Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Cross-arch changes to move the linker sections for NOTES and
     EXCEPTION_TABLE into the RO_DATA area, where they belong on most
     architectures. (Kees Cook)

   - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
     trap jumps into the middle of those padding areas instead of
     sliding execution. (Kees Cook)

   - A thorough cleanup of symbol definitions within x86 assembler code.
     The rather randomly named macros got streamlined around a
     (hopefully) straightforward naming scheme:

        SYM_START(name, linkage, align...)
        SYM_END(name, sym_type)

        SYM_FUNC_START(name)
        SYM_FUNC_END(name)

        SYM_CODE_START(name)
        SYM_CODE_END(name)

        SYM_DATA_START(name)
        SYM_DATA_END(name)

     etc - with about three times of these basic primitives with some
     label, local symbol or attribute variant, expressed via postfixes.

     No change in functionality intended. (Jiri Slaby)

   - Misc other changes, cleanups and smaller fixes"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  x86/entry/64: Remove pointless jump in paranoid_exit
  x86/entry/32: Remove unused resume_userspace label
  x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
  m68k: Convert missed RODATA to RO_DATA
  x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
  x86/mm: Report actual image regions in /proc/iomem
  x86/mm: Report which part of kernel image is freed
  x86/mm: Remove redundant address-of operators on addresses
  xtensa: Move EXCEPTION_TABLE to RO_DATA segment
  powerpc: Move EXCEPTION_TABLE to RO_DATA segment
  parisc: Move EXCEPTION_TABLE to RO_DATA segment
  microblaze: Move EXCEPTION_TABLE to RO_DATA segment
  ia64: Move EXCEPTION_TABLE to RO_DATA segment
  h8300: Move EXCEPTION_TABLE to RO_DATA segment
  c6x: Move EXCEPTION_TABLE to RO_DATA segment
  arm64: Move EXCEPTION_TABLE to RO_DATA segment
  alpha: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Actually use _etext for the end of the text segment
  vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
  ...

1 files changed, 31 insertions, 31 deletions

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 2e6a0676c1f4..3923ab4630d7 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -64,7 +64,7 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
  * can.
  */
 __HEAD
-ENTRY(startup_32)
+SYM_CODE_START(startup_32)
 	movl pa(initial_stack),%ecx
 	
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
@@ -156,7 +156,7 @@ ENTRY(startup_32)
 	jmp *%eax
 
 .Lbad_subarch:
-WEAK(xen_entry)
+SYM_INNER_LABEL_ALIGN(xen_entry, SYM_L_WEAK)
 	/* Unknown implementation; there's really
 	   nothing we can do at this point. */
 	ud2a
@@ -172,6 +172,7 @@ num_subarch_entries = (. - subarch_entries) / 4
 #else
 	jmp .Ldefault_entry
 #endif /* CONFIG_PARAVIRT */
+SYM_CODE_END(startup_32)
 
 #ifdef CONFIG_HOTPLUG_CPU
 /*
@@ -179,12 +180,12 @@ num_subarch_entries = (. - subarch_entries) / 4
  * up already except stack. We just set up stack here. Then call
  * start_secondary().
  */
-ENTRY(start_cpu0)
+SYM_FUNC_START(start_cpu0)
 	movl initial_stack, %ecx
 	movl %ecx, %esp
 	call *(initial_code)
 1:	jmp 1b
-ENDPROC(start_cpu0)
+SYM_FUNC_END(start_cpu0)
 #endif
 
 /*
@@ -195,7 +196,7 @@ ENDPROC(start_cpu0)
  * If cpu hotplug is not supported then this code can go in init section
  * which will be freed later
  */
-ENTRY(startup_32_smp)
+SYM_FUNC_START(startup_32_smp)
 	cld
 	movl $(__BOOT_DS),%eax
 	movl %eax,%ds
@@ -362,7 +363,7 @@ ENTRY(startup_32_smp)
 
 	call *(initial_code)
 1:	jmp 1b
-ENDPROC(startup_32_smp)
+SYM_FUNC_END(startup_32_smp)
 
 #include "verify_cpu.S"
 
@@ -392,7 +393,7 @@ setup_once:
 	andl $0,setup_once_ref	/* Once is enough, thanks */
 	ret
 
-ENTRY(early_idt_handler_array)
+SYM_FUNC_START(early_idt_handler_array)
 	# 36(%esp) %eflags
 	# 32(%esp) %cs
 	# 28(%esp) %eip
@@ -407,9 +408,9 @@ ENTRY(early_idt_handler_array)
 	i = i + 1
 	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
-ENDPROC(early_idt_handler_array)
+SYM_FUNC_END(early_idt_handler_array)
 	
-early_idt_handler_common:
+SYM_CODE_START_LOCAL(early_idt_handler_common)
 	/*
 	 * The stack is the hardware frame, an error code or zero, and the
 	 * vector number.
@@ -460,10 +461,10 @@ early_idt_handler_common:
 	decl	%ss:early_recursion_flag
 	addl	$4, %esp	/* pop pt_regs->orig_ax */
 	iret
-ENDPROC(early_idt_handler_common)
+SYM_CODE_END(early_idt_handler_common)
 
 /* This is the default interrupt "handler" :-) */
-ENTRY(early_ignore_irq)
+SYM_FUNC_START(early_ignore_irq)
 	cld
 #ifdef CONFIG_PRINTK
 	pushl %eax
@@ -498,19 +499,16 @@ ENTRY(early_ignore_irq)
 hlt_loop:
 	hlt
 	jmp hlt_loop
-ENDPROC(early_ignore_irq)
+SYM_FUNC_END(early_ignore_irq)
 
 __INITDATA
 	.align 4
-GLOBAL(early_recursion_flag)
-	.long 0
+SYM_DATA(early_recursion_flag, .long 0)
 
 __REFDATA
 	.align 4
-ENTRY(initial_code)
-	.long i386_start_kernel
-ENTRY(setup_once_ref)
-	.long setup_once
+SYM_DATA(initial_code,		.long i386_start_kernel)
+SYM_DATA(setup_once_ref,	.long setup_once)
 
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 #define	PGD_ALIGN	(2 * PAGE_SIZE)
@@ -553,7 +551,7 @@ EXPORT_SYMBOL(empty_zero_page)
 __PAGE_ALIGNED_DATA
 	/* Page-aligned for the benefit of paravirt? */
 	.align PGD_ALIGN
-ENTRY(initial_page_table)
+SYM_DATA_START(initial_page_table)
 	.long	pa(initial_pg_pmd+PGD_IDENT_ATTR),0	/* low identity map */
 # if KPMDS == 3
 	.long	pa(initial_pg_pmd+PGD_IDENT_ATTR),0
@@ -581,17 +579,18 @@ ENTRY(initial_page_table)
 	.fill 1024, 4, 0
 #endif
 
+SYM_DATA_END(initial_page_table)
 #endif
 
 .data
 .balign 4
-ENTRY(initial_stack)
-	/*
-	 * The SIZEOF_PTREGS gap is a convention which helps the in-kernel
-	 * unwinder reliably detect the end of the stack.
-	 */
-	.long init_thread_union + THREAD_SIZE - SIZEOF_PTREGS - \
-	      TOP_OF_KERNEL_STACK_PADDING;
+/*
+ * The SIZEOF_PTREGS gap is a convention which helps the in-kernel unwinder
+ * reliably detect the end of the stack.
+ */
+SYM_DATA(initial_stack,
+		.long init_thread_union + THREAD_SIZE -
+		SIZEOF_PTREGS - TOP_OF_KERNEL_STACK_PADDING)
 
 __INITRODATA
 int_msg:
@@ -607,27 +606,28 @@ int_msg:
  */
 
 	.data
-.globl boot_gdt_descr
-
 	ALIGN
 # early boot GDT descriptor (must use 1:1 address mapping)
 	.word 0				# 32 bit align gdt_desc.address
-boot_gdt_descr:
+SYM_DATA_START_LOCAL(boot_gdt_descr)
 	.word __BOOT_DS+7
 	.long boot_gdt - __PAGE_OFFSET
+SYM_DATA_END(boot_gdt_descr)
 
 # boot GDT descriptor (later on used by CPU#0):
 	.word 0				# 32 bit align gdt_desc.address
-ENTRY(early_gdt_descr)
+SYM_DATA_START(early_gdt_descr)
 	.word GDT_ENTRIES*8-1
 	.long gdt_page			/* Overwritten for secondary CPUs */
+SYM_DATA_END(early_gdt_descr)
 
 /*
  * The boot_gdt must mirror the equivalent in setup.S and is
  * used only for booting.
  */
 	.align L1_CACHE_BYTES
-ENTRY(boot_gdt)
+SYM_DATA_START(boot_gdt)
 	.fill GDT_ENTRY_BOOT_CS,8,0
 	.quad 0x00cf9a000000ffff	/* kernel 4GB code at 0x00000000 */
 	.quad 0x00cf92000000ffff	/* kernel 4GB data at 0x00000000 */
+SYM_DATA_END(boot_gdt)