summaryrefslogtreecommitdiff
path: root/arch/sh/drivers
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2009-04-20 21:42:59 +0900
committerPaul Mundt <lethal@linux-sh.org>2009-04-20 21:42:59 +0900
commit2d5efc190eb415dbff79ffab4f8ea731ab0288a9 (patch)
tree3c086544eece0de283755ee14181bbcaa3a4eb1c /arch/sh/drivers
parent951a681bda844491de8699b3bdc6c3899cbd4c9f (diff)
sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/.
The se7751 was still doing the PCI fixups in its own board directory, so we move it over to arch/sh/drivers/pci/ with the rest of the board fixups. It has bitrotted significantly over the years, so will still likely need a bit of work to bring back up to date. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/drivers')
-rw-r--r--arch/sh/drivers/pci/Makefile1
-rw-r--r--arch/sh/drivers/pci/fixups-se7751.c111
2 files changed, 112 insertions, 0 deletions
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index fbebd73b22f6..e388a70d1463 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
pci-dreamcast.o
obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
obj-$(CONFIG_SH_SH03) += fixups-sh03.o
obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
new file mode 100644
index 000000000000..475fa9f0fe2c
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-se7751.c
@@ -0,0 +1,111 @@
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 0: return 13;
+ case 1: return 13; /* AMD Ethernet controller */
+ case 2: return -1;
+ case 3: return -1;
+ case 4: return -1;
+ default:
+ printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
+ return -1;
+ }
+}
+
+#define PCIMCR_MRSET_OFF 0xBFFFFFFF
+#define PCIMCR_RFSH_OFF 0xFFFFFFFB
+
+/*
+ * Only long word accesses of the PCIC's internal local registers and the
+ * configuration registers from the CPU is supported.
+ */
+#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
+#define PCIC_READ(x) readl(PCI_REG(x))
+
+/*
+ * Description: This function sets up and initializes the pcic, sets
+ * up the BARS, maps the DRAM into the address space etc, etc.
+ */
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+ unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
+ unsigned short bcr2;
+
+ /*
+ * Initialize the slave bus controller on the pcic. The values used
+ * here should not be hardcoded, but they should be taken from the bsc
+ * on the processor, to make this function as generic as possible.
+ * (i.e. Another sbc may usr different SDRAM timing settings -- in order
+ * for the pcic to work, its settings need to be exactly the same.)
+ */
+ bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
+ bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
+ wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
+ wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
+ wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
+ mcr = (*(volatile unsigned long*)(SH7751_MCR));
+
+ bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
+ (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
+
+ bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
+ PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
+ PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
+ PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
+ PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
+ mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+ PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
+
+
+ /* Enable all interrupts, so we know what to fix */
+ PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
+ PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
+
+ /* Set up standard PCI config registers */
+ PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
+ PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
+ PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
+ PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
+ PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
+ PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
+ PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
+ PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
+ PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
+ PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
+
+ /* Now turn it on... */
+ PCIC_WRITE(SH7751_PCICR, 0xa5000001);
+
+ /*
+ * Set PCIMBR and PCIIOBR here, assuming a single window
+ * (16M MEM, 256K IO) is enough. If a larger space is
+ * needed, the readx/writex and inx/outx functions will
+ * have to do more (e.g. setting registers for each call).
+ */
+
+ /*
+ * Set the MBR so PCI address is one-to-one with window,
+ * meaning all calls go straight through... use BUG_ON to
+ * catch erroneous assumption.
+ */
+ BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
+
+ PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
+
+ /* Set IOBR for window containing area specified in pci.h */
+ PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
+
+ /* All done, may as well say so... */
+ printk("SH7751 PCI: Finished initialization of the PCI controller\n");
+
+ return 1;
+}