Merge tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 FRED support from Thomas Gleixner:
 "Support for x86 Fast Return and Event Delivery (FRED).

  FRED is a replacement for IDT event delivery on x86 and addresses most
  of the technical nightmares which IDT exposes:

   1) Exception cause registers like CR2 need to be manually preserved
      in nested exception scenarios.

   2) Hardware interrupt stack switching is suboptimal for nested
      exceptions as the interrupt stack mechanism rewinds the stack on
      each entry which requires a massive effort in the low level entry
      of #NMI code to handle this.

   3) No hardware distinction between entry from kernel or from user
      which makes establishing kernel context more complex than it needs
      to be especially for unconditionally nestable exceptions like NMI.

   4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
      is a problem when the perf NMI takes a fault when collecting a
      stack trace.

   5) Partial restore of ESP when returning to a 16-bit segment

   6) Limitation of the vector space which can cause vector exhaustion
      on large systems.

   7) Inability to differentiate NMI sources

  FRED addresses these shortcomings by:

   1) An extended exception stack frame which the CPU uses to save
      exception cause registers. This ensures that the meta information
      for each exception is preserved on stack and avoids the extra
      complexity of preserving it in software.

   2) Hardware interrupt stack switching is non-rewinding if a nested
      exception uses the currently interrupt stack.

   3) The entry points for kernel and user context are separate and GS
      BASE handling which is required to establish kernel context for
      per CPU variable access is done in hardware.

   4) NMIs are now nesting protected. They are only reenabled on the
      return from NMI.

   5) FRED guarantees full restore of ESP

   6) FRED does not put a limitation on the vector space by design
      because it uses a central entry points for kernel and user space
      and the CPUstores the entry type (exception, trap, interrupt,
      syscall) on the entry stack along with the vector number. The
      entry code has to demultiplex this information, but this removes
      the vector space restriction.

      The first hardware implementations will still have the current
      restricted vector space because lifting this limitation requires
      further changes to the local APIC.

   7) FRED stores the vector number and meta information on stack which
      allows having more than one NMI vector in future hardware when the
      required local APIC changes are in place.

  The series implements the initial FRED support by:

   - Reworking the existing entry and IDT handling infrastructure to
     accomodate for the alternative entry mechanism.

   - Expanding the stack frame to accomodate for the extra 16 bytes FRED
     requires to store context and meta information

   - Providing FRED specific C entry points for events which have
     information pushed to the extended stack frame, e.g. #PF and #DB.

   - Providing FRED specific C entry points for #NMI and #MCE

   - Implementing the FRED specific ASM entry points and the C code to
     demultiplex the events

   - Providing detection and initialization mechanisms and the necessary
     tweaks in context switching, GS BASE handling etc.

  The FRED integration aims for maximum code reuse vs the existing IDT
  implementation to the extent possible and the deviation in hot paths
  like context switching are handled with alternatives to minimalize the
  impact. The low level entry and exit paths are seperate due to the
  extended stack frame and the hardware based GS BASE swichting and
  therefore have no impact on IDT based systems.

  It has been extensively tested on existing systems and on the FRED
  simulation and as of now there are no outstanding problems"

* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  x86/fred: Fix init_task thread stack pointer initialization
  MAINTAINERS: Add a maintainer entry for FRED
  x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
  x86/fred: Invoke FRED initialization code to enable FRED
  x86/fred: Add FRED initialization functions
  x86/syscall: Split IDT syscall setup code into idt_syscall_init()
  KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
  x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
  x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
  x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
  x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
  x86/traps: Add sysvec_install() to install a system interrupt handler
  x86/fred: FRED entry/exit and dispatch code
  x86/fred: Add a machine check entry stub for FRED
  x86/fred: Add a NMI entry stub for FRED
  x86/fred: Add a debug fault entry stub for FRED
  x86/idtentry: Incorporate definitions/declarations of the FRED entries
  x86/fred: Make exc_page_fault() work for FRED
  x86/fred: Allow single-step trap and NMI when starting a new task
  x86/fred: No ESPFIX needed when FRED is enabled
  ...

1 files changed, 28 insertions, 10 deletions

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 087d21734286..c44e6f0c8972 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -61,6 +61,7 @@
 #include <asm/microcode.h>
 #include <asm/intel-family.h>
 #include <asm/cpu_device_id.h>
+#include <asm/fred.h>
 #include <asm/uv/uv.h>
 #include <asm/ia32.h>
 #include <asm/set_memory.h>
@@ -394,9 +395,8 @@ out:
 }
 
 /* These bits should not change their value after CPU init is finished. */
-static const unsigned long cr4_pinned_mask =
-	X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_UMIP |
-	X86_CR4_FSGSBASE | X86_CR4_CET;
+static const unsigned long cr4_pinned_mask = X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_UMIP |
+					     X86_CR4_FSGSBASE | X86_CR4_CET | X86_CR4_FRED;
 static DEFINE_STATIC_KEY_FALSE_RO(cr_pinning);
 static unsigned long cr4_pinned_bits __ro_after_init;
 
@@ -1976,10 +1976,8 @@ static void wrmsrl_cstar(unsigned long val)
 		wrmsrl(MSR_CSTAR, val);
 }
 
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
+static inline void idt_syscall_init(void)
 {
-	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
 	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
 
 	if (ia32_enabled()) {
@@ -2013,6 +2011,23 @@ void syscall_init(void)
 	       X86_EFLAGS_AC|X86_EFLAGS_ID);
 }
 
+/* May not be marked __init: used by software suspend */
+void syscall_init(void)
+{
+	/* The default user and kernel segments */
+	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
+
+	/*
+	 * Except the IA32_STAR MSR, there is NO need to setup SYSCALL and
+	 * SYSENTER MSRs for FRED, because FRED uses the ring 3 FRED
+	 * entrypoint for SYSCALL and SYSENTER, and ERETU is the only legit
+	 * instruction to return to ring 3 (both sysexit and sysret cause
+	 * #UD when FRED is enabled).
+	 */
+	if (!cpu_feature_enabled(X86_FEATURE_FRED))
+		idt_syscall_init();
+}
+
 #else	/* CONFIG_X86_64 */
 
 #ifdef CONFIG_STACKPROTECTOR
@@ -2116,8 +2131,9 @@ void cpu_init_exception_handling(void)
 	/* paranoid_entry() gets the CPU number from the GDT */
 	setup_getcpu(cpu);
 
-	/* IST vectors need TSS to be set up. */
-	tss_setup_ist(tss);
+	/* For IDT mode, IST vectors need to be set in TSS. */
+	if (!cpu_feature_enabled(X86_FEATURE_FRED))
+		tss_setup_ist(tss);
 	tss_setup_io_bitmap(tss);
 	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 
@@ -2126,8 +2142,10 @@ void cpu_init_exception_handling(void)
 	/* GHCB needs to be setup to handle #VC. */
 	setup_ghcb();
 
-	/* Finally load the IDT */
-	load_current_idt();
+	if (cpu_feature_enabled(X86_FEATURE_FRED))
+		cpu_init_fred_exceptions();
+	else
+		load_current_idt();
 }
 
 /*