Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS changes from Paul Burton:
 "Nothing too big or scary in here:

   - Support mremap() for the VDSO, primarily to allow CRIU to restore
     the VDSO to its checkpointed location.

   - Restore the MIPS32 cBPF JIT, after having reverted the enablement
     of the eBPF JIT for MIPS32 systems in the 5.5 cycle.

   - Improve cop0 counter synchronization behaviour whilst onlining CPUs
     by running with interrupts disabled.

   - Better match FPU behaviour when emulating multiply-accumulate
     instructions on pre-r6 systems that implement IEEE754-2008 style
     MACs.

   - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them
     to take advantage of instructions introduced by r2.

   - Support for the Ingenic X1000 SoC & the really nice little CU Neo
     development board that's using it.

   - Support for WMAC on GARDENA Smart Gateway devices.

   - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
     preparation for introducing IP35 (Origin 3*) support.

   - Various Kconfig & Makefile cleanups"

* tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits)
  MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel
  MIPS: Loongson64: Disable exec hazard
  MIPS: Loongson64: Bump ISA level to MIPSR2
  MIPS: Make DIEI support as a config option
  MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too"
  MIPS: asm: local: add barriers for Loongson
  MIPS: Loongson64: Select mac2008 only feature
  MIPS: Add MAC2008 Support
  Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel"
  MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again)
  MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
  MIPS: generic: don't unconditionally select PINCTRL
  MIPS: don't explicitly select LIBFDT in Kconfig
  MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts
  MIPS: SGI-IP30: Check for valid pointer before using it
  MIPS: syscalls: fix indentation of the 'SYSNR' message
  MIPS: boot: fix typo in 'vmlinux.lzma.its' target
  MIPS: fix indentation of the 'RELOCS' message
  dt-bindings: Document loongson vendor-prefix
  MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi.
  ...

1 files changed, 35 insertions, 18 deletions

diff --git a/arch/mips/math-emu/dp_maddf.c b/arch/mips/math-emu/dp_maddf.c
index 3da0ce44cdef..e24ef374d828 100644
--- a/arch/mips/math-emu/dp_maddf.c
+++ b/arch/mips/math-emu/dp_maddf.c
@@ -68,6 +68,12 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 
 	ieee754_clearcx();
 
+	rs = xs ^ ys;
+	if (flags & MADDF_NEGATE_PRODUCT)
+		rs ^= 1;
+	if (flags & MADDF_NEGATE_ADDITION)
+		zs ^= 1;
+
 	/*
 	 * Handle the cases when at least one of x, y or z is a NaN.
 	 * Order of precedence is sNaN, qNaN and z, x, y.
@@ -104,9 +110,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_NORM):
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_DNORM):
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_INF):
-		if ((zc == IEEE754_CLASS_INF) &&
-		    ((!(flags & MADDF_NEGATE_PRODUCT) && (zs != (xs ^ ys))) ||
-		     ((flags & MADDF_NEGATE_PRODUCT) && (zs == (xs ^ ys))))) {
+		if ((zc == IEEE754_CLASS_INF) && (zs != rs)) {
 			/*
 			 * Cases of addition of infinities with opposite signs
 			 * or subtraction of infinities with same signs.
@@ -116,15 +120,10 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 		}
 		/*
 		 * z is here either not an infinity, or an infinity having the
-		 * same sign as product (x*y) (in case of MADDF.D instruction)
-		 * or product -(x*y) (in MSUBF.D case). The result must be an
-		 * infinity, and its sign is determined only by the value of
-		 * (flags & MADDF_NEGATE_PRODUCT) and the signs of x and y.
+		 * same sign as product (x*y). The result must be an infinity,
+		 * and its sign is determined only by the sign of product (x*y).
 		 */
-		if (flags & MADDF_NEGATE_PRODUCT)
-			return ieee754dp_inf(1 ^ (xs ^ ys));
-		else
-			return ieee754dp_inf(xs ^ ys);
+		return ieee754dp_inf(rs);
 
 	case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_ZERO):
 	case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_NORM):
@@ -135,10 +134,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 			return ieee754dp_inf(zs);
 		if (zc == IEEE754_CLASS_ZERO) {
 			/* Handle cases +0 + (-0) and similar ones. */
-			if ((!(flags & MADDF_NEGATE_PRODUCT)
-					&& (zs == (xs ^ ys))) ||
-			    ((flags & MADDF_NEGATE_PRODUCT)
-					&& (zs != (xs ^ ys))))
+			if (zs == rs)
 				/*
 				 * Cases of addition of zeros of equal signs
 				 * or subtraction of zeroes of opposite signs.
@@ -187,9 +183,6 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 	assert(ym & DP_HIDDEN_BIT);
 
 	re = xe + ye;
-	rs = xs ^ ys;
-	if (flags & MADDF_NEGATE_PRODUCT)
-		rs ^= 1;
 
 	/* shunt to top of word */
 	xm <<= 64 - (DP_FBITS + 1);
@@ -340,3 +333,27 @@ union ieee754dp ieee754dp_msubf(union ieee754dp z, union ieee754dp x,
 {
 	return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
 }
+
+union ieee754dp ieee754dp_madd(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, 0);
+}
+
+union ieee754dp ieee754dp_msub(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, MADDF_NEGATE_ADDITION);
+}
+
+union ieee754dp ieee754dp_nmadd(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT|MADDF_NEGATE_ADDITION);
+}
+
+union ieee754dp ieee754dp_nmsub(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
+}