arch: remove unicore32 port

The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.

Guenter Roeck says:

  I have stopped building unicore32 images since v4.19 since there is no
  available compiler that is still supported by the kernel. I am surprised
  that support for it has not been removed from the kernel.

Remove unicore32 port.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 371 deletions

diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
deleted file mode 100644
index 0d098aa05b47..000000000000
--- a/arch/unicore32/kernel/pci.c
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pci.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  PCI bios-type initialisation for PCI machines
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-static int debug_pci;
-
-#define CONFIG_CMD(bus, devfn, where)	\
-	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 *value)
-{
-	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
-	switch (size) {
-	case 1:
-		*value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
-		break;
-	case 2:
-		*value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
-		break;
-	case 4:
-		*value = readl(PCICFG_DATA);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 value)
-{
-	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
-	switch (size) {
-	case 1:
-		writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
-			| FIELD(value, 8, (where&3)*8), PCICFG_DATA);
-		break;
-	case 2:
-		writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
-			| FIELD(value, 16, (where&2)*8), PCICFG_DATA);
-		break;
-	case 4:
-		writel(value, PCICFG_DATA);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops pci_puv3_ops = {
-	.read  = puv3_read_config,
-	.write = puv3_write_config,
-};
-
-void pci_puv3_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
-	/* config PCI bridge base */
-	writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
-
-	writel(0, PCIBRI_AHBCTL0);
-	writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
-	writel(0xFFFF0000, PCIBRI_AHBAMR0);
-	writel(0, PCIBRI_AHBTAR0);
-
-	writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
-	writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
-	writel(0xFFFF0000, PCIBRI_AHBAMR1);
-	writel(0x00000000, PCIBRI_AHBTAR1);
-
-	writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
-	writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
-	writel(0xF8000000, PCIBRI_AHBAMR2);
-	writel(0, PCIBRI_AHBTAR2);
-
-	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
-
-	writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
-	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
-	writel(0xF8000000, PCIBRI_PCIAMR0);
-	writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
-
-	writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
-}
-
-static int pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0) {
-#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
-		if      (dev->devfn == 0x00)
-			return IRQ_PCIINTA;
-		else if (dev->devfn == 0x08)
-			return IRQ_PCIINTB;
-		else if (dev->devfn == 0x10)
-			return IRQ_PCIINTC;
-		else if (dev->devfn == 0x18)
-			return IRQ_PCIINTD;
-#endif
-#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
-		if      (dev->devfn == 0x30)
-			return IRQ_PCIINTB;
-		else if (dev->devfn == 0x60)
-			return IRQ_PCIINTC;
-		else if (dev->devfn == 0x58)
-			return IRQ_PCIINTD;
-#endif
-#if	defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
-		/* only support 2 pci devices */
-		if      (dev->devfn == 0x00)
-			return IRQ_PCIINTC; /* sata */
-#endif
-	}
-	return -1;
-}
-
-/*
- * Only first 128MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init puv3_pci_adjust_zones(unsigned long max_zone_pfn)
-{
-	unsigned int sz = SZ_128M >> PAGE_SHIFT;
-
-	max_zone_pfn[ZONE_DMA] = sz;
-}
-
-/*
- * If the bus contains any of these devices, then we must not turn on
- * parity checking of any kind.
- */
-static inline int pdev_bad_for_parity(struct pci_dev *dev)
-{
-	return 0;
-}
-
-/*
- * pcibios_fixup_bus - Called after each bus is probed,
- * but before its children are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	u16 features = PCI_COMMAND_SERR
-		| PCI_COMMAND_PARITY
-		| PCI_COMMAND_FAST_BACK;
-
-	bus->resource[0] = &ioport_resource;
-	bus->resource[1] = &iomem_resource;
-
-	/*
-	 * Walk the devices on this bus, working out what we can
-	 * and can't support.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 status;
-
-		pci_read_config_word(dev, PCI_STATUS, &status);
-
-		/*
-		 * If any device on this bus does not support fast back
-		 * to back transfers, then the bus as a whole is not able
-		 * to support them.  Having fast back to back transfers
-		 * on saves us one PCI cycle per transaction.
-		 */
-		if (!(status & PCI_STATUS_FAST_BACK))
-			features &= ~PCI_COMMAND_FAST_BACK;
-
-		if (pdev_bad_for_parity(dev))
-			features &= ~(PCI_COMMAND_SERR
-					| PCI_COMMAND_PARITY);
-
-		switch (dev->class >> 8) {
-		case PCI_CLASS_BRIDGE_PCI:
-			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
-			status |= PCI_BRIDGE_CTL_PARITY
-				| PCI_BRIDGE_CTL_MASTER_ABORT;
-			status &= ~(PCI_BRIDGE_CTL_BUS_RESET
-				| PCI_BRIDGE_CTL_FAST_BACK);
-			pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
-			break;
-
-		case PCI_CLASS_BRIDGE_CARDBUS:
-			pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-					&status);
-			status |= PCI_CB_BRIDGE_CTL_PARITY
-				| PCI_CB_BRIDGE_CTL_MASTER_ABORT;
-			pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-					status);
-			break;
-		}
-	}
-
-	/*
-	 * Now walk the devices again, this time setting them up.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 cmd;
-
-		pci_read_config_word(dev, PCI_COMMAND, &cmd);
-		cmd |= features;
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-				      L1_CACHE_BYTES >> 2);
-	}
-
-	/*
-	 * Propagate the flags to the PCI bridge.
-	 */
-	if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		if (features & PCI_COMMAND_FAST_BACK)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
-		if (features & PCI_COMMAND_PARITY)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
-	}
-
-	/*
-	 * Report what we did for this bus
-	 */
-	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
-		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
-}
-EXPORT_SYMBOL(pcibios_fixup_bus);
-
-static struct resource busn_resource = {
-	.name	= "PCI busn",
-	.start	= 0,
-	.end	= 255,
-	.flags	= IORESOURCE_BUS,
-};
-
-static int __init pci_common_init(void)
-{
-	struct pci_bus *puv3_bus;
-	struct pci_host_bridge *bridge;
-	int ret;
-
-	bridge = pci_alloc_host_bridge(0);
-	if (!bridge)
-		return -ENOMEM;
-
-	pci_puv3_preinit();
-
-	pci_add_resource(&bridge->windows, &ioport_resource);
-	pci_add_resource(&bridge->windows, &iomem_resource);
-	pci_add_resource(&bridge->windows, &busn_resource);
-	bridge->sysdata = NULL;
-	bridge->busnr = 0;
-	bridge->ops = &pci_puv3_ops;
-	bridge->swizzle_irq = pci_common_swizzle;
-	bridge->map_irq = pci_puv3_map_irq;
-
-	/* Scan our single hose.  */
-	ret = pci_scan_root_bus_bridge(bridge);
-	if (ret) {
-		pci_free_host_bridge(bridge);
-		return;
-	}
-
-	puv3_bus = bridge->bus;
-
-	if (!puv3_bus)
-		panic("PCI: unable to scan bus!");
-
-	pci_bus_size_bridges(puv3_bus);
-	pci_bus_assign_resources(puv3_bus);
-	pci_bus_add_devices(puv3_bus);
-	return 0;
-}
-subsys_initcall(pci_common_init);
-
-char * __init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "debug")) {
-		debug_pci = 1;
-		return NULL;
-	}
-	return str;
-}
-
-void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-/*
- * From arch/i386/kernel/pci-i386.c:
- *
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might be mirrored at 0x0100-0x03ff..
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO && start & 0x300)
-		start = (start + 0x3ff) & ~0x3ff;
-
-	start = (start + align - 1) & ~(align - 1);
-
-	return start;
-}
-
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	/*
-	 * Bridges (eg, cardbus bridges) need to be fully enabled
-	 */
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
-		cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
-	if (cmd != old_cmd) {
-		printk("PCI: enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}