summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-12-31 17:27:54 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-12-31 17:27:54 -0800
commit0922275ef157ba8ac93e7e7857087eb0442d5397 (patch)
treec7d5391df54d09f1ae652a73438d60293b3bebf4 /arch
parent495d714ad140e1732e66c45d0409054b24c1a0d6 (diff)
parentcac1fc8fb561ac766468394d49c3dd11a2b8cb44 (diff)
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms, but also a few more things: New SoC support this release: - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc) - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core Cleanups of various platforms: - OMAP1 ams-delta does some GPIO cleanups - Davinci removes of at24 platform data - Samsung cleans up old wakeup, PM debug and secondary core boot code - Renesas moves around config options and PM code to drivers/soc for sharing with 64-bit and more consistency - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups - SoCFPGA adds explicit selection of ARM errata and removes some unused code This also contains a few patches that I had queued up as fixes for 4.20 but didn't send in before the release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) arm64: dts: renesas: draak: Fix CVBS input ARM: omap2: avoid section mismatch warning ARM: tegra: avoid section mismatch warning ARM: ks8695: fix section mismatch warning ARM: pxa: avoid section mismatch warning ARM: mmp: fix pxa168_device_usb_phy use on aspenite ARM: mmp: fix timer_init calls ARM: OMAP1: fix USB configuration for device-only setups ARM: OMAP1: add MMC configuration for Palm Tungsten E ARM: imx: fix dependencies on imx7ulp ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER MAINTAINERS: add drivers/soc/amlogic/ to amlogic list ARM: imx: add initial support for imx7ulp ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed ARM: dts: Fix OMAP4430 SDP Ethernet startup ARM: dts: am335x-pdu001: Fix polarity of card detection input ARM: OMAP1: ams-delta: Fix audio permanently muted ARM: dts: omap5: Fix dual-role mode on Super-Speed port arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios ARM: davinci: da850-evm: remove unnecessary include ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig.debug78
-rw-r--r--arch/arm/boot/dts/am335x-pdu001.dts2
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts1
-rw-r--r--arch/arm/boot/dts/omap5-board-common.dtsi1
-rw-r--r--arch/arm/include/debug/brcmstb.S24
-rw-r--r--arch/arm/include/debug/stm32.S41
-rw-r--r--arch/arm/mach-bcm/Kconfig1
-rw-r--r--arch/arm/mach-bcm/board_bcm2835.c11
-rw-r--r--arch/arm/mach-bcm/platsmp.c10
-rw-r--r--arch/arm/mach-bcm/platsmp.h6
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c26
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c30
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c25
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c24
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c24
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c29
-rw-r--r--arch/arm/mach-exynos/common.h2
-rw-r--r--arch/arm/mach-exynos/platsmp.c26
-rw-r--r--arch/arm/mach-exynos/suspend.c37
-rw-r--r--arch/arm/mach-imx/Kconfig9
-rw-r--r--arch/arm/mach-imx/Makefile1
-rw-r--r--arch/arm/mach-imx/common.h1
-rw-r--r--arch/arm/mach-imx/cpu.c3
-rw-r--r--arch/arm/mach-imx/mach-imx7ulp.c31
-rw-r--r--arch/arm/mach-imx/mxc.h1
-rw-r--r--arch/arm/mach-imx/pm-imx7ulp.c29
-rw-r--r--arch/arm/mach-ks8695/board-acs5k.c2
-rw-r--r--arch/arm/mach-meson/Kconfig2
-rw-r--r--arch/arm/mach-mmp/aspenite.c7
-rw-r--r--arch/arm/mach-mmp/common.h2
-rw-r--r--arch/arm/mach-mmp/devices.c21
-rw-r--r--arch/arm/mach-mmp/mmp2-dt.c2
-rw-r--r--arch/arm/mach-mmp/mmp2.c2
-rw-r--r--arch/arm/mach-mmp/pxa168.c2
-rw-r--r--arch/arm/mach-mmp/pxa910.c2
-rw-r--r--arch/arm/mach-mmp/pxa910.h1
-rw-r--r--arch/arm/mach-mmp/time.c32
-rw-r--r--arch/arm/mach-mmp/ttc_dkb.c6
-rw-r--r--arch/arm/mach-omap1/Makefile2
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S2
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq.c3
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c112
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.h (renamed from arch/arm/mach-omap1/include/mach/board-ams-delta.h)24
-rw-r--r--arch/arm/mach-omap1/board-palmte.c29
-rw-r--r--arch/arm/mach-omap1/clock.c14
-rw-r--r--arch/arm/mach-omap1/devices.c3
-rw-r--r--arch/arm/mach-omap1/id.c6
-rw-r--r--arch/arm/mach-omap1/include/mach/usb.h2
-rw-r--r--arch/arm/mach-omap1/pm.c13
-rw-r--r--arch/arm/mach-omap2/id.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c6
-rw-r--r--arch/arm/mach-omap2/pm33xx-core.c2
-rw-r--r--arch/arm/mach-omap2/timer.c1
-rw-r--r--arch/arm/mach-pxa/cm-x300.c2
-rw-r--r--arch/arm/mach-pxa/littleton.c2
-rw-r--r--arch/arm/mach-pxa/zeus.c2
-rw-r--r--arch/arm/mach-s5pv210/common.h1
-rw-r--r--arch/arm/mach-s5pv210/pm.c16
-rw-r--r--arch/arm/mach-shmobile/Kconfig129
-rw-r--r--arch/arm/mach-shmobile/Makefile1
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c353
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.h22
-rw-r--r--arch/arm/mach-shmobile/smp-sh73a0.c1
-rw-r--r--arch/arm/mach-socfpga/Kconfig7
-rw-r--r--arch/arm/mach-socfpga/core.h2
-rw-r--r--arch/arm/mach-socfpga/socfpga.c2
-rw-r--r--arch/arm/mach-sunxi/Kconfig19
-rw-r--r--arch/arm/mach-sunxi/sunxi.c9
-rw-r--r--arch/arm/mach-tegra/irq.c4
-rw-r--r--arch/arm/plat-samsung/Kconfig1
-rw-r--r--arch/arm64/Kconfig.platforms60
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995-draak.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts20
73 files changed, 580 insertions, 852 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d6a49f59ecd9..6d6e0330930b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1087,14 +1087,21 @@ choice
Say Y here if you want kernel low-level debugging support
on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
- config DEBUG_SOCFPGA_UART1
+ config DEBUG_SOCFPGA_ARRIA10_UART1
depends on ARCH_SOCFPGA
- bool "Use SOCFPGA UART1 for low-level debug"
+ bool "Use SOCFPGA Arria10 UART1 for low-level debug"
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
on SOCFPGA(Arria 10) based platforms.
+ config DEBUG_SOCFPGA_CYCLONE5_UART1
+ depends on ARCH_SOCFPGA
+ bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
config DEBUG_SUN9I_UART0
bool "Kernel low-level debugging messages via sun9i UART0"
@@ -1192,6 +1199,28 @@ choice
If unsure, say N.
+ config STM32F4_DEBUG_UART
+ bool "Use STM32F4 UART for low-level debug"
+ depends on ARCH_STM32
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32F4 based platforms, which default UART is wired on
+ USART1.
+
+ If unsure, say N.
+
+ config STM32F7_DEBUG_UART
+ bool "Use STM32F7 UART for low-level debug"
+ depends on ARCH_STM32
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32F7 based platforms, which default UART is wired on
+ USART1.
+
+ If unsure, say N.
+
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
@@ -1440,21 +1469,21 @@ config DEBUG_OMAP2PLUS_UART
depends on ARCH_OMAP2PLUS
config DEBUG_IMX_UART_PORT
- int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
- DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
- DEBUG_IMX31_UART || \
- DEBUG_IMX35_UART || \
- DEBUG_IMX50_UART || \
- DEBUG_IMX51_UART || \
- DEBUG_IMX53_UART || \
- DEBUG_IMX6Q_UART || \
- DEBUG_IMX6SL_UART || \
- DEBUG_IMX6SX_UART || \
- DEBUG_IMX6UL_UART || \
- DEBUG_IMX7D_UART
+ int "i.MX Debug UART Port Selection"
+ depends on DEBUG_IMX1_UART || \
+ DEBUG_IMX25_UART || \
+ DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX31_UART || \
+ DEBUG_IMX35_UART || \
+ DEBUG_IMX50_UART || \
+ DEBUG_IMX51_UART || \
+ DEBUG_IMX53_UART || \
+ DEBUG_IMX6Q_UART || \
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART || \
+ DEBUG_IMX6UL_UART || \
+ DEBUG_IMX7D_UART
default 1
- depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
@@ -1476,6 +1505,10 @@ config DEBUG_STI_UART
bool
depends on ARCH_STI
+config DEBUG_STM32_UART
+ bool
+ depends on ARCH_STM32
+
config DEBUG_SIRFSOC_UART
bool
depends on ARCH_SIRF
@@ -1525,6 +1558,7 @@ config DEBUG_LL_INCLUDE
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFSOC_UART
default "debug/sti.S" if DEBUG_STI_UART
+ default "debug/stm32.S" if DEBUG_STM32_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/ux500.S" if DEBUG_UX500_UART
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
@@ -1655,7 +1689,8 @@ config DEBUG_UART_PHYS
default 0xfe800000 if ARCH_IOP32X
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART0
- default 0xffc02100 if DEBUG_SOCFPGA_UART1
+ default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+ default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
default 0xffd82340 if ARCH_IOP13XX
default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
@@ -1762,7 +1797,8 @@ config DEBUG_UART_VIRT
default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
default 0xfeb31000 if DEBUG_KEYSTONE_UART1
default 0xfec02000 if DEBUG_SOCFPGA_UART0
- default 0xfec02100 if DEBUG_SOCFPGA_UART1
+ default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+ default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU
default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
@@ -1811,9 +1847,9 @@ config DEBUG_UART_8250_WORD
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
depends on DEBUG_UART_8250_SHIFT >= 2
default y if DEBUG_PICOXCELL_UART || \
- DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \
- DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
- DEBUG_ALPINE_UART0 || \
+ DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+ DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
+ DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index 6dd9d487aaeb..ae43d61f4e8b 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -585,7 +585,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
&sham {
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 490726b52216..9dc7ec7655cb 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -33,6 +33,7 @@
gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
enable-active-high;
regulator-boot-on;
+ startup-delay-us = <25000>;
};
vbat: fixedregulator-vbat {
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index bf7ca00f4c21..bc853ebeda22 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -701,6 +701,7 @@
};
&dwc3 {
+ extcon = <&extcon_usb3>;
dr_mode = "otg";
};
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 0f580caa81e5..bf8702ee8f86 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -26,8 +26,9 @@
#define UARTA_3390 REG_PHYS_ADDR(0x40a900)
#define UARTA_7250 REG_PHYS_ADDR(0x40b400)
-#define UARTA_7260 REG_PHYS_ADDR(0x40c000)
-#define UARTA_7268 UARTA_7260
+#define UARTA_7255 REG_PHYS_ADDR(0x40c000)
+#define UARTA_7260 UARTA_7255
+#define UARTA_7268 UARTA_7255
#define UARTA_7271 UARTA_7268
#define UARTA_7278 REG_PHYS_ADDR_V7(0x40c000)
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
@@ -82,15 +83,16 @@ ARM_BE8( rev \rv, \rv )
/* Chip specific detection starts here */
20: checkuart(\rp, \rv, 0x33900000, 3390)
21: checkuart(\rp, \rv, 0x72500000, 7250)
-22: checkuart(\rp, \rv, 0x72600000, 7260)
-23: checkuart(\rp, \rv, 0x72680000, 7268)
-24: checkuart(\rp, \rv, 0x72710000, 7271)
-25: checkuart(\rp, \rv, 0x73640000, 7364)
-26: checkuart(\rp, \rv, 0x73660000, 7366)
-27: checkuart(\rp, \rv, 0x07437100, 74371)
-28: checkuart(\rp, \rv, 0x74390000, 7439)
-29: checkuart(\rp, \rv, 0x74450000, 7445)
-30: checkuart(\rp, \rv, 0x72780000, 7278)
+22: checkuart(\rp, \rv, 0x72550000, 7255)
+23: checkuart(\rp, \rv, 0x72600000, 7260)
+24: checkuart(\rp, \rv, 0x72680000, 7268)
+25: checkuart(\rp, \rv, 0x72710000, 7271)
+26: checkuart(\rp, \rv, 0x72780000, 7278)
+27: checkuart(\rp, \rv, 0x73640000, 7364)
+28: checkuart(\rp, \rv, 0x73660000, 7366)
+29: checkuart(\rp, \rv, 0x07437100, 74371)
+30: checkuart(\rp, \rv, 0x74390000, 7439)
+31: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
new file mode 100644
index 000000000000..1abb32f685fd
--- /dev/null
+++ b/arch/arm/include/debug/stm32.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics SA 2017 - All Rights Reserved
+ * Author: Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
+ */
+
+#define STM32_UART_BASE 0x40011000 /* USART1 */
+
+#ifdef CONFIG_STM32F4_DEBUG_UART
+#define STM32_USART_SR_OFF 0x00
+#define STM32_USART_TDR_OFF 0x04
+#endif
+
+#ifdef CONFIG_STM32F7_DEBUG_UART
+#define STM32_USART_SR_OFF 0x1C
+#define STM32_USART_TDR_OFF 0x28
+#endif
+
+#define STM32_USART_TC (1 << 6) /* Tx complete */
+#define STM32_USART_TXE (1 << 7) /* Tx data reg empty */
+
+.macro addruart, rp, rv, tmp
+ ldr \rp, =STM32_UART_BASE @ physical base
+ ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */
+.endm
+
+.macro senduart,rd,rx
+ strb \rd, [\rx, #STM32_USART_TDR_OFF]
+.endm
+
+.macro waituart,rd,rx
+1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register
+ tst \rd, #STM32_USART_TXE @ TXE = 1 = tx empty
+ beq 1001b
+.endm
+
+.macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register
+ tst \rd, #STM32_USART_TC @ TC = 1 = tx complete
+ beq 1001b
+.endm
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a3f375af673d..a067adf9f1ee 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -189,6 +189,7 @@ config ARCH_BCM_63XX
bool "Broadcom BCM63xx DSL SoC"
depends on ARCH_MULTI_V7
depends on MMU
+ select ARCH_HAS_RESET_CONTROLLER
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 8cff865ace04..bfc556f76720 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/init.h>
diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c
index 7d954830eb57..47f8053d0240 100644
--- a/arch/arm/mach-bcm/platsmp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014-2015 Broadcom Corporation
* Copyright 2014 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/cpumask.h>
diff --git a/arch/arm/mach-bcm/platsmp.h b/arch/arm/mach-bcm/platsmp.h
index b8b8b3fa350d..e65bffad1d23 100644
--- a/arch/arm/mach-bcm/platsmp.h
+++ b/arch/arm/mach-bcm/platsmp.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
*/
extern const struct smp_operations bcm2836_smp_ops;
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 7d8ab36ff83d..e52ec1619b70 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -30,6 +30,7 @@
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/ti-aemif.h>
#include <linux/regulator/machine.h>
+#include <linux/nvmem-provider.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -435,6 +436,27 @@ static inline void da830_evm_init_lcdc(int mux_mode)
static inline void da830_evm_init_lcdc(int mux_mode) { }
#endif
+static struct nvmem_cell_info da830_evm_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x7f00,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table da830_evm_nvmem_cell_table = {
+ .nvmem_name = "1-00500",
+ .cells = da830_evm_nvmem_cells,
+ .ncells = ARRAY_SIZE(da830_evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
+ .nvmem_name = "1-00500",
+ .cell_name = "macaddr",
+ .dev_id = "davinci_emac.1",
+ .con_id = "mac-address",
+};
+
static struct at24_platform_data da830_evm_i2c_eeprom_info = {
.byte_len = SZ_256K / 8,
.page_size = 64,
@@ -620,6 +642,10 @@ static __init void da830_evm_init(void)
__func__, ret);
davinci_serial_init(da8xx_serial_device);
+
+ nvmem_add_cell_table(&da830_evm_nvmem_cell_table);
+ nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1);
+
i2c_register_board_info(1, da830_evm_i2c_devices,
ARRAY_SIZE(da830_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e1a949b47306..6a29baf0a289 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
#include <linux/platform_data/pca953x.h>
#include <linux/input.h>
#include <linux/input/tps6507x-ts.h>
@@ -28,6 +27,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
+#include <linux/nvmem-provider.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-davinci.h>
@@ -100,6 +100,31 @@ static struct mtd_partition da850evm_spiflash_part[] = {
},
};
+static struct nvmem_cell_info da850evm_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x0,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table da850evm_nvmem_cell_table = {
+ /*
+ * The nvmem name differs from the partition name because of the
+ * internal works of the nvmem framework.
+ */
+ .nvmem_name = "MAC-Address0",
+ .cells = da850evm_nvmem_cells,
+ .ncells = ARRAY_SIZE(da850evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = {
+ .nvmem_name = "MAC-Address0",
+ .cell_name = "macaddr",
+ .dev_id = "davinci_emac.1",
+ .con_id = "mac-address",
+};
+
static struct flash_platform_data da850evm_spiflash_data = {
.name = "m25p80",
.parts = da850evm_spiflash_part,
@@ -1395,6 +1420,9 @@ static __init void da850_evm_init(void)
davinci_serial_init(da8xx_serial_device);
+ nvmem_add_cell_table(&da850evm_nvmem_cell_table);
+ nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1);
+
i2c_register_board_info(1, da850_evm_i2c_devices,
ARRAY_SIZE(da850_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 09e439d4abf5..e3b0b701e395 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -24,6 +24,7 @@
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/mtd/rawnand.h>
+#include <linux/nvmem-provider.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
@@ -203,6 +204,27 @@ static struct platform_device davinci_aemif_device = {
.num_resources = ARRAY_SIZE(davinci_aemif_resources),
};
+static struct nvmem_cell_info davinci_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x7f00,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table davinci_nvmem_cell_table = {
+ .nvmem_name = "1-00500",
+ .cells = davinci_nvmem_cells,
+ .ncells = ARRAY_SIZE(davinci_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
+ .nvmem_name = "1-00500",
+ .cell_name = "macaddr",
+ .dev_id = "davinci_emac.1",
+ .con_id = "mac-address",
+};
+
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
@@ -781,6 +803,9 @@ static __init void dm365_evm_init(void)
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+ nvmem_add_cell_table(&davinci_nvmem_cell_table);
+ nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
+
evm_init_i2c();
davinci_serial_init(dm365_serial_device);
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index e4a8f9225d16..e1428115067f 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -22,6 +22,7 @@
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/nvmem-provider.h>
#include <linux/phy.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
@@ -510,6 +511,27 @@ static struct pcf857x_platform_data pcf_data_u35 = {
* - ... newer boards may have more
*/
+static struct nvmem_cell_info dm644evm_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x7f00,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table dm644evm_nvmem_cell_table = {
+ .nvmem_name = "1-00500",
+ .cells = dm644evm_nvmem_cells,
+ .ncells = ARRAY_SIZE(dm644evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
+ .nvmem_name = "1-00500",
+ .cell_name = "macaddr",
+ .dev_id = "davinci_emac.1",
+ .con_id = "mac-address",
+};
+
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
@@ -842,6 +864,8 @@ static __init void davinci_evm_init(void)
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
#ifdef CONFIG_I2C
+ nvmem_add_cell_table(&dm644evm_nvmem_cell_table);
+ nvmem_add_cell_lookups(&dm644evm_nvmem_cell_lookup, 1);
evm_init_i2c();
davinci_setup_mmc(0, &dm6446evm_mmc_config);
#endif
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 3e5ee09ee717..8d5be6dd2019 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -32,6 +32,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
+#include <linux/nvmem-provider.h>
#include <linux/clk.h>
#include <linux/export.h>
#include <linux/platform_data/gpio-davinci.h>
@@ -342,6 +343,27 @@ static struct pcf857x_platform_data pcf_data = {
* - ... newer boards may have more
*/
+static struct nvmem_cell_info dm646x_evm_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x7f00,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table dm646x_evm_nvmem_cell_table = {
+ .nvmem_name = "1-00500",
+ .cells = dm646x_evm_nvmem_cells,
+ .ncells = ARRAY_SIZE(dm646x_evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
+ .nvmem_name = "1-00500",
+ .cell_name = "macaddr",
+ .dev_id = "davinci_emac.1",
+ .con_id = "mac-address",
+};
+
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
@@ -815,6 +837,8 @@ static __init void evm_init(void)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
#ifdef CONFIG_I2C
+ nvmem_add_cell_table(&dm646x_evm_nvmem_cell_table);
+ nvmem_add_cell_lookups(&dm646x_evm_nvmem_cell_lookup, 1);
evm_init_i2c();
#endif
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2933e0c87cfa..8df16e81b69e 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -15,6 +15,7 @@
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
+#include <linux/nvmem-provider.h>
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
#include <linux/platform_data/at24.h>
@@ -161,6 +162,31 @@ bad_config:
mityomapl138_cpufreq_init(partnum);
}
+/*
+ * We don't define a cell for factory config as it will be accessed from the
+ * board file using the nvmem notifier chain.
+ */
+static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x64,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
+ .nvmem_name = "1-00500",
+ .cells = mityomapl138_nvmem_cells,
+ .ncells = ARRAY_SIZE(mityomapl138_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
+ .nvmem_name = "1-00500",
+ .cell_name = "macaddr",
+ .dev_id = "davinci_emac.1",
+ .con_id = "mac-address",
+};
+
static struct at24_platform_data mityomapl138_fd_chip = {
.byte_len = 256,
.page_size = 8,
@@ -543,6 +569,9 @@ static void __init mityomapl138_init(void)
davinci_serial_init(da8xx_serial_device);
+ nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
+ nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
+
ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
if (ret)
pr_warn("i2c0 registration failed: %d\n", ret);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f96730cce6e8..1b8699e94098 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -114,8 +114,6 @@ bool __init exynos_secure_firmware_available(void);
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
-extern u32 exynos_get_eint_wake_mask(void);
-
#ifdef CONFIG_PM_SLEEP
extern void __init exynos_pm_init(void);
#else
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 6a1e682371b3..c39ffd2e2fe6 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -397,38 +397,12 @@ fail:
static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
exynos_sysram_init();
exynos_set_delayed_reset_assertion(true);
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_scu_enable();
-
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The boot monitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- *
- * Try using firmware operation first and fall back to
- * boot register if it fails.
- */
- for (i = 1; i < max_cpus; ++i) {
- unsigned long boot_addr;
- u32 mpidr;
- u32 core_id;
- int ret;
-
- mpidr = cpu_logical_map(i);
- core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- boot_addr = __pa_symbol(exynos4_secondary_startup);
-
- ret = exynos_set_boot_addr(core_id, boot_addr);
- if (ret)
- break;
- }
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index bb8e3985acdb..0850505ac78b 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -30,8 +30,6 @@
#include <asm/smp_scu.h>
#include <asm/suspend.h>
-#include <plat/pm-common.h>
-
#include "common.h"
#define REG_TABLE_END (-1U)
@@ -93,6 +91,11 @@ static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
{ /* sentinel */ },
};
+static u32 exynos_read_eint_wakeup_mask(void)
+{
+ return pmu_raw_readl(EXYNOS_EINT_WAKEUP_MASK);
+}
+
static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
{
const struct exynos_wkup_irq *wkup_irq;
@@ -277,8 +280,10 @@ static int exynos5420_cpu_suspend(unsigned long arg)
static void exynos_pm_set_wakeup_mask(void)
{
- /* Set wake-up mask registers */
- pmu_raw_writel(exynos_get_eint_wake_mask(), EXYNOS_EINT_WAKEUP_MASK);
+ /*
+ * Set wake-up mask registers
+ * EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
+ */
pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
}
@@ -488,27 +493,24 @@ early_wakeup:
static int exynos_suspend_enter(suspend_state_t state)
{
+ u32 eint_wakeup_mask = exynos_read_eint_wakeup_mask();
int ret;
- s3c_pm_debug_init();
-
- S3C_PMDBG("%s: suspending the system...\n", __func__);
+ pr_debug("%s: suspending the system...\n", __func__);
- S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
- exynos_irqwake_intmask, exynos_get_eint_wake_mask());
+ pr_debug("%s: wakeup masks: %08x,%08x\n", __func__,
+ exynos_irqwake_intmask, eint_wakeup_mask);
if (exynos_irqwake_intmask == -1U
- && exynos_get_eint_wake_mask() == -1U) {
+ && eint_wakeup_mask == EXYNOS_EINT_WAKEUP_MASK_DISABLED) {
pr_err("%s: No wake-up sources!\n", __func__);
pr_err("%s: Aborting sleep\n", __func__);
return -EINVAL;
}
- s3c_pm_save_uarts();
if (pm_data->pm_prepare)
pm_data->pm_prepare();
flush_cache_all();
- s3c_pm_check_store();
ret = call_firmware_op(suspend);
if (ret == -ENOSYS)
@@ -518,14 +520,11 @@ static int exynos_suspend_enter(suspend_state_t state)
if (pm_data->pm_resume_prepare)
pm_data->pm_resume_prepare();
- s3c_pm_restore_uarts();
- S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
+ pr_debug("%s: wakeup stat: %08x\n", __func__,
pmu_raw_readl(S5P_WAKEUP_STAT));
- s3c_pm_check_restore();
-
- S3C_PMDBG("%s: resuming the system...\n", __func__);
+ pr_debug("%s: resuming the system...\n", __func__);
return 0;
}
@@ -548,8 +547,6 @@ static int exynos_suspend_prepare(void)
return ret;
}
- s3c_pm_check_prepare();
-
return 0;
}
@@ -557,8 +554,6 @@ static void exynos_suspend_finish(void)
{
int ret;
- s3c_pm_check_cleanup();
-
ret = regulator_suspend_finish();
if (ret)
pr_warn("Failed to resume regulators from suspend (%d)\n", ret);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index abc337111eff..9b8d4d6aa763 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -558,6 +558,15 @@ config SOC_IMX7D
help
This enables support for Freescale i.MX7 Dual processor.
+config SOC_IMX7ULP
+ bool "i.MX7ULP support"
+ select CLKSRC_IMX_TPM
+ select PINCTRL_IMX7ULP
+ select SOC_IMX7D_CA7 if ARCH_MULTI_V7
+ select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
+ help
+ This enables support for Freescale i.MX7 Ultra Low Power processor.
+
config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index bae179af21f6..8af2f7e91d13 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o
obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o
obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o
+obj-$(CONFIG_SOC_IMX7ULP) += mach-imx7ulp.o pm-imx7ulp.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 423dd76bb6b8..bc915e5b4d56 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -120,6 +120,7 @@ void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
void imx6sx_pm_init(void);
void imx6ul_pm_init(void);
+void imx7ulp_pm_init(void);
#ifdef CONFIG_PM
void imx51_pm_init(void);
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index c73593e09121..0b137eeffb61 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -145,6 +145,9 @@ struct device * __init imx_soc_device_init(void)
case MXC_CPU_IMX7D:
soc_id = "i.MX7D";
break;
+ case MXC_CPU_IMX7ULP:
+ soc_id = "i.MX7ULP";
+ break;
default:
soc_id = "Unknown";
}
diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c
new file mode 100644
index 000000000000..33937ebf66b5
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx7ulp.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "hardware.h"
+
+static void __init imx7ulp_init_machine(void)
+{
+ imx7ulp_pm_init();
+
+ mxc_set_cpu_type(MXC_CPU_IMX7ULP);
+ of_platform_default_populate(NULL, NULL, imx_soc_device_init());
+}
+
+static const char *const imx7ulp_dt_compat[] __initconst = {
+ "fsl,imx7ulp",
+ NULL,
+};
+
+DT_MACHINE_START(IMX7ulp, "Freescale i.MX7ULP (Device Tree)")
+ .init_machine = imx7ulp_init_machine,
+ .dt_compat = imx7ulp_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index b130a53ff62a..8e72d4e080af 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -44,6 +44,7 @@
#define MXC_CPU_IMX6ULZ 0x6b
#define MXC_CPU_IMX6SLL 0x67
#define MXC_CPU_IMX7D 0x72
+#define MXC_CPU_IMX7ULP 0xff
#define IMX_DDR_TYPE_LPDDR2 1
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
new file mode 100644
index 000000000000..cf6a380c2b8d
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define SMC_PMCTRL 0x10
+#define BP_PMCTRL_PSTOPO 16
+#define PSTOPO_PSTOP3 0x3
+
+void __init imx7ulp_pm_init(void)
+{
+ struct device_node *np;
+ void __iomem *smc1_base;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
+ smc1_base = of_iomap(np, 0);
+ WARN_ON(!smc1_base);
+
+ /* Partial Stop mode 3 with system/bus clock enabled */
+ writel_relaxed(PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO,
+ smc1_base + SMC_PMCTRL);
+ iounmap(smc1_base);
+}
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index ef835d82cdb9..5783062224c3 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -100,7 +100,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
},
};
-static void acs5k_i2c_init(void)
+static void __init acs5k_i2c_init(void)
{
/* The gpio interface */
gpiod_add_lookup_table(&acs5k_i2c_gpiod_table);
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index d51cfda953d4..b16831697183 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -4,12 +4,14 @@ menuconfig ARCH_MESON
select GPIOLIB
select GENERIC_IRQ_CHIP
select ARM_GIC
+ select ARM_GLOBAL_TIMER
select CACHE_L2X0
select PINCTRL
select PINCTRL_MESON
select COMMON_CLK
select COMMON_CLK_AMLOGIC
select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
if ARCH_MESON
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 6c2ebf01893a..75b2d7db643e 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -29,6 +29,7 @@
#include "addr-map.h"
#include "mfp-pxa168.h"
#include "pxa168.h"
+#include "pxa910.h"
#include "irqs.h"
#include "common.h"
@@ -256,9 +257,15 @@ static void __init common_init(void)
/* off-chip devices */
platform_device_register(&smc91x_device);
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+ platform_device_register(&pxa168_device_usb_phy);
+#endif
+
#if IS_ENABLED(CONFIG_USB_EHCI_MV)
pxa168_add_usb_host(&pxa168_sph_pdata);
#endif
+#endif
}
MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 7e284d9c429f..483b8b6d3005 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -2,7 +2,7 @@
#include <linux/reboot.h>
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-extern void timer_init(int irq);
+extern void mmp_timer_init(int irq, unsigned long rate);
extern void __init mmp_map_io(void);
extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 0fca63c80e1a..822b8be042b9 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -240,6 +240,27 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
#if IS_ENABLED(CONFIG_USB_SUPPORT)
static u64 __maybe_unused usb_dma_mask = ~(u32)0;
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+struct resource pxa168_usb_phy_resources[] = {
+ [0] = {
+ .start = PXA168_U2O_PHYBASE,
+ .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa168_device_usb_phy = {
+ .name = "pxa-usb-phy",
+ .id = -1,
+ .resource = pxa168_usb_phy_resources,
+ .num_resources = ARRAY_SIZE(pxa168_usb_phy_resources),
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ }
+};
+#endif /* CONFIG_PHY_PXA_USB */
+
#if IS_ENABLED(CONFIG_USB_MV_UDC)
struct resource pxa168_u2o_resources[] = {
/* regbase */
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 0341359b24a4..50c5e8b5be3d 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -26,8 +26,8 @@ static void __init mmp_init_time(void)
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
- mmp_dt_init_timer();
of_clk_init(NULL);
+ mmp_dt_init_timer();
}
static const char *const mmp2_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index afba5460cdaf..726c1a642dea 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -134,7 +134,7 @@ void __init mmp2_timer_init(void)
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_TIMERS);
- timer_init(IRQ_MMP2_TIMER1);
+ mmp_timer_init(IRQ_MMP2_TIMER1, 6500000);
}
/* on-chip devices */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 0f5f16fb8c66..cdcf65ace3f9 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -79,7 +79,7 @@ void __init pxa168_timer_init(void)
/* 3.25MHz, bus/functional clock enabled, release reset */
__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
- timer_init(IRQ_PXA168_TIMER1);
+ mmp_timer_init(IRQ_PXA168_TIMER1, 3250000);
}
void pxa168_clear_keypad_wakeup(void)
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 1ccbba9ac495..d30a7d12bc98 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -116,7 +116,7 @@ void __init pxa910_timer_init(void)
__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
- timer_init(IRQ_PXA910_AP1_TIMER1);
+ mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
}
/* on-chip devices */
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
index 42009c349eae..2dfe38e4acc1 100644
--- a/arch/arm/mach-mmp/pxa910.h
+++ b/arch/arm/mach-mmp/pxa910.h
@@ -22,6 +22,7 @@ extern struct pxa_device_desc pxa910_device_pwm2;
extern struct pxa_device_desc pxa910_device_pwm3;
extern struct pxa_device_desc pxa910_device_pwm4;
extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa168_device_usb_phy;
extern struct platform_device pxa168_device_u2o;
extern struct platform_device pxa168_device_u2ootg;
extern struct platform_device pxa168_device_u2oehci;
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 96ad1db0b04b..f9c295154b94 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -38,12 +39,6 @@
#include "cputype.h"
#include "clock.h"
-#ifdef CONFIG_CPU_MMP2
-#define MMP_CLOCK_FREQ 6500000
-#else
-#define MMP_CLOCK_FREQ 3250000
-#endif
-
#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
#define MAX_DELTA (0xfffffffe)
@@ -189,19 +184,18 @@ static struct irqaction timer_irq = {
.dev_id = &ckevt,
};
-void __init timer_init(int irq)
+void __init mmp_timer_init(int irq, unsigned long rate)
{
timer_config();
- sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
+ sched_clock_register(mmp_read_sched_clock, 32, rate);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
- clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
- clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
- MIN_DELTA, MAX_DELTA);
+ clocksource_register_hz(&cksrc, rate);
+ clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
}
#ifdef CONFIG_OF
@@ -213,7 +207,9 @@ static const struct of_device_id mmp_timer_dt_ids[] = {
void __init mmp_dt_init_timer(void)
{
struct device_node *np;
+ struct clk *clk;
int irq, ret;
+ unsigned long rate;
np = of_find_matching_node(NULL, mmp_timer_dt_ids);
if (!np) {
@@ -221,6 +217,18 @@ void __init mmp_dt_init_timer(void)
goto out;
}
+ clk = of_clk_get(np, 0);
+ if (!IS_ERR(clk)) {
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto out;
+ rate = clk_get_rate(clk) / 2;
+ } else if (cpu_is_pj4()) {
+ rate = 6500000;
+ } else {
+ rate = 3250000;
+ }
+
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
ret = -EINVAL;
@@ -231,7 +239,7 @@ void __init mmp_dt_init_timer(void)
ret = -ENOMEM;
goto out;
}
- timer_init(irq);
+ mmp_timer_init(irq, rate);
return;
out:
pr_err("Failed to get timer from device tree with error:%d\n", ret);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index c7897fb2b6da..09b53ace08ac 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -282,6 +282,11 @@ static void __init ttc_dkb_init(void)
sizeof(struct pxa_gpio_platform_data));
platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+ platform_device_register(&pxa168_device_usb_phy);
+#endif
+
#if IS_ENABLED(CONFIG_USB_MV_UDC)
pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
platform_device_register(&pxa168_device_u2o);
@@ -296,6 +301,7 @@ static void __init ttc_dkb_init(void)
pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
platform_device_register(&pxa168_device_u2ootg);
#endif
+#endif
#if IS_ENABLED(CONFIG_MMP_DISP)
add_disp();
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index a7e9c6d19fb5..c757a52d0801 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -25,7 +25,7 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
led-y := leds.o
-usb-fs-$(CONFIG_USB) := usb.o
+usb-fs-$(CONFIG_USB_SUPPORT) := usb.o
obj-y += $(usb-fs-m) $(usb-fs-y)
# Specific board support
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index e3faa0274b56..7c9fb7fe0070 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -18,9 +18,9 @@
#include <linux/platform_data/gpio-omap.h>
#include <asm/assembler.h>
-#include <mach/board-ams-delta.h>
#include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
#include "iomap.h"
#include "soc.h"
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 0324d0f209ea..51212133ce06 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -22,11 +22,10 @@
#include <linux/platform_data/ams-delta-fiq.h>
#include <linux/platform_device.h>
-#include <mach/board-ams-delta.h>
-
#include <asm/fiq.h>
#include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
static struct fiq_handler fh = {
.name = "ams-delta-fiq"
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 49e3adffbf5b..c4c0a8ea11e4 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -36,7 +36,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/board-ams-delta.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/mux.h>
@@ -45,6 +44,7 @@
#include <mach/usb.h>
#include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
#include "iomap.h"
#include "common.h"
@@ -167,7 +167,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
.pins[0] = 2,
};
-#define LATCH1_GPIO_BASE 232
#define LATCH1_NGPIO 8
static struct resource latch1_resources[] = {
@@ -183,7 +182,6 @@ static struct resource latch1_resources[] = {
static struct bgpio_pdata latch1_pdata = {
.label = LATCH1_LABEL,
- .base = LATCH1_GPIO_BASE,
.ngpio = LATCH1_NGPIO,
};
@@ -206,11 +204,13 @@ static struct platform_device latch1_gpio_device = {
#define LATCH1_PIN_DOCKIT1 6
#define LATCH1_PIN_DOCKIT2 7
+#define LATCH2_NGPIO 16
+
static struct resource latch2_resources[] = {
[0] = {
.name = "dat",
.start = LATCH2_PHYS,
- .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+ .end = LATCH2_PHYS + (LATCH2_NGPIO - 1) / 8,
.flags = IORESOURCE_MEM,
},
};
@@ -219,8 +219,7 @@ static struct resource latch2_resources[] = {
static struct bgpio_pdata latch2_pdata = {
.label = LATCH2_LABEL,
- .base = AMS_DELTA_LATCH2_GPIO_BASE,
- .ngpio = AMS_DELTA_LATCH2_NGPIO,
+ .ngpio = LATCH2_NGPIO,
};
static struct platform_device latch2_gpio_device = {
@@ -247,8 +246,8 @@ static struct platform_device latch2_gpio_device = {
#define LATCH2_PIN_SCARD_CMDVCC 11
#define LATCH2_PIN_MODEM_NRESET 12
#define LATCH2_PIN_MODEM_CODEC 13
-#define LATCH2_PIN_HOOKFLASH1 14
-#define LATCH2_PIN_HOOKFLASH2 15
+#define LATCH2_PIN_AUDIO_MUTE 14
+#define LATCH2_PIN_HOOKFLASH 15
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
@@ -369,15 +368,9 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = {
},
};
-/*
- * Dynamically allocated GPIO numbers must be obtained fromm GPIO device
- * before they can be put in the gpio_led table. Before that happens,
- * initialize the table with invalid GPIO numbers, not 0.
- */
static struct gpio_led gpio_leds[] __initdata = {
[LATCH1_PIN_LED_CAMERA] = {
.name = "camera",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
#ifdef CONFIG_LEDS_TRIGGERS
.default_trigger = "ams_delta_camera",
@@ -385,27 +378,22 @@ static struct gpio_led gpio_leds[] __initdata = {
},
[LATCH1_PIN_LED_ADVERT] = {
.name = "advert",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_MAIL] = {
.name = "email",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_HANDSFREE] = {
.name = "handsfree",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_VOICEMAIL] = {
.name = "voicemail",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_VOICE] = {
.name = "voice",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
};
@@ -415,6 +403,24 @@ static const struct gpio_led_platform_data leds_pdata __initconst = {
.num_leds = ARRAY_SIZE(gpio_leds),
};
+static struct gpiod_lookup_table leds_gpio_table = {
+ .table = {
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_CAMERA, NULL,
+ LATCH1_PIN_LED_CAMERA, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_ADVERT, NULL,
+ LATCH1_PIN_LED_ADVERT, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_MAIL, NULL,
+ LATCH1_PIN_LED_MAIL, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_HANDSFREE, NULL,
+ LATCH1_PIN_LED_HANDSFREE, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICEMAIL, NULL,
+ LATCH1_PIN_LED_VOICEMAIL, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICE, NULL,
+ LATCH1_PIN_LED_VOICE, 0),
+ { },
+ },
+};
+
static struct i2c_board_info ams_delta_camera_board_info[] = {
{
I2C_BOARD_INFO("ov6650", 0x60),
@@ -586,6 +592,8 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
static struct gpiod_hog ams_delta_gpio_hogs[] = {
GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+ GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute",
+ GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
{},
};
@@ -675,6 +683,8 @@ static void __init ams_delta_latch2_init(void)
static void __init ams_delta_init(void)
{
+ struct platform_device *leds_pdev;
+
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
@@ -738,6 +748,12 @@ static void __init ams_delta_init(void)
gpiod_add_lookup_tables(ams_delta_gpio_tables,
ARRAY_SIZE(ams_delta_gpio_tables));
+ leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
+ if (!IS_ERR(leds_pdev)) {
+ leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
+ gpiod_add_lookup_table(&leds_gpio_table);
+ }
+
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
omapfb_set_lcd_config(&ams_delta_lcd_config);
@@ -794,64 +810,6 @@ static struct platform_device ams_delta_modem_device = {
},
};
-/*
- * leds-gpio driver doesn't make use of GPIO lookup tables,
- * it has to be provided with GPIO numbers over platform data
- * if GPIO descriptor info can't be obtained from device tree.
- * We could either define GPIO lookup tables and use them on behalf
- * of the leds-gpio device, or we can use GPIO driver level methods
- * for identification of GPIO numbers as long as we don't support
- * device tree. Let's do the latter.
- */
-static void __init ams_delta_led_init(struct gpio_chip *chip)
-{
- struct gpio_desc *gpiod;
- int i;
-
- for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) {
- gpiod = gpiochip_request_own_desc(chip, i, "camera-led", 0);
- if (IS_ERR(gpiod)) {
- pr_warn("%s: %s GPIO %d request failed (%ld)\n",
- __func__, LATCH1_LABEL, i, PTR_ERR(gpiod));
- continue;
- }
-
- /* Assign GPIO numbers to LED device. */
- gpio_leds[i].gpio = desc_to_gpio(gpiod);
-
- gpiochip_free_own_desc(gpiod);
- }
-
- gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
-}
-
-/*
- * The purpose of this function is to take care of assignment of GPIO numbers
- * to platform devices which depend on GPIO lines provided by Amstrad Delta
- * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables.
- * The function may be called as soon as latch1/latch2 GPIO devices are
- * initilized. Since basic-mmio-gpio driver is not registered before
- * device_initcall, this may happen at erliest during device_initcall_sync.
- * Dependent devices shouldn't be registered before that, their
- * registration may be performed from within this function or later.
- */
-static int __init ams_delta_gpio_init(void)
-{
- struct gpio_chip *chip;
-
- if (!machine_is_ams_delta())
- return -ENODEV;
-
- chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label);
- if (!chip)
- pr_err("%s: latch1 GPIO chip not found\n", __func__);
- else
- ams_delta_led_init(chip);
-
- return 0;
-}
-device_initcall_sync(ams_delta_gpio_init);
-
static int __init modem_nreset_init(void)
{
int err;
diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/board-ams-delta.h
index 3b2d8019238a..b5c4a373b905 100644
--- a/arch/arm/mach-omap1/include/mach/board-ams-delta.h
+++ b/arch/arm/mach-omap1/board-ams-delta.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ * arch/arm/mach-omap1/board-ams-delta.h
*
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
*
@@ -28,10 +28,6 @@
#if defined (CONFIG_MACH_AMS_DELTA)
-#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
-#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
-
#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
@@ -41,24 +37,6 @@
#define AMS_DELTA_GPIO_PIN_CONFIG 11
#define AMS_DELTA_GPIO_PIN_NAND_RB 12
-#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
-#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
-#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
-#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
-#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
-#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
-#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
-#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
-#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
-#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
-#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
-#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
-#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
-
-#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
-#define AMS_DELTA_LATCH2_NGPIO 16
-
#endif /* CONFIG_MACH_AMS_DELTA */
#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 2dc5deb19803..d4d8a32e57eb 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -43,6 +43,7 @@
#include <mach/hardware.h>
#include <mach/usb.h>
+#include "mmc.h"
#include "common.h"
#define PALMTE_USBDETECT_GPIO 0
@@ -208,6 +209,33 @@ static void __init palmte_misc_gpio_setup(void)
gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
}
+#if IS_ENABLED(CONFIG_MMC_OMAP)
+
+static struct omap_mmc_platform_data _palmte_mmc_config = {
+ .nr_slots = 1,
+ .slots[0] = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .name = "mmcblk",
+ },
+};
+
+static struct omap_mmc_platform_data *palmte_mmc_config[OMAP15XX_NR_MMC] = {
+ [0] = &_palmte_mmc_config,
+};
+
+static void palmte_mmc_init(void)
+{
+ omap1_init_mmc(palmte_mmc_config, OMAP15XX_NR_MMC);
+}
+
+#else /* CONFIG_MMC_OMAP */
+
+static void palmte_mmc_init(void)
+{
+}
+
+#endif /* CONFIG_MMC_OMAP */
+
static void __init omap_palmte_init(void)
{
/* mux pins for uarts */
@@ -228,6 +256,7 @@ static void __init omap_palmte_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
omapfb_set_lcd_config(&palmte_lcd_config);
+ palmte_mmc_init();
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index fa512413a471..c8c6fe88b2d6 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -968,7 +968,7 @@ late_initcall(omap_clk_enable_autoidle_all);
static struct dentry *clk_debugfs_root;
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+static int debug_clock_show(struct seq_file *s, void *unused)
{
struct clk *c;
struct clk *pa;
@@ -988,17 +988,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
return 0;
}
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
- return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-
-static const struct file_operations debug_clock_fops = {
- .open = clk_dbg_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(debug_clock);
static int clk_debugfs_register_one(struct clk *c)
{
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index baaf902b7016..e1243b5d554f 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -244,6 +244,9 @@ struct platform_device omap_spi2 = {
static void omap_init_spi100k(void)
{
+ if (!cpu_is_omap7xx())
+ return;
+
omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
if (omap_spi1.dev.platform_data)
platform_device_register(&omap_spi1);
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 52de382fc804..7e49dfda3d2f 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -200,10 +200,10 @@ void __init omap_check_revision(void)
printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type);
}
- printk(KERN_INFO "OMAP%04x", omap_revision >> 16);
+ pr_info("OMAP%04x", omap_revision >> 16);
if ((omap_revision >> 8) & 0xff)
- printk(KERN_INFO "%x", (omap_revision >> 8) & 0xff);
- printk(KERN_INFO " revision %i handled as %02xxx id: %08x%08x\n",
+ pr_cont("%x", (omap_revision >> 8) & 0xff);
+ pr_cont(" revision %i handled as %02xxx id: %08x%08x\n",
die_rev, omap_revision & 0xff, system_serial_low,
system_serial_high);
}
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 77867778d4ec..5429d86c7190 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -11,7 +11,7 @@
#include <linux/platform_data/usb-omap1.h>
-#if IS_ENABLED(CONFIG_USB)
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
void omap1_usb_init(struct omap_usb_config *pdata);
#else
static inline void omap1_usb_init(struct omap_usb_config *pdata)
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 3e1de14805e4..998075d3ef86 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -532,18 +532,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
return 0;
}
-static int omap_pm_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, omap_pm_debug_show,
- &inode->i_private);
-}
-
-static const struct file_operations omap_pm_debug_fops = {
- .open = omap_pm_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(omap_pm_debug);
static void omap_pm_init_debugfs(void)
{
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 68ba5f472f6b..859c71c4e932 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -199,8 +199,8 @@ void __init omap2xxx_check_revision(void)
pr_info("%s", soc_name);
if ((omap_rev() >> 8) & 0x0f)
- pr_info("%s", soc_rev);
- pr_info("\n");
+ pr_cont("%s", soc_rev);
+ pr_cont("\n");
}
#define OMAP3_SHOW_FEATURE(feat) \
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 083dcd9942ce..921c9aaee63f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2413,7 +2413,7 @@ static int __init _init(struct omap_hwmod *oh, void *data)
* a stub; implementing this properly requires iclk autoidle usecounting in
* the clock code. No return value.
*/
-static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
+static void _setup_iclk_autoidle(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
@@ -2444,7 +2444,7 @@ static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
* reset. Returns 0 upon success or a negative error code upon
* failure.
*/
-static int __init _setup_reset(struct omap_hwmod *oh)
+static int _setup_reset(struct omap_hwmod *oh)
{
int r;
@@ -2505,7 +2505,7 @@ static int __init _setup_reset(struct omap_hwmod *oh)
*
* No return value.
*/
-static void __init _setup_postsetup(struct omap_hwmod *oh)
+static void _setup_postsetup(struct omap_hwmod *oh)
{
u8 postsetup_state;
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index f4971e4a86b2..724cf5774a6c 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -28,7 +28,7 @@ static struct clockdomain *gfx_l4ls_clkdm;
static void __iomem *scu_base;
static struct omap_hwmod *rtc_oh;
-static int __init am43xx_map_scu(void)
+static int am43xx_map_scu(void)
{
scu_base = ioremap(scu_a9_get_base(), SZ_256);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 98ed5ac073bc..07bea84c5d6e 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -44,7 +44,6 @@
#include <linux/sched_clock.h>
#include <asm/mach/time.h>
-#include <asm/smp_twd.h>
#include "omap_hwmod.h"
#include "omap_device.h"
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 109fab292f94..b76b566280fa 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -564,7 +564,7 @@ static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
.exit = cm_x300_u2d_exit,
};
-static void cm_x300_init_u2d(void)
+static void __init cm_x300_init_u2d(void)
{
pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
}
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8e0b60a33026..39db4898dc4a 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -182,7 +182,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
-static void littleton_init_lcd(void)
+static void __init littleton_init_lcd(void)
{
pxa_set_fb_info(NULL, &littleton_lcd_info);
}
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 897ef59fbe0c..c411f79d4cb5 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -576,7 +576,7 @@ static struct pxaohci_platform_data zeus_ohci_platform_data = {
.flags = ENABLE_PORT_ALL | POWER_SENSE_LOW,
};
-static void zeus_register_ohci(void)
+static void __init zeus_register_ohci(void)
{
/* Port 2 is shared between host and client interface. */
UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h
index 0a188134deae..cb36058bc35e 100644
--- a/arch/arm/mach-s5pv210/common.h
+++ b/arch/arm/mach-s5pv210/common.h
@@ -10,7 +10,6 @@
#define __ARCH_ARM_MACH_S5PV210_COMMON_H
#ifdef CONFIG_PM_SLEEP
-u32 exynos_get_eint_wake_mask(void);
void s5pv210_cpu_resume(void);
void s5pv210_pm_init(void);
#else
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index f491249ab658..b336df0c57f3 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -32,6 +32,11 @@ static struct sleep_save s5pv210_core_save[] = {
*/
static u32 s5pv210_irqwake_intmask = 0xffffffff;
+static u32 s5pv210_read_eint_wakeup_mask(void)
+{
+ return __raw_readl(S5P_EINT_WAKEUP_MASK);
+}
+
/*
* Suspend helpers.
*/
@@ -59,8 +64,10 @@ static void s5pv210_pm_prepare(void)
{
unsigned int tmp;
- /* Set wake-up mask registers */
- __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+ /*
+ * Set wake-up mask registers
+ * S5P_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
+ */
__raw_writel(s5pv210_irqwake_intmask, S5P_WAKEUP_MASK);
/* ensure at least INFORM0 has the resume address */
@@ -89,6 +96,7 @@ static void s5pv210_pm_prepare(void)
*/
static int s5pv210_suspend_enter(suspend_state_t state)
{
+ u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask();
int ret;
s3c_pm_debug_init();
@@ -96,10 +104,10 @@ static int s5pv210_suspend_enter(suspend_state_t state)
S3C_PMDBG("%s: suspending the system...\n", __func__);
S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
- s5pv210_irqwake_intmask, exynos_get_eint_wake_mask());
+ s5pv210_irqwake_intmask, eint_wakeup_mask);
if (s5pv210_irqwake_intmask == -1U
- && exynos_get_eint_wake_mask() == -1U) {
+ && eint_wakeup_mask == -1U) {
pr_err("%s: No wake-up sources!\n", __func__);
pr_err("%s: Aborting sleep\n", __func__);
return -EINVAL;
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index b100c26a858f..3683d6f10973 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,139 +1,10 @@
# SPDX-License-Identifier: GPL-2.0
-config PM_RMOBILE
- bool
- select PM
- select PM_GENERIC_DOMAINS
-
-config ARCH_RCAR_GEN1
- bool
- select PM
- select PM_GENERIC_DOMAINS
- select RENESAS_INTC_IRQPIN
- select SYS_SUPPORTS_SH_TMU
-
-config ARCH_RCAR_GEN2
- bool
- select HAVE_ARM_ARCH_TIMER
- select PM
- select PM_GENERIC_DOMAINS
- select RENESAS_IRQC
- select SYS_SUPPORTS_SH_CMT
-
-config ARCH_RMOBILE
- bool
- select PM_RMOBILE
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_TMU
-
menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
depends on ARCH_MULTI_V7 && MMU
select ARM_GIC
select GPIOLIB
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
select NO_IOPORT_MAP
select PINCTRL
select SOC_BUS
select ZONE_DMA if ARM_LPAE
-
-if ARCH_RENESAS
-
-#comment "Renesas ARM SoCs System Type"
-
-config ARCH_EMEV2
- bool "Emma Mobile EV2"
- select SYS_SUPPORTS_EM_STI
-
-config ARCH_R7S72100
- bool "RZ/A1H (R7S72100)"
- select PM
- select PM_GENERIC_DOMAINS
- select SYS_SUPPORTS_SH_MTU2
- select RENESAS_OSTM
-
-config ARCH_R7S9210
- bool "RZ/A2 (R7S9210)"
- select PM
- select PM_GENERIC_DOMAINS
- select RENESAS_OSTM
-
-config ARCH_R8A73A4
- bool "R-Mobile APE6 (R8A73A40)"
- select ARCH_RMOBILE
- select ARM_ERRATA_798181 if SMP
- select HAVE_ARM_ARCH_TIMER
- select RENESAS_IRQC
-
-config ARCH_R8A7740
- bool "R-Mobile A1 (R8A77400)"
- select ARCH_RMOBILE
- select RENESAS_INTC_IRQPIN
-
-config ARCH_R8A7743
- bool "RZ/G1M (R8A77430)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
-
-config ARCH_R8A7744
- bool "RZ/G1N (R8A77440)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
-
-config ARCH_R8A7745
- bool "RZ/G1E (R8A77450)"
- select ARCH_RCAR_GEN2
-
-config ARCH_R8A77470
- bool "RZ/G1C (R8A77470)"
- select ARCH_RCAR_GEN2
-
-config ARCH_R8A7778
- bool "R-Car M1A (R8A77781)"
- select ARCH_RCAR_GEN1
-
-config ARCH_R8A7779
- bool "R-Car H1 (R8A77790)"
- select ARCH_RCAR_GEN1
-
-config ARCH_R8A7790
- bool "R-Car H2 (R8A77900)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
- select I2C
-
-config ARCH_R8A7791
- bool "R-Car M2-W (R8A77910)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
- select I2C
-
-config ARCH_R8A7792
- bool "R-Car V2H (R8A77920)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
-
-config ARCH_R8A7793
- bool "R-Car M2-N (R8A7793)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
- select I2C
-
-config ARCH_R8A7794
- bool "R-Car E2 (R8A77940)"
- select ARCH_RCAR_GEN2
-
-config ARCH_R9A06G032
- bool "RZ/N1D (R9A06G032)"
- select ARCH_RZN1
-
-config ARCH_RZN1
- bool "RZ/N1 (R9A06G0xx) Family"
- select ARM_AMBA
- select CPU_V7
-
-config ARCH_SH73A0
- bool "SH-Mobile AG5 (R8A73A00)"
- select ARCH_RMOBILE
- select RENESAS_INTC_IRQPIN
-endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 5591646cb9bb..f7bf17b7abae 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -35,7 +35,6 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
-obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
# Framework support
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
deleted file mode 100644
index c6a11b5ec6db..000000000000
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ /dev/null
@@ -1,353 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * rmobile power management support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2014 Glider bvba
- *
- * based on pm-sh7372.c
- * Copyright (C) 2011 Magnus Damm
- */
-#include <linux/clk/renesas.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/pm_clock.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-
-#include "pm-rmobile.h"
-
-/* SYSC */
-#define SPDCR 0x08 /* SYS Power Down Control Register */
-#define SWUCR 0x14 /* SYS Wakeup Control Register */
-#define PSTR 0x80 /* Power Status Register */
-
-#define PSTR_RETRIES 100
-#define PSTR_DELAY_US 10
-
-static inline
-struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
-{
- return container_of(d, struct rmobile_pm_domain, genpd);
-}
-
-static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
-{
- struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
- unsigned int mask;
-
- if (rmobile_pd->bit_shift == ~0)
- return -EBUSY;
-
- mask = BIT(rmobile_pd->bit_shift);
- if (rmobile_pd->suspend) {
- int ret = rmobile_pd->suspend();
-
- if (ret)
- return ret;
- }
-
- if (__raw_readl(rmobile_pd->base + PSTR) & mask) {
- unsigned int retry_count;
- __raw_writel(mask, rmobile_pd->base + SPDCR);
-
- for (retry_count = PSTR_RETRIES; retry_count; retry_count--) {
- if (!(__raw_readl(rmobile_pd->base + SPDCR) & mask))
- break;
- cpu_relax();
- }
- }
-
- if (!rmobile_pd->no_debug)
- pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n",
- genpd->name, mask,
- __raw_readl(rmobile_pd->base + PSTR));
-
- return 0;
-}
-
-static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
- bool do_resume)
-{
- unsigned int mask;
- unsigned int retry_count;
- int ret = 0;
-
- if (rmobile_pd->bit_shift == ~0)
- return 0;
-
- mask = BIT(rmobile_pd->bit_shift);
- if (__raw_readl(rmobile_pd->base + PSTR) & mask)
- goto out;
-
- __raw_writel(mask, rmobile_pd->base + SWUCR);
-
- for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
- if (!(__raw_readl(rmobile_pd->base + SWUCR) & mask))
- break;
- if (retry_count > PSTR_RETRIES)
- udelay(PSTR_DELAY_US);
- else
- cpu_relax();
- }
- if (!retry_count)
- ret = -EIO;
-
- if (!rmobile_pd->no_debug)
- pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
- rmobile_pd->genpd.name, mask,
- __raw_readl(rmobile_pd->base + PSTR));
-
-out:
- if (ret == 0 && rmobile_pd->resume && do_resume)
- rmobile_pd->resume();
-
- return ret;
-}
-
-static int rmobile_pd_power_up(struct generic_pm_domain *genpd)
-{
- return __rmobile_pd_power_up(to_rmobile_pd(genpd), true);
-}
-
-static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
-{
- struct generic_pm_domain *genpd = &rmobile_pd->genpd;
- struct dev_power_governor *gov = rmobile_pd->gov;
-
- genpd->flags |= GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
- genpd->power_off = rmobile_pd_power_down;
- genpd->power_on = rmobile_pd_power_up;
- genpd->attach_dev = cpg_mstp_attach_dev;
- genpd->detach_dev = cpg_mstp_detach_dev;
- __rmobile_pd_power_up(rmobile_pd, false);
- pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
-}
-
-static int rmobile_pd_suspend_console(void)
-{
- /*
- * Serial consoles make use of SCIF hardware located in this domain,
- * hence keep the power domain on if "no_console_suspend" is set.
- */
- return console_suspend_enabled ? 0 : -EBUSY;
-}
-
-enum pd_types {
- PD_NORMAL,
- PD_CPU,
- PD_CONSOLE,
- PD_DEBUG,
- PD_MEMCTL,
-};
-
-#define MAX_NUM_SPECIAL_PDS 16
-
-static struct special_pd {
- struct device_node *pd;
- enum pd_types type;
-} special_pds[MAX_NUM_SPECIAL_PDS] __initdata;
-
-static unsigned int num_special_pds __initdata;
-
-static const struct of_device_id special_ids[] __initconst = {
- { .compatible = "arm,coresight-etm3x", .data = (void *)PD_DEBUG },
- { .compatible = "renesas,dbsc-r8a73a4", .data = (void *)PD_MEMCTL, },
- { .compatible = "renesas,dbsc3-r8a7740", .data = (void *)PD_MEMCTL, },
- { .compatible = "renesas,sbsc-sh73a0", .data = (void *)PD_MEMCTL, },
- { /* sentinel */ },
-};
-
-static void __init add_special_pd(struct device_node *np, enum pd_types type)
-{
- unsigned int i;
- struct device_node *pd;
-
- pd = of_parse_phandle(np, "power-domains", 0);
- if (!pd)
- return;
-
- for (i = 0; i < num_special_pds; i++)
- if (pd == special_pds[i].pd && type == special_pds[i].type) {
- of_node_put(pd);
- return;
- }
-
- if (num_special_pds == ARRAY_SIZE(special_pds)) {
- pr_warn("Too many special PM domains\n");
- of_node_put(pd);
- return;
- }
-
- pr_debug("Special PM domain %pOFn type %d for %pOF\n", pd, type, np);
-
- special_pds[num_special_pds].pd = pd;
- special_pds[num_special_pds].type = type;
- num_special_pds++;
-}
-
-static void __init get_special_pds(void)
-{
- struct device_node *np;
- const struct of_device_id *id;
-
- /* PM domains containing CPUs */
- for_each_of_cpu_node(np)
- add_special_pd(np, PD_CPU);
-
- /* PM domain containing console */
- if (of_stdout)
- add_special_pd(of_stdout, PD_CONSOLE);
-
- /* PM domains containing other special devices */
- for_each_matching_node_and_match(np, special_ids, &id)
- add_special_pd(np, (enum pd_types)id->data);
-}
-
-static void __init put_special_pds(void)
-{
- unsigned int i;
-
- for (i = 0; i < num_special_pds; i++)
- of_node_put(special_pds[i].pd);
-}
-
-static enum pd_types __init pd_type(const struct device_node *pd)
-{
- unsigned int i;
-
- for (i = 0; i < num_special_pds; i++)
- if (pd == special_pds[i].pd)
- return special_pds[i].type;
-
- return PD_NORMAL;
-}
-
-static void __init rmobile_setup_pm_domain(struct device_node *np,
- struct rmobile_pm_domain *pd)
-{
- const char *name = pd->genpd.name;
-
- switch (pd_type(np)) {
- case PD_CPU:
- /*
- * This domain contains the CPU core and therefore it should
- * only be turned off if the CPU is not in use.
- */
- pr_debug("PM domain %s contains CPU\n", name);
- pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON;
- break;
-
- case PD_CONSOLE:
- pr_debug("PM domain %s contains serial console\n", name);
- pd->gov = &pm_domain_always_on_gov;
- pd->suspend = rmobile_pd_suspend_console;
- break;
-
- case PD_DEBUG:
- /*
- * This domain contains the Coresight-ETM hardware block and
- * therefore it should only be turned off if the debug module
- * is not in use.
- */
- pr_debug("PM domain %s contains Coresight-ETM\n", name);
- pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON;
- break;
-
- case PD_MEMCTL:
- /*
- * This domain contains a memory-controller and therefore it
- * should only be turned off if memory is not in use.
- */
- pr_debug("PM domain %s contains MEMCTL\n", name);
- pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON;
- break;
-
- case PD_NORMAL:
- break;
- }
-
- rmobile_init_pm_domain(pd);
-}
-
-static int __init rmobile_add_pm_domains(void __iomem *base,
- struct device_node *parent,
- struct generic_pm_domain *genpd_parent)
-{
- struct device_node *np;
-
- for_each_child_of_node(parent, np) {
- struct rmobile_pm_domain *pd;
- u32 idx = ~0;
-
- if (of_property_read_u32(np, "reg", &idx)) {
- /* always-on domain */
- }
-
- pd = kzalloc(sizeof(*pd), GFP_KERNEL);
- if (!pd) {
- of_node_put(np);
- return -ENOMEM;
- }
-
- pd->genpd.name = np->name;
- pd->base = base;
- pd->bit_shift = idx;
-
- rmobile_setup_pm_domain(np, pd);
- if (genpd_parent)
- pm_genpd_add_subdomain(genpd_parent, &pd->genpd);
- of_genpd_add_provider_simple(np, &pd->genpd);
-
- rmobile_add_pm_domains(base, np, &pd->genpd);
- }
- return 0;
-}
-
-static int __init rmobile_init_pm_domains(void)
-{
- struct device_node *np, *pmd;
- bool scanned = false;
- void __iomem *base;
- int ret = 0;
-
- for_each_compatible_node(np, NULL, "renesas,sysc-rmobile") {
- base = of_iomap(np, 0);
- if (!base) {
- pr_warn("%pOF cannot map reg 0\n", np);
- continue;
- }
-
- pmd = of_get_child_by_name(np, "pm-domains");
- if (!pmd) {
- pr_warn("%pOF lacks pm-domains node\n", np);
- continue;
- }
-
- if (!scanned) {
- /* Find PM domains containing special blocks */
- get_special_pds();
- scanned = true;
- }
-
- ret = rmobile_add_pm_domains(base, pmd, NULL);
- of_node_put(pmd);
- if (ret) {
- of_node_put(np);
- break;
- }
- }
-
- put_special_pds();
-
- return ret;
-}
-
-core_initcall(rmobile_init_pm_domains);
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
deleted file mode 100644
index 69f839259b09..000000000000
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#ifndef PM_RMOBILE_H
-#define PM_RMOBILE_H
-
-#include <linux/pm_domain.h>
-
-struct rmobile_pm_domain {
- struct generic_pm_domain genpd;
- struct dev_power_governor *gov;
- int (*suspend)(void);
- void (*resume)(void);
- void __iomem *base;
- unsigned int bit_shift;
- bool no_debug;
-};
-
-#endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 9bc543faba96..0403aa8629dd 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -12,7 +12,6 @@
#include <linux/delay.h>
#include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
#include "common.h"
#include "sh73a0.h"
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index d43798defdba..cc1745e6c60a 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -11,6 +11,13 @@ menuconfig ARCH_SOCFPGA
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
select PCI_DOMAINS_GENERIC if PCI
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_775420
+ select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
+ select PL310_ERRATA_753970 if PL310
+ select PL310_ERRATA_769419
if ARCH_SOCFPGA
config SOCFPGA_SUSPEND
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 65e1817d8afe..92cae0a9213f 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -34,8 +34,6 @@
#define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */
-extern void socfpga_init_clocks(void);
-extern void socfpga_sysmgr_init(void);
void socfpga_init_l2_ecc(void);
void socfpga_init_ocram_ecc(void);
void socfpga_init_arria10_l2_ecc(void);
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index dde14f7bf2c3..5fb6f79059a8 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -32,7 +32,7 @@ void __iomem *rst_manager_base_addr;
void __iomem *sdr_ctl_base_addr;
unsigned long socfpga_cpu1start_addr;
-void __init socfpga_sysmgr_init(void)
+static void __init socfpga_sysmgr_init(void)
{
struct device_node *np;
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d9c8ecf88ec6..7fa6a3d7efd4 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,6 +1,6 @@
menuconfig ARCH_SUNXI
bool "Allwinner SoCs"
- depends on ARCH_MULTI_V7
+ depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
@@ -9,9 +9,13 @@ menuconfig ARCH_SUNXI
select PM_OPP
select SUN4I_TIMER
select RESET_CONTROLLER
+ help
+ Support for Allwinner ARM-based family of processors
if ARCH_SUNXI
+if ARCH_MULTI_V7
+
config MACH_SUN4I
bool "Allwinner A10 (sun4i) SoCs support"
default ARCH_SUNXI
@@ -56,3 +60,16 @@ config ARCH_SUNXI_MC_SMP
select ARM_CPU_SUSPEND
endif
+
+if ARCH_MULTI_V5
+
+config MACH_SUNIV
+ bool "Allwinner ARMv5 F-series (suniv) SoCs support"
+ default ARCH_SUNXI
+ help
+ Support for Allwinner suniv ARMv5 SoCs.
+ (F1C100A, F1C100s, F1C200s, F1C500, F1C600)
+
+endif
+
+endif
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index de4b0e932f22..8a7f301839c2 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -101,3 +101,12 @@ static const char * const sun9i_board_dt_compat[] = {
DT_MACHINE_START(SUN9I_DT, "Allwinner sun9i Family")
.dt_compat = sun9i_board_dt_compat,
MACHINE_END
+
+static const char * const suniv_board_dt_compat[] = {
+ "allwinner,suniv-f1c100s",
+ NULL,
+};
+
+DT_MACHINE_START(SUNIV_DT, "Allwinner suniv Family")
+ .dt_compat = suniv_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index a69b22d37eed..a186ab663b0b 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -72,7 +72,7 @@ static const struct of_device_id tegra114_dt_gic_match[] __initconst = {
{ }
};
-static void tegra114_gic_cpu_pm_registration(void)
+static void __init tegra114_gic_cpu_pm_registration(void)
{
struct device_node *dn;
@@ -85,7 +85,7 @@ static void tegra114_gic_cpu_pm_registration(void)
cpu_pm_register_notifier(&tegra_gic_notifier_block);
}
#else
-static void tegra114_gic_cpu_pm_registration(void) { }
+static void __init tegra114_gic_cpu_pm_registration(void) { }
#endif
static const struct of_device_id tegra_ictlr_match[] __initconst = {
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 377ff9cda667..53da57fba39c 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -239,6 +239,7 @@ comment "Power management"
config SAMSUNG_PM_DEBUG
bool "Samsung PM Suspend debug"
depends on PM && DEBUG_KERNEL
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
help
Say Y here if you want verbose debugging from the PM Suspend and
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 51bc479334a4..28f052185eb6 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -157,70 +157,12 @@ config ARCH_REALTEK
config ARCH_RENESAS
bool "Renesas SoC Platforms"
+ select GPIOLIB
select PINCTRL
- select PM
- select PM_GENERIC_DOMAINS
- select RENESAS_IRQC
select SOC_BUS
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_TMU
help
This enables support for the ARMv8 based Renesas SoCs.
-config ARCH_R8A774A1
- bool "Renesas RZ/G2M SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas RZ/G2M SoC.
-
-config ARCH_R8A774C0
- bool "Renesas RZ/G2E SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas RZ/G2E SoC.
-
-config ARCH_R8A7795
- bool "Renesas R-Car H3 SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas R-Car H3 SoC.
-
-config ARCH_R8A7796
- bool "Renesas R-Car M3-W SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas R-Car M3-W SoC.
-
-config ARCH_R8A77965
- bool "Renesas R-Car M3-N SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas R-Car M3-N SoC.
-
-config ARCH_R8A77970
- bool "Renesas R-Car V3M SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas R-Car V3M SoC.
-
-config ARCH_R8A77980
- bool "Renesas R-Car V3H SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas R-Car V3H SoC.
-
-config ARCH_R8A77990
- bool "Renesas R-Car E3 SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas R-Car E3 SoC.
-
-config ARCH_R8A77995
- bool "Renesas R-Car D3 SoC Platform"
- depends on ARCH_RENESAS
- help
- This enables support for the Renesas R-Car D3 SoC.
-
config ARCH_ROCKCHIP
bool "Rockchip Platforms"
select ARCH_HAS_RESET_CONTROLLER
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 2405eaad0296..0f2523296b8a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -195,7 +195,7 @@
compatible = "adi,adv7180cp";
reg = <0x20>;
- port {
+ ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 1d35f5406b5e..5bd4d69914bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -97,7 +97,7 @@
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_pwr_en>;
regulator-name = "vcc3v3_pcie";
@@ -293,12 +293,12 @@
};
};
- vcc2v8_dvp: LDO_REG2 {
- regulator-name = "vcc2v8_dvp";
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -397,7 +397,9 @@
vdd_cpu_b: regulator@40 {
compatible = "silergy,syr827";
reg = <0x40>;
- fcs,suspend-voltage-selector = <0>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -415,6 +417,8 @@
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -519,7 +523,7 @@
pcie {
pcie_pwr_en: pcie-pwr-en {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -529,7 +533,7 @@
};
vsel1_gpio: vsel1-gpio {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
vsel2_gpio: vsel2-gpio {