diff options
| author | Marek Vasut <marek.vasut@gmail.com> | 2018-11-04 21:37:07 +0100 |
|---|---|---|
| committer | Simon Horman <horms+renesas@verge.net.au> | 2018-11-06 13:13:26 +0100 |
| commit | 5f65328df3f5cd25af741638153929d3c7ad4d8a (patch) | |
| tree | 95fc418501a4c40c06da86e63687805f7a34086e /arch/arm64/boot/dts/renesas/ulcb.dtsi | |
| parent | b7a1da2193e635373a80238137720e86e8ff4119 (diff) | |
arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is
connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
the pinmux to match the bus, which is always operating in 1.8V mode.
While at it, deduplicate the pinmux entries, which are now the same for
both default and UHS modes. We still need the two pinctrl entries to
match the bindings though.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Diffstat (limited to 'arch/arm64/boot/dts/renesas/ulcb.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/ulcb.dtsi | 8 |
1 files changed, 1 insertions, 7 deletions
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 89daca7356df..de694fdae067 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -332,12 +332,6 @@ sdhi2_pins: sd2 { groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; - function = "sdhi2"; power-source = <1800>; }; @@ -426,7 +420,7 @@ &sdhi2 { /* used for on-board 8bit eMMC */ pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-1 = <&sdhi2_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <®_3p3v>; |