MIPS: Alchemy: move ethernet registers to ethernet driver

Move the register offsets and bit descriptions from the au1000.h header
to their only user, the au1000_eth.c driver.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: netdev@vger.kernel.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7460/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 126 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 60754fc63981..e50671019122 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -1003,132 +1003,6 @@ enum soc_au1200_ints {
 #define SYS_RTCMATCH2		(SYS_BASE + 0x54)
 #define SYS_RTCREAD		(SYS_BASE + 0x58)
 
-/* Ethernet Controllers  */
-
-/* 4 byte offsets from AU1000_ETH_BASE */
-#define MAC_CONTROL		0x0
-#  define MAC_RX_ENABLE		(1 << 2)
-#  define MAC_TX_ENABLE		(1 << 3)
-#  define MAC_DEF_CHECK		(1 << 5)
-#  define MAC_SET_BL(X)		(((X) & 0x3) << 6)
-#  define MAC_AUTO_PAD		(1 << 8)
-#  define MAC_DISABLE_RETRY	(1 << 10)
-#  define MAC_DISABLE_BCAST	(1 << 11)
-#  define MAC_LATE_COL		(1 << 12)
-#  define MAC_HASH_MODE		(1 << 13)
-#  define MAC_HASH_ONLY		(1 << 15)
-#  define MAC_PASS_ALL		(1 << 16)
-#  define MAC_INVERSE_FILTER	(1 << 17)
-#  define MAC_PROMISCUOUS	(1 << 18)
-#  define MAC_PASS_ALL_MULTI	(1 << 19)
-#  define MAC_FULL_DUPLEX	(1 << 20)
-#  define MAC_NORMAL_MODE	0
-#  define MAC_INT_LOOPBACK	(1 << 21)
-#  define MAC_EXT_LOOPBACK	(1 << 22)
-#  define MAC_DISABLE_RX_OWN	(1 << 23)
-#  define MAC_BIG_ENDIAN	(1 << 30)
-#  define MAC_RX_ALL		(1 << 31)
-#define MAC_ADDRESS_HIGH	0x4
-#define MAC_ADDRESS_LOW		0x8
-#define MAC_MCAST_HIGH		0xC
-#define MAC_MCAST_LOW		0x10
-#define MAC_MII_CNTRL		0x14
-#  define MAC_MII_BUSY		(1 << 0)
-#  define MAC_MII_READ		0
-#  define MAC_MII_WRITE		(1 << 1)
-#  define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
-#  define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
-#define MAC_MII_DATA		0x18
-#define MAC_FLOW_CNTRL		0x1C
-#  define MAC_FLOW_CNTRL_BUSY	(1 << 0)
-#  define MAC_FLOW_CNTRL_ENABLE (1 << 1)
-#  define MAC_PASS_CONTROL	(1 << 2)
-#  define MAC_SET_PAUSE(X)	(((X) & 0xffff) << 16)
-#define MAC_VLAN1_TAG		0x20
-#define MAC_VLAN2_TAG		0x24
-
-/* Ethernet Controller Enable */
-
-#  define MAC_EN_CLOCK_ENABLE	(1 << 0)
-#  define MAC_EN_RESET0		(1 << 1)
-#  define MAC_EN_TOSS		(0 << 2)
-#  define MAC_EN_CACHEABLE	(1 << 3)
-#  define MAC_EN_RESET1		(1 << 4)
-#  define MAC_EN_RESET2		(1 << 5)
-#  define MAC_DMA_RESET		(1 << 6)
-
-/* Ethernet Controller DMA Channels */
-
-#define MAC0_TX_DMA_ADDR	0xB4004000
-#define MAC1_TX_DMA_ADDR	0xB4004200
-/* offsets from MAC_TX_RING_ADDR address */
-#define MAC_TX_BUFF0_STATUS	0x0
-#  define TX_FRAME_ABORTED	(1 << 0)
-#  define TX_JAB_TIMEOUT	(1 << 1)
-#  define TX_NO_CARRIER		(1 << 2)
-#  define TX_LOSS_CARRIER	(1 << 3)
-#  define TX_EXC_DEF		(1 << 4)
-#  define TX_LATE_COLL_ABORT	(1 << 5)
-#  define TX_EXC_COLL		(1 << 6)
-#  define TX_UNDERRUN		(1 << 7)
-#  define TX_DEFERRED		(1 << 8)
-#  define TX_LATE_COLL		(1 << 9)
-#  define TX_COLL_CNT_MASK	(0xF << 10)
-#  define TX_PKT_RETRY		(1 << 31)
-#define MAC_TX_BUFF0_ADDR	0x4
-#  define TX_DMA_ENABLE		(1 << 0)
-#  define TX_T_DONE		(1 << 1)
-#  define TX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
-#define MAC_TX_BUFF0_LEN	0x8
-#define MAC_TX_BUFF1_STATUS	0x10
-#define MAC_TX_BUFF1_ADDR	0x14
-#define MAC_TX_BUFF1_LEN	0x18
-#define MAC_TX_BUFF2_STATUS	0x20
-#define MAC_TX_BUFF2_ADDR	0x24
-#define MAC_TX_BUFF2_LEN	0x28
-#define MAC_TX_BUFF3_STATUS	0x30
-#define MAC_TX_BUFF3_ADDR	0x34
-#define MAC_TX_BUFF3_LEN	0x38
-
-#define MAC0_RX_DMA_ADDR	0xB4004100
-#define MAC1_RX_DMA_ADDR	0xB4004300
-/* offsets from MAC_RX_RING_ADDR */
-#define MAC_RX_BUFF0_STATUS	0x0
-#  define RX_FRAME_LEN_MASK	0x3fff
-#  define RX_WDOG_TIMER		(1 << 14)
-#  define RX_RUNT		(1 << 15)
-#  define RX_OVERLEN		(1 << 16)
-#  define RX_COLL		(1 << 17)
-#  define RX_ETHER		(1 << 18)
-#  define RX_MII_ERROR		(1 << 19)
-#  define RX_DRIBBLING		(1 << 20)
-#  define RX_CRC_ERROR		(1 << 21)
-#  define RX_VLAN1		(1 << 22)
-#  define RX_VLAN2		(1 << 23)
-#  define RX_LEN_ERROR		(1 << 24)
-#  define RX_CNTRL_FRAME	(1 << 25)
-#  define RX_U_CNTRL_FRAME	(1 << 26)
-#  define RX_MCAST_FRAME	(1 << 27)
-#  define RX_BCAST_FRAME	(1 << 28)
-#  define RX_FILTER_FAIL	(1 << 29)
-#  define RX_PACKET_FILTER	(1 << 30)
-#  define RX_MISSED_FRAME	(1 << 31)
-
-#  define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN |  \
-		    RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
-		    RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
-#define MAC_RX_BUFF0_ADDR	0x4
-#  define RX_DMA_ENABLE		(1 << 0)
-#  define RX_T_DONE		(1 << 1)
-#  define RX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
-#  define RX_SET_BUFF_ADDR(X)	((X) & 0xffffffc0)
-#define MAC_RX_BUFF1_STATUS	0x10
-#define MAC_RX_BUFF1_ADDR	0x14
-#define MAC_RX_BUFF2_STATUS	0x20
-#define MAC_RX_BUFF2_ADDR	0x24
-#define MAC_RX_BUFF3_STATUS	0x30
-#define MAC_RX_BUFF3_ADDR	0x34
-
 
 /*
  * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not