powerpc/8xx: Rework CONFIG_PIN_TLB handling

On recent kernels, with some debug options like for instance
CONFIG_LOCKDEP, the BSS requires more than 8M memory, allthough
the kernel code fits in the first 8M.
Today, it is necessary to activate CONFIG_PIN_TLB to get more than 8M
at startup, allthough pinning TLB is not necessary for that.

We could have inconditionaly mapped 16 or 24M bytes at startup
but some old hardware only have 8M and mapping non-existing RAM
would be an issue due to speculative accesses.

With the preceding patch however, the TLB entries are populated on
demand. By setting up the TLB miss handler to handle up to 24M until
the handler is patched for the entire memory space, it is possible
to allow access up to more memory without mapping non-existing RAM.

It is therefore not needed anymore to map memory data at all
at startup. It will be handled by the TLB miss handler.

One might still want to PIN the IMMR and the first 24M of RAM.
It is now possible to do it in the C memory initialisation
functions. In addition, we now know how much memory we have
when we do it, so we are able to adapt the pining to the
real amount of memory available. So boards with less than 24M
can now also benefit from PIN_TLB.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>

1 files changed, 4 insertions, 40 deletions

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 3de7d02c36ce..00cc9df7d322 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -491,7 +491,7 @@ _ENTRY(DTLBMiss_jmp)
 
 4:
 _ENTRY(DTLBMiss_cmp)
-	cmpli	cr0, r11, PAGE_OFFSET@h
+	cmpli	cr0, r11, (PAGE_OFFSET + 0x1800000)@h
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 	bge-	3b
 
@@ -586,7 +586,7 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	BRANCH_UNLESS_KERNEL(3f)
 	rlwinm	r11, r10, 16, 0xfff8
 _ENTRY(FixupDAR_cmp)
-	cmpli	cr7, r11, PAGE_OFFSET@h
+	cmpli	cr7, r11, (PAGE_OFFSET + 0x1800000)@h
 	blt-	cr7, 200f
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 	/* Insert level 1 index */
@@ -823,23 +823,16 @@ initial_mmu:
 	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
 #endif
 
-	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
-	 * we can load the instruction and data TLB registers with the
-	 * same values.
-	 */
+	/* Now map the lower 8 Meg into the ITLB. */
 	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
 	ori	r8, r8, MI_EVALID	/* Mark it valid */
 	mtspr	SPRN_MI_EPN, r8
-	mtspr	SPRN_MD_EPN, r8
 	li	r8, MI_PS8MEG | (2 << 5)	/* Set 8M byte page, APG 2 */
 	ori	r8, r8, MI_SVALID	/* Make it valid */
 	mtspr	SPRN_MI_TWC, r8
-	li	r8, MI_PS8MEG		/* Set 8M byte page, APG 0 */
-	ori	r8, r8, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r8
 	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
 	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
-	mtspr	SPRN_MD_RPN, r8
+
 	lis	r8, MI_APG_INIT@h	/* Set protection modes */
 	ori	r8, r8, MI_APG_INIT@l
 	mtspr	SPRN_MI_AP, r8
@@ -851,9 +844,6 @@ initial_mmu:
 	 * internal registers (among other things).
 	 */
 #ifdef CONFIG_PIN_TLB
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-#endif
 	mfspr	r9, 638			/* Get current IMMR */
 	andis.	r9, r9, 0xfff8		/* Get 512 kbytes boundary */
 
@@ -866,32 +856,6 @@ initial_mmu:
 	mr	r8, r9			/* Create paddr for TLB */
 	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
 	mtspr	SPRN_MD_RPN, r8
-
-#ifdef CONFIG_PIN_TLB
-	/* Map two more 8M kernel data pages.
-	*/
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	addis	r8, r8, 0x0080		/* Add 8M */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r9, MI_PS8MEG		/* Set 8M byte page */
-	ori	r9, r9, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r9
-	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	addis	r8, r8, 0x0080		/* Add 8M */
-	mtspr	SPRN_MD_EPN, r8
-	mtspr	SPRN_MD_TWC, r9
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
 #endif
 
 	/* Since the cache is enabled according to the information we