arch: remove m32r port

The Mitsubishi/Renesas m32r architecture has been around for many years,
but the Linux port has been obsolete for a very long time as well, with
the last significant updates done for linux-2.6.14.

While some m32r microcontrollers are still being marketed by Renesas,
those are apparently no longer possible to support, mainly due to the
lack of an external memory interface.

Hirokazu Takata was the maintainer until the architecture got marked
Orphaned in 2014.

Link: http://www.linux-m32r.org/
Link: https://www.renesas.com/en-eu/products/microcontrollers-microprocessors/m32r.html
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 200 deletions

diff --git a/arch/m32r/include/asm/s1d13806.h b/arch/m32r/include/asm/s1d13806.h
deleted file mode 100644
index 79e98a259ebe..000000000000
--- a/arch/m32r/include/asm/s1d13806.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-//----------------------------------------------------------------------------
-//
-//  File generated by S1D13806CFG.EXE
-//
-//  Copyright (c) 2000,2001 Epson Research and Development, Inc.
-//  All rights reserved.
-//
-//----------------------------------------------------------------------------
-
-// Panel:  (active)  640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz)
-// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz)
-
-#define SWIVEL_VIEW		0	/* 0:none, 1:90 not completed */
-
-static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
-
-    {0x0001,0x00},   // Miscellaneous Register
-    {0x01FC,0x00},   // Display Mode Register
-#if defined(CONFIG_PLAT_MAPPI)
-    {0x0004,0x00},   // General IO Pins Configuration Register 0
-    {0x0005,0x00},   // General IO Pins Configuration Register 1
-    {0x0008,0x00},   // General IO Pins Control Register 0
-    {0x0009,0x00},   // General IO Pins Control Register 1
-    {0x0010,0x00},   // Memory Clock Configuration Register
-    {0x0014,0x00},   // LCD Pixel Clock Configuration Register
-    {0x0018,0x00},   // CRT/TV Pixel Clock Configuration Register
-    {0x001C,0x00},   // MediaPlug Clock Configuration Register
-/*
- * .. 10MHz: 0x00
- * .. 30MHz: 0x01
- * 30MHz ..: 0x02
- */
-    {0x001E,0x02},   // CPU To Memory Wait State Select Register
-    {0x0021,0x02},   // DRAM Refresh Rate Register
-    {0x002A,0x11},   // DRAM Timings Control Register 0
-    {0x002B,0x13},   // DRAM Timings Control Register 1
-    {0x0020,0x80},   // Memory Configuration Register
-    {0x0030,0x25},   // Panel Type Register
-    {0x0031,0x00},   // MOD Rate Register
-    {0x0032,0x4F},   // LCD Horizontal Display Width Register
-    {0x0034,0x12},   // LCD Horizontal Non-Display Period Register
-    {0x0035,0x01},   // TFT FPLINE Start Position Register
-    {0x0036,0x0B},   // TFT FPLINE Pulse Width Register
-    {0x0038,0xDF},   // LCD Vertical Display Height Register 0
-    {0x0039,0x01},   // LCD Vertical Display Height Register 1
-    {0x003A,0x2C},   // LCD Vertical Non-Display Period Register
-    {0x003B,0x0A},   // TFT FPFRAME Start Position Register
-    {0x003C,0x01},   // TFT FPFRAME Pulse Width Register
-
-    {0x0041,0x00},   // LCD Miscellaneous Register
-    {0x0042,0x00},   // LCD Display Start Address Register 0
-    {0x0043,0x00},   // LCD Display Start Address Register 1
-    {0x0044,0x00},   // LCD Display Start Address Register 2
-
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
-    {0x0004,0x07},   // GPIO[0:7] direction
-    {0x0005,0x00},   // GPIO[8:12] direction
-    {0x0008,0x00},   // GPIO[0:7] data
-    {0x0009,0x00},   // GPIO[8:12] data
-    {0x0008,0x04},   // LCD panel Vcc on
-    {0x0008,0x05},   // LCD panel reset
-    {0x0010,0x01},   // Memory Clock Configuration Register
-    {0x0014,0x30},   // LCD Pixel Clock Configuration Register (CLKI 22MHz/4)
-    {0x0018,0x00},   // CRT/TV Pixel Clock Configuration Register
-    {0x001C,0x00},   // MediaPlug Clock Configuration Register(10MHz)
-    {0x001E,0x00},   // CPU To Memory Wait State Select Register
-    {0x0020,0x80},   // Memory Configuration Register
-    {0x0021,0x03},   // DRAM Refresh Rate Register
-    {0x002A,0x00},   // DRAM Timings Control Register 0
-    {0x002B,0x01},   // DRAM Timings Control Register 1
-    {0x0030,0x25},   // Panel Type Register
-    {0x0031,0x00},   // MOD Rate Register
-    {0x0032,0x1d},   // LCD Horizontal Display Width Register
-    {0x0034,0x05},   // LCD Horizontal Non-Display Period Register
-    {0x0035,0x01},   // TFT FPLINE Start Position Register
-    {0x0036,0x01},   // TFT FPLINE Pulse Width Register
-    {0x0038,0x3F},   // LCD Vertical Display Height Register 0
-    {0x0039,0x01},   // LCD Vertical Display Height Register 1
-    {0x003A,0x0b},   // LCD Vertical Non-Display Period Register
-    {0x003B,0x07},   // TFT FPFRAME Start Position Register
-    {0x003C,0x02},   // TFT FPFRAME Pulse Width Register
-
-    {0x0041,0x00},   // LCD Miscellaneous Register
-#if (SWIVEL_VIEW == 0)
-    {0x0042,0x00},   // LCD Display Start Address Register 0
-    {0x0043,0x00},   // LCD Display Start Address Register 1
-    {0x0044,0x00},   // LCD Display Start Address Register 2
-
-#elif (SWIVEL_VIEW == 1)
-    // 1024 - W(320) = 0x2C0
-    {0x0042,0xC0},   // LCD Display Start Address Register 0
-    {0x0043,0x02},   // LCD Display Start Address Register 1
-    {0x0044,0x00},   // LCD Display Start Address Register 2
-    // 1024
-    {0x0046,0x00},   // LCD Memory Address Offset Register 0
-    {0x0047,0x02},   // LCD Memory Address Offset Register 1
-#else
-#error unsupported SWIVEL_VIEW mode
-#endif
-#else
-#error no platform configuration
-#endif  /* CONFIG_PLAT_XXX */
-
-    {0x0048,0x00},   // LCD Pixel Panning Register
-    {0x004A,0x00},   // LCD Display FIFO High Threshold Control Register
-    {0x004B,0x00},   // LCD Display FIFO Low Threshold Control Register
-    {0x0050,0x4F},   // CRT/TV Horizontal Display Width Register
-    {0x0052,0x13},   // CRT/TV Horizontal Non-Display Period Register
-    {0x0053,0x01},   // CRT/TV HRTC Start Position Register
-    {0x0054,0x0B},   // CRT/TV HRTC Pulse Width Register
-    {0x0056,0xDF},   // CRT/TV Vertical Display Height Register 0
-    {0x0057,0x01},   // CRT/TV Vertical Display Height Register 1
-    {0x0058,0x2B},   // CRT/TV Vertical Non-Display Period Register
-    {0x0059,0x09},   // CRT/TV VRTC Start Position Register
-    {0x005A,0x01},   // CRT/TV VRTC Pulse Width Register
-    {0x005B,0x10},   // TV Output Control Register
-
-    {0x0062,0x00},   // CRT/TV Display Start Address Register 0
-    {0x0063,0x00},   // CRT/TV Display Start Address Register 1
-    {0x0064,0x00},   // CRT/TV Display Start Address Register 2
-
-    {0x0068,0x00},   // CRT/TV Pixel Panning Register
-    {0x006A,0x00},   // CRT/TV Display FIFO High Threshold Control Register
-    {0x006B,0x00},   // CRT/TV Display FIFO Low Threshold Control Register
-    {0x0070,0x00},   // LCD Ink/Cursor Control Register
-    {0x0071,0x01},   // LCD Ink/Cursor Start Address Register
-    {0x0072,0x00},   // LCD Cursor X Position Register 0
-    {0x0073,0x00},   // LCD Cursor X Position Register 1
-    {0x0074,0x00},   // LCD Cursor Y Position Register 0
-    {0x0075,0x00},   // LCD Cursor Y Position Register 1
-    {0x0076,0x00},   // LCD Ink/Cursor Blue Color 0 Register
-    {0x0077,0x00},   // LCD Ink/Cursor Green Color 0 Register
-    {0x0078,0x00},   // LCD Ink/Cursor Red Color 0 Register
-    {0x007A,0x1F},   // LCD Ink/Cursor Blue Color 1 Register
-    {0x007B,0x3F},   // LCD Ink/Cursor Green Color 1 Register
-    {0x007C,0x1F},   // LCD Ink/Cursor Red Color 1 Register
-    {0x007E,0x00},   // LCD Ink/Cursor FIFO Threshold Register
-    {0x0080,0x00},   // CRT/TV Ink/Cursor Control Register
-    {0x0081,0x01},   // CRT/TV Ink/Cursor Start Address Register
-    {0x0082,0x00},   // CRT/TV Cursor X Position Register 0
-    {0x0083,0x00},   // CRT/TV Cursor X Position Register 1
-    {0x0084,0x00},   // CRT/TV Cursor Y Position Register 0
-    {0x0085,0x00},   // CRT/TV Cursor Y Position Register 1
-    {0x0086,0x00},   // CRT/TV Ink/Cursor Blue Color 0 Register
-    {0x0087,0x00},   // CRT/TV Ink/Cursor Green Color 0 Register
-    {0x0088,0x00},   // CRT/TV Ink/Cursor Red Color 0 Register
-    {0x008A,0x1F},   // CRT/TV Ink/Cursor Blue Color 1 Register
-    {0x008B,0x3F},   // CRT/TV Ink/Cursor Green Color 1 Register
-    {0x008C,0x1F},   // CRT/TV Ink/Cursor Red Color 1 Register
-    {0x008E,0x00},   // CRT/TV Ink/Cursor FIFO Threshold Register
-    {0x0100,0x00},   // BitBlt Control Register 0
-    {0x0101,0x00},   // BitBlt Control Register 1
-    {0x0102,0x00},   // BitBlt ROP Code/Color Expansion Register
-    {0x0103,0x00},   // BitBlt Operation Register
-    {0x0104,0x00},   // BitBlt Source Start Address Register 0
-    {0x0105,0x00},   // BitBlt Source Start Address Register 1
-    {0x0106,0x00},   // BitBlt Source Start Address Register 2
-    {0x0108,0x00},   // BitBlt Destination Start Address Register 0
-    {0x0109,0x00},   // BitBlt Destination Start Address Register 1
-    {0x010A,0x00},   // BitBlt Destination Start Address Register 2
-    {0x010C,0x00},   // BitBlt Memory Address Offset Register 0
-    {0x010D,0x00},   // BitBlt Memory Address Offset Register 1
-    {0x0110,0x00},   // BitBlt Width Register 0
-    {0x0111,0x00},   // BitBlt Width Register 1
-    {0x0112,0x00},   // BitBlt Height Register 0
-    {0x0113,0x00},   // BitBlt Height Register 1
-    {0x0114,0x00},   // BitBlt Background Color Register 0
-    {0x0115,0x00},   // BitBlt Background Color Register 1
-    {0x0118,0x00},   // BitBlt Foreground Color Register 0
-    {0x0119,0x00},   // BitBlt Foreground Color Register 1
-    {0x01E0,0x00},   // Look-Up Table Mode Register
-    {0x01E2,0x00},   // Look-Up Table Address Register
-    {0x01F0,0x10},   // Power Save Configuration Register
-    {0x01F1,0x00},   // Power Save Status Register
-    {0x01F4,0x00},   // CPU-to-Memory Access Watchdog Timer Register
-#if (SWIVEL_VIEW == 0)
-    {0x01FC,0x01},   // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
-#elif (SWIVEL_VIEW == 1)
-    {0x01FC,0x41},   // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
-#else
-#error unsupported SWIVEL_VIEW mode
-#endif  /* SWIVEL_VIEW */
-
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
-    {0x0008,0x07},   // LCD panel Vdd & Vg on
-#endif
-
-    {0x0040,0x05},   // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
-#if defined(CONFIG_PLAT_MAPPI)
-    {0x0046,0x80},   // LCD Memory Address Offset Register 0
-    {0x0047,0x02},   // LCD Memory Address Offset Register 1
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
-    {0x0046,0xf0},   // LCD Memory Address Offset Register 0
-    {0x0047,0x00},   // LCD Memory Address Offset Register 1
-#endif
-    {0x0060,0x05},   // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
-    {0x0066,0x80},   // CRT/TV Memory Address Offset Register 0	// takeo
-    {0x0067,0x02},   // CRT/TV Memory Address Offset Register 1
-};