Merge tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony
Lindgren:

Wireless and omap changes to make wl12xx driver to use device tree
data instead of platform data from Eliad Peller <eliad@wizery.com>:

- Add device-tree support to the wlcore (wl12xx/wl18xx) driver.

- Update the current users to use the bindings instead of pdata-quirks.

- Finally, remove the deprecated wl12xx_platform_data struct

Note that da850 board file code that still uses the platform data,
but we have da850.dtsi that can be used instead. So it was decided
that we should try to remove the wl12xx support from the da850
board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's
the last patch in the series, the last patch can be simply reverted
if needed.

As this series touches quite a bit of arch code, it was suggested
by Kalle Valo <kvalo@codeaurora.org> that the whole series should
be merged via the arm-soc tree.

* tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  wlcore: remove wl12xx_platform_data
  ARM: dts: add wl12xx/wl18xx bindings
  wlcore: add device-tree support
  dt: bindings: add TI's wilink wireless device
  wl12xx: use frequency instead of enumerations for pdata clocks
  wlcore: set irq_trigger in board files instead of hiding behind a quirk
  + Linux 4.0-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

82 files changed, 928 insertions, 371 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7f99cd652203..eb7bb511f853 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
 machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EFM32)		+= efm32
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 2c6248d9a9ef..c3255e0c90aa 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -301,3 +301,11 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 };
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 83d40f7655e5..6b8493720424 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -24,11 +24,3 @@
 &mmc1 {
 	vmmc-supply = <&ldo3_reg>;
 };
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index df5fee6b6b4b..87fc7a35e802 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -15,6 +15,7 @@
 
 #include "am33xx.dtsi"
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "TI AM335x EVM-SK";
@@ -647,6 +648,16 @@
 	cap-power-off-card;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &mcasp1 {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 7266a00aab2e..5c5667a3624d 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -328,6 +328,10 @@
 	dual_emac_res_vlan = <3>;
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index 712edce7d6fb..071b56aa0c7e 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -99,7 +99,7 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
@@ -107,7 +107,7 @@
 	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
@@ -115,7 +115,7 @@
 	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c7dc9dab93a4..cfb49686ab6a 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -107,7 +107,7 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
@@ -115,7 +115,7 @@
 	ehrpwm1_tbclk: ehrpwm1_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
@@ -123,7 +123,7 @@
 	ehrpwm2_tbclk: ehrpwm2_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
@@ -131,7 +131,7 @@
 	ehrpwm3_tbclk: ehrpwm3_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
@@ -139,7 +139,7 @@
 	ehrpwm4_tbclk: ehrpwm4_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
@@ -147,7 +147,7 @@
 	ehrpwm5_tbclk: ehrpwm5_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index ac2c5dd03663..e7f0a4ae271c 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -853,7 +853,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index e247b0b5fdab..d55fdf2487ef 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -124,11 +124,12 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9261-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&usb>, <&udc_clk>, <&udpck>;
-				clock-names = "usb_clk", "udc_clk", "udpck";
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
 				status = "disabled";
 			};
 
@@ -262,7 +263,7 @@
 			};
 
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix";
+				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 088219d1c8ce..fce301c4e9d6 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -856,7 +856,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9263-udc";
 				reg = <0xfff78000 0x4000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 119893181189..488af63d5174 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1300,7 +1300,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e77c9bb5485d..d221179d0f1a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1066,7 +1066,7 @@
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&usb>, <&udphs_clk>;
+				clocks = <&utmi>, <&udphs_clk>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 
@@ -1185,7 +1185,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 746cddb1b8f5..1933ce821311 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -263,17 +263,15 @@
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
-			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
-			0x418   (MUX_MODE15)	/* wakeup0.off */
+			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4d8711713610..48dbf0b03966 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -119,17 +119,15 @@
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
-			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			0x418   (PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
-			0x418   (MUX_MODE15)	/* wakeup0.off */
+			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2a9994f73974..3b933f74d000 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -243,10 +243,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_core_byp_mux: dpll_core_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
 	dpll_core_ck: dpll_core_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
@@ -309,10 +317,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_dsp_byp_mux: dpll_dsp_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0240>;
+	};
+
 	dpll_dsp_ck: dpll_dsp_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
 	};
 
@@ -335,10 +351,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_iva_byp_mux: dpll_iva_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
 	dpll_iva_ck: dpll_iva_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
@@ -361,10 +385,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_gpu_byp_mux: dpll_gpu_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02e4>;
+	};
+
 	dpll_gpu_ck: dpll_gpu_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
 	};
 
@@ -398,10 +430,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_ddr_byp_mux: dpll_ddr_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x021c>;
+	};
+
 	dpll_ddr_ck: dpll_ddr_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
@@ -416,10 +456,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_gmac_byp_mux: dpll_gmac_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02b4>;
+	};
+
 	dpll_gmac_ck: dpll_gmac_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
@@ -482,10 +530,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_eve_byp_mux: dpll_eve_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0290>;
+	};
+
 	dpll_eve_ck: dpll_eve_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
@@ -1249,10 +1305,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_per_byp_mux: dpll_per_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
 	dpll_per_ck: dpll_per_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
@@ -1275,10 +1339,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_usb_byp_mux: dpll_usb_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
 	dpll_usb_ck: dpll_usb_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 277b48b0b6f9..ac6b0ae42caf 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -18,6 +18,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
 
 / {
@@ -193,6 +194,7 @@
 			interrupts = <0 216 0>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
new file mode 100644
index 000000000000..735cb2f10817
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Device tree sources for Exynos4 thermal zone
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		thermal-sensors = <&tmu 0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			cpu_alert0: cpu-alert-0 {
+				temperature = <70000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert1: cpu-alert-1 {
+				temperature = <95000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert2: cpu-alert-2 {
+				temperature = <110000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_crit0: cpu-crit-0 {
+				temperature = <120000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+		cooling-maps {
+			map0 {
+				trip = <&cpu_alert0>;
+			};
+			map1 {
+				trip = <&cpu_alert1>;
+			};
+		};
+	};
+};
+};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 76173cacd450..77ea547768f4 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -38,6 +38,7 @@
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
+		i2c8 = &i2c_8;
 		csis0 = &csis_0;
 		csis1 = &csis_1;
 		fimc0 = &fimc_0;
@@ -104,6 +105,7 @@
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C20 0x20>;
 		#power-domain-cells = <0>;
+		power-domains = <&pd_lcd0>;
 	};
 
 	pd_cam: cam-power-domain@10023C00 {
@@ -554,6 +556,22 @@
 		status = "disabled";
 	};
 
+	i2c_8: i2c@138E0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-hdmiphy-i2c";
+		reg = <0x138E0000 0x100>;
+		interrupts = <0 93 0>;
+		clocks = <&clock CLK_I2C_HDMI>;
+		clock-names = "i2c";
+		status = "disabled";
+
+		hdmi_i2c_phy: hdmiphy@38 {
+			compatible = "exynos4210-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
 	spi_0: spi@13920000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
@@ -663,6 +681,33 @@
 		status = "disabled";
 	};
 
+	tmu: tmu@100C0000 {
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	hdmi: hdmi@12D00000 {
+		compatible = "samsung,exynos4210-hdmi";
+		reg = <0x12D00000 0x70000>;
+		interrupts = <0 92 0>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
+			"mout_hdmi";
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			<&clock CLK_MOUT_HDMI>;
+		phy = <&hdmi_i2c_phy>;
+		power-domains = <&pd_tv>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+	};
+
+	mixer: mixer@12C10000 {
+		compatible = "samsung,exynos4210-mixer";
+		interrupts = <0 91 0>;
+		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+		power-domains = <&pd_tv>;
+		status = "disabled";
+	};
+
 	ppmu_dmc0: ppmu_dmc0@106a0000 {
 		compatible = "samsung,exynos-ppmu";
 		reg = <0x106a0000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 3d6652a4b6cb..32c5fd8f6269 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -426,6 +426,25 @@
 		status = "okay";
 	};
 
+	tmu@100C0000 {
+		status = "okay";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 2 2>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 4 4>;
+			       };
+		       };
+		};
+	};
+
 	camera {
 		pinctrl-names = "default";
 		pinctrl-0 = <>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index b57e6b82ea20..d4f2b11319dd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -505,6 +505,63 @@
 			assigned-clock-rates = <0>, <160000000>;
 		};
 	};
+
+	hdmi_en: voltage-regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpe0 1 0>;
+		enable-active-high;
+	};
+
+	hdmi_ddc: i2c-ddc {
+		compatible = "i2c-gpio";
+		gpios = <&gpe4 2 0 &gpe4 3 0>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_ddc_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	mixer@12C10000 {
+		status = "okay";
+	};
+
+	hdmi@12D00000 {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd>;
+		hdmi-en-supply = <&hdmi_en>;
+		vdd-supply = <&ldo3_reg>;
+		vdd_osc-supply = <&ldo4_reg>;
+		vdd_pll-supply = <&ldo3_reg>;
+		ddc = <&hdmi_ddc>;
+		status = "okay";
+	};
+
+	i2c@138E0000 {
+		status = "okay";
+	};
+};
+
+&pinctrl_1 {
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <0>;
+	};
+};
+
+&pinctrl_0 {
+	i2c_ddc_bus: i2c-ddc-bus {
+		samsung,pins = "gpe4-2", "gpe4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 67c832c9dcf1..be89f83f70e7 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -21,6 +21,7 @@
 
 #include "exynos4.dtsi"
 #include "exynos4210-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 
 / {
 	compatible = "samsung,exynos4210", "samsung,exynos4";
@@ -35,10 +36,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@900 {
+		cpu0: cpu@900 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x900>;
+			cooling-min-level = <4>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@901 {
@@ -153,16 +157,38 @@
 		reg = <0x03860000 0x1000>;
 	};
 
-	tmu@100C0000 {
+	tmu: tmu@100C0000 {
 		compatible = "samsung,exynos4210-tmu";
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
 		clocks = <&clock CLK_TMU_APBIF>;
 		clock-names = "tmu_apbif";
+		samsung,tmu_gain = <15>;
+		samsung,tmu_reference_voltage = <7>;
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+			      cpu_alert0: cpu-alert-0 {
+				      temperature = <85000>; /* millicelsius */
+			      };
+			      cpu_alert1: cpu-alert-1 {
+				      temperature = <100000>; /* millicelsius */
+			      };
+			      cpu_alert2: cpu-alert-2 {
+				      temperature = <110000>; /* millicelsius */
+			      };
+			};
+		};
+	};
+
 	g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
@@ -203,6 +229,14 @@
 		};
 	};
 
+	mixer: mixer@12C10000 {
+		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
+			"sclk_mixer";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
+			<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
+	};
+
 	ppmu_lcd1: ppmu_lcd1@12240000 {
 		compatible = "samsung,exynos-ppmu";
 		reg = <0x12240000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index dd0a43ec56da..5be03288f1ee 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -26,10 +26,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@A00 {
+		cpu0: cpu@A00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			cooling-min-level = <13>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@A01 {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index de80b5bba204..adb4f6a97a1d 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -249,6 +249,20 @@
 					regulator-always-on;
 				};
 
+				ldo8_reg: ldo@8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VDD10_HDMI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo10_reg: ldo@10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VDDQ_MIPIHSI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
 				ldo11_reg: LDO11 {
 					regulator-name = "VDD18_ABB1_1.8V";
 					regulator-min-microvolt = <1800000>;
@@ -411,6 +425,51 @@
 	ehci: ehci@12580000 {
 		status = "okay";
 	};
+
+	tmu@100C0000 {
+		vtmu-supply = <&ldo10_reg>;
+		status = "okay";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
+
+	mixer: mixer@12C10000 {
+		status = "okay";
+	};
+
+	hdmi@12D00000 {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd>;
+		vdd-supply = <&ldo8_reg>;
+		vdd_osc-supply = <&ldo10_reg>;
+		vdd_pll-supply = <&ldo8_reg>;
+		ddc = <&hdmi_ddc>;
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@13880000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+	};
+
+	i2c@138E0000 {
+		status = "okay";
+	};
 };
 
 &pinctrl_1 {
@@ -425,4 +484,9 @@
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..e3f7934d19d0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos4412 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <55>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <100>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 21f748083586..173ffa479ad3 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -927,6 +927,21 @@
 		pulldown-ohm = <100000>; /* 100K */
 		io-channels = <&adc 2>;  /* Battery temperature */
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
 };
 
 &pmu_system_controller {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 0f6ec93bb1d8..68ad43b391ae 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -26,10 +26,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@A00 {
+		cpu0: cpu@A00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			cooling-min-level = <13>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@A01 {
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index f5e0ae780d6c..6a6abe14fd9b 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -19,6 +19,7 @@
 
 #include "exynos4.dtsi"
 #include "exynos4x12-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 
 / {
 	aliases {
@@ -297,4 +298,15 @@
 		clock-names = "tmu_apbif";
 		status = "disabled";
 	};
+
+	hdmi: hdmi@12D00000 {
+		compatible = "samsung,exynos4212-hdmi";
+	};
+
+	mixer: mixer@12C10000 {
+		compatible = "samsung,exynos4212-mixer";
+		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 9bb1b0b738f5..adbde1adad95 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -20,7 +20,7 @@
 #include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
 #include "exynos5250-pinctrl.dtsi"
-
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
@@ -58,11 +58,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1700000000>;
+			cooling-min-level = <15>;
+			cooling-max-level = <9>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -102,6 +105,12 @@
 		#power-domain-cells = <0>;
 	};
 
+	pd_disp1: disp1-power-domain@100440A0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440A0 0x20>;
+		#power-domain-cells = <0>;
+	};
+
 	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
@@ -235,12 +244,32 @@
 		status = "disabled";
 	};
 
-	tmu@10060000 {
+	tmu: tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
+
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 9 9>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 15 15>;
+			       };
+		       };
+		};
 	};
 
 	serial@12C00000 {
@@ -719,6 +748,7 @@
 	hdmi: hdmi {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
+		power-domains = <&pd_disp1>;
 		interrupts = <0 95 0>;
 		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
 			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
@@ -731,9 +761,11 @@
 	mixer {
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
+		power-domains = <&pd_disp1>;
 		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			 <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "hdmi", "sclk_hdmi";
 	};
 
 	dp_phy: video-phy@10040720 {
@@ -743,6 +775,7 @@
 	};
 
 	dp: dp-controller@145B0000 {
+		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_DP>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
@@ -750,6 +783,7 @@
 	};
 
 	fimd: fimd@14400000 {
+		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
new file mode 100644
index 000000000000..5d31fc140823
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Device tree sources for default Exynos5420 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+	cpu-alert-0 {
+		temperature = <85000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-1 {
+		temperature = <103000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-2 {
+		temperature = <110000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-crit-0 {
+		temperature = <1200000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 9dc2e9773b30..c0e98cf3514f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -740,8 +740,9 @@
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			 <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "hdmi", "sclk_hdmi";
 		power-domains = <&disp_pd>;
 	};
 
@@ -782,6 +783,7 @@
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu1: tmu@10064000 {
@@ -790,6 +792,7 @@
 		interrupts = <0 183 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu2: tmu@10068000 {
@@ -798,6 +801,7 @@
 		interrupts = <0 184 0>;
 		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu3: tmu@1006c000 {
@@ -806,6 +810,7 @@
 		interrupts = <0 185 0>;
 		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_gpu: tmu@100a0000 {
@@ -814,6 +819,30 @@
 		interrupts = <0 215 0>;
 		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		gpu_thermal: gpu-thermal {
+		       thermal-sensors = <&tmu_gpu>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
 	};
 
         watchdog: watchdog@101D0000 {
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..7b2fba0ae92b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos5440 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <5>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <0x5d2d>;
+samsung,tmu_min_efuse_value = <16>;
+samsung,tmu_max_efuse_value = <76>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <70>;
+samsung,tmu_default_temp_offset = <25>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
new file mode 100644
index 000000000000..48adfa8f4300
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device tree sources for default Exynos5440 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+	cpu-alert-0 {
+		temperature = <100000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "active";
+	};
+	cpu-crit-0 {
+		temperature = <1050000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 8f3373cd7b87..59d9416b3b03 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -219,6 +219,7 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 	tmuctrl_1: tmuctrl@16011C {
@@ -227,6 +228,7 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 	tmuctrl_2: tmuctrl@160120 {
@@ -235,6 +237,22 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmuctrl_0>;
+			#include "exynos5440-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmuctrl_1>;
+		       #include "exynos5440-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmuctrl_2>;
+		       #include "exynos5440-trip-points.dtsi"
+		};
 	};
 
 	sata@210000 {
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f1cd2147421d..a626e6dd8022 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -35,6 +35,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -45,6 +46,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 29 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_audio: regulator@2 {
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index fda4932faefd..945887d3fdb3 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -52,6 +52,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 0 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_otg2_vbus: regulator@1 {
@@ -62,6 +63,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 2 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_aud3v: regulator@2 {
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 0ab748cf7749..f5b5a1d96cd7 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -133,6 +133,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 46eadb21b5ef..2294f5b0aa10 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -73,6 +73,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 127f3e7c10c4..346552b94d9f 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -106,6 +106,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &twl_gpio {
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index cc8bd0cd8cf8..72f7cdc091fb 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -42,4 +42,13 @@
 	vmmc-supply = <&lbep5clwmc_wlen>;
 	bus-width = <4>;
 	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */
+	};
 };
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 9326b282c94a..b899e341874a 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -64,4 +64,13 @@
 	vmmc-supply = <&lbep5clwmc_wlen>;
 	bus-width = <4>;
 	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+	};
 };
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 6644f516a42b..131448d86e67 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -195,6 +195,16 @@
 	cap-power-off-card;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */
+		ref-clock-frequency = <26000000>;
+	};
 };
 
 &uart1 {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 150513506c19..1228de5a05ed 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -450,6 +450,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3e1da43068f6..8c36f51f5780 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -487,6 +487,17 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1281";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index cc66af419236..9bceeb7e1f03 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -65,4 +65,14 @@
 	bus-width = <4>;
 	cap-power-off-card;
 	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
+		ref-clock-frequency = <38400000>;
+	};
 };
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
index 19212ac6eef0..de8a3d456cf7 100644
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi
@@ -13,7 +13,7 @@
 
 core_thermal: core_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
 
 			/* sensor       ID */
 	thermal-sensors = <&bandgap     2>;
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
index 1b87aca88b77..bc3090f2e84b 100644
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -13,7 +13,7 @@
 
 gpu_thermal: gpu_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
 
 			/* sensor       ID */
 	thermal-sensors = <&bandgap     1>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index ddff674bd05e..4a485b63a141 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -1079,4 +1079,8 @@
 	};
 };
 
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
+};
+
 /include/ "omap54xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 58c27466f012..83b425fb3ac2 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -167,10 +167,18 @@
 		ti,index-starts-at-one;
 	};
 
+	dpll_core_byp_mux: dpll_core_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
 	dpll_core_ck: dpll_core_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
@@ -294,10 +302,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_iva_byp_mux: dpll_iva_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
 	dpll_iva_ck: dpll_iva_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
@@ -599,10 +615,19 @@
 	};
 };
 &cm_core_clocks {
+
+	dpll_per_byp_mux: dpll_per_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
 	dpll_per_ck: dpll_per_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
@@ -714,10 +739,18 @@
 		ti,index-starts-at-one;
 	};
 
+	dpll_usb_byp_mux: dpll_usb_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
 	dpll_usb_ck: dpll_usb_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 7de02f104004..24e488826d34 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1449,7 +1449,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 5cccbc98b267..82786027e814 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -264,7 +264,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
@@ -509,8 +509,8 @@
 
 					lcdck: lcdck {
 						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&smd>;
+						reg = <3>;
+						clocks = <&mck>;
 					};
 
 					smdck: smdck {
@@ -818,7 +818,7 @@
 						reg = <50>;
 					};
 
-					lcd_clk: lcd_clk {
+					lcdc_clk: lcdc_clk {
 						#clock-cells = <0>;
 						reg = <51>;
 					};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 252c3d1bda50..9d8760956752 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -713,6 +713,9 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 28>,
+			       <&pdma 29>;
+			dma-names = "tx", "rx";
 		};
 
 		uart1: serial1@ffc03000 {
@@ -722,6 +725,9 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 30>,
+			       <&pdma 31>;
+			dma-names = "tx", "rx";
 		};
 
 		rst: rstmgr@ffd05000 {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b7e6b6fba5e0..06075b6d2463 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCI_RCAR_GEN2_PCIE=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=16
 CONFIG_HIGHPTE=y
 CONFIG_CMA=y
 CONFIG_ARM_APPENDED_DTB=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a097cffa1231..8e108599e1af 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m
 CONFIG_PWM_TWL_LED=m
 CONFIG_OMAP_USB2=m
 CONFIG_TI_PIPE3=y
+CONFIG_TWL4030_USB=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 38840a812924..8f6a5702b696 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=8
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index f489fdaa19b8..37fe607a4ede 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
-CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_ISP1760=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 37ca2a4c6f09..bf0fe99e8ca9 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -207,7 +207,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
 
 	bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
 
-	VM_BUG_ON(size & PAGE_MASK);
+	VM_BUG_ON(size & ~PAGE_MASK);
 
 	if (!need_flush && !icache_is_pipt())
 		goto vipt_cache;
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index 80a6501b4d50..c3c45e628e33 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -18,8 +18,11 @@
 #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
 #endif
 
-/* Keep in sync with mach-at91/include/mach/hardware.h */
+#ifdef CONFIG_MMU
 #define AT91_IO_P2V(x) ((x) - 0x01000000)
+#else
+#define AT91_IO_P2V(x) (x)
+#endif
 
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 07e7eb1d7ab6..5560f74f9eee 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -540,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
 		kvm_guest_exit();
-		trace_kvm_exit(*vcpu_pc(vcpu));
+		trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
 		/*
 		 * We may have taken a host interrupt in HYP mode (ie
 		 * while executing the guest). This interrupt is still
diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h
index 881874b1a036..6817664b46b8 100644
--- a/arch/arm/kvm/trace.h
+++ b/arch/arm/kvm/trace.h
@@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry,
 );
 
 TRACE_EVENT(kvm_exit,
-	TP_PROTO(unsigned long vcpu_pc),
-	TP_ARGS(vcpu_pc),
+	TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
+	TP_ARGS(exit_reason, vcpu_pc),
 
 	TP_STRUCT__entry(
+		__field(	unsigned int,	exit_reason	)
 		__field(	unsigned long,	vcpu_pc		)
 	),
 
 	TP_fast_assign(
+		__entry->exit_reason		= exit_reason;
 		__entry->vcpu_pc		= vcpu_pc;
 	),
 
-	TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
+	TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
+		  __entry->exit_reason,
+		  __entry->vcpu_pc)
 );
 
 TRACE_EVENT(kvm_guest_fault,
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index a2cc49f96f61..931f0e302c03 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -70,6 +70,8 @@ tmp2	.req	r5
 
 	.text
 
+	.arm
+
 /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
  *			void __iomem *ramc1, int memctrl)
  */
@@ -205,6 +207,7 @@ sdr_sr_done:
 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Wait for interrupt */
@@ -213,6 +216,7 @@ sdr_sr_done:
 	/* Turn on the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	wait_moscrdy
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index cd30f6f5f2ff..dd8f5312b2c0 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -200,17 +200,6 @@ config DA850_UI_SD_VIDEO_PORT
 
 endchoice
 
-config DA850_WL12XX
-	bool "AM18x wl1271 daughter board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The wl1271 daughter card for AM18x EVMs is a combo wireless
-	  connectivity add-on card, based on the LS Research TiWi module with
-	  Texas Instruments' wl1271 solution.
-	  Say Y if you want to use a wl1271 expansion card connected to the
-	  AM18x EVM.
-
-
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6b5a97da9fe3..1ed545cc2b83 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -38,7 +38,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#include <linux/wl12xx.h>
 
 #include <mach/common.h>
 #include <mach/cp_intc.h>
@@ -60,9 +59,6 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
-#define DA850_WLAN_EN			GPIO_TO_PIN(6, 9)
-#define DA850_WLAN_IRQ			GPIO_TO_PIN(6, 10)
-
 #define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
 
 static struct mtd_partition da850evm_spiflash_part[] = {
@@ -1343,109 +1339,6 @@ static __init void da850_vpif_init(void)
 static __init void da850_vpif_init(void) {}
 #endif
 
-#ifdef CONFIG_DA850_WL12XX
-
-static void wl12xx_set_power(int index, bool power_on)
-{
-	static bool power_state;
-
-	pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
-
-	if (power_on == power_state)
-		return;
-	power_state = power_on;
-
-	if (power_on) {
-		/* Power up sequence required for wl127x devices */
-		gpio_set_value(DA850_WLAN_EN, 1);
-		usleep_range(15000, 15000);
-		gpio_set_value(DA850_WLAN_EN, 0);
-		usleep_range(1000, 1000);
-		gpio_set_value(DA850_WLAN_EN, 1);
-		msleep(70);
-	} else {
-		gpio_set_value(DA850_WLAN_EN, 0);
-	}
-}
-
-static struct davinci_mmc_config da850_wl12xx_mmc_config = {
-	.set_power	= wl12xx_set_power,
-	.wires		= 4,
-	.max_freq	= 25000000,
-	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
-			  MMC_CAP_POWER_OFF_CARD,
-};
-
-static const short da850_wl12xx_pins[] __initconst = {
-	DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
-	DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
-	DA850_GPIO6_9, DA850_GPIO6_10,
-	-1
-};
-
-static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
-	.irq			= -1,
-	.board_ref_clock	= WL12XX_REFCLOCK_38,
-	.platform_quirks	= WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
-};
-
-static __init int da850_wl12xx_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da850_wl12xx_pins);
-	if (ret) {
-		pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
-		goto exit;
-	}
-
-	ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
-	if (ret) {
-		pr_err("wl12xx/mmc registration failed: %d\n", ret);
-		goto exit;
-	}
-
-	ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
-	if (ret) {
-		pr_err("Could not request wl12xx enable gpio: %d\n", ret);
-		goto exit;
-	}
-
-	ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
-	if (ret) {
-		pr_err("Could not request wl12xx irq gpio: %d\n", ret);
-		goto free_wlan_en;
-	}
-
-	da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
-
-	ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
-	if (ret) {
-		pr_err("Could not set wl12xx data: %d\n", ret);
-		goto free_wlan_irq;
-	}
-
-	return 0;
-
-free_wlan_irq:
-	gpio_free(DA850_WLAN_IRQ);
-
-free_wlan_en:
-	gpio_free(DA850_WLAN_EN);
-
-exit:
-	return ret;
-}
-
-#else /* CONFIG_DA850_WL12XX */
-
-static __init int da850_wl12xx_init(void)
-{
-	return 0;
-}
-
-#endif /* CONFIG_DA850_WL12XX */
-
 #define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
 
 static __init void da850_evm_init(void)
@@ -1502,11 +1395,6 @@ static __init void da850_evm_init(void)
 		if (ret)
 			pr_warn("%s: MMCSD0 registration failed: %d\n",
 				__func__, ret);
-
-		ret = da850_wl12xx_init();
-		if (ret)
-			pr_warn("%s: WL12xx initialization failed: %d\n",
-				__func__, ret);
 	}
 
 	davinci_serial_init(da8xx_serial_device);
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 3f32c47a6d74..d2e9f12d12f1 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
  */
 void exynos_cpu_power_down(int cpu)
 {
-	if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
-		of_machine_is_compatible("samsung,exynos5800"))) {
+	if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
 		/*
 		 * Bypass power down for CPU0 during suspend. Check for
 		 * the SYS_PWR_REG value to decide if we are suspending
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 20f267121b3e..37266a826437 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -161,6 +161,34 @@ no_clk:
 		of_genpd_add_provider_simple(np, &pd->pd);
 	}
 
+	/* Assign the child power domains to their parents */
+	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
+		struct generic_pm_domain *child_domain, *parent_domain;
+		struct of_phandle_args args;
+
+		args.np = np;
+		args.args_count = 0;
+		child_domain = of_genpd_get_from_provider(&args);
+		if (!child_domain)
+			continue;
+
+		if (of_parse_phandle_with_args(np, "power-domains",
+					 "#power-domain-cells", 0, &args) != 0)
+			continue;
+
+		parent_domain = of_genpd_get_from_provider(&args);
+		if (!parent_domain)
+			continue;
+
+		if (pm_genpd_add_subdomain(parent_domain, child_domain))
+			pr_warn("%s failed to add subdomain: %s\n",
+				parent_domain->name, child_domain->name);
+		else
+			pr_info("%s has as child subdomain: %s.\n",
+				parent_domain->name, child_domain->name);
+		of_node_put(np);
+	}
+
 	return 0;
 }
 arch_initcall(exynos4_pm_init_power_domain);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 52e2b1a2fddb..318d127df147 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
 static u32 exynos_irqwake_intmask = 0xffffffff;
 
 static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
-	{ 73, BIT(1) }, /* RTC alarm */
-	{ 74, BIT(2) }, /* RTC tick */
+	{ 105, BIT(1) }, /* RTC alarm */
+	{ 106, BIT(2) }, /* RTC tick */
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4ad6e473cf83..9de3412af406 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void)
 	 * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
 	 * (external OSC), and we need to clear the bit.
 	 */
-	clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
-				       IMX6Q_GPR1_ENET_CLK_SEL_PAD;
+	clksel = clk_is_match(ptp_clk, enet_ref) ?
+				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+				IMX6Q_GPR1_ENET_CLK_SEL_PAD;
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
 		regmap_update_bits(gpr, IOMUXC_GPR1,
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 61bfe584a9d7..fc832040c6e9 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -20,6 +20,7 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,15 +47,20 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= MSM_GPIO_TO_INT(49),
 		.end	= MSM_GPIO_TO_INT(49),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 4c748616ef47..10016a3bc698 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -22,6 +22,7 @@
 #include <linux/usb/msm_hsusb.h>
 #include <linux/err.h>
 #include <linux/clkdev.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -49,15 +50,20 @@ static struct resource smc91x_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.flags = IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name           = "smc91x",
 	.id             = 0,
 	.num_resources  = ARRAY_SIZE(smc91x_resources),
 	.resource       = smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static int __init msm_init_smc91x(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 92afb723dcfc..355b08936871 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 	if (ret == -EBUSY)
 		pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
-	if (!ret) {
+	if (oh->clkdm) {
 		/*
 		 * Set the clockdomain to HW_AUTO, assuming that the
 		 * previous state was HW_AUTO.
 		 */
-		if (oh->clkdm && hwsup)
+		if (hwsup)
 			clkdm_allow_idle(oh->clkdm);
-	} else {
-		if (oh->clkdm)
-			clkdm_hwmod_disable(oh->clkdm, oh);
+
+		clkdm_hwmod_disable(oh->clkdm, oh);
 	}
 
 	return ret;
@@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh)
 	INIT_LIST_HEAD(&oh->master_ports);
 	INIT_LIST_HEAD(&oh->slave_ports);
 	spin_lock_init(&oh->_lock);
+	lockdep_set_class(&oh->_lock, &oh->hwmod_key);
 
 	oh->_state = _HWMOD_STATE_REGISTERED;
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 9d4bec6ee742..9611c91d9b82 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -674,6 +674,7 @@ struct omap_hwmod {
 	u32				_sysc_cache;
 	void __iomem			*_mpu_rt_va;
 	spinlock_t			_lock;
+	struct lock_class_key		hwmod_key; /* unique lock class */
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
 	unsigned int			(*xlate_irq)(unsigned int);
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index e8692e7675b8..16fe7a1b7a35 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1466,55 +1466,18 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
  *
  */
 
-static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
+static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
 	.name	= "pcie",
 };
 
 /* pcie1 */
-static struct omap_hwmod dra7xx_pcie1_hwmod = {
+static struct omap_hwmod dra7xx_pciess1_hwmod = {
 	.name		= "pcie1",
-	.class		= &dra7xx_pcie_hwmod_class,
+	.class		= &dra7xx_pciess_hwmod_class,
 	.clkdm_name	= "pcie_clkdm",
 	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
-			.clkctrl_offs	= DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pcie2 */
-static struct omap_hwmod dra7xx_pcie2_hwmod = {
-	.name		= "pcie2",
-	.class		= &dra7xx_pcie_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'PCIE PHY' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = {
-	.name	= "pcie-phy",
-};
-
-/* pcie1 phy */
-static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
-	.name		= "pcie1-phy",
-	.class		= &dra7xx_pcie_phy_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
 			.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
 			.modulemode   = MODULEMODE_SWCTRL,
@@ -1522,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
 	},
 };
 
-/* pcie2 phy */
-static struct omap_hwmod dra7xx_pcie2_phy_hwmod = {
-	.name		= "pcie2-phy",
-	.class		= &dra7xx_pcie_phy_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
+/* pcie2 */
+static struct omap_hwmod dra7xx_pciess2_hwmod = {
+	.name		= "pcie2",
+	.class		= &dra7xx_pciess_hwmod_class,
+	.clkdm_name	= "pcie_clkdm",
 	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
@@ -2877,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> pcie1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = {
+/* l3_main_1 -> pciess1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pcie1_hwmod,
+	.slave		= &dra7xx_pciess1_hwmod,
 	.clk		= "l3_iclk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> pcie1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
+/* l4_cfg -> pciess1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie1_hwmod,
+	.slave		= &dra7xx_pciess1_hwmod,
 	.clk		= "l4_root_clk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> pcie2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = {
+/* l3_main_1 -> pciess2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pcie2_hwmod,
+	.slave		= &dra7xx_pciess2_hwmod,
 	.clk		= "l3_iclk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> pcie2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pcie1 phy */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie1_phy_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pcie2 phy */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = {
+/* l4_cfg -> pciess2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie2_phy_hwmod,
+	.slave		= &dra7xx_pciess2_hwmod,
 	.clk		= "l4_root_clk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -3327,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_cfg__mpu,
 	&dra7xx_l4_cfg__ocp2scp1,
 	&dra7xx_l4_cfg__ocp2scp3,
-	&dra7xx_l3_main_1__pcie1,
-	&dra7xx_l4_cfg__pcie1,
-	&dra7xx_l3_main_1__pcie2,
-	&dra7xx_l4_cfg__pcie2,
-	&dra7xx_l4_cfg__pcie1_phy,
-	&dra7xx_l4_cfg__pcie2_phy,
+	&dra7xx_l3_main_1__pciess1,
+	&dra7xx_l4_cfg__pciess1,
+	&dra7xx_l3_main_1__pciess2,
+	&dra7xx_l4_cfg__pciess2,
 	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_per3__rtcss,
 	&dra7xx_l4_cfg__sata,
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 190fa43e7479..af11511dda50 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/ti_wilink_st.h>
-#include <linux/wl12xx.h>
 
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
@@ -35,34 +34,6 @@ struct pdata_init {
 struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
-#if IS_ENABLED(CONFIG_WL12XX)
-
-static struct wl12xx_platform_data wl12xx __initdata;
-
-static void __init __used legacy_init_wl12xx(unsigned ref_clock,
-					     unsigned tcxo_clock,
-					     int gpio)
-{
-	int res;
-
-	wl12xx.board_ref_clock = ref_clock;
-	wl12xx.board_tcxo_clock = tcxo_clock;
-	wl12xx.irq = gpio_to_irq(gpio);
-
-	res = wl12xx_set_platform_data(&wl12xx);
-	if (res) {
-		pr_err("error setting wl12xx data: %d\n", res);
-		return;
-	}
-}
-#else
-static inline void legacy_init_wl12xx(unsigned ref_clock,
-				      unsigned tcxo_clock,
-				      int gpio)
-{
-}
-#endif
-
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -129,7 +100,6 @@ static void __init omap3_sbc_t3730_twl_init(void)
 static void __init omap3_sbc_t3730_legacy_init(void)
 {
 	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
 }
 
 static void __init omap3_sbc_t3530_legacy_init(void)
@@ -159,26 +129,19 @@ static struct platform_device btwilink_device = {
 
 static void __init omap3_igep0020_rev_f_legacy_init(void)
 {
-	legacy_init_wl12xx(0, 0, 177);
 	platform_device_register(&wl18xx_device);
 	platform_device_register(&btwilink_device);
 }
 
 static void __init omap3_igep0030_rev_g_legacy_init(void)
 {
-	legacy_init_wl12xx(0, 0, 136);
 	platform_device_register(&wl18xx_device);
 	platform_device_register(&btwilink_device);
 }
 
 static void __init omap3_evm_legacy_init(void)
 {
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
-}
-
-static void __init omap3_zoom_legacy_init(void)
-{
-	legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
+	hsmmc2_internal_input_clk();
 }
 
 static void am35xx_enable_emac_int(void)
@@ -245,7 +208,6 @@ static void __init omap3_sbc_t3517_legacy_init(void)
 	am35xx_emac_reset();
 	hsmmc2_internal_input_clk();
 	omap3_sbc_t3517_wifi_init();
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
 }
 
 static void __init am3517_evm_legacy_init(void)
@@ -287,24 +249,6 @@ static void __init omap3_tao3530_legacy_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#ifdef CONFIG_ARCH_OMAP4
-static void __init omap4_sdp_legacy_init(void)
-{
-	legacy_init_wl12xx(WL12XX_REFCLOCK_26,
-			   WL12XX_TCXOCLOCK_26, 53);
-}
-
-static void __init omap4_panda_legacy_init(void)
-{
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
-}
-
-static void __init var_som_om44_legacy_init(void)
-{
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41);
-}
-#endif
-
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 static struct iommu_platform_data omap4_iommu_pdata = {
 	.reset_name = "mmu_cache",
@@ -313,13 +257,6 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 };
 #endif
 
-#ifdef CONFIG_SOC_AM33XX
-static void __init am335x_evmsk_legacy_init(void)
-{
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
-}
-#endif
-
 #ifdef CONFIG_SOC_OMAP5
 static void __init omap5_uevm_legacy_init(void)
 {
@@ -420,19 +357,9 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
 	{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
-	{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },
 	{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
 #endif
-#ifdef CONFIG_ARCH_OMAP4
-	{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
-	{ "ti,omap4-panda", omap4_panda_legacy_init, },
-	{ "variscite,var-dvk-om44", var_som_om44_legacy_init, },
-	{ "variscite,var-stk-om44", var_som_om44_legacy_init, },
-#endif
-#ifdef CONFIG_SOC_AM33XX
-	{ "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
-#endif
 #ifdef CONFIG_SOC_OMAP5
 	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
 #endif
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a08a617a6c11..d6d6bc39e05c 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] =
 		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+					OMAP4_PRM_IRQENABLE_MPU_OFFSET);
 	saved_mask[1] =
 		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+					OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 
 	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 343c4e3a7c5d..f6d02e4cbcda 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -36,6 +36,7 @@
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/bitfield.h>
 #include <linux/platform_data/mmc-pxamci.h>
+#include <linux/smc91x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -81,11 +82,16 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static void idp_backlight_power(int on)
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index ad777b353bd5..eaee2c20b189 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -189,15 +190,20 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= LPD270_ETHERNET_IRQ,
 		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
+struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static struct resource lpd270_flash_resources[] = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 850e506926df..c309593abdb2 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -28,6 +28,7 @@
 #include <linux/platform_data/video-clcd-versatile.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/smc91x.h>
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
@@ -94,6 +95,10 @@ static struct smsc911x_platform_config smsc911x_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device realview_eth_device = {
 	.name		= "smsc911x",
 	.id		= 0,
@@ -107,6 +112,8 @@ int realview_eth_register(const char *name, struct resource *res)
 	realview_eth_device.resource = res;
 	if (strcmp(realview_eth_device.name, "smsc911x") == 0)
 		realview_eth_device.dev.platform_data = &smsc911x_config;
+	else
+		realview_eth_device.dev.platform_data = &smc91x_platdata;
 
 	return platform_device_register(&realview_eth_device);
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 64c88d657f9e..b3869cbbcc68 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -234,7 +234,7 @@ static struct resource realview_eb_eth_resources[] = {
 	[1] = {
 		.start		= IRQ_EB_ETH,
 		.end		= IRQ_EB_ETH,
-		.flags		= IORESOURCE_IRQ,
+		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 169262e3040d..af868d258e66 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -12,6 +12,7 @@
 #include <linux/pm.h>
 #include <linux/serial_core.h>
 #include <linux/slab.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -258,12 +259,17 @@ static int neponset_probe(struct platform_device *dev)
 			0x02000000, "smc91x-attrib"),
 		{ .flags = IORESOURCE_IRQ },
 	};
+	struct smc91x_platdata smc91x_platdata = {
+		.flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT,
+	};
 	struct platform_device_info smc91x_devinfo = {
 		.parent = &dev->dev,
 		.name = "smc91x",
 		.id = 0,
 		.res = smc91x_resources,
 		.num_res = ARRAY_SIZE(smc91x_resources),
+		.data = &smc91x_platdata,
+		.size_data = sizeof(smc91x_platdata),
 	};
 	int ret, irq;
 
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 091261878eff..1525d7b5f1b7 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -43,12 +44,18 @@ static struct resource smc91x_resources[] = {
 #endif
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
 
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev = {
+		.platform_data  = &smc91x_platdata,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 483cb467bf65..a0f3b1cd497c 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end;
 
 extern unsigned long socfpga_cpu1start_addr;
 
-#define SOCFPGA_SCU_VIRT_BASE   0xfffec000
+#define SOCFPGA_SCU_VIRT_BASE   0xfee00000
 
 #endif
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 383d61e138af..f5e597c207b9 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -23,6 +23,7 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/cacheflush.h>
 
 #include "core.h"
 
@@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void)
 			(u32 *) &socfpga_cpu1start_addr))
 		pr_err("SMP: Need cpu1-start-addr in device tree.\n");
 
+	/* Ensure that socfpga_cpu1start_addr is visible to other CPUs */
+	smp_wmb();
+	sync_cache_w(&socfpga_cpu1start_addr);
+
 	sys_manager_base_addr = of_iomap(np, 0);
 
 	np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index b067390cef4e..b373acade338 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = {
 	"st,stih415",
 	"st,stih416",
 	"st,stih407",
+	"st,stih410",
 	"st,stih418",
 	NULL
 };