diff options
| author | Emil Renner Berthing <emil.renner.berthing@canonical.com> | 2023-11-30 16:19:32 +0100 |
|---|---|---|
| committer | Conor Dooley <conor.dooley@microchip.com> | 2023-12-13 15:50:23 +0000 |
| commit | 56b10953da7e9e92eb1a72860db656ac6a5699a1 (patch) | |
| tree | 35231e182f65e2c3411f588d920eecdc74023f7f /arch/riscv/boot | |
| parent | c548409cfe03d2ed73a7ea25499ae8f3a8e69551 (diff) | |
riscv: dts: starfive: Enable SDIO wifi on JH7100 boards
Add pinctrl and MMC controller nodes for the Broadcom wifi controller
on the BeagleV Starlight and StarFive VisionFive V1 boards.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Diffstat (limited to 'arch/riscv/boot')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-common.dtsi | 60 |
1 files changed, 60 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi index adcdbbc4f57f..42fb61c36068 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi @@ -13,6 +13,7 @@ / { aliases { mmc0 = &sdio0; + mmc1 = &sdio1; serial0 = &uart3; }; @@ -64,6 +65,11 @@ <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>, <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>; }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; }; &gpio { @@ -146,6 +152,41 @@ }; }; + sdio1_pins: sdio1-0 { + clk-pins { + pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT, + GPO_ENABLE, GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + sdio-pins { + pinmux = <GPIOMUX(29, + GPO_SDIO1_PAD_CCMD_OUT, + GPO_SDIO1_PAD_CCMD_OEN, + GPI_SDIO1_PAD_CCMD_IN)>, + <GPIOMUX(36, + GPO_SDIO1_PAD_CDATA_OUT_BIT0, + GPO_SDIO1_PAD_CDATA_OEN_BIT0, + GPI_SDIO1_PAD_CDATA_IN_BIT0)>, + <GPIOMUX(30, + GPO_SDIO1_PAD_CDATA_OUT_BIT1, + GPO_SDIO1_PAD_CDATA_OEN_BIT1, + GPI_SDIO1_PAD_CDATA_IN_BIT1)>, + <GPIOMUX(34, + GPO_SDIO1_PAD_CDATA_OUT_BIT2, + GPO_SDIO1_PAD_CDATA_OEN_BIT2, + GPI_SDIO1_PAD_CDATA_IN_BIT2)>, + <GPIOMUX(31, + GPO_SDIO1_PAD_CDATA_OUT_BIT3, + GPO_SDIO1_PAD_CDATA_OEN_BIT3, + GPI_SDIO1_PAD_CDATA_IN_BIT3)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + uart3_pins: uart3-0 { rx-pins { pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE, @@ -225,6 +266,25 @@ status = "okay"; }; +&sdio1 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + cap-power-off-card; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio1_pins>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; |