CRIS: Drop support for the CRIS port

The port was added back in 2000 so it's no longer even a good source
of inspiration for newer ports (if it ever was)

The last SoC (ARTPEC-3) with a CRIS main CPU was launched in 2008.

Coupled with time and working developer board hardware being
in low supply, it's time to drop the port from Linux.

So long and thanks for all the fish!

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 0 insertions, 670 deletions

diff --git a/arch/cris/boot/rescue/Makefile b/arch/cris/boot/rescue/Makefile
deleted file mode 100644
index f73ac4c83b96..000000000000
--- a/arch/cris/boot/rescue/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for rescue (bootstrap) code
-#
-
-# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
-# 				    -I$(srctree)/include/asm/arch
-# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-# LD = gcc-cris -mlinux -march=v32 -nostdlib
-
-ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-arch-$(CONFIG_ETRAX_ARCH_V10) = v10
-arch-$(CONFIG_ETRAX_ARCH_V32) = v32
-
-ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
-obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
-OBJECTS := $(obj-y)
-
-targets := rescue.o rescue.bin
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)
-
-else
-$(obj)/rescue.bin:
-
-endif
-
-$(obj)/testrescue.bin: $(obj)/testrescue.o
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
-# Pad it to 784 bytes
-	dd if=/dev/zero of=tmp2423 bs=1 count=784
-	cat tr.bin tmp2423 >testrescue_tmp.bin
-	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
-	rm tr.bin tmp2423 testrescue_tmp.bin
-
-
-$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
-# Pad it to 784 bytes, that's what the rescue loader expects
-	dd if=/dev/zero of=tmp2423 bs=1 count=784
-	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
-	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
-	rm ktr.bin tmp2423 kimagerescue_tmp.bin
-
diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S
deleted file mode 100644
index 11eedb1bf31a..000000000000
--- a/arch/cris/boot/rescue/head_v10.S
+++ /dev/null
@@ -1,358 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Rescue code, made to reside at the beginning of the
- * flash-memory. when it starts, it checks a partition
- * table at the first sector after the rescue sector.
- * the partition table was generated by the product builder
- * script and contains offsets, lengths, types and checksums
- * for each partition that this code should check.
- *
- * If any of the checksums fail, we assume the flash is so
- * corrupt that we can't use it to boot into the ftp flash
- * loader, and instead we initialize the serial port to
- * receive a flash-loader and new flash image. we dont include
- * any flash code here, but just accept a certain amount of
- * bytes from the serial port and jump into it. the downloaded
- * code is put in the cache.
- *
- * The partitiontable is designed so that it is transparent to
- * code execution - it has a relative branch opcode in the
- * beginning that jumps over it. each entry contains extra
- * data so we can add stuff later.
- *
- * Partition table format:
- *
- *     Code transparency:
- *
- *     2 bytes    [opcode 'nop']
- *     2 bytes    [opcode 'di']
- *     4 bytes    [opcode 'ba <offset>', 8-bit or 16-bit version]
- *     2 bytes    [opcode 'nop', delay slot]
- *
- *     Table validation (at +10):
- *
- *     2 bytes    [magic/version word for partitiontable - 0xef, 0xbe]
- *     2 bytes    [length of all entries plus the end marker]
- *     4 bytes    [checksum for the partitiontable itself]
- *
- *     Entries, each with the following format, last has offset -1:
- *
- *        4 bytes    [offset in bytes, from start of flash]
- *        4 bytes    [length in bytes of partition]
- *        4 bytes    [checksum, simple longword sum]
- *        2 bytes    [partition type]
- *        2 bytes    [flags, only bit 0 used, ro/rw = 1/0]
- *        16 bytes   [reserved for future use]
- *
- *     End marker
- *
- *        4 bytes    [-1]
- *
- *	 10 bytes    [0, padding]
- *
- * Bit 0 in flags signifies RW or RO. The rescue code only bothers
- * to check the checksum for RO partitions, since the others will
- * change their data without updating the checksums. A 1 in bit 0
- * means RO, 0 means RW. That way, it is possible to set a partition
- * in RO mode initially, and later mark it as RW, since you can always
- * write 0's to the flash.
- *
- * During the wait for serial input, the status LED will flash so the
- * user knows something went wrong.
- *
- * Copyright (C) 1999-2007 Axis Communications AB
- */
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-	;; The partitiontable is looked for at the first sector after the boot
-	;; sector. Sector size is 65536 bytes in all flashes we use.
-
-#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
-#define PTABLE_MAGIC 0xbeef
-
-	;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
-	;; That is not where we put our downloaded serial boot-code.
-	;; The length is enough for downloading code that loads the rest
-	;; of itself (after having setup the DRAM etc).
-	;; It is the same length as the on-chip ROM loads, so the same
-	;; host loader can be used to load a rescued product as well as
-	;; one booted through the Etrax serial boot code.
-
-#define CODE_START 0x40000000
-#define CODE_LENGTH 784
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
-#define NOP_DI 0xf025050f
-#define RAM_INIT_MAGIC 0x56902387
-
-	.text
-
-	;; This is the entry point of the rescue code
-	;; 0x80000000 if loaded in flash (as it should be)
-	;; Since etrax actually starts at address 2 when booting from flash, we
-	;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
-	nop
-	di
-
-	jump	in_cache	; enter cached area instead
-in_cache:
-
-
-	;; First put a jump test to give a possibility of upgrading the
-	;; rescue code without erasing/reflashing the sector.
-	;; We put a longword of -1 here and if it is not -1, we jump using
-	;; the value as jump target. Since we can always change 1's to 0's
-	;; without erasing the sector, it is possible to add new
-	;; code after this and altering the jumptarget in an upgrade.
-
-jtcd:	move.d	[jumptarget], $r0
-	cmp.d	0xffffffff, $r0
-	beq	no_newjump
-	nop
-
-	jump	[$r0]
-
-jumptarget:
-	.dword	0xffffffff	; can be overwritten later to insert new code
-
-no_newjump:
-#ifdef CONFIG_ETRAX_ETHERNET
-	;; Start MII clock to make sure it is running when tranceiver is reset
-	move.d 0x3, $r0    ; enable = on, phy = mii_clk
-	move.d $r0, [R_NETWORK_GEN_CONFIG]
-#endif
-
-	;; We need to setup the bus registers before we start using the DRAM
-#include "../../../arch-v10/lib/dram_init.S"
-
-	;; we now should go through the checksum-table and check the listed
-	;; partitions for errors.
-
-	move.d	PTABLE_START, $r3
-	move.d	[$r3], $r0
-	cmp.d	NOP_DI, $r0	; make sure the nop/di is there...
-	bne	do_rescue
-	nop
-
-	;; skip the code transparency block (10 bytes).
-
-	addq	10, $r3
-
-	;; check for correct magic
-
-	move.w	[$r3+], $r0
-	cmp.w	PTABLE_MAGIC, $r0
-	bne	do_rescue	; didn't recognize - trig rescue
-	nop
-
-	;; check for correct ptable checksum
-
-	movu.w	[$r3+], $r2	; ptable length
-	move.d	$r2, $r8	; save for later, length of total ptable
-	addq	28, $r8		; account for the rest
-	move.d	[$r3+], $r4	; ptable checksum
-	move.d	$r3, $r1
-	jsr	checksum	; r1 source, r2 length, returns in r0
-
-	cmp.d	$r0, $r4
-	bne	do_rescue	; didn't match - trig rescue
-	nop
-
-	;; ptable is ok. validate each entry.
-
-	moveq	-1, $r7
-
-ploop:	move.d	[$r3+], $r1	; partition offset (from ptable start)
-	bne	notfirst	; check if it is the partition containing ptable
-	nop			; yes..
-	move.d	$r8, $r1	; for its checksum check, skip the ptable
-	move.d	[$r3+], $r2	; partition length
-	sub.d	$r8, $r2	; minus the ptable length
-	ba	bosse
-	nop
-notfirst:
-	cmp.d	-1, $r1		; the end of the ptable ?
-	beq	flash_ok	;   if so, the flash is validated
-	move.d	[$r3+], $r2	; partition length
-bosse:	move.d	[$r3+], $r5	; checksum
-	move.d	[$r3+], $r4	; type and flags
-	addq	16, $r3		; skip the reserved bytes
-	btstq	16, $r4		; check ro flag
-	bpl	ploop		;   rw partition, skip validation
-	nop
-	btstq	17, $r4		; check bootable flag
-	bpl	1f
-	nop
-	move.d	$r1, $r7	; remember boot partition offset
-1:
-	add.d	PTABLE_START, $r1
-
-	jsr	checksum	; checksum the partition
-
-	cmp.d	$r0, $r5
-	beq	ploop		; checksums matched, go to next entry
-	nop
-
-	;; otherwise fall through to the rescue code.
-
-do_rescue:
-	;; setup port PA and PB default initial directions and data
-	;; (so we can flash LEDs, and so that DTR and others are set)
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
-	move.b	$r0, [R_PORT_PA_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
-	move.b	$r0, [R_PORT_PA_DATA]
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
-	move.b	$r0, [R_PORT_PB_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
-	move.b	$r0, [R_PORT_PB_DATA]
-
-	;; setup the serial port at 115200 baud
-
-	moveq	0, $r0
-	move.d	$r0, [SERXOFF]
-
-	move.b	0x99, $r0
-	move.b	$r0, [SERBAUD]	; 115.2kbaud for both transmit and receive
-
-	move.b	0x40, $r0	; rec enable
-	move.b	$r0, [SERRECC]
-
-	moveq	0, $r1		; "timer" to clock out a LED red flash
-	move.d	CODE_START, $r3	; destination counter
-	movu.w	CODE_LENGTH, $r4; length
-
-wait_ser:
-	addq	1, $r1
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
-	move.d	(1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
-	btstq	16, $r1
-	bpl	1f
-	nop
-	or.d	$r0, $r2	; set bit
-	ba	2f
-	nop
-1:	not	$r0		; clear bit
-	and.d	$r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	$r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	$r2, [R_PORT_PB_DATA]
-#endif
-#endif
-
-	;; check if we got something on the serial port
-
-	move.b	[SERSTAT], $r0
-	btstq	0, $r0		; data_avail
-	bpl	wait_ser
-	nop
-
-	;; got something - copy the byte and loop
-
-	move.b	[SERRDAT], $r0
-	move.b	$r0, [$r3+]
-
-	subq	1, $r4		; decrease length
-	bne	wait_ser
-	nop
-
-	;; jump into downloaded code
-
-	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
-					; initialized
-	jump	CODE_START
-
-flash_ok:
-	;; check r7, which contains either -1 or the partition to boot from
-
-	cmp.d	-1, $r7
-	bne	1f
-	nop
-	move.d	PTABLE_START, $r7; otherwise use the ptable start
-1:
-	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
-					; initialized
-	jump	$r7		; boot!
-
-
-	;; Helper subroutines
-
-	;; Will checksum by simple addition
-	;; r1 - source
-	;; r2 - length in bytes
-	;; result will be in r0
-checksum:
-	moveq	0, $r0
-	moveq   CONFIG_ETRAX_FLASH1_SIZE, $r6
-
-	;; If the first physical flash memory is exceeded wrap to the
-	;; second one
-	btstq	26, $r1		; Are we addressing first flash?
-	bpl	1f
-	nop
-	clear.d	$r6
-
-1:	test.d  $r6		; 0 = no wrapping
-	beq	2f
-	nop
-	lslq	20, $r6		; Convert MB to bytes
-	sub.d	$r1, $r6
-
-2:	addu.b	[$r1+], $r0
-	subq	1, $r6		; Flash memory left
-	beq	3f
-	subq	1, $r2		; Length left
-	bne	2b
-	nop
-	ret
-	nop
-
-3:	move.d	MEM_CSE1_START, $r1 ; wrap to second flash
-	ba	2b
-	nop
-
-#endif
diff --git a/arch/cris/boot/rescue/head_v32.S b/arch/cris/boot/rescue/head_v32.S
deleted file mode 100644
index 9eb04abaa0c0..000000000000
--- a/arch/cris/boot/rescue/head_v32.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start
- * kernel decompressor.
- *
- * In practice, this only works for NOR flash (or some convoluted RAM boot)
- * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only.
- *
- */
-
-#include <mach/startup.inc>
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-;; Code
-
-	.text
-start:
-
-	;; Start clocks for used blocks.
-	START_CLOCKS
-
-	move.d	CONFIG_ETRAX_PTABLE_SECTOR, $r10
-	jump	$r10			; Jump to decompressor
-	nop
-
-#endif
diff --git a/arch/cris/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S
deleted file mode 100644
index 3306098dee15..000000000000
--- a/arch/cris/boot/rescue/kimagerescue.S
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Rescue code to be prepended on a kimage and copied to the
- * rescue serial port.
- * This is called from the rescue code, it will copy received data to
- * 4004000 and after a timeout jump to it.
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define CODE_START 0x40004000
-#define CODE_LENGTH 784
-#define TIMEOUT_VALUE 1000
-
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
-	.text
-	;; This is the entry point of the rescue code
-	;; 0x80000000 if loaded in flash (as it should be)
-	;; since etrax actually starts at address 2 when booting from flash, we
-	;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
-	nop
-	di
-	;; setup port PA and PB default initial directions and data
-	;; (so we can flash LEDs, and so that DTR and others are set)
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
-	move.b	$r0, [R_PORT_PA_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
-	move.b	$r0, [R_PORT_PA_DATA]
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
-	move.b	$r0, [R_PORT_PB_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
-	move.b	$r0, [R_PORT_PB_DATA]
-
-	;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
-
-	;; Setup the stack to a suitably high address.
-	;; We assume 8 MB is the minimum DRAM in an eLinux
-	;; product and put the sp at the top for now.
-
-	move.d	0x40800000, $sp
-
-	;; setup the serial port at 115200 baud
-
-	moveq	0, $r0
-	move.d	$r0, [SERXOFF]
-
-	move.b	0x99, $r0
-	move.b	$r0, [SERBAUD]		; 115.2kbaud for both transmit
-					; and receive
-
-	move.b	0x40, $r0		; rec enable
-	move.b	$r0, [SERRECC]
-
-
-	moveq	0, $r1			; "timer" to clock out a LED red flash
-	move.d	CODE_START, $r3		; destination counter
-	move.d	CODE_LENGTH, $r4	; length
-	move.d	TIMEOUT_VALUE, $r5	; "timeout" until jump
-
-wait_ser:
-	addq	1, $r1
-	subq	1, $r5			; decrease timeout
-	beq	jump_start		; timed out
-	nop
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
-	move.d	(1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
-	btstq	16, $r1
-	bpl	1f
-	nop
-	or.d	$r0, $r2		; set bit
-	ba	2f
-	nop
-1:	not	$r0			; clear bit
-	and.d	$r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	$r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	$r2, [R_PORT_PB_DATA]
-#endif
-#endif
-
-	;; check if we got something on the serial port
-
-	move.b	[SERSTAT], $r0
-	btstq	0, $r0			; data_avail
-	bpl	wait_ser
-	nop
-
-	;; got something - copy the byte and loop
-
-	move.b	[SERRDAT], $r0
-	move.b	$r0, [$r3+]
-	move.d	TIMEOUT_VALUE, $r5	; reset "timeout"
-	subq	1, $r4			; decrease length
-	bne	wait_ser
-	nop
-jump_start:
-	;; jump into downloaded code
-
-	jump	CODE_START
diff --git a/arch/cris/boot/rescue/rescue_v10.lds b/arch/cris/boot/rescue/rescue_v10.lds
deleted file mode 100644
index e58a53f91728..000000000000
--- a/arch/cris/boot/rescue/rescue_v10.lds
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-MEMORY 
-	{
-	flash : ORIGIN = 0x00000000,
-	        LENGTH = 0x00100000
-	}
-
-SECTIONS
-{
-	.text :
-	{
-		stext = . ;
-		*(.text)
-		etext = . ;
-	} > flash
-	.data :
-	{
-		*(.data)
-		edata = . ;
-	} > flash
-}
diff --git a/arch/cris/boot/rescue/rescue_v32.lds b/arch/cris/boot/rescue/rescue_v32.lds
deleted file mode 100644
index f1542183f263..000000000000
--- a/arch/cris/boot/rescue/rescue_v32.lds
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*#OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_ARCH (crisv32)
-/* Now that NAND support has been stripped, this file could be simplified,
- * but it doesn't do any harm on the other hand so why bother. */
-
-MEMORY
-	{
-	bootblk : ORIGIN = 0x38000000,
-	          LENGTH = 0x00004000
-	intmem  : ORIGIN = 0x38004000,
-		  LENGTH = 0x00005000
-	}
-
-SECTIONS
-{
-	.text :
-	{
-		_stext = . ;
-		*(.text)
-		*(.init.text)
-		*(.rodata)
-		*(.rodata.*)
-		_etext = . ;
-	} > bootblk
-	.data :
-	{
-		*(.data)
-		_edata = . ;
-	} > bootblk
-	.bss :
-	{
-		_bss = . ;
-		*(.bss)
-		_end = ALIGN( 0x10 ) ;
-	} > intmem
-
-	/* Get rid of stuff from EXPORT_SYMBOL(foo). */
-	/DISCARD/ :
-	{
-	        *(__ksymtab_strings)
-	        *(__ksymtab)
-	}
-}
diff --git a/arch/cris/boot/rescue/testrescue.S b/arch/cris/boot/rescue/testrescue.S
deleted file mode 100644
index 06f78a0b0622..000000000000
--- a/arch/cris/boot/rescue/testrescue.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Simple testcode to download by the rescue block.
- * Just lights some LEDs to show it was downloaded correctly.
- *
- * Copyright (C) 1999 Axis Communications AB
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-	.text
-
-	nop
-	nop
-	moveq	-1, $r2
-	move.b	$r2, [R_PORT_PA_DIR]
-	moveq	0, $r2
-	move.b	$r2, [R_PORT_PA_DATA]
-
-endless:
-	nop
-	ba	endless
-	nop
-