CRIS: Drop support for the CRIS port

The port was added back in 2000 so it's no longer even a good source
of inspiration for newer ports (if it ever was)

The last SoC (ARTPEC-3) with a CRIS main CPU was launched in 2008.

Coupled with time and working developer board hardware being
in low supply, it's time to drop the port from Linux.

So long and thanks for all the fish!

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 111 deletions

diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig
deleted file mode 100644
index 7b63755544dd..000000000000
--- a/arch/cris/arch-v32/mach-a3/Kconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if CRIS_MACH_ARTPEC3
-
-menu "Artpec-3 options"
-       depends on CRIS_MACH_ARTPEC3
-
-config ETRAX_DRAM_VIRTUAL_BASE
-	hex
-	default "c0000000"
-
-config ETRAX_L2CACHE
-       bool
-       default y
-
-config ETRAX_SERIAL_PORTS
-       int
-       default 5
-
-config ETRAX_DDR2_MRS
-	hex "DDR2 MRS"
-	default "0"
-
-config ETRAX_DDR2_TIMING
-	hex "DDR2 SDRAM timing"
-	default "0"
-	help
-	  SDRAM timing parameters.
-
-config ETRAX_DDR2_CONFIG
-	hex "DDR2 config"
-	default "0"
-
-config ETRAX_DDR2_LATENCY
-	hex "DDR2 latency"
-	default "0"
-
-config ETRAX_PIO_CE0_CFG
-       hex "PIO CE0 configuration"
-       default "0"
-
-config ETRAX_PIO_CE1_CFG
-       hex "PIO CE1 configuration"
-       default "0"
-
-config ETRAX_PIO_CE2_CFG
-       hex "PIO CE2 configuration"
-       default "0"
-
-config ETRAX_DEF_GIO_PA_OE
-	hex "GIO_PA_OE"
-	default "00000000"
-	help
-	  Configures the direction of general port A bits.  1 is out, 0 is in.
-	  This is often totally different depending on the product used.
-	  There are some guidelines though - if you know that only LED's are
-	  connected to port PA, then they are usually connected to bits 2-4
-	  and you can therefore use 1c.  On other boards which don't have the
-	  LED's at the general ports, these bits are used for all kinds of
-	  stuff.  If you don't know what to use, it is always safe to put all
-	  as inputs, although floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PA_OUT
-	hex "GIO_PA_OUT"
-	default "00000000"
-	help
-	  Configures the initial data for the general port A bits.  Most
-	  products should use 00 here.
-
-config ETRAX_DEF_GIO_PB_OE
-	hex "GIO_PB_OE"
-	default "000000000"
-	help
-	  Configures the direction of general port B bits.  1 is out, 0 is in.
-	  This is often totally different depending on the product used.
-	  There are some guidelines though - if you know that only LED's are
-	  connected to port PA, then they are usually connected to bits 2-4
-	  and you can therefore use 1c.  On other boards which don't have the
-	  LED's at the general ports, these bits are used for all kinds of
-	  stuff.  If you don't know what to use, it is always safe to put all
-	  as inputs, although floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PB_OUT
-	hex "GIO_PB_OUT"
-	default "000000000"
-	help
-	  Configures the initial data for the general port B bits.  Most
-	  products should use 00000 here.
-
-config ETRAX_DEF_GIO_PC_OE
-	hex "GIO_PC_OE"
-	default "00000"
-	help
-	  Configures the direction of general port C bits.  1 is out, 0 is in.
-	  This is often totally different depending on the product used.
-	  There are some guidelines though - if you know that only LED's are
-	  connected to port PA, then they are usually connected to bits 2-4
-	  and you can therefore use 1c.  On other boards which don't have the
-	  LED's at the general ports, these bits are used for all kinds of
-	  stuff.  If you don't know what to use, it is always safe to put all
-	  as inputs, although floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PC_OUT
-	hex "GIO_PC_OUT"
-	default "00000"
-	help
-	  Configures the initial data for the general port C bits.  Most
-	  products should use 00000 here.
-
-endmenu
-
-endif