = "disabled"; }; - dsi1: dsi@1a96000 { + mdss_dsi1: dsi@1a96000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a96000 0x400>; reg-names = "dsi_ctrl"; @@ -944,8 +944,8 @@ assigned-clocks = <&gcc BYTE1_CLK_SRC>, <&gcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, - <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -960,7 +960,7 @@ "pixel", "core"; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -970,20 +970,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@1a96400 { + mdss_dsi1_phy: phy@1a96400 { compatible = "qcom,dsi-phy-14nm-8953"; reg = <0x01a96400 0x100>, <0x01a96500 0x300>, @@ -1002,7 +1002,7 @@ }; }; - apps_iommu: iommu@1e00000 { + apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01e20000 0x20000>; @@ -1276,6 +1276,19 @@ }; }; + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + uart_0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -1294,6 +1307,8 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_1_default>; @@ -1312,6 +1327,8 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_2_default>; @@ -1330,6 +1347,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_3_default>; pinctrl-1 = <&i2c_3_sleep>; @@ -1347,6 +1367,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_4_default>; pinctrl-1 = <&i2c_4_sleep>; @@ -1357,6 +1380,19 @@ status = "disabled"; }; + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1f000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + i2c_5: i2c@7af5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af5000 0x600>; @@ -1364,6 +1400,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_5_default>; pinctrl-1 = <&i2c_5_sleep>; @@ -1381,6 +1420,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_6_default>; pinctrl-1 = <&i2c_6_sleep>; @@ -1398,6 +1440,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_7_default>; pinctrl-1 = <&i2c_7_sleep>; @@ -1415,6 +1460,9 @@ clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_8_default>; pinctrl-1 = <&i2c_8_sleep>; @@ -1425,7 +1473,7 @@ status = "disabled"; }; - wcnss: remoteproc@a21b000 { + wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v3-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1507,8 +1555,8 @@ timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; - #address-cells = <0x01>; - #size-cells = <0x01>; + #address-cells = <1>; + #size-cells = <1>; ranges; frame@b121000 { diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index f47fb8ea71e2..753b9a2105ed 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -822,7 +822,7 @@ #interrupt-cells = <4>; }; - sdhc_1: mmc@7824000 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x500>, <0x07824000 0x800>; reg-names = "hc", "core"; @@ -838,7 +838,7 @@ status = "disabled"; }; - sdhc_2: mmc@7864000 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc", "core"; @@ -957,7 +957,7 @@ #reset-cells = <1>; }; - sdhc_3: mmc@7a24000 { + sdhc_3: mmc@7a24900 { compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07a24900 0x11c>, <0x07a24000 0x800>; reg-names = "hc", "core"; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index bdc3f2ba1755..5a7923d7c62a 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -342,8 +342,7 @@ }; }; - soc: soc { - + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -747,7 +746,7 @@ reg = <0xfc4ab000 0x4>; }; - spmi_bus: spmi@fc4c0000 { + spmi_bus: spmi@fc4cf000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xfc4cf000 0x1000>, <0xfc4cb000 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 596ad4c896f5..495d45a16e63 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -24,10 +24,10 @@ status = "okay"; }; -&hdmi { +&mdss_hdmi { status = "okay"; }; -&hdmi_phy { +&mdss_hdmi_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 2adadc1e5b7c..ec5457508fe6 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -164,21 +164,6 @@ vdda-supply = <&vreg_l2a_1p25>; }; -&dsi0 { - vdda-supply = <&vreg_l2a_1p25>; - vcca-supply = <&vreg_l22a_3p0>; - status = "okay"; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vcca-supply = <&vreg_l28a_0p925>; - status = "okay"; -}; - &hsusb_phy1 { vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; @@ -201,6 +186,21 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l22a_3p0>; + status = "okay"; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&vreg_l28a_0p925>; + status = "okay"; +}; + &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 7f4d493a55ff..b4b770a9277d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -11,6 +11,7 @@ #include "pmi8996.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> @@ -605,6 +606,34 @@ }; }; +&pmi8994_lpg { + qcom,power-source = <1>; + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &pmi8994_spmi_regulators { vdd_gfx: pmi8994_s2: s2 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 1ce5df0a3405..47f55c7311e9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -235,7 +235,15 @@ }; }; -&dsi0 { +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdd-supply = <&vreg_l2a_1p25>; @@ -246,26 +254,18 @@ pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; }; -&dsi0_out { +&mdss_dsi0_out { status = "okay"; data-lanes = <0 1 2 3>; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vcca-supply = <&vreg_l28a_0p925>; }; -&gpu { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 100123d51494..bdedcf9dff03 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -93,7 +93,13 @@ }; -&dsi0 { +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&mdss_dsi0 { status = "okay"; vdd-supply = <&vreg_l2a_1p25>; @@ -112,22 +118,16 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&panel_in>; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; - }; -}; - &pmi8994_wled { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 30257c07e127..0cb2d4f08c3a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -606,7 +606,7 @@ }; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -889,16 +889,16 @@ #power-domain-cells = <1>; reg = <0x008c0000 0x40000>; clocks = <&xo_board>, - <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, <&gcc GPLL0>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>, - <&hdmi_phy>; + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_hdmi_phy>; clock-names = "xo", - "gcc_mmss_noc_cfg_ahb_clk", "gpll0", + "gcc_mmss_noc_cfg_ahb_clk", "dsi0pll", "dsi0pllbyte", "dsi1pll", @@ -980,27 +980,27 @@ port@0 { reg = <0>; mdp5_intf3_out: endpoint { - remote-endpoint = <&hdmi_in>; + remote-endpoint = <&mdss_hdmi_in>; }; }; port@1 { reg = <1>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@2 { reg = <2>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; - dsi0: dsi@994000 { + mdss_dsi0: dsi@994000 { compatible = "qcom,msm8996-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x00994000 0x400>; @@ -1024,9 +1024,9 @@ "pixel", "core"; assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; #address-cells = <1>; @@ -1038,20 +1038,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@994400 { + mdss_dsi0_phy: phy@994400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00994400 0x100>, <0x00994500 0x300>, @@ -1068,7 +1068,7 @@ status = "disabled"; }; - dsi1: dsi@996000 { + mdss_dsi1: dsi@996000 { compatible = "qcom,msm8996-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x00996000 0x400>; @@ -1092,9 +1092,9 @@ "pixel", "core"; assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; #address-cells = <1>; @@ -1106,20 +1106,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@996400 { + mdss_dsi1_phy: phy@996400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00996400 0x100>, <0x00996500 0x300>, @@ -1136,8 +1136,8 @@ status = "disabled"; }; - hdmi: hdmi-tx@9a0000 { - compatible = "qcom,hdmi-tx-8996"; + mdss_hdmi: mdss_hdmi-tx@9a0000 { + compatible = "qcom,mdss_hdmi-tx-8996"; reg = <0x009a0000 0x50c>, <0x00070000 0x6158>, <0x009e0000 0xfff>; @@ -1160,7 +1160,7 @@ "alt_iface", "extp"; - phys = <&hdmi_phy>; + phys = <&mdss_hdmi_phy>; #sound-dai-cells = <1>; status = "disabled"; @@ -1171,16 +1171,16 @@ port@0 { reg = <0>; - hdmi_in: endpoint { + mdss_hdmi_in: endpoint { remote-endpoint = <&mdp5_intf3_out>; }; }; }; }; - hdmi_phy: phy@9a0600 { + mdss_hdmi_phy: phy@9a0600 { #phy-cells = <0>; - compatible = "qcom,hdmi-phy-8996"; + compatible = "qcom,mdss_hdmi-phy-8996"; reg = <0x009a0600 0x1c4>, <0x009a0a00 0x124>, <0x009a0c00 0x124>, @@ -1832,7 +1832,7 @@ compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0xffffffff>; pcie0: pcie@600000 { compatible = "qcom,pcie-msm8996"; @@ -2069,7 +2069,7 @@ }; }; - camss: camss@a00000 { + camss: camss@a34000 { compatible = "qcom,msm8996-camss"; reg = <0x00a34000 0x1000>, <0x00a00030 0x4>, diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index d18d0b0eda95..7957c8823f0d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -39,7 +39,13 @@ }; }; -&dsi0 { +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; + }; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l2a_1p25>; @@ -57,22 +63,16 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&panel_in>; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; - }; -}; - &mss_pil { firmware-name = "qcom/msm8996/natrium/mba.mbn", "qcom/msm8996/natrium/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi index a679a9c0cf99..b74cff06f300 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi @@ -24,101 +24,121 @@ opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-460800000 { opp-hz = /bits/ 64 <460800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-537600000 { opp-hz = /bits/ 64 <537600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-614400000 { opp-hz = /bits/ 64 <614400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-691200000 { opp-hz = /bits/ 64 <691200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-768000000 { opp-hz = /bits/ 64 <768000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-844800000 { opp-hz = /bits/ 64 <844800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; }; opp-902400000 { opp-hz = /bits/ 64 <902400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-979200000 { opp-hz = /bits/ 64 <979200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <614400>; }; opp-1132800000 { opp-hz = /bits/ 64 <1132800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <691200>; }; opp-1209600000 { opp-hz = /bits/ 64 <1209600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <768000>; }; opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <844800>; }; opp-1363200000 { opp-hz = /bits/ 64 <1363200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <979200>; }; opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; }; opp-1996800000 { opp-hz = /bits/ 64 <1996800000>; opp-supported-hw = <0x20>; clock-latency-ns = <200000>; + opp-peak-kBps = <1516800>; }; opp-2188800000 { opp-hz = /bits/ 64 <2188800000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; }; @@ -131,136 +151,163 @@ opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-460800000 { opp-hz = /bits/ 64 <460800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-537600000 { opp-hz = /bits/ 64 <537600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-614400000 { opp-hz = /bits/ 64 <614400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-691200000 { opp-hz = /bits/ 64 <691200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-748800000 { opp-hz = /bits/ 64 <748800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-825600000 { opp-hz = /bits/ 64 <825600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; }; opp-902400000 { opp-hz = /bits/ 64 <902400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-979200000 { opp-hz = /bits/ 64 <979200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; }; opp-1132800000 { opp-hz = /bits/ 64 <1132800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <614400>; }; opp-1209600000 { opp-hz = /bits/ 64 <1209600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <691200>; }; opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <768000>; }; opp-1363200000 { opp-hz = /bits/ 64 <1363200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <844800>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; }; opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <979200>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1056000>; }; opp-1670400000 { opp-hz = /bits/ 64 <1670400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; }; opp-1747200000 { opp-hz = /bits/ 64 <1747200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; }; opp-1824000000 { opp-hz = /bits/ 64 <1824000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1286400>; }; opp-1900800000 { opp-hz = /bits/ 64 <1900800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1363200>; }; opp-1977600000 { opp-hz = /bits/ 64 <1977600000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1440000>; }; opp-2054400000 { opp-hz = /bits/ 64 <2054400000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1516800>; }; opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; opp-2246400000 { opp-hz = /bits/ 64 <2246400000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; opp-2342400000 { opp-hz = /bits/ 64 <2342400000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; }; }; @@ -289,3 +336,7 @@ }; /* The rest is inherited from msm8996 */ }; + +&cbf { + compatible = "qcom,msm8996pro-cbf"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 062d56c42385..68e634f8212c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -279,10 +279,6 @@ }; }; -&pmi8998_rradc { - status = "okay"; -}; - &qusb2phy { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3ec941fed14f..f0e943ff0046 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -802,7 +802,7 @@ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -1230,6 +1230,57 @@ drive-strength = <2>; bias-pull-up; }; + + blsp1_spi_b_default: blsp1-spi-b-default-state { + pins = "gpio23", "gpio28"; + function = "blsp1_spi_b"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi1_default: blsp1-spi1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_spi1"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi2_default: blsp1-spi2-default-state { + pins = "gpio31", "gpio34", "gpio32", "gpio33"; + function = "blsp_spi2"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi3_default: blsp1-spi3-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_spi2"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi4_default: blsp1-spi4-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "blsp_spi4"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi5_default: blsp1-spi5-default-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "blsp_spi5"; + drive-strength = <6>; + bias-disable; + }; + + blsp1_spi6_default: blsp1-spi6-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_spi6"; + drive-strength = <6>; + bias-disable; + }; + + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ blsp2_i2c1_default: blsp2-i2c1-default-state { pins = "gpio55", "gpio56"; @@ -1314,6 +1365,48 @@ drive-strength = <2>; bias-pull-up; }; + + blsp2_spi1_default: blsp2-spi1-default-state { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "blsp_spi7"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi2_default: blsp2-spi2-default-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "blsp_spi8"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi3_default: blsp2-spi3-default-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_spi9"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi4_default: blsp2-spi4-default-state { + pins = "gpio65", "gpio66", "gpio67", "gpio68"; + function = "blsp_spi10"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi5_default: blsp2-spi5-default-state { + pins = "gpio58", "gpio59", "gpio60", "gpio61"; + function = "blsp_spi11"; + drive-strength = <6>; + bias-disable; + }; + + blsp2_spi6_default: blsp2-spi6-default-state { + pins = "gpio81", "gpio82", "gpio83", "gpio84"; + function = "blsp_spi12"; + drive-strength = <6>; + bias-disable; + }; }; remoteproc_mss: remoteproc@4080000 { @@ -2251,6 +2344,114 @@ #size-cells = <0>; }; + blsp1_spi1: spi@c175000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi1_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi2: spi@c176000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi2_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi3: spi@c177000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi3_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi4: spi@c178000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi4_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi5: spi@c179000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c179000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi5_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_spi6: spi@c17a000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c17a000 0x600>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi6_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x25000>; @@ -2394,6 +2595,114 @@ #size-cells = <0>; }; + blsp2_spi1: spi@c1b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi1_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi2: spi@c1b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi2_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi3: spi@c1b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi3_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi4: spi@c1b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi4_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi5: spi@c1b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1b9000 0x600>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi5_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_spi6: spi@c1ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x0c1ba000 0x600>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi6_default>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + mmcc: clock-controller@c8c0000 { compatible = "qcom,mmcc-msm8998"; #clock-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index d709d955a2f5..daa6f1d30efa 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com> */ +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index 46396ec1a330..db3d5c17a77d 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -55,5 +55,21 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8550_flash: led-controller@ee00 { + compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + + pm8550_pwm: pwm { + compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f4fb1a92ab55..1ea8920ff369 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -139,7 +139,7 @@ status = "disabled"; }; - wcd_codec: audio-codec@f000 { + pm8916_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000>; reg-names = "pmic-codec-core"; @@ -174,10 +174,8 @@ "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index a1d36f9ebbd2..2268daf27fa7 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -79,6 +79,16 @@ reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + + pm8953_gpios: gpio@c000 { + compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8953_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmic@1 { diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 340033ac3186..695d79116cde 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -55,7 +55,7 @@ pm8998_resin: resin { compatible = "qcom,pm8941-resin"; - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi new file mode 100644 index 000000000000..4eb79e0ce40a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz> + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmi632-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmi632_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmi632_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + channel@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + channel@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + channel@7 { + reg = <ADC5_USB_IN_I>; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + channel@8 { + reg = <ADC5_USB_IN_V_16>; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + channel@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + channel@4b { + reg = <ADC5_BAT_ID_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + label = "bat_id"; + }; + + channel@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + channel@84 { + reg = <ADC5_VBAT_SNS>; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + }; + + pmi632_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmi632_sdam_7: nvram@b600 { + compatible = "qcom,spmi-sdam"; + reg = <0xb600>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb600 0x100>; + }; + + pmi632_gpios: gpio@c000 { + compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi632_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_lpg: pwm { + compatible = "qcom,pmi632-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index ffe587f281d8..cd3f0790fd42 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,6 +9,26 @@ #address-cells = <1>; #size-cells = <0>; + pmi8998_charger: charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", + "bat-ov", + "wdog-bark", + "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + pmi8998_gpios: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; @@ -23,8 +43,6 @@ compatible = "qcom,pmi8998-rradc"; reg = <0x4500>; #io-channel-cells = <1>; - - status = "disabled"; }; }; @@ -60,6 +78,12 @@ status = "disabled"; }; + pmi8998_flash: led-controller@d300 { + compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pmi8998_wled: leds@d800 { compatible = "qcom,pmi8998-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index f26fb7d32faf..bc6297e7253e 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -13,6 +13,16 @@ #define PMK8350_SID 0 #endif +/ { + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +}; + &spmi_bus { pmk8350: pmic@PMK8350_SID { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; @@ -66,6 +76,19 @@ status = "disabled"; }; + pmk8350_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + pmk8350_gpios: gpio@b000 { compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio"; reg = <0xb000>; diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi index 201efeda7d2d..c7ac9b2eaacf 100644 --- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi @@ -8,6 +8,16 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +}; + &spmi_bus { pmk8550: pmic@0 { compatible = "qcom,pm8550", "qcom,spmi-pmic"; @@ -39,7 +49,19 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; + }; + + pmk8550_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; }; pmk8550_gpios: gpio@8800 { diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index b29bc4e4b837..0ed11e80e5e2 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -48,6 +48,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -65,6 +67,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -77,6 +81,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -89,6 +95,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; cpu-map { @@ -110,6 +118,30 @@ }; }; }; + + domain-idle-states { + CLUSTER_SLEEP: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000043>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + }; }; firmware { @@ -135,6 +167,35 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CLUSTER_PD: power-domain-cpu-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP>; + }; }; reserved_memory: reserved-memory { diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 59702ba24f35..358827c2fbd3 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -27,8 +27,8 @@ phy-handle = <&phy1>; phy-mode = "rgmii"; mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; compatible = "snps,dwmac-mdio"; phy1: phy@4 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts index 9e9fd4b8023e..1d22f87fd238 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -448,6 +448,29 @@ status = "okay"; }; +&sdhc { + pinctrl-0 = <&sdc_on_state>; + pinctrl-1 = <&sdc_off_state>; + pinctrl-names = "default", "sleep"; + + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + non-removable; + no-sd; + no-sdio; + + supports-cqe; + + vmmc-supply = <&vreg_l10a_2p95>; + vqmmc-supply = <&vreg_l7a_1p8>; + + status = "okay"; +}; + &uart7 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index fb553f0bb17a..1c0e5d271e91 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -852,6 +852,53 @@ #hwlock-cells = <1>; }; + sdhc: mmc@8804000 { + compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>, + <0x0 0x08805000 0x0 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC5_AHB_CLK>, + <&gcc GCC_SDCC5_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC5_BCR>; + + interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + power-domains = <&rpmhpd QDU1000_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + bus-width = <8>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <6528000 1652800>; + opp-avg-kBps = <400000 0>; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,qdu1000-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; @@ -1110,10 +1157,73 @@ pins = "gpio31"; function = "gpio"; }; + + sdc_on_state: sdc-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc_off_state: sdc-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + }; + + sram@14680000 { + compatible = "qcom,qdu1000-imem", "syscon", "simple-mfd"; + reg = <0 0x14680000 0 0x1000>; + ranges = <0 0 0x14680000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; }; apps_smmu: iommu@15000000 { - compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500"; + compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -1252,6 +1362,7 @@ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 0>; label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index dc80f0bca767..e23a0406eacc 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -5,7 +5,9 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "sm4250.dtsi" +#include "pm6125.dtsi" / { model = "Qualcomm Technologies, Inc. QRB4210 RB2"; @@ -19,21 +21,257 @@ stdout-path = "serial0:115200n8"; }; - vph_pwr: vph-pwr-regulator { + clocks { + clk40M: can-clk { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-user0 { + label = "green:user0"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { + compatible = "regulator-fixed"; + regulator-name = "VREG_HDMI_OUT_1P2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_1v2>; + regulator-always-on; + regulator-boot-on; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + /* Main barrel jack input */ + vdc_12v: regulator-vdc-12v { + compatible = "regulator-fixed"; + regulator-name = "DC_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* 1.2V supply stepped down from the barrel jack input */ + vdc_1v2: regulator-vdc-1v2 { + compatible = "regulator-fixed"; + regulator-name = "VDC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 3.3V supply stepped down from the barrel jack input */ + vdc_3v3: regulator-vdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 5V supply stepped down from the barrel jack input */ + vdc_5v: regulator-vdc-5v { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* "Battery" voltage for the SoM, stepped down from the barrel jack input */ + vdc_vbat_som: regulator-vdc-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + /* PMI632 charger out, supplied by VBAT */ + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; + vin-supply = <&vdc_vbat_som>; regulator-always-on; regulator-boot-on; }; }; +&gpi_dma0 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_hdmi_out_1p2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + pinctrl-names = "default"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l18a_1p232>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pm6125_gpios { + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qrb4210/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qrb4210/cdsp.mbn"; + + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm6125-regulators"; @@ -86,6 +324,7 @@ vreg_l5a_2p96: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; + regulator-allow-set-load; }; vreg_l6a_0p6: l6 { @@ -116,6 +355,7 @@ vreg_l11a_1p8: l11 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1952000>; + regulator-allow-set-load; }; vreg_l12a_1p8: l12 { @@ -190,6 +430,10 @@ }; &sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l24a_2p96>; vqmmc-supply = <&vreg_l11a_1p8>; no-sdio; @@ -199,7 +443,12 @@ }; &sdhc_2 { - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */ + + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l22a_2p96>; vqmmc-supply = <&vreg_l5a_2p96>; no-sdio; @@ -207,21 +456,78 @@ status = "okay"; }; +&spi5 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk40M>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &sleep_clk { clock-frequency = <32000>; }; &tlmm { - gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, - <49 1>, <52 1>, <54 1>, + gpio-reserved-ranges = <43 2>, <49 1>, <54 1>, <56 3>, <61 2>, <64 1>, <68 1>, <72 8>, <96 1>; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio41"; + function = "gpio"; + input-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio46"; + function = "gpio"; + bias-disable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart4 { status = "okay"; }; +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l15a_3p128>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index dd924331b0ee..9022ad726741 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -535,30 +535,6 @@ firmware-name = "qcom/sm8250/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l9a_1p2>; - -#if 0 - qcom,dual-dsi-mode; - qcom,master-dsi; -#endif - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l5a_0p88>; -}; - &gmu { status = "okay"; }; @@ -604,7 +580,7 @@ reg = <0>; lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -613,7 +589,7 @@ reg = <1>; lt9611_b: endpoint { - remote-endpoint = <&dsi1_out>; + remote-endpoint = <&mdss_dsi1_out>; }; }; #endif @@ -639,8 +615,28 @@ status = "okay"; }; -&mdss_mdp { +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l9a_1p2>; + +#if 0 + qcom,dual-dsi-mode; + qcom,master-dsi; +#endif + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { status = "okay"; + vdds-supply = <&vreg_l5a_0p88>; }; &pm8150_adc { diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 15e1ae1c1a97..5e4287f8c8cd 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -47,29 +47,6 @@ vin-supply = <&vreg_3p3>; }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; - snps,tx-sched-wrr; - - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - }; }; &apps_rsc { @@ -352,19 +329,40 @@ max-speed = <1000>; mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; - compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; /* Micrel KSZ9031RNZ PHY */ rgmii_phy: phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x7>; - interrupt-parent = <&tlmm>; - interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; - compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 24fa449d48a6..5a26974dcf8f 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -151,6 +151,185 @@ }; }; +ðernet0 { + snps,mtl-rx-config = <ðernet0_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet0_mtl_tx_setup>; + + max-speed = <1000>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_default>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Marvell 88EA1512 */ + rgmii_phy: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + + interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + device_type = "ethernet-phy"; + + /* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation + * from userspace to talk to the switch on the SGMII side of things + */ + marvell,reg-init = + /* Set MODE[2:0] to RGMII_SGMII */ + <0x12 0x14 0xfff8 0x4>, + /* Soft reset required after changing MODE[2:0] */ + <0x12 0x14 0x7fff 0x8000>; + }; + }; + + ethernet0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + snps,mtl-rx-config = <ðernet1_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet1_mtl_tx_setup>; + + max-speed = <1000>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet1_default>; + + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + ethernet1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_default>; @@ -316,6 +495,66 @@ /* PINCTRL */ &tlmm { + ethernet0_default: ethernet0-default-state { + mdc-pins { + pins = "gpio175"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio176"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; + function = "rgmii_0"; + drive-strength = <16>; + bias-disable; + }; + }; + + ethernet1_default: ethernet1-default-state { + mdc-pins { + pins = "gpio97"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio98"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; + function = "rgmii_1"; + drive-strength = <16>; + bias-disable; + }; + }; + i2c0_default: i2c0-default-state { /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ pins = "gpio135", "gpio136"; diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi index 4a990fda8fc3..bacbdec56281 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -167,6 +167,14 @@ }; }; +&gpucc { + status = "disabled"; +}; + +&gpu_smmu { + status = "disabled"; +}; + &pcie2a { compatible = "qcom,pcie-sa8540p"; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi index 7602cca47bae..3c3b6287cd27 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -88,6 +88,14 @@ }; }; }; + + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; }; &spmi_bus { @@ -108,8 +116,6 @@ compatible = "qcom,pmk8350-pon"; reg = <0x1200>, <0x800>; reg-names = "hlos", "pbs"; - mode-recovery = <0x1>; - mode-bootloader = <0x2>; pmm8654au_0_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; @@ -135,6 +141,19 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmm8654au_0_sdam_0: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; }; pmm8654au_1: pmic@2 { diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index f238a02a5448..ab767cfa51ff 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sa8775p.dtsi" @@ -18,8 +19,10 @@ serial0 = &uart10; serial1 = &uart12; serial2 = &uart17; + i2c11 = &i2c11; i2c18 = &i2c18; spi16 = &spi16; + ufshc1 = &ufs_mem_hc; }; chosen { @@ -258,6 +261,13 @@ }; }; +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + &i2c18 { clock-frequency = <400000>; pinctrl-0 = <&qup_i2c18_default>; @@ -291,6 +301,13 @@ "BT_EN", "USB2_PWR_EN", "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; }; &pmm8654au_2_gpios { @@ -306,6 +323,20 @@ "USB1_PWR_ENABLE", "USB1_FAULT", "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; }; &pmm8654au_3_gpios { @@ -347,6 +378,13 @@ bias-disable; }; + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + qup_i2c18_default: qup-i2c18-state { pins = "gpio95", "gpio96"; function = "qup2_se4"; @@ -426,6 +464,94 @@ status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + &xo_board_clk { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index c3310caf9f68..b130136acffe 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -7,7 +7,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -308,6 +310,11 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -469,8 +476,8 @@ <0>, <0>, <0>, - <0>, - <0>, + <&usb_0_qmpphy>, + <&usb_1_qmpphy>, <0>, <0>, <0>, @@ -503,6 +510,111 @@ #size-cells = <2>; status = "disabled"; + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x880000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x880000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x888000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + spi16: spi@888000 { compatible = "qcom,geni-spi"; reg = <0x0 0x00888000 0x0 0x4000>; @@ -524,6 +636,48 @@ status = "disabled"; }; + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart17: serial@88c000 { compatible = "qcom,geni-uart"; reg = <0x0 0x0088c000 0x0 0x4000>; @@ -559,6 +713,391 @@ #size-cells = <0>; status = "disabled"; }; + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x890000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x894000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x894000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c20: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x898000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi20: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x898000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x403 0x0>; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x980000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x980000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x994000 0x0 0x4000>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; }; qupv3_id_1: geniqup@ac0000 { @@ -573,6 +1112,189 @@ iommus = <&apps_smmu 0x443 0x0>; status = "disabled"; + i2c7: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi7: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c8: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi8: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c9: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi9: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + uart9: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa88000 0x0 0x4000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c10: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi10: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart10: serial@a8c000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a8c000 0x0 0x4000>; @@ -589,6 +1311,90 @@ status = "disabled"; }; + i2c11: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi11: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c12: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi12: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + uart12: serial@a94000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a94000 0x0 0x4000>; @@ -603,6 +1409,376 @@ power-domains = <&rpmhpd SA8775P_CX>; status = "disabled"; }; + + i2c13: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa98000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + qupv3_id_3: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xbc0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c21: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xb80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + spi21: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xb80000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + iommus = <&apps_smmu 0x100 0x0>; + dma-coherent; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sa8775p-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe10>; + /* + * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It + * enables the CXO clock to eDP *and* UFS PHY. + */ + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_0_hsphy: phy@88e4000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e4000 0 0x120>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0_qmpphy: phy@88e8000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088e8000 0 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x080 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1_hsphy: phy@88e6000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e6000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@88ea000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088ea000 0 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_RISING>, + <&pdc 7 IRQ_TYPE_EDGE_RISING>, + <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xe000>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0a0 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2_hsphy: phy@88e7000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB3_PHY_TERT_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2: usb@a4f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xe000>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x020 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + }; }; tcsr_mutex: hwlock@1f40000 { @@ -611,6 +1787,56 @@ #hwlock-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sa8775p-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>, @@ -658,6 +1884,16 @@ interrupt-controller; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + #clock-cells = <0>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x1100>, @@ -829,6 +2065,80 @@ <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; }; + pcie_smmu: iommu@15200000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15200000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ @@ -840,6 +2150,13 @@ redistributor-stride = <0x0 0x20000>; }; + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt"; + reg = <0x0 0x17c10000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + memtimer: timer@17c20000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts new file mode 100644 index 000000000000..b637b4270f88 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -0,0 +1,845 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7180.dtsi" + +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &tz_mem; +/delete-node/ &ipa_fw_mem; + +/ { + model = "Acer Aspire 1"; + compatible = "acer,aspire1", "qcom,sc7180"; + chassis-type = "laptop"; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + zap_mem: zap-shader@80840000 { + reg = <0x0 0x80840000 0 0x2000>; + no-map; + }; + + venus_mem: venus@85b00000 { + reg = <0x0 0x85b00000 0 0x500000>; + no-map; + }; + + mpss_mem: mpss@86000000 { + reg = <0x0 0x86000000 0x0 0x2000000>; + no-map; + }; + + adsp_mem: adsp@8e400000 { + reg = <0x0 0x8e400000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: wlan@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + }; + + max98357a: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&_sd_mode_default>; + pinctrl-names = "default"; + + #sound-dai-cells = <0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&sn65dsi86_bridge 1000000>; + enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&soc_bkoff_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p2: bridge-1p2-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p2_en_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p8: bridge-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_l8c_1p8>; + + gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p8_en_default>; + pinctrl-names = "default"; + }; + + reg_codec_3p3: codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "codec_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_audio_en_default>; + pinctrl-names = "default"; + }; + + reg_lcm_3p3: panel-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcm_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_lcm_en_default>; + pinctrl-names = "default"; + }; + + reg_tp_3p3: touchpad-regulator { + compatible = "regulator-fixed"; + regulator-name = "tp_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tp_en_default>; + pinctrl-names = "default"; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + /* embedded-controller@76 */ +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* + * NOTE: DSDT defines two possible touchpads, other one is + * + * reg = <0x15>; + * hid-descr-addr = <0x1>; + */ + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + vdd-supply = <®_tp_3p3>; + + interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_touchpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_keyboard_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-0 = <&codec_irq_default>; + pinctrl-names = "default"; + + AVDD-supply = <&vreg_l15a_1p8>; + MICVDD-supply = <®_codec_3p3>; + VBAT-supply = <®_codec_3p3>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + sn65dsi86_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&bridge_en_default>, + <&edp_bridge_irq_default>, + <&bridge_suspend_default>; + pinctrl-names = "default"; + + vpll-supply = <®_brij_1p8>; + vccio-supply = <®_brij_1p8>; + vcca-supply = <®_brij_1p2>; + vcc-supply = <®_brij_1p2>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <®_lcm_3p3>; + backlight = <&backlight>; + hpd-absent-delay-ms = <200>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&zap_mem>; + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3c_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l4a_0p8>; + status = "okay"; +}; + +&pm6150_adc { + thermistor@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + charger-thermistor@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6150_pon { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + +&uart3 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + peer-hub = <&usb_hub_3_x>; + }; + + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + peer-hub = <&usb_hub_2_x>; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&qup_i2c2_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c4_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c9_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c10_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&tlmm { + /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>; + + amp_sd_mode_default: amp-sd-mode-deault-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_en_default: bridge-en-default-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_suspend_default: bridge-suspend-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + codec_irq_default: codec-irq-deault-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_bridge_irq_default: edp-bridge-irq-default-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hid_keyboard_default: hid-keyboard-default-state { + pins = "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hid_touchpad_default: hid-touchpad-default-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + function = "gpio"; + bias-pull-down; + }; + + rts-pins { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + function = "gpio"; + bias-pull-down; + }; + + tx-pins { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + function = "gpio"; + bias-pull-up; + }; + + rx-pins { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + function = "gpio"; + bias-pull-up; + }; + }; + + reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state { + pins = "gpio19"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_lcm_en_default: reg-lcm-en-deault-state { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_audio_en_default: reg-audio-en-deault-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reg_tp_en_default: reg-tp-en-deault-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + soc_bkoff_default: soc-bkoff-deault-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <16>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 299ef5dc225a..a1c50be4ad95 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -295,7 +295,11 @@ }; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l3c_1p2>; @@ -314,7 +318,7 @@ port { panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -329,19 +333,11 @@ }; }; -&dsi_phy { +&mdss_dsi0_phy { status = "okay"; vdds-supply = <&vreg_l4a_0p8>; }; -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &qfprom { vcc-supply = <&vreg_l11a_1p8>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index 5aa7949b5328..bede23369fed 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -46,10 +46,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&dsi0_out { - remote-endpoint = <&ps8640_in>; -}; - edp_brij_i2c: &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -74,7 +70,7 @@ edp_brij_i2c: &i2c2 { port@0 { reg = <0>; ps8640_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -102,6 +98,10 @@ edp_brij_i2c: &i2c2 { }; }; +&mdss_dsi0_out { + remote-endpoint = <&ps8640_in>; +}; + &tlmm { edp_brij_ps8640_rst: edp-brij-ps8640-rst-state { pins = "gpio11"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts index 5c81e44ed4a5..0a7f2286b541 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts @@ -15,7 +15,7 @@ compatible = "google,quackingstick-sku1537", "qcom,sc7180"; }; -&dsi_phy { +&mdss_dsi0_phy { qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; qcom,phy-drive-ldo-level = <375>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 8e7b42f843d4..62ab6427dd65 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -52,7 +52,31 @@ }; }; -&dsi0 { +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&mdss_dsi0 { panel: panel@0 { /* Compatible will be filled in per-board */ reg = <0>; @@ -67,7 +91,7 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -82,30 +106,6 @@ }; }; -&gpio_keys { - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - }; -}; - &sdhc_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index e52b8776755d..b0c3be4c3bb4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -27,10 +27,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&dsi0_out { - remote-endpoint = <&sn65dsi86_in>; -}; - edp_brij_i2c: &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -65,7 +61,7 @@ edp_brij_i2c: &i2c2 { port@0 { reg = <0>; sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -95,6 +91,10 @@ edp_brij_i2c: &i2c2 { }; }; +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; +}; + &tlmm { edp_brij_irq: edp-brij-irq-state { pins = "gpio11"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts index c5b0658bd632..6eeead70d3eb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -17,7 +17,7 @@ compatible = "google,wormdingler-sku1024", "qcom,sc7180"; }; -&dsi_phy { +&mdss_dsi0_phy { qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; qcom,phy-drive-ldo-level = <450>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 262d6691abd9..2efa8a4bcda6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -110,7 +110,28 @@ }; }; -&dsi0 { +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@1 { + compatible = "hid-over-i2c"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + vddl-supply = <&pp1800_ts>; + }; +}; + +&mdss_dsi0 { panel: panel@0 { reg = <0>; @@ -126,7 +147,7 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -141,27 +162,6 @@ }; }; -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@1 { - compatible = "hid-over-i2c"; - reg = <0x01>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - - post-power-on-delay-ms = <70>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - vddl-supply = <&pp1800_ts>; - }; -}; - &pm6150_adc { skin-temp-thermistor@4d { reg = <ADC5_AMUX_THM1_100K_PU>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 1472e7f10831..681637cf6c4a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -705,20 +705,6 @@ ap_h1_spi: &spi0 { status = "disabled"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; -}; - -&dsi_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - ap_sar_sensor_i2c: &i2c5 { clock-frequency = <400000>; @@ -788,6 +774,10 @@ hp_i2c: &i2c9 { }; }; +&lpasscc { + status = "okay"; +}; + &lpass_cpu { status = "okay"; @@ -813,7 +803,7 @@ hp_i2c: &i2c9 { }; }; -&mdp { +&lpass_hm { status = "okay"; }; @@ -832,6 +822,20 @@ hp_i2c: &i2c9 { link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + &pm6150_adc { charger-thermistor@4f { reg = <ADC5_AMUX_THM3_100K_PU>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a65be760d1a7..e25dc2bb52a7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2700,6 +2700,7 @@ qspi: spi@88dc000 { compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; + iommus = <&apps_smmu 0x20 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; @@ -2997,8 +2998,6 @@ interrupt-parent = <&mdss>; interrupts = <0>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -3006,7 +3005,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; @@ -3043,7 +3042,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -3066,12 +3065,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC7180_CX>; - phys = <&dsi_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -3084,14 +3083,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -3116,13 +3115,13 @@ }; }; - dsi_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, <0 0x0ae94a00 0 0x1e0>; - reg-names = "dsi_phy", - "dsi_phy_lane", + reg-names = "dsi0_phy", + "dsi0_phy_lane", "dsi_pll"; #clock-cells = <1>; @@ -3213,8 +3212,8 @@ reg = <0 0x0af00000 0 0x200000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <&dsi_phy 0>, - <&dsi_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -3636,6 +3635,8 @@ power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; #clock-cells = <1>; #power-domain-cells = <1>; + + status = "reserved"; /* Controlled by ADSP */ }; lpass_cpu: lpass@62d87000 { @@ -3684,6 +3685,8 @@ #clock-cells = <1>; #power-domain-cells = <1>; + + status = "reserved"; /* Controlled by ADSP */ }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 5b1c175c47f1..9ea6636125ad 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -467,10 +467,6 @@ ap_i2c_tpm: &i2c14 { link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; -&mdss_mdp { - status = "okay"; -}; - /* NVMe drive, enabled on a per-board basis */ &pcie1 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 36f0bb9b3cbb..a0e8db8270e7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -649,6 +649,18 @@ }; }; + eud_typec: connector { + compatible = "usb-c-connector"; + + ports { + port@0 { + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -3430,6 +3442,7 @@ phy-names = "usb2-phy"; maximum-speed = "high-speed"; usb-role-switch; + port { usb2_role_switch: endpoint { remote-endpoint = <&eud_ep>; @@ -3441,6 +3454,7 @@ qspi: spi@88dc000 { compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x1000>; + iommus = <&apps_smmu 0x20 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -3605,10 +3619,11 @@ }; eud: eud@88e0000 { - compatible = "qcom,sc7280-eud","qcom,eud"; - reg = <0 0x088e0000 0 0x2000>, - <0 0x088e2000 0 0x1000>; + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3619,6 +3634,7 @@ remote-endpoint = <&usb2_role_switch>; }; }; + port@1 { reg = <1>; eud_con: endpoint { @@ -3628,21 +3644,6 @@ }; }; - eud_typec: connector { - compatible = "usb-c-connector"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - con_eud: endpoint { - remote-endpoint = <&eud_con>; - }; - }; - }; - }; - nsp_noc: interconnect@a0c0000 { reg = <0 0x0a0c0000 0 0x10000>; compatible = "qcom,sc7280-nsp-noc"; @@ -3880,8 +3881,6 @@ interrupt-parent = <&mdss>; interrupts = <0>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -3889,7 +3888,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; @@ -3974,14 +3973,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts new file mode 100644 index 000000000000..fe3b366e1435 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Lenovo Flex 5G"; + compatible = "lenovo,flex-5g", "qcom,sc8180x"; + + aliases { + serial0 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bl_pwm_default>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_active_state>; + pinctrl-names = "default"; + + lid { + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x3000000>; + no-map; + }; + + adsp_mem: adsp-region@90800000 { + reg = <0x0 0x90800000 0x0 0x1c00000>; + no-map; + }; + + gpu_mem: gpu-region@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + cdsp_mem: cdsp-region@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; + pinctrl-names = "default"; + + status = "okay"; + + hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; + pinctrl-names = "default"; + + status = "okay"; + + hid@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + }; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-0 = <&edp_hpd_active>; + pinctrl-names = "default"; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + no-hpd; + + backlight = <&backlight>; + + ports { + port { + auo_b140han06_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b140han06_in>; + }; + }; + }; +}; + +&pcie3 { + perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie3_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + memory-region = <&cdsp_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn"; + + status = "okay"; +}; + +&uart13 { + pinctrl-0 = <&uart13_state>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default: bl-pwm-default-state { + en-pins { + pins = "gpio8"; + function = "normal"; + }; + + pwm-pins { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + i2c1_active: i2c1-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + bias-pull-up = <1>; + drive-strength = <2>; + }; + + i2c1_hid_active: i2c1-hid-active-state { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_active: i2c7-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_hid_active: i2c7-hid-active-state { + pins = "gpio37", "gpio24"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + pcie3_default_state: pcie3-default-state { + clkreq-pins { + pins = "gpio179"; + function = "pci_e3"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio178"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio180"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart13_state: uart13-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx-pins { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi new file mode 100644 index 000000000000..8247af01c84a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2021-2023, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +/ { + thermal-zones { + pmc8180-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmc8180_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmc8180c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmc8180c_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmc8180_0: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pmc8180_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmc8180_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8180_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmc8180_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + + pmc8180_gpios: gpio@c000 { + compatible = "qcom,pmc8180-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmc8180", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@2 { + compatible = "qcom,smb2351", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + vcoin@85 { + reg = <0x85>; + qcom,pre-scaling = <1 1>; + label = "vcoin2"; + }; + }; + }; + + pmic@6 { + compatible = "qcom,pm8150c", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@a { + compatible = "qcom,smb2351", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + vcoin@85 { + reg = <0x85>; + qcom,pre-scaling = <1 1>; + label = "vcoin"; + }; + }; + }; + + pmic@4 { + compatible = "qcom,pm8150c", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmc8180c_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8180c_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmc8180c_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmc8180c_gpios: gpio@c000 { + compatible = "qcom,pmc8180c-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@5 { + compatible = "qcom,pmc8180c", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + + pmc8180c_lpg: lpg { + compatible = "qcom,pmc8180c-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts new file mode 100644 index 000000000000..fc038474cb71 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Qualcomm SC8180x Primus"; + compatible = "qcom,sc8180x-primus", "qcom,sc8180x"; + + aliases { + serial0 = &uart12; + serial1 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwm_default>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_active_state>; + + lid-switch { + gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + adsp_mem: adsp-region@96e00000 { + reg = <0x0 0x96e00000 0x0 0x1c00000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + gpu_mem: gpu-region@98a00000 { + reg = <0x0 0x98a00000 0x0 0x2000>; + no-map; + }; + + reserved-region@9a500000 { + reg = <0x0 0x9a500000 0x0 0x600000>; + no-map; + }; + }; + + vreg_nvme_0p9: nvme-0p9-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_nvme_0p9"; + + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-always-on; + }; + + vreg_nvme_3p3: nvme-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_nvme_3p3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8180c_gpios 11 0>; + enable-active-high; + + regulator-always-on; + }; + + vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_kb_tp_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + + pinctrl-names = "default"; + pinctrl-0 = <&kb_tp_3v3_en_active_state>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p8: smps8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_3p3: ldo4 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12e: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_i2c_active_state>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + vdd-supply = <&vreg_l4c_3p3>; + vddl-supply = <&vreg_l12e>; + + post-power-on-delay-ms = <20>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_active_state>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&aux_i2c_active_state>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_active_state>; + + vdd-supply = <&vdd_kb_tp_3v3>; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&kb_int_active_state>; + + vdd-supply = <&vdd_kb_tp_3v3>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd_active>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + + backlight = <&backlight>; + + ports { + port { + auo_b133han05_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b133han05_in>; + }; + }; + }; +}; + +&pcie1 { + perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/qcmpss8180.mbn"; + + status = "okay"; +}; + +&uart12 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart13 { + pinctrl-names = "default"; + pinctrl-0 = <&uart13_state>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default: bl-pwm-default-state { + en-pins { + pins = "gpio8"; + function = "normal"; + }; + + pwm-pins { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + aux_i2c_active_state: aux-i2c-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-disable; + drive-strength = <16>; + }; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + kb_int_active_state: kb-int-active-state { + int-n-pins { + pins = "gpio37"; + function = "gpio"; + + bias-pull-up; + intput-enable; + }; + + kp-disable-pins { + pins = "gpio135"; + function = "gpio"; + + output-high; + }; + }; + + kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state { + pins = "gpio4"; + function = "gpio"; + + bias-disable; + }; + + pcie2_default_state: pcie2-default-state { + clkreq-pins { + pins = "gpio176"; + function = "pci_e2"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio175"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio177"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + tp_int_active_state: tp-int-active-state { + tp-int-pins { + pins = "gpio24"; + function = "gpio"; + + bias-disable; + input-enable; + }; + + tp-close-n-pins { + pins = "gpio116"; + function = "gpio"; + + bias-disable; + input-enable; + }; + }; + + ts_active_state: ts-active-state { + int-n-pins { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + reset-n-pins { + pins = "gpio54"; + function = "gpio"; + + output-high; + }; + }; + + ts_i2c_active_state: ts-i2c-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + /* External pull up */ + bias-disable; + drive-strength = <2>; + }; + + uart13_state: uart13-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx-pins { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi new file mode 100644 index 000000000000..d3ae18535636 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -0,0 +1,4032 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,dispcc-sm8250.h> +#include <dt-bindings/clock/qcom,gcc-sc8180x.h> +#include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interconnect/qcom,sc8180x.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; + + L2_300: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_400: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_500: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_600: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; + + L2_700: l2-cache { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-peak-kBps = <800000 9600000>; + }; + + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-peak-kBps = <800000 12902400>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <800000 12902400>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <800000 15974400>; + }; + + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <1804000 19660800>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + opp-peak-kBps = <1804000 19660800>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <1804000 22732800>; + }; + + opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <2188000 25804800>; + }; + + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <2188000 31948800>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <3072000 31948800>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <1804000 15974400>; + }; + + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 19660800>; + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <2188000 22732800>; + }; + + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 25804800>; + }; + + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <4068000 31948800>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <4068000 31948800>; + }; + + opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <4068000 40550400>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <4068000 40550400>; + }; + + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <4068000 43008000>; + }; + + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <6220000 49152000>; + }; + + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 49152000>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <8368000 49152000>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2918400000 { + opp-hz = /bits/ 64 <2918400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8180x", "qcom,scm"; + }; + }; + + camnoc_virt: interconnect-camnoc-virt { + compatible = "qcom,sc8180x-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8180x-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qup_virt: interconnect-qup-virt { + compatible = "qcom,sc8180x-qup-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: xbl@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: aop@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: cmd-db@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + reserved@85f40000 { + reg = <0x0 0x85f40000 0x0 0x10000>; + no-map; + }; + + smem_mem: smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + reserved@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + reserved@89b00000 { + reg = <0x0 0x89b00000 0x0 0x1c00000>; + no-map; + }; + + reserved@9d400000 { + reg = <0x0 0x9d400000 0x0 0x1000000>; + no-map; + }; + + reserved@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + + reserved@9f800000 { + reg = <0x0 0x9f800000 0x0 0x800000>; + no-map; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + modem_smp2p_ipa_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_ipa_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + modem_smp2p_wlan_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8180x"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x4c3 0>; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@89c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0089c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x603 0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c16: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart16: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_2: geniqup@cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00cc0000 0x0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x7a3 0>; + status = "disabled"; + + i2c17: i2c@c80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@c80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@c80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c18: i2c@c84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@c84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart18: serial@c84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c19: i2c@c88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@c88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart19: serial@c88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@c8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart13: serial@c8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@c90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@c90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart14: serial@c90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@c94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@c94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart15: serial@c94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sc8180x-config-noc"; + reg = <0 0x01500000 0 0x7400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sc8180x-system-noc"; + reg = <0 0x01620000 0 0x19400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc8180x-aggre1-noc"; + reg = <0 0x016e0000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sc8180x-aggre2-noc"; + reg = <0 0x01700000 0 0x20000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1720000 { + compatible = "qcom,sc8180x-compute-noc"; + reg = <0 0x01720000 0 0x7000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sc8180x-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy-wrapper@1c06000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx0 */ + <0 0x1c06400 0 0x200>, /* rx0 */ + <0 0x1c06a00 0 0x1f0>, /* pcs */ + <0 0x1c06600 0 0x170>, /* tx1 */ + <0 0x1c06800 0 0x200>, /* rx1 */ + <0 0x1c06e00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + }; + }; + + pcie3: pci@1c08000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <3>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_3_PIPE_CLK>, + <&gcc GCC_PCIE_3_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_3_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_3_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie3_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3_phy: phy-wrapper@1c0c000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c0c000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3_CLKREF_CLK>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_3_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE3_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie3_lane: phy@1c0c200 { + reg = <0 0x1c0c200 0 0x170>, /* tx0 */ + <0 0x1c0c400 0 0x200>, /* rx0 */ + <0 0x1c0ca00 0 0x1f0>, /* pcs */ + <0 0x1c0c600 0 0x170>, /* tx1 */ + <0 0x1c0c800 0 0x200>, /* rx1 */ + <0 0x1c0ce00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_3_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_3_pipe_clk"; + #phy-cells = <0>; + }; + }; + + pcie1: pci@1c10000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c10000 0 0x3000>, + <0 0x68000000 0 0xf1d>, + <0 0x68000f20 0 0xa8>, + <0 0x68001000 0 0x1000>, + <0 0x68100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>, + <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy-wrapper@1c16000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c16000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c16200 0 0x170>, /* tx0 */ + <0 0x1c16400 0 0x200>, /* rx0 */ + <0 0x1c16a00 0 0x1f0>, /* pcs */ + <0 0x1c16600 0 0x170>, /* tx1 */ + <0 0x1c16800 0 0x200>, /* rx1 */ + <0 0x1c16e00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + }; + }; + + pcie2: pci@1c18000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c18000 0 0x3000>, + <0 0x70000000 0 0xf1d>, + <0 0x70000f20 0 0xa8>, + <0 0x70001000 0 0x1000>, + <0 0x70100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <4>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_2_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, + <0x100 &apps_smmu 0x1d01 0x1>; + + resets = <&gcc GCC_PCIE_2_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2_GDSC>; + + interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie2_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2_phy: phy-wrapper@1c1c000 { + compatible = "qcom,sc8180x-qmp-pcie-phy"; + reg = <0 0x1c1c000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_CLKREF_CLK>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie2_lane: phy@1c0e200 { + reg = <0 0x1c1c200 0 0x170>, /* tx0 */ + <0 0x1c1c400 0 0x200>, /* rx0 */ + <0 0x1c1ca00 0 0x1f0>, /* pcs */ + <0 0x1c1c600 0 0x170>, /* tx1 */ + <0 0x1c1c800 0 0x200>, /* rx1 */ + <0 0x1c1ce00 0 0xf4>; /* pcs_com */ + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk"; + + #phy-cells = <0>; + }; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sc8180x-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + iommus = <&apps_smmu 0x300 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy-wrapper@1d87000 { + compatible = "qcom,sc8180x-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sc8180x-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + gpu: gpu@2c00000 { + compatible = "qcom,adreno-680.1", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0 0x02c00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0xc01>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-461000000 { + opp-hz = /bits/ 64 <461000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-405000000 { + opp-hz = /bits/ 64 <405000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-177000000 { + opp-hz = /bits/ 64 <177000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gmu: gmu@2c6a000 { + compatible="qcom,adreno-gmu-680.1", "qcom,adreno-gmu"; + + reg = <0 0x02c6a000 0 0x30000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", + "gmu_pdc", + "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0xc00>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + }; + }; + + gpucc: clock-controller@2c90000 { + compatible = "qcom,sc8180x-gpucc"; + reg = <0 0x02c90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@2ca0000 { + compatible = "qcom,sc8180x-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x02ca0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sc8180x-tlmm"; + reg = <0 0x03100000 0 0x300000>, + <0 0x03500000 0 0x700000>, + <0 0x03d00000 0 0x300000>; + reg-names = "west", "east", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 191>; + wakeup-parent = <&pdc>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc8180x-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>, + <&rpmhpd SC8180X_MSS>; + power-domain-names = "cx", "mss"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,sc8180x-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>; + power-domain-names = "cx"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + + usb_prim_hsphy: phy@88e2000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e2000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_sec_hsphy: phy@88e3000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_prim_qmpphy: phy@88e9000 { + compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; + reg-names = "reg-base", "dp_com"; + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", + "ref_clk_src", + "ref", + "com_aux"; + resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_prim_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + }; + + usb_prim_dpphy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + usb_sec_qmpphy: phy@88ee000 { + compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; + reg = <0 0x088ee000 0 0x18c>, + <0 0x088ed000 0 0x10>, + <0 0x088ef000 0 0x40>; + reg-names = "reg-base", "dp_com"; + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", + "ref_clk_src", + "ref", + "com_aux"; + resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_sec_ssphy: usb3-phy@88e9200 { + reg = <0 0x088ee200 0 0x200>, + <0 0x088ee400 0 0x200>, + <0 0x088eec00 0 0x218>, + <0 0x088ee600 0 0x200>, + <0 0x088ee800 0 0x200>, + <0 0x088eea00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + }; + + usb_sec_dpphy: dp-phy@88ef200 { + reg = <0 0x088ef200 0 0x200>, + <0 0x088ef400 0 0x200>, + <0 0x088efa00 0 0x200>, + <0 0x088ef600 0 0x200>, + <0 0x088ef800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + clock-output-names = "qmp_dptx1_phy_pll_link_clk", + "qmp_dptx1_phy_pll_vco_div_clk"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8180x-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sc8180x-gem-noc"; + reg = <0 0x09680000 0 0x58200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_prim: usb@a6f8800 { + compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "mock_utmi", + "sleep", + "xo"; + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc USB30_PRIM_GDSC>; + + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + status = "disabled"; + + usb_prim_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x140 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_sec: usb@a8f8800 { + compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "mock_utmi", + "sleep", + "xo"; + resets = <&gcc GCC_USB30_SEC_BCR>; + power-domains = <&gcc USB30_SEC_GDSC>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + status = "disabled"; + + usb_sec_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x160 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sc8180x-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "nrt_bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x800 0x420>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sc8180x-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@4 { + reg = <4>; + dpu_intf4_out: endpoint { + remote-endpoint = <&dp1_in>; + }; + }; + + port@5 { + reg = <5>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sc8180x-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae90a00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>; + + phys = <&usb_prim_dpphy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp0_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@ae98000 { + compatible = "qcom,sc8180x-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae98a00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <13>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>; + assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>; + + phys = <&usb_sec_dpphy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp0_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp1_in: endpoint { + remote-endpoint = <&dpu_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp: displayport-controller@ae9a000 { + compatible = "qcom,sc8180x-edp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9aa00 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <14>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&edp_phy 0>, <&edp_phy 1>; + + phys = <&edp_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC8180X_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + edp_phy: phy@aec2a00 { + compatible = "qcom,sc8180x-edp-phy"; + reg = <0 0x0aec2a00 0 0x1c0>, + <0 0x0aec2200 0 0xa0>, + <0 0x0aec2600 0 0xa0>, + <0 0x0aec2000 0 0x19c>; + + clocks = <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + power-domains = <&dispcc MDSS_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc8180x-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&usb_prim_dpphy 0>, + <&usb_prim_dpphy 1>, + <&usb_sec_dpphy 0>, + <&usb_sec_dpphy 1>, + <&edp_phy 0>, + <&edp_phy 1>; + clock-names = "bi_tcxo", + "sleep_clk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + power-domains = <&rpmhpd SC8180X_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8180x-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <9>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>; + + }; + + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,sc8180x-adsp-pas"; + reg = <0x0 0x17300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8180X_CX>; + power-domain-names = "cx"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sc8180x-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + + frame@17c21000{ + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c26000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8180x-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8180x-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sc8180x-osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + lmh@18350800 { + compatible = "qcom,sc8180x-lmh"; + reg = <0 0x18350800 0 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh@18358800 { + compatible = "qcom,sc8180x-lmh"; + reg = <0 0x18358800 0 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + clock-names = "cxo_ref_clk_pin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0640 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mdm-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 5b25d54b9591..b566e403d1db 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -64,7 +64,7 @@ reg = <1>; pmic_glink_con0_ss: endpoint { - remote-endpoint = <&mdss0_dp0_out>; + remote-endpoint = <&usb_0_qmpphy_out>; }; }; @@ -99,7 +99,7 @@ reg = <1>; pmic_glink_con1_ss: endpoint { - remote-endpoint = <&mdss0_dp1_out>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; @@ -210,6 +210,11 @@ }; reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -308,6 +313,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l7c: ldo7 { regulator-name = "vreg_l7c"; regulator-min-microvolt = <2504000>; @@ -318,6 +330,13 @@ RPMH_REGULATOR_MODE_HPM>; }; + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l13c: ldo13 { regulator-name = "vreg_l13c"; regulator-min-microvolt = <3072000>; @@ -376,6 +395,15 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; + }; +}; + &mdss0 { status = "okay"; }; @@ -386,7 +414,7 @@ &mdss0_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con0_ss>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { @@ -395,7 +423,7 @@ &mdss0_dp1_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con1_ss>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { @@ -600,6 +628,19 @@ status = "okay"; }; +&sdc2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + &uart17 { compatible = "qcom,geni-debug-uart"; @@ -644,9 +685,19 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + status = "okay"; }; +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + &usb_0_role_switch { remote-endpoint = <&pmic_glink_con0_hs>; }; @@ -671,9 +722,19 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + orientation-switch; + status = "okay"; }; +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + &usb_1_role_switch { remote-endpoint = <&pmic_glink_con1_hs>; }; @@ -842,6 +903,60 @@ }; }; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index bdcba719fc38..7cc3028440b6 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -106,7 +106,7 @@ reg = <1>; pmic_glink_con0_ss: endpoint { - remote-endpoint = <&mdss0_dp0_out>; + remote-endpoint = <&usb_0_qmpphy_out>; }; }; @@ -141,7 +141,7 @@ reg = <1>; pmic_glink_con1_ss: endpoint { - remote-endpoint = <&mdss0_dp1_out>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; @@ -264,6 +264,11 @@ }; reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -518,6 +523,15 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; + }; +}; + &mdss0 { status = "okay"; }; @@ -528,7 +542,7 @@ &mdss0_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con0_ss>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { @@ -537,7 +551,7 @@ &mdss0_dp1_out { data-lanes = <0 1>; - remote-endpoint = <&pmic_glink_con1_ss>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { @@ -1114,9 +1128,19 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + status = "okay"; }; +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + &usb_0_role_switch { remote-endpoint = <&pmic_glink_con0_hs>; }; @@ -1141,9 +1165,19 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + orientation-switch; + status = "okay"; }; +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + &usb_1_role_switch { remote-endpoint = <&pmic_glink_con1_hs>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index cc4aef21e617..ac0596dfdbc4 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -6,7 +6,9 @@ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -777,6 +779,36 @@ ranges = <0 0 0 0 0x10 0>; dma-ranges = <0 0 0 0 0x10 0>; + ethernet0: ethernet@20000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC0_AXI_CLK>, + <&gcc GCC_EMAC0_SLV_AHB_CLK>, + <&gcc GCC_EMAC0_PTP_CLK>, + <&gcc GCC_EMAC0_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x4c0 0xf>; + power-domains = <&gcc EMAC_0_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + gcc: clock-controller@100000 { compatible = "qcom,gcc-sc8280xp"; reg = <0x0 0x00100000 0x0 0x1f0000>; @@ -2310,6 +2342,180 @@ reg = <0x0 0x01fc0000 0x0 0x30000>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-690.0", "qcom,adreno"; + + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>; + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <451000>; + }; + + opp-410000000 { + opp-hz = /bits/ 64 <410000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <1555000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <1555000>; + }; + + opp-547000000 { + opp-hz = /bits/ 64 <547000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-peak-kBps = <1555000>; + }; + + opp-606000000 { + opp-hz = /bits/ 64 <606000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <2736000>; + }; + + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <2736000>; + }; + + opp-655000000 { + opp-hz = /bits/ 64 <655000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <2736000>; + }; + + opp-690000000 { + opp-hz = /bits/ 64 <690000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <2736000>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x03de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&gpu_smmu 5 0xc00>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc8280xp-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + + power-domains = <&rpmhpd SC8280XP_GFX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpu_smmu: iommu@3da0000 { + compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + usb_0_hsphy: phy@88e5000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; @@ -2530,6 +2736,8 @@ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rxmacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "RX"; qcom,din-ports = <0>; @@ -2604,6 +2812,8 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; label = "WSA"; qcom,din-ports = <2>; @@ -2626,6 +2836,13 @@ status = "disabled"; }; + lpass_audiocc: clock-controller@32a9000 { + compatible = "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x032a9000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + swr2: soundwire-controller@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; @@ -2635,6 +2852,8 @@ clocks = <&txmacro>; clock-names = "iface"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "TX"; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2828,6 +3047,56 @@ }; }; + lpasscc: clock-controller@33e0000 { + compatible = "qcom,sc8280xp-lpasscc"; + reg = <0 0x033e0000 0 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sdc2: mmc@8804000 { + compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4e0 0x0>; + power-domains = <&rpmhpd SC8280XP_CX>; + operating-points-v2 = <&sdc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + }; + usb_0_qmpphy: phy@88eb000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; reg = <0 0x088eb000 0 0x4000>; @@ -2848,6 +3117,23 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_0_qmpphy_dp_in: endpoint {}; + }; + }; }; usb_1_hsphy: phy@8902000 { @@ -2884,6 +3170,23 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint {}; + }; + }; }; mdss1_dp0_phy: phy@8909a00 { @@ -3908,7 +4211,7 @@ #size-cells = <2>; ranges; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; reg = <0 0x17a40000 0 0x20000>; msi-controller; @@ -4720,6 +5023,36 @@ status = "disabled"; }; + + ethernet1: ethernet@23000000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x23000000 0x0 0x10000>, + <0x0 0x23016000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC1_AXI_CLK>, + <&gcc GCC_EMAC1_SLV_AHB_CLK>, + <&gcc GCC_EMAC1_PTP_CLK>, + <&gcc GCC_EMAC1_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x40 0xf>; + power-domains = <&gcc EMAC_1_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; }; sound: sound { diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 7459525d9982..0b23d5bb3f26 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -134,7 +134,7 @@ reg = <0>; adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -183,25 +183,25 @@ }; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l1a_1p225>; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&adv7533_in>; data-lanes = <0 1 2 3>; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vcca-supply = <&vreg_l1b_0p925>; }; -&mdss { - status = "okay"; -}; - &mmss_smmu { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 2ca713a3902a..3033723fc6ff 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -138,11 +138,6 @@ no-map; }; - reserved@85800000 { - reg = <0x00 0x85800000 0x00 0x3700000>; - no-map; - }; - cont_splash_mem: splash@9d400000 { reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; no-map; @@ -256,6 +251,10 @@ linux,code = <KEY_VOLUMEUP>; }; +&qhee_code { + reg = <0x00 0x85800000 0x00 0x3700000>; +}; + &qusb2phy0 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index eaead2f7beb4..bba0f366ef03 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -550,7 +550,7 @@ }; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -1463,8 +1463,8 @@ <&sleep_clk>, <&gcc GCC_MMSS_GPLL0_CLK>, <&gcc GCC_MMSS_GPLL0_DIV_CLK>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, <0>, <0>, <0>, @@ -1536,7 +1536,7 @@ port@0 { reg = <0>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; }; @@ -1572,7 +1572,7 @@ }; }; - dsi0: dsi@c994000 { + mdss_dsi0: dsi@c994000 { compatible = "qcom,sdm660-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c994000 0x400>; @@ -1586,8 +1586,8 @@ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, - <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -1608,7 +1608,7 @@ "pixel", "core"; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -1618,20 +1618,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@c994400 { + mdss_dsi0_phy: phy@c994400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c994400 0x100>, <0x0c994500 0x300>, @@ -1894,7 +1894,7 @@ }; }; - camss: camss@ca00000 { + camss: camss@ca00020 { compatible = "qcom,sdm660-camss"; reg = <0x0ca00020 0x10>, <0x0ca30000 0x100>, diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 70e683b7e4fc..301eca9a4f31 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -4,8 +4,10 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "sdm632.dtsi" #include "pm8953.dtsi" +#include "pmi632.dtsi" / { model = "Fairphone 3"; @@ -83,6 +85,33 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pmi632_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &sdhc_1 { status = "okay"; vmmc-supply = <&pm8953_l8>; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index f0f27fc12c18..f89b27c99f40 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -148,14 +148,14 @@ port@1 { reg = <1>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; &mdss { - dsi1: dsi@c996000 { + mdss_dsi1: dsi@c996000 { compatible = "qcom,sdm660-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c996000 0x400>; @@ -170,8 +170,8 @@ assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, - <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE1_CLK>, @@ -192,7 +192,7 @@ "pixel", "core"; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -202,20 +202,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@c996400 { + mdss_dsi1_phy: phy@c996400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c996400 0x100>, <0x0c996500 0x300>, @@ -239,10 +239,10 @@ <&sleep_clk>, <&gcc GCC_MMSS_GPLL0_CLK>, <&gcc GCC_MMSS_GPLL0_DIV_CLK>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, <0>, <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index b61e13db89bd..a1c207c0266d 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1282,6 +1282,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index d05c511718df..1ce413263b7f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -636,25 +636,6 @@ }; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - edp_brij_i2c: &i2c3 { status = "okay"; clock-frequency = <400000>; @@ -687,7 +668,7 @@ edp_brij_i2c: &i2c3 { port@0 { reg = <0>; sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -767,6 +748,25 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + /* * Cheza fw does not properly program the GPU aperture to allow the * GPU to update the SMMU pagetables for context switches. Work diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index e14fe9bbb386..d6b464cb61d6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -415,25 +415,6 @@ firmware-name = "qcom/sdm845/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -489,7 +470,15 @@ reg = <0>; lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&mdss_dsi1_out>; }; }; @@ -520,6 +509,53 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l1a_0p875>; + status = "okay"; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -649,10 +685,6 @@ }; }; -&pmi8998_rradc { - status = "okay"; -}; - /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { dai@22 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index d1440b790fa6..b2d4336e764b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -417,7 +417,43 @@ firmware-name = "qcom/sdm845/cdsp.mdt"; }; -&dsi0 { +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; @@ -448,33 +484,33 @@ port@0 { reg = <0>; truly_in_0: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; port@1 { reg = <1>; truly_in_1: endpoint { - remote-endpoint = <&dsi1_out>; + remote-endpoint = <&mdss_dsi1_out>; }; }; }; }; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vdds-supply = <&vdda_mipi_dsi0_pll>; }; -&dsi1 { +&mdss_dsi1 { status = "okay"; vdda-supply = <&vdda_mipi_dsi1_1p2>; qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; ports { port@1 { @@ -486,47 +522,11 @@ }; }; -&dsi1_phy { +&mdss_dsi1_phy { status = "okay"; vdds-supply = <&vdda_mipi_dsi1_pll>; }; -&gcc { - protected-clocks = <GCC_QSPI_CORE_CLK>, - <GCC_QSPI_CORE_CLK_SRC>, - <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <GCC_LPASS_Q6_AXI_CLK>, - <GCC_LPASS_SWAY_CLK>; -}; - -&gmu { - status = "okay"; -}; - -&gpu { - status = "okay"; - - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; -}; - -&i2c10 { - status = "okay"; - clock-frequency = <400000>; -}; - -&ipa { - qcom,gsi-loader = "self"; - memory-region = <&ipa_fw_mem>; - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 5c384345c05d..122c7128dea9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -336,44 +336,6 @@ firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - /* - * Both devices use different panels but all other properties - * are common. Compatible line is declared in device dts. - */ - display_panel: panel@0 { - status = "disabled"; - - reg = <0>; - - vddio-supply = <&vreg_l14a_1p88>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -452,6 +414,44 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + /* Modem/wifi */ &mss_pil { status = "okay"; @@ -480,7 +480,7 @@ }; }; -&pmi8998_rradc { +&pmi8998_charger { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 6cdda971bb4b..623a826b18a3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -51,6 +51,10 @@ }; }; +&pmi8998_charger { + monitored-battery = <&battery>; +}; + &sound { model = "OnePlus 6"; audio-routing = "RX_BIAS", "MCLK", diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index d82c0d4407f0..9471ada0d6ad 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -47,6 +47,10 @@ "AMIC5", "MIC BIAS3"; }; +&pmi8998_charger { + monitored-battery = <&battery>; +}; + /* * The TFA9894 codec is currently unsupported. * We need to delete the node to allow the soundcard diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 0ad891348e0c..dce0141f3719 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -411,44 +411,6 @@ firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - panel@0 { - compatible = "visionox,rm69299-shift"; - status = "okay"; - reg = <0>; - vdda-supply = <&vreg_l14a_1p88>; - vdd3p3-supply = <&vreg_l28a_3p0>; - - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active &sde_te_active>; - pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; - - port { - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in_0>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -494,6 +456,10 @@ }; }; +&i2c10 { + /* SMB1355@0x0C */ +}; + &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; @@ -505,6 +471,44 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + panel@0 { + compatible = "visionox,rm69299-shift"; + status = "okay"; + reg = <0>; + vdda-supply = <&vreg_l14a_1p88>; + vdd3p3-supply = <&vreg_l28a_3p0>; + + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active &sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; @@ -522,6 +526,12 @@ }; }; +&pmi8998_charger { + monitored-battery = <&battery>; + + status = "okay"; +}; + &pm8998_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -554,6 +564,28 @@ }; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <100000>; + flash-max-microamp = <1100000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>; + led-max-microamp = <100000>; + flash-max-microamp = <1100000>; + flash-max-timeout-us = <1280000>; + }; +}; + &qup_uart9_rx { drive-strength = <2>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 420ffede3e80..3bc187a066ae 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -368,43 +368,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vreg_l26a_1p2>; - status = "okay"; - - panel: panel@0 { - /* The compatible is assigned in device DTs. */ - reg = <0>; - - backlight = <&pmi8998_wled>; - vddio-supply = <&vreg_l14a_1p8>; - vsp-supply = <&lab>; - vsn-supply = <&ibb>; - panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; - touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; - pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; - pinctrl-names = "default", "sleep"; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vdds-supply = <&vreg_l1a_0p9>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -515,6 +478,43 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &pm8998_gpios { focus_n: focus-n-state { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 5ed975cc6ecb..9d6faeb65624 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -115,6 +115,14 @@ }; }; + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <4000000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + vreg_s4a_1p8: vreg-s4a-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_s4a_1p8"; @@ -223,39 +231,6 @@ firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - display_panel: panel@0 { - reg = <0>; - vddio-supply = <&vreg_l14a_1p8>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - backlight = <&pmi8998_wled>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - status = "disabled"; - - port { - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in_0>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -298,6 +273,39 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p8>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + status = "disabled"; + + port { + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; @@ -341,12 +349,14 @@ qcom,cabc; }; -&pm8998_resin { - linux,code = <KEY_VOLUMEDOWN>; +&pmi8998_charger { + monitored-battery = <&battery>; + status = "okay"; }; -&pmi8998_rradc { +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 8ae0ffccaab2..6db12abaa88d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -373,44 +373,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vdda_mipi_dsi0_1p2>; - status = "okay"; - - display_panel: panel@0 { - compatible = "jdi,fhd-nt35596s"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - vddio-supply = <&vreg_l14a_1p8>; - backlight = <&pmi8998_wled>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active>; - pinctrl-1 = <&sde_dsi_suspend>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vdds-supply = <&vdda_mipi_dsi0_pll>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -483,6 +445,7 @@ }; rmi4-f12@12 { + reg = <0x12>; syna,rezero-wait-ms = <0xc8>; syna,clip-x-high = <0x438>; syna,clip-y-high = <0x870>; @@ -504,6 +467,44 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; + + display_panel: panel@0 { + compatible = "jdi,fhd-nt35596s"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + vddio-supply = <&vreg_l14a_1p8>; + backlight = <&pmi8998_wled>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + &mss_pil { firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdeb05e95674..02a6ea0b8b2c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3899,6 +3899,7 @@ qspi: spi@88df000 { compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; reg = <0 0x088df000 0 0x600>; + iommus = <&apps_smmu 0x160 0x0>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -4238,7 +4239,7 @@ #reset-cells = <1>; }; - camss: camss@a00000 { + camss: camss@acb3000 { compatible = "qcom,sdm845-camss"; reg = <0 0x0acb3000 0 0x1000>, @@ -4509,14 +4510,14 @@ port@1 { reg = <1>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@2 { reg = <2>; dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; @@ -4616,7 +4617,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4638,12 +4639,12 @@ "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -4656,20 +4657,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4688,7 +4689,7 @@ status = "disabled"; }; - dsi1: dsi@ae96000 { + mdss_dsi1: dsi@ae96000 { compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; @@ -4710,12 +4711,12 @@ "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -4728,20 +4729,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@ae96400 { + mdss_dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4903,10 +4904,10 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -5137,6 +5138,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -5221,7 +5223,7 @@ }; slimbam: dma-controller@17184000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; num-channels = <31>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 1326c171fe72..cfbc4fc1eba9 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -311,25 +311,6 @@ status = "okay"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -422,7 +403,7 @@ port@0 { reg = <0>; sn65dsi86_in_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -475,6 +456,25 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts new file mode 100644 index 000000000000..cbe5cdf5a228 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "sdx75.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDX75 IDP"; + compatible = "qcom,sdx75-idp", "qcom,sdx75"; + + aliases { + serial0 = &uart1; + }; +}; + +&chosen { + stdout-path = "serial0:115200n8"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <110 6>; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi new file mode 100644 index 000000000000..21d5d55da5eb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX75 SoC device tree source + * + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + chosen: chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_OFF: cpu-sleep-0 { + compatible = "arm,idle-state"; + entry-latency-us = <235>; + exit-latency-us = <428>; + min-residency-us = <1774>; + arm,psci-suspend-param = <0x40000003>; + local-timer-stop; + }; + + CPU_RAIL_OFF: cpu-rail-sleep-1 { + compatible = "arm,idle-state"; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + arm,psci-suspend-param = <0x40000004>; + local-timer-stop; + }; + + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001344>; + entry-latency-us = <2761>; + exit-latency-us = <3964>; + min-residency-us = <8467>; + }; + + CLUSTER_SLEEP_2: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <2793>; + exit-latency-us = <4023>; + min-residency-us = <9826>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sdx75", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x800000>; + no-map; + }; + + hyp_elf_package_mem: hyp-elf-package@80800000 { + reg = <0x0 0x80800000 0x0 0x200000>; + no-map; + }; + + access_control_db_mem: access-control-db@81380000 { + reg = <0x0 0x81380000 0x0 0x80000>; + no-map; + }; + + qteetz_mem: qteetz@814e0000 { + reg = <0x0 0x814e0000 0x0 0x2a0000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@81780000 { + reg = <0x0 0x81780000 0x0 0xa00000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@87a00000 { + reg = <0x0 0x87a00000 0x0 0x1c0000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw@87c00000 { + reg = <0x0 0x87c00000 0x0 0x100000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog@87d00000 { + reg = <0x0 0x87d00000 0x0 0x40000>; + no-map; + }; + + xbl_sc_mem: xbl-sc@87d40000 { + reg = <0x0 0x87d40000 0x0 0x40000>; + no-map; + }; + + modem_efs_shared_mem: modem-efs-shared@87d80000 { + reg = <0x0 0x87d80000 0x0 0x10000>; + no-map; + }; + + aop_image_mem: aop-image@87e00000 { + reg = <0x0 0x87e00000 0x0 0x20000>; + no-map; + }; + + smem_mem: smem@87e20000 { + reg = <0x0 0x87e20000 0x0 0xc0000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@87ee0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x87ee0000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@87f00000 { + reg = <0x0 0x87f00000 0x0 0x20000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@87f20000 { + reg = <0x0 0x87f20000 0x0 0x10000>; + no-map; + }; + + secdata_mem: secdata@87f30000 { + reg = <0x0 0x87f30000 0x0 0x1000>; + no-map; + }; + + tme_crashdump_mem: tme-crashdump@87f31000 { + reg = <0x0 0x87f31000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@87f71000 { + reg = <0x0 0x87f71000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@87f75000 { + reg = <0x0 0x87f75000 0x0 0x10000>; + no-map; + }; + + qdss_mem: qdss@88800000 { + reg = <0x0 0x88800000 0x0 0x300000>; + no-map; + }; + + audio_heap_mem: audio-heap@88b00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x88b00000 0x0 0x400000>; + no-map; + }; + + mpss_dsmharq_mem: mpss-dsmharq@88f00000 { + reg = <0x0 0x88f00000 0x0 0x5080000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 { + reg = <0x0 0x8df80000 0x0 0x80000>; + no-map; + }; + + mpssadsp_mem: mpssadsp@8e000000 { + reg = <0x0 0x8e000000 0x0 0xf400000>; + no-map; + }; + + gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 { + reg = <0x0 0xbdb00000 0x0 0x2000000>; + no-map; + }; + + smmu_debug_buf_mem: smmu-debug-buf@bfb00000 { + reg = <0x0 0xbfb00000 0x0 0x100000>; + no-map; + }; + + hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 { + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@80000 { + compatible = "qcom,sdx75-gcc"; + reg = <0x0 0x0080000 0x0 0x1f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart1: serial@984000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qupv3_se1_2uart_active>; + pinctrl-1 = <&qupv3_se1_2uart_sleep>; + pinctrl-names = "default", + "sleep"; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sdx75-pdc", "qcom,pdc"; + reg = <0x0 0xb220000 0x0 0x30000>, + <0x0 0x174000f0 0x0 0x64>; + qcom,pdc-ranges = <0 147 52>, + <52 266 32>, + <84 500 59>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sdx75-tlmm"; + reg = <0x0 0x0f000000 0x0 0x400000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 133>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qupv3_se1_2uart_active: qupv3-se1-2uart-active-state { + tx-pins { + pins = "gpio12"; + function = "qup_se1_l2_mira"; + drive-strength= <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio13"; + function = "qup_se1_l3_mira"; + drive-strength= <2>; + bias-disable; + }; + }; + + qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx75-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17200000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + reg = <0x0 0x17200000 0x0 0x10000>, + <0x0 0x17260000 0x0 0x80000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17420000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&CLUSTER_PD>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, + <SLEEP_TCS 2>, + <WAKE_TCS 2>, + <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sdx75-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x17d91000 0x0 0x1000>; + reg-names = "freq-domain0"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GPLL0>; + clock-names = "xo", + "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a1f0622db5a0..75951fd439df 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -242,6 +242,9 @@ &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts new file mode 100644 index 000000000000..3ce9875e932c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + */ + +/dts-v1/; + +#include "sm6115.dtsi" +#include "pm6125.dtsi" +#include <dt-bindings/arm/qcom,ids.h> + +/ { + model = "F(x)tec Pro1X (QX1050)"; + compatible = "fxtec,pro1x", "qcom,sm6115"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM6115 0x10000>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; + width = <1080>; + height = <2160>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s6a: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + pm6125_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + pm6125_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + pm6125_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + pm6125_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + pm6125_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + pm6125_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + pm6125_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + pm6125_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + pm6125_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + pm6125_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l23a: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-allow-set-load; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <14 4>; +}; + +&ufs_mem_hc { + vcc-supply = <&pm6125_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&pm6125_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vddp-ref-clk-supply = <&pm6125_l18a>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vdda-phy-dpdm-supply = <&pm6125_l15a>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 43f31c1b9d5a..55118577bf92 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -47,6 +47,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -64,6 +66,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -76,6 +80,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -88,6 +94,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; CPU4: cpu@100 { @@ -100,6 +108,8 @@ dynamic-power-coefficient = <282>; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -117,6 +127,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; }; CPU6: cpu@102 { @@ -129,6 +141,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; }; CPU7: cpu@103 { @@ -141,6 +155,8 @@ enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; }; cpu-map { @@ -180,6 +196,68 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <297>; + exit-latency-us = <324>; + min-residency-us = <1110>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_0_SLEEP_0: cluster-sleep-0-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000022>; + entry-latency-us = <360>; + exit-latency-us = <421>; + min-residency-us = <782>; + }; + + CLUSTER_0_SLEEP_1: cluster-sleep-0-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + + CLUSTER_1_SLEEP_0: cluster-sleep-1-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000042>; + entry-latency-us = <314>; + exit-latency-us = <345>; + min-residency-us = <660>; + }; + + CLUSTER_1_SLEEP_1: cluster-sleep-1-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <640>; + exit-latency-us = <1654>; + min-residency-us = <8094>; + }; + }; }; firmware { @@ -203,6 +281,64 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_0_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>; + }; + + CLUSTER_1_PD: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>; + }; }; reserved_memory: reserved-memory { @@ -663,6 +799,62 @@ status = "disabled"; }; + cryptobam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01b04000 0x0 0x24000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + + crypto: crypto@1b3a000 { + compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0 0x01b3a000 0x0 0x6000>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x92 0>, + <&apps_smmu 0x94 0x11>, + <&apps_smmu 0x96 0x11>, + <&apps_smmu 0x98 0x1>, + <&apps_smmu 0x9F 0>; + }; + + usb_qmpphy: phy@1615000 { + compatible = "qcom,sm6115-qmp-usb3-phy"; + reg = <0x0 0x01615000 0x0 0x1000>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "cfg_ahb", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; + reset-names = "phy", "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; reg = <0x0 0x01b40000 0x0 0x7000>; @@ -700,7 +892,7 @@ #interrupt-cells = <4>; }; - tsens0: thermal-sensor@4410000 { + tsens0: thermal-sensor@4411000 { compatible = "qcom,sm6115-tsens", "qcom,tsens-v2"; reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */ <0x0 0x04410000 0x0 0x8>; /* SROT */ @@ -1113,8 +1305,8 @@ compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_hsphy>; - phy-names = "usb2-phy"; + phys = <&usb_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index ea3340d31110..81fdcaf48926 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -306,6 +306,9 @@ &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index b1038eb8cebc..a7f4aeae9c1a 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -138,7 +138,7 @@ pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; - adc-chan@4d { + channel@4d { reg = <ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -146,7 +146,7 @@ label = "rf_pa0_therm"; }; - adc-chan@4e { + channel@4e { reg = <ADC5_AMUX_THM2_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -154,7 +154,7 @@ label = "quiet_therm"; }; - adc-chan@52 { + channel@52 { reg = <ADC5_GPIO1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -162,7 +162,7 @@ label = "camera_flash_therm"; }; - adc-chan@54 { + channel@54 { reg = <ADC5_GPIO3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 2aa093d16858..a596baa6ce3e 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -366,7 +366,7 @@ hwlocks = <&tcsr_mutex 3>; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x00 0xffffffff>; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index ad34301f6cdd..30e77010aed5 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -56,6 +56,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -84,6 +86,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -107,6 +111,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -130,6 +136,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -153,6 +161,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -176,6 +186,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -199,6 +211,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -222,6 +236,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -266,6 +282,76 @@ }; }; }; + + domain-idle-states { + CLUSTER_SLEEP_PC: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + CLUSTER_SLEEP_CX_RET: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001244>; + entry-latency-us = <3638>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + CLUSTER_AOSS_SLEEP: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + + cpu_idle_states: idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; }; firmware { @@ -387,6 +473,25 @@ }; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>; @@ -395,6 +500,61 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_PC + &CLUSTER_SLEEP_CX_RET + &CLUSTER_AOSS_SLEEP>; + }; }; reserved_memory: reserved-memory { @@ -750,6 +910,22 @@ status = "disabled"; }; + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM6350_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; reg = <0 0x00888000 0 0x4000>; @@ -1735,6 +1911,34 @@ drive-strength = <2>; bias-pull-up; }; + + qup_uart1_cts: qup-uart1-cts-default-state { + pins = "gpio61"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart1_rts: qup-uart1-rts-default-state { + pins = "gpio62"; + function = "qup01"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart1_rx: qup-uart1-rx-default-state { + pins = "gpio64"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart1_tx: qup-uart1-tx-default-state { + pins = "gpio63"; + function = "qup01"; + drive-strength = <2>; + bias-pull-up; + }; }; apps_smmu: iommu@15000000 { @@ -1900,28 +2104,6 @@ }; }; - wifi: wifi@18800000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0 0x18800000 0 0x800000>; - reg-names = "membase"; - memory-region = <&wlan_fw_mem>; - interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x20 0x1>; - qcom,msa-fixed-perm; - status = "disabled"; - }; - apps_rsc: rsc@18200000 { compatible = "qcom,rpmh-rsc"; label = "apps_rsc"; @@ -1936,6 +2118,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm6350-rpmh-clk"; @@ -2019,6 +2202,28 @@ #freq-domain-cells = <1>; #clock-cells = <1>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_fw_mem>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index f8d9c34d3b2f..3dba34210a6d 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,sm6375-gcc.h> +#include <dt-bindings/clock/qcom,sm6375-gpucc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -1276,6 +1277,42 @@ }; }; + adreno_smmu: iommu@5940000 { + compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x05940000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "bus"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gpucc: clock-controller@5990000 { + compatible = "qcom,sm6375-gpucc"; + reg = <0 0x05990000 0 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + power-domains = <&rpmpd SM6375_VDDGX>; + required-opps = <&rpmpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + remoteproc_mss: remoteproc@6000000 { compatible = "qcom,sm6375-mpss-pas"; reg = <0 0x06000000 0 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 7ae6aba5d2ec..e3dc49951523 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -31,6 +31,7 @@ aliases { serial0 = &uart9; + serial1 = &uart1; }; chosen { @@ -524,6 +525,39 @@ }; }; +&qup_uart1_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart1_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart1_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart1_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + &qupv3_id_0 { status = "okay"; }; @@ -561,6 +595,75 @@ &tlmm { gpio-reserved-ranges = <13 4>, <56 2>; + + qup_uart1_sleep_cts: qup-uart1-sleep-cts-state { + pins = "gpio61"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart1_sleep_rts: qup-uart1-sleep-rts-state { + pins = "gpio62"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart1_sleep_rx: qup-uart1-sleep-rx-state { + pins = "gpio64"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart1_sleep_tx: qup-uart1-sleep-tx-state { + pins = "gpio63"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; +}; + +&uart1 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 64 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart1_sleep_cts>, <&qup_uart1_sleep_rts>, <&qup_uart1_sleep_tx>, <&qup_uart1_sleep_rx>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&vreg_l11a>; + vddxo-supply = <&vreg_l7a>; + vddrf-supply = <&vreg_l2e>; + vddch0-supply = <&vreg_l10e>; + swctrl-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + + max-speed = <3200000>; + }; }; &uart9 { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 47e2430991ca..baafea53770b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8150.dtsi" #include "pm8150.dtsi" @@ -81,6 +82,66 @@ }; }; + cam0_vdig_vreg: cam0-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera0_vdig_vreg"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam1_vdig_vreg: cam1-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera1_vdig_vreg"; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&sub_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam2_vdig_vreg: cam2-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera2_vdig_vreg"; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam3_vdig_vreg: cam3-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera3_vdig_vreg"; + gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&supwc_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vmdr_vreg: cam-vmdr-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera_vmdr_vreg"; + gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_vmdr_en>; + pinctrl-names = "default"; + }; + + rgbcir_vreg: rgbcir-regulator { + compatible = "regulator-fixed"; + regulator-name = "rgbcir_vreg"; + gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rgbc_ir_pwr_en>; + pinctrl-names = "default"; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -456,6 +517,17 @@ }; &pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "", + "NC", + "NC", + "", + "NC", + "SUPWC_PWR_EN", + "", + "NC", + "NC"; /* GPIO_10 */ + vol_down_n: vol-down-n-state { pins = "gpio1"; function = "normal"; @@ -463,9 +535,31 @@ bias-pull-up; input-enable; }; + + supwc_pwr_en: supwc-pwr-en-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <1>; + power-source = <1>; + drive-push-pull; + output-low; + }; }; &pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "TS_VDDH_EN", + "LCD_ID", + "", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; + snapshot_n: snapshot-n-state { pins = "gpio1"; function = "normal"; @@ -483,6 +577,30 @@ }; }; +&pm8150l_gpios { + gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */ + "NC", + "MAIN_CAM_PWR_VMDR_EN", + "NC", + "", + "NC", + "NC", + "FP_LDO_EN", + "NC", + "NC", /* GPIO_10 */ + "NC", + "NC"; + + main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state { + pins = "gpio3"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -500,8 +618,225 @@ status = "okay"; }; +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <126 4>; + gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", + "NFC_ESE_SPI_CS_N", + "NC", + "NC", + "DISP_RESET_N", + "DEBUG_GPIO0", + "MDP_VSYNC_P", + "TS_I2C_SDA", + "TS_I2C_SCL", /* GPIO_10 */ + "CAM_SOF", + "CAM2_RST_N", + "CAM_MCLK0", + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "NC", + "MAIN_CAM_PWR_EN", + "CAM3_RST_N", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "NC", + "CAM0_RST_N", + "RGBC_IR_PWR_EN", + "CAM1_RST_N", /* GPIO_30 */ + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "NC", + "DEBUG_GPIO1", + "RGBC_IR_INT", + "USB_CC_DIR", + "NC", + "NC", /* GPIO_40 */ + "NFC_EN", + "NFC_ESE_PWR_REQ", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "NFC_IRQ", + "NFC_DWL_REQ", + "UIM2_DETECT_EN", + "WLAN_SW_CTRL", /* GPIO_50 */ + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "NC", + "TS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "HW_ID_0", + "NC", /* GPIO_60 */ + "QLINK_REQUEST", + "QLINK_ENABLE", + "WMSS_RESET_N", + "SDM_GRFC_8", + "WDOG_DISABLE", + "NC", + "NC", + "PA_INDICATOR_OR", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", /* GPIO_70 */ + "SDM_RFFE0_DATA", + "SDM_RFFE0_CLK", + "SDM_RFFE1_DATA", + "SDM_RFFE1_CLK", + "SDM_RFFE2_DATA", + "SDM_RFFE2_CLK", + "SDM_RFFE3_DATA", + "SDM_RFFE3_CLK", + "SUB_CAM_PWR_EN", + "FP_RESET_N", /* GPIO_80 */ + "NC", + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DVDT_WRT_DET_AND", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "UDON_SWITCH_SEL", + "SD_CARD_DET_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "USB_AUDIO_EN1", /* GPIO_100 */ + "DISP_ERR_FG", + "NC", + "NC", + "NC", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_DET", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NFC_CLK_REQ", + "SW_SERVICE", + "NC", + "RF_ID_EXTENSION", + "ALS_PROX_INT_N", + "FP_INT", + "DVDT_WRT_DET_OR", + "BAROMETER_INT", /* GPIO_120 */ + "ACC_COVER_OPEN", + "TS_INT_N", + "CODEC_INT1_N", + "CODEC_INT2_N", + "TX_GTR_THRES_IN", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "NC", /* GPIO_130 */ + "DVDT_ENABLE", + "ACCEL_INT", + "NC", + "MAG_INT_N", + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "HW_ID_1", + "NC", /* GPIO_140 */ + "NC", + "NC", + "CODEC_RST_N", + "CDC_SPI_MISO", + "CDC_SPI_MOSI", + "CDC_SPI_SCLK", + "CDC_SPI_CS_N", + "NC", + "LPASS_SLIMBUS_CLK", + "LPASS_SLIMBUS_DATA0", /* GPIO_150 */ + "LPASS_SLIMBUS_DATA1", + "USB_AUDIO_EN2", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "COMPASS_I2C_SDA", + "COMPASS_I2C_SCL", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", /* GPIO_160 */ + "SSC_SENSOR_I2C_SDA", + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "SSC_UART_1_TX", + "SSC_UART_1_RX", + "WL_CMD_CLK_CHAIN0", + "WL_CMD_DATA_CHAIN0", /* GPIO_170 */ + "WL_CMD_CLK_CHAIN1", + "WL_CMD_DATA_CHAIN1", + "WL_BT_COEX_CLK", + "WL_BT_COEX_DATA"; + + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sub_cam_pwr_en: sub-cam-pwr-en-state { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart2 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 27dcda0d4288..18c822abdb88 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -55,8 +55,8 @@ next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -84,8 +84,8 @@ next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -108,8 +108,8 @@ next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -132,8 +132,8 @@ next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -156,8 +156,8 @@ next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -180,8 +180,8 @@ next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -204,8 +204,8 @@ next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -228,8 +228,8 @@ next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -1362,14 +1362,11 @@ uart9: serial@a84000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00a84000 0x0 0x4000>; - reg-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart9_default>; pinctrl-names = "default"; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1763,49 +1760,49 @@ config_noc: interconnect@1500000 { compatible = "qcom,sm8150-config-noc"; reg = <0 0x01500000 0 0x7400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8150-system-noc"; reg = <0 0x01620000 0 0x19400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163a000 { compatible = "qcom,sm8150-mc-virt"; reg = <0 0x0163a000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8150-aggre1-noc"; reg = <0 0x016e0000 0 0xd080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8150-aggre2-noc"; reg = <0 0x01700000 0 0x20000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1720000 { compatible = "qcom,sm8150-compute-noc"; reg = <0 0x01720000 0 0x7000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8150-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -1826,7 +1823,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8150"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -1921,7 +1918,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8150"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -2097,6 +2094,36 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <8>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x502 0x0641>, + <&apps_smmu 0x504 0x0011>, + <&apps_smmu 0x506 0x0011>, + <&apps_smmu 0x508 0x0011>, + <&apps_smmu 0x512 0x0000>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -3520,14 +3547,14 @@ dc_noc: interconnect@9160000 { compatible = "qcom,sm8150-dc-noc"; reg = <0 0x09160000 0 0x3200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9680000 { compatible = "qcom,sm8150-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3568,6 +3595,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3617,6 +3648,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; @@ -3632,7 +3667,7 @@ camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3641,8 +3676,8 @@ reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -3986,7 +4021,7 @@ }; apps_smmu: iommu@15000000 { - compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -4307,7 +4342,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - #interconnect-cells = <1>; + #interconnect-cells = <2>; }; cpufreq_hw: cpufreq@18323000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 2f22d348d45d..8ab82bacba81 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -26,9 +26,10 @@ framebuffer: framebuffer@9c000000 { compatible = "simple-framebuffer"; reg = <0 0x9c000000 0 0x2300000>; - width = <1644>; - height = <3840>; - stride = <(1644 * 4)>; + /* pdx203 BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; format = "a8r8g8b8"; /* * That's a lot of clocks, but it's necessary due @@ -672,3 +673,8 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p9>; }; + +&venus { + firmware-name = "qcom/sm8250/Sony/edo/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 8af6a0120a50..b841ea9192ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -470,76 +470,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vreg_l9a_1p2>; - qcom,dual-dsi-mode; - qcom,sync-dual-dsi; - qcom,master-dsi; - status = "okay"; - - display_panel: panel@0 { - reg = <0>; - vddio-supply = <&vreg_l14a_1p88>; - reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; - backlight = <&backlight>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1{ - reg = <1>; - - panel_in_1: endpoint { - remote-endpoint = <&dsi1_out>; - }; - }; - - }; - }; -}; - -&dsi0_out { - data-lanes = <0 1 2>; - remote-endpoint = <&panel_in_0>; -}; - -&dsi0_phy { - vdds-supply = <&vreg_l5a_0p88>; - phy-type = <PHY_TYPE_CPHY>; - status = "okay"; -}; - -&dsi1 { - vdda-supply = <&vreg_l9a_1p2>; - qcom,dual-dsi-mode; - qcom,sync-dual-dsi; - /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; - status = "okay"; -}; - -&dsi1_out { - data-lanes = <0 1 2>; - remote-endpoint = <&panel_in_1>; -}; - -&dsi1_phy { - vdds-supply = <&vreg_l5a_0p88>; - phy-type = <PHY_TYPE_CPHY>; - status = "okay"; -}; - &gmu { status = "okay"; }; @@ -608,6 +538,75 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + status = "okay"; +}; + +&mdss_dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 7bea916900e2..83ab6de459bc 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -106,8 +106,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -137,8 +137,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -162,8 +162,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -187,8 +187,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -212,8 +212,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -237,8 +237,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -262,8 +262,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -287,8 +287,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -1789,49 +1789,49 @@ config_noc: interconnect@1500000 { compatible = "qcom,sm8250-config-noc"; reg = <0 0x01500000 0 0xa580>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8250-system-noc"; reg = <0 0x01620000 0 0x1c200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163d000 { compatible = "qcom,sm8250-mc-virt"; reg = <0 0x0163d000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8250-aggre1-noc"; reg = <0 0x016e0000 0 0x1f180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8250-aggre2-noc"; reg = <0 0x01700000 0 0x33000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1733000 { compatible = "qcom,sm8250-compute-noc"; reg = <0 0x01733000 0 0xa180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8250-mmss-noc"; reg = <0 0x01740000 0 0x1f080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2232,6 +2232,38 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <8>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x592 0x0000>, + <&apps_smmu 0x598 0x0000>, + <&apps_smmu 0x599 0x0000>, + <&apps_smmu 0x59f 0x0000>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8250-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x592 0x0000>, + <&apps_smmu 0x598 0x0000>, + <&apps_smmu 0x599 0x0000>, + <&apps_smmu 0x59f 0x0000>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x596 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -3661,21 +3693,21 @@ dc_noc: interconnect@90c0000 { compatible = "qcom,sm8250-dc-noc"; reg = <0 0x090c0000 0 0x4200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9100000 { compatible = "qcom,sm8250-gem-noc"; reg = <0 0x09100000 0 0xb4000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sm8250-npu-noc"; reg = <0 0x09990000 0 0x1600>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3718,6 +3750,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3778,6 +3814,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; @@ -3805,8 +3845,8 @@ <&videocc VIDEO_CC_MVS0_CLK>; clock-names = "iface", "core", "vcodec0_core"; - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, - <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cpu-cfg", "video-mem"; iommus = <&apps_smmu 0x2100 0x0400>; @@ -4090,10 +4130,10 @@ <&apps_smmu 0xc40 0x400>, <&apps_smmu 0xc41 0x400>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, - <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cam_ahb", "cam_hf_0_mnoc", "cam_sf_0_mnoc", @@ -4150,8 +4190,8 @@ reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -4202,14 +4242,14 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@1 { reg = <1>; dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; @@ -4239,7 +4279,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4262,12 +4302,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -4280,14 +4320,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -4312,7 +4352,7 @@ }; }; - dsi0_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4331,7 +4371,7 @@ status = "disabled"; }; - dsi1: dsi@ae96000 { + mdss_dsi1: dsi@ae96000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; @@ -4354,12 +4394,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -4372,20 +4412,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@ae96400 { + mdss_dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4411,10 +4451,10 @@ power-domains = <&rpmhpd SM8250_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -5254,7 +5294,7 @@ }; apps_smmu: iommu@15000000 { - compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -5639,7 +5679,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - #interconnect-cells = <1>; + #interconnect-cells = <2>; }; cpufreq_hw: cpufreq@18591000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 2ee1b121686a..61dd9663fabe 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -58,7 +58,15 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; }; }; }; @@ -326,6 +334,37 @@ }; }; +&i2c13 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + &i2c15 { clock-frequency = <400000>; status = "okay"; @@ -370,8 +409,19 @@ status = "okay"; }; -&mdss_mdp { +&mdss_dp { status = "okay"; + + ports { + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; + }; }; &mpss { @@ -416,6 +466,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &qupv3_id_2 { status = "okay"; }; @@ -716,7 +770,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -732,6 +786,20 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p88>; + + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &usb_2 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 3efdc03ed0f1..88ef478cb5cc 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -907,7 +907,7 @@ }; }; - gpi_dma0: dma-controller@900000 { + gpi_dma0: dma-controller@9800000 { compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x09800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, @@ -1638,7 +1638,7 @@ status = "disabled"; }; - pcie1_phy: phy@1c0f000 { + pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy"; reg = <0 0x01c0e000 0 0x2000>; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, @@ -1735,6 +1735,28 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8350-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + ipa: ipa@1e40000 { compatible = "qcom,sm8350-ipa"; @@ -2140,7 +2162,7 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8350-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -2158,6 +2180,32 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; usb_2_qmpphy: phy-wrapper@88eb000 { @@ -2256,6 +2304,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -2325,6 +2377,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index e931545a2cac..bc4c125d1832 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -114,9 +114,18 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_1_qmpphy_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; }; }; @@ -494,6 +503,37 @@ }; }; +&i2c5 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + &mdss { status = "okay"; }; @@ -513,8 +553,19 @@ status = "okay"; }; -&mdss_mdp { +&mdss_dp0 { status = "okay"; + + ports { + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; + }; }; &pcie0 { @@ -766,7 +817,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -782,6 +833,20 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p91>; + + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &vamacro { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d59ea8ee7111..5cd7296c7660 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/clock/qcom,sm8450-dispcc.h> +#include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -2053,6 +2054,32 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; remoteproc_slpi: remoteproc@2400000 { @@ -2581,6 +2608,18 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8450-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + cci0: cci@ac15000 { compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; reg = <0 0x0ac15000 0 0x1000>; @@ -4002,31 +4041,43 @@ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp5 { + rpmhpd_opp_low_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp6 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp6 { + rpmhpd_opp_svs_l0: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp8 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp7 { + rpmhpd_opp_svs_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + rpmhpd_opp_nom: opp10 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp8 { + rpmhpd_opp_nom_l1: opp11 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp9 { + rpmhpd_opp_nom_l2: opp12 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp10 { + rpmhpd_opp_turbo: opp13 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp11 { + rpmhpd_opp_turbo_l1: opp14 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; @@ -4147,6 +4198,34 @@ }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + }; + + crypto: crypto@1de0000 { + compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + sdhc_2: mmc@8804000 { compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -4227,6 +4306,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index e2b9bb6b1e27..ec86c5f38045 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -23,6 +23,32 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -61,6 +87,87 @@ }; }; + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -393,8 +500,22 @@ }; }; -&dispcc { - status = "okay"; +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &mdss { @@ -437,10 +558,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; @@ -535,6 +652,58 @@ clock-frequency = <32000>; }; +&swr0 { + status = "okay"; + + /* WSA8845 */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + + /* WSA8845 */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; @@ -565,6 +734,14 @@ drive-strength = <2>; bias-pull-down; }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index d5a645ee2a61..ec4feee6837d 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8550.dtsi" #include "pm8010.dtsi" @@ -23,10 +24,167 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -359,6 +517,176 @@ }; }; +&gcc { + clocks = <&bi_tcxo_div2>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <0>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; + pinctrl-names = "default", "sleep"; + + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + vddio-supply = <&vreg_l12b_1p8>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + status = "disabled"; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -385,8 +713,96 @@ clock-frequency = <32000>; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active: sde-te-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_suspend: sde-te-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { @@ -417,13 +833,24 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&pm8550b_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 558cbc430708..41d60af93692 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -4,7 +4,9 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> +#include <dt-bindings/clock/qcom,sm8550-gpucc.h> #include <dt-bindings/clock/qcom,sm8550-tcsr.h> #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -1848,7 +1850,7 @@ }; cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0x0 0x01dc4000 0x0 0x28000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -1858,7 +1860,7 @@ <&apps_smmu 0x481 0x0>; }; - crypto: crypto@1de0000 { + crypto: crypto@1dfa000 { compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce"; reg = <0x0 0x01dfa000 0x0 0x6000>; dmas = <&cryptobam 4>, <&cryptobam 5>; @@ -1960,6 +1962,17 @@ #reset-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8550-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8550-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -2394,6 +2407,18 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8550-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -2470,6 +2495,13 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -2497,6 +2529,84 @@ }; }; + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm8550-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8550_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dp0_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -2680,8 +2790,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, /* dp0 */ - <0>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ <0>, <0>, /* dp2 */ @@ -2693,7 +2803,6 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - status = "disabled"; }; usb_1_hsphy: phy@88e3000 { @@ -2769,6 +2878,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + status = "disabled"; usb_1_dwc3: usb@a600000 { @@ -2883,7 +2996,7 @@ #interrupt-cells = <4>; }; - tlmm: pinctrl@f000000 { + tlmm: pinctrl@f100000 { compatible = "qcom,sm8550-tlmm"; reg = <0 0x0f100000 0 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -3597,6 +3710,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, <WAKE_TCS 2>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -3617,43 +3731,63 @@ rpmhpd_opp_table: opp-table { compatible = "operating-points-v2"; - rpmhpd_opp_ret: opp1 { + rpmhpd_opp_ret: opp-16 { opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; }; - rpmhpd_opp_min_svs: opp2 { + rpmhpd_opp_min_svs: opp-48 { opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; }; - rpmhpd_opp_low_svs: opp3 { + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp4 { + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp5 { + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp6 { + rpmhpd_opp_nom: opp-256 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp7 { + rpmhpd_opp_nom_l1: opp-320 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp8 { + rpmhpd_opp_nom_l2: opp-336 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp9 { + rpmhpd_opp_turbo: opp-384 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp10 { + rpmhpd_opp_turbo_l1: opp-416 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; |