Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 11 insertions, 11 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index e306384b1414..bb91b8923a49 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00   Aug. 02 2005
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00  Aug. 02 2005
  *
  * BRIEF MODULE DESCRIPTION
  * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
@@ -27,14 +27,14 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
- *       Interface and Linux Device Driver" Application Note.
+ *	 Interface and Linux Device Driver" Application Note.
  */
 
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 #define DMA_WAIT_TIMEOUT	100
-#define NUM_DESCRIPTORS 	PRD_ENTRIES
+#define NUM_DESCRIPTORS		PRD_ENTRIES
 #else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
-#define NUM_DESCRIPTORS 	2
+#define NUM_DESCRIPTORS		2
 #endif
 
 #ifndef AU1XXX_ATA_RQSIZE
@@ -84,8 +84,8 @@ typedef struct {
 #define TWP_MASK		(0x3F << 14)
 #define TCSW_MASK		(0x0F << 10)
 #define TPM_MASK		(0x0F << 6)
-#define TA_MASK 		(0x3F << 0)
-#define TS_MASK 		(1 << 8)
+#define TA_MASK			(0x3F << 0)
+#define TS_MASK			(1 << 8)
 
 /* Timing parameters PIO mode 0 */
 #define SBC_IDE_PIO0_TCSOE	(0x04 << 29)
@@ -96,7 +96,7 @@ typedef struct {
 #define SBC_IDE_PIO0_TWP	(0x10 << 14)
 #define SBC_IDE_PIO0_TCSW	(0x04 << 10)
 #define SBC_IDE_PIO0_TPM	(0x00 << 6)
-#define SBC_IDE_PIO0_TA 	(0x15 << 0)
+#define SBC_IDE_PIO0_TA		(0x15 << 0)
 /* Timing parameters PIO mode 1 */
 #define SBC_IDE_PIO1_TCSOE	(0x03 << 29)
 #define SBC_IDE_PIO1_TOECS	(0x01 << 26)
@@ -106,7 +106,7 @@ typedef struct {
 #define SBC_IDE_PIO1_TWP	(0x08 << 14)
 #define SBC_IDE_PIO1_TCSW	(0x03 << 10)
 #define SBC_IDE_PIO1_TPM	(0x00 << 6)
-#define SBC_IDE_PIO1_TA 	(0x0B << 0)
+#define SBC_IDE_PIO1_TA		(0x0B << 0)
 /* Timing parameters PIO mode 2 */
 #define SBC_IDE_PIO2_TCSOE	(0x05 << 29)
 #define SBC_IDE_PIO2_TOECS	(0x01 << 26)
@@ -116,7 +116,7 @@ typedef struct {
 #define SBC_IDE_PIO2_TWP	(0x1F << 14)
 #define SBC_IDE_PIO2_TCSW	(0x05 << 10)
 #define SBC_IDE_PIO2_TPM	(0x00 << 6)
-#define SBC_IDE_PIO2_TA 	(0x22 << 0)
+#define SBC_IDE_PIO2_TA		(0x22 << 0)
 /* Timing parameters PIO mode 3 */
 #define SBC_IDE_PIO3_TCSOE	(0x05 << 29)
 #define SBC_IDE_PIO3_TOECS	(0x01 << 26)
@@ -126,7 +126,7 @@ typedef struct {
 #define SBC_IDE_PIO3_TWP	(0x15 << 14)
 #define SBC_IDE_PIO3_TCSW	(0x05 << 10)
 #define SBC_IDE_PIO3_TPM	(0x00 << 6)
-#define SBC_IDE_PIO3_TA 	(0x1A << 0)
+#define SBC_IDE_PIO3_TA		(0x1A << 0)
 /* Timing parameters PIO mode 4 */
 #define SBC_IDE_PIO4_TCSOE	(0x04 << 29)
 #define SBC_IDE_PIO4_TOECS	(0x01 << 26)
@@ -136,7 +136,7 @@ typedef struct {
 #define SBC_IDE_PIO4_TWP	(0x0D << 14)
 #define SBC_IDE_PIO4_TCSW	(0x03 << 10)
 #define SBC_IDE_PIO4_TPM	(0x00 << 6)
-#define SBC_IDE_PIO4_TA 	(0x12 << 0)
+#define SBC_IDE_PIO4_TA		(0x12 << 0)
 /* Timing parameters MDMA mode 0 */
 #define SBC_IDE_MDMA0_TCSOE	(0x03 << 29)
 #define SBC_IDE_MDMA0_TOECS	(0x01 << 26)