summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 14:33:21 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 14:33:21 -0700
commit0bf6a210a43f7118d858806200127e421649fc4e (patch)
tree9a17d88ebd1b9bc693fba7f39c12123dec96e930 /arch
parentee1a8d402e7e204d57fb108aa40003b6d1633036 (diff)
parent5c913a9a9772f4b434aaea7328836419287b5d1c (diff)
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig47
-rw-r--r--arch/arm/boot/dts/dbx5x0.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4212.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4x12.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-snow.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi20
-rw-r--r--arch/arm/boot/dts/exynos5440-sd5v1.dts2
-rw-r--r--arch/arm/boot/dts/exynos5440-ssdk5440.dts2
-rw-r--r--arch/arm/boot/dts/exynos5440.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3430-sdp.dts1
-rw-r--r--arch/arm/boot/dts/s3c2416-smdk2416.dts2
-rw-r--r--arch/arm/boot/dts/s3c2416.dtsi4
-rw-r--r--arch/arm/boot/dts/s3c24xx.dtsi2
-rw-r--r--arch/arm/boot/dts/snowball.dts13
-rw-r--r--arch/arm/configs/omap1_defconfig3
-rw-r--r--arch/arm/mach-omap1/Makefile4
-rw-r--r--arch/arm/mach-omap1/mailbox.c199
-rw-r--r--arch/arm/mach-omap2/Makefile3
-rw-r--r--arch/arm/mach-omap2/board-flash.c3
-rw-r--r--arch/arm/mach-omap2/devices.c13
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c44
-rw-r--r--arch/arm/mach-omap2/gpmc.c82
-rw-r--r--arch/arm/mach-omap2/mailbox.c430
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c14
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c13
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c13
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig66
-rw-r--r--arch/arm/mach-s3c24xx/Makefile6
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-debugfs.c198
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-s3c2410.c160
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-s3c2412.c258
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-s3c2440.c312
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq.c711
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/s3c2412.h (renamed from arch/arm/mach-s3c24xx/s3c2412.h)0
-rw-r--r--arch/arm/mach-s3c24xx/iotiming-s3c2412.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500-audio.c68
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c56
-rw-r--r--arch/arm/mach-ux500/board-mop500.c94
-rw-r--r--arch/arm/mach-ux500/board-mop500.h2
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c66
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c123
-rw-r--r--arch/arm/mach-ux500/ste-dma40-db8500.h193
-rw-r--r--arch/arm/mach-ux500/usb.c47
-rw-r--r--arch/arm/plat-omap/Kconfig16
-rw-r--r--arch/arm/plat-omap/Makefile3
-rw-r--r--arch/arm/plat-omap/include/plat/mailbox.h105
-rw-r--r--arch/arm/plat-omap/mailbox.c435
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu-freq-core.h10
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu-freq.h6
61 files changed, 365 insertions, 3529 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7a13c2cd7a86..49fdc432512f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2087,53 +2087,6 @@ menu "CPU Power Management"
if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_S3C
- bool
- help
- Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
- bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
- depends on ARCH_S3C24XX && CPU_FREQ
- select CPU_FREQ_S3C
- help
- This enables the CPUfreq driver for the Samsung S3C24XX family
- of CPUs.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
- bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
- depends on CPU_FREQ_S3C24XX
- help
- Compile in support for changing the PLL frequency from the
- S3C24XX series CPUfreq driver. The PLL takes time to settle
- after a frequency change, so by default it is not enabled.
-
- This also means that the PLL tables for the selected CPU(s) will
- be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
- bool "Debug CPUfreq Samsung driver core"
- depends on CPU_FREQ_S3C24XX
- help
- Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
- bool "Debug CPUfreq Samsung driver IO timing"
- depends on CPU_FREQ_S3C24XX
- help
- Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
- bool "Export debugfs for CPUFreq"
- depends on CPU_FREQ_S3C24XX && DEBUG_FS
- help
- Export status information via debugfs.
-
endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index a082f0ba1ddb..a1529455f081 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -360,6 +360,11 @@
interrupt-controller;
#interrupt-cells = <2>;
+ ab8500_gpio: ab8500-gpio {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index bed40ee2e4f6..3f94fe8e3706 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -19,7 +19,7 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 08609b8bdaf1..382d8c7e2906 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -15,7 +15,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4210";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 91332b72acf5..9c01b718d29d 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -15,7 +15,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 9a14484c7bb1..94eebffe3044 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Samsung Trats based on Exynos4210";
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 345cdb51dcb7..889cdada1ce9 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Samsung Universal C210 based on Exynos4210 rev0";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index d4f8067e89ba..b7f358a93bcb 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -19,8 +19,8 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4.dtsi"
-/include/ "exynos4210-pinctrl.dtsi"
+#include "exynos4.dtsi"
+#include "exynos4210-pinctrl.dtsi"
/ {
compatible = "samsung,exynos4210";
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index c0f60f49cea6..6f34d7f6ba7e 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -17,7 +17,7 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4x12.dtsi"
+#include "exynos4x12.dtsi"
/ {
compatible = "samsung,exynos4212";
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 867d9452619b..46c678ee119c 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -12,7 +12,7 @@
*/
/dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"
/ {
model = "Hardkernel ODROID-X board based on Exynos4412";
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index ca73c42f77e1..7993641cb32a 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index a8ba195c41ac..ad316a1ee9e0 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"
/ {
model = "Samsung SMDK evaluation board based on Exynos4412";
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 270b389e0a1b..e743e677a9e2 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -17,7 +17,7 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4x12.dtsi"
+#include "exynos4x12.dtsi"
/ {
compatible = "samsung,exynos4412";
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 35cb2099d55e..01da194ba329 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -17,8 +17,8 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4.dtsi"
-/include/ "exynos4x12-pinctrl.dtsi"
+#include "exynos4.dtsi"
+#include "exynos4x12-pinctrl.dtsi"
/ {
aliases {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c6db281a3430..abc7272c7afd 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5250.dtsi"
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 1e21200b6d85..35a66dee4011 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5250.dtsi"
+#include "exynos5250.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 05244f150dd9..e79331dba12d 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,8 +9,8 @@
*/
/dts-v1/;
-/include/ "exynos5250.dtsi"
-/include/ "cros5250-common.dtsi"
+#include "exynos5250.dtsi"
+#include "cros5250-common.dtsi"
/ {
model = "Google Snow";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 54a35e64c781..964158c1844f 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,8 +17,10 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
-/include/ "exynos5250-pinctrl.dtsi"
+#include "skeleton.dtsi"
+#include "exynos5250-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
/ {
compatible = "samsung,exynos5250";
@@ -72,6 +74,12 @@
#clock-cells = <1>;
};
+ clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5250-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ };
+
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -451,6 +459,10 @@
&pdma0 9
&pdma0 8>;
dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
samsung,supports-6ch;
samsung,supports-rstclr;
samsung,supports-secdai;
@@ -465,6 +477,8 @@
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
+ clocks = <&clock 307>, <&clock 157>;
+ clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
};
@@ -475,6 +489,8 @@
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
+ clocks = <&clock 308>, <&clock 158>;
+ clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
};
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index f722a0263ac8..5b22508050da 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5440.dtsi"
+#include "exynos5440.dtsi"
/ {
model = "SAMSUNG SD5v1 board based on EXYNOS5440";
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ba88cfd2486f..ede772741f81 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5440.dtsi"
+#include "exynos5440.dtsi"
/ {
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index bfcb907b7e33..ff7f5d855845 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -9,7 +9,7 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "samsung,exynos5440";
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index c4a1c0a97728..e2249bcc3e63 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -106,7 +106,6 @@
nand-bus-width = <8>;
ti,nand-ecc-opt = "sw";
- gpmc,device-nand;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index ad1dd09c10eb..59594cf15998 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "s3c2416.dtsi"
+#include "s3c2416.dtsi"
/ {
model = "SMDK2416";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 6809324934a3..e6555bdd81b8 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*/
-/include/ "s3c24xx.dtsi"
-/include/ "s3c2416-pinctrl.dtsi"
+#include "s3c24xx.dtsi"
+#include "s3c2416-pinctrl.dtsi"
/ {
model = "Samsung S3C2416 SoC";
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index cab46ff5fb4d..2d1d7dc9418a 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "samsung,s3c24xx";
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index fb9dce529da6..49824be66845 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -22,12 +22,13 @@
en_3v3_reg: en_3v3 {
compatible = "regulator-fixed";
- regulator-name = "en-3v3-fixed-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio0 26 0x4>; // 26
- startup-delay-us = <5000>;
- enable-active-high;
+ regulator-name = "en-3v3-fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
+ gpio = <&ab8500_gpio 25 0x4>;
+ startup-delay-us = <5000>;
+ enable-active-high;
};
gpio_keys {
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 9940f7b4e438..d74edbad18fc 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -26,7 +26,8 @@ CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MBOX_FWK=y
+CONFIG_MAILBOX=y
+CONFIG_OMAP1_MBOX=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_ARCH_OMAP730=y
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 222d58c0ae76..3889b6cd211e 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -19,10 +19,6 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
-# DSP
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
-mailbox_mach-objs := mailbox.o
-
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
deleted file mode 100644
index efc8f207f6fc..000000000000
--- a/arch/arm/mach-omap1/mailbox.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Mailbox reservation modules for OMAP1
- *
- * Copyright (C) 2006-2009 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <plat/mailbox.h>
-
-#define MAILBOX_ARM2DSP1 0x00
-#define MAILBOX_ARM2DSP1b 0x04
-#define MAILBOX_DSP2ARM1 0x08
-#define MAILBOX_DSP2ARM1b 0x0c
-#define MAILBOX_DSP2ARM2 0x10
-#define MAILBOX_DSP2ARM2b 0x14
-#define MAILBOX_ARM2DSP1_Flag 0x18
-#define MAILBOX_DSP2ARM1_Flag 0x1c
-#define MAILBOX_DSP2ARM2_Flag 0x20
-
-static void __iomem *mbox_base;
-
-struct omap_mbox1_fifo {
- unsigned long cmd;
- unsigned long data;
- unsigned long flag;
-};
-
-struct omap_mbox1_priv {
- struct omap_mbox1_fifo tx_fifo;
- struct omap_mbox1_fifo rx_fifo;
-};
-
-static inline int mbox_read_reg(size_t ofs)
-{
- return __raw_readw(mbox_base + ofs);
-}
-
-static inline void mbox_write_reg(u32 val, size_t ofs)
-{
- __raw_writew(val, mbox_base + ofs);
-}
-
-/* msg */
-static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
-{
- struct omap_mbox1_fifo *fifo =
- &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
- mbox_msg_t msg;
-
- msg = mbox_read_reg(fifo->data);
- msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16;
-
- return msg;
-}
-
-static void
-omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- struct omap_mbox1_fifo *fifo =
- &((struct omap_mbox1_priv *)mbox->priv)->tx_fifo;
-
- mbox_write_reg(msg & 0xffff, fifo->data);
- mbox_write_reg(msg >> 16, fifo->cmd);
-}
-
-static int omap1_mbox_fifo_empty(struct omap_mbox *mbox)
-{
- return 0;
-}
-
-static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
-{
- struct omap_mbox1_fifo *fifo =
- &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
-
- return mbox_read_reg(fifo->flag);
-}
-
-/* irq */
-static void
-omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
-{
- if (irq == IRQ_RX)
- enable_irq(mbox->irq);
-}
-
-static void
-omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
-{
- if (irq == IRQ_RX)
- disable_irq(mbox->irq);
-}
-
-static int
-omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
-{
- if (irq == IRQ_TX)
- return 0;
- return 1;
-}
-
-static struct omap_mbox_ops omap1_mbox_ops = {
- .type = OMAP_MBOX_TYPE1,
- .fifo_read = omap1_mbox_fifo_read,
- .fifo_write = omap1_mbox_fifo_write,
- .fifo_empty = omap1_mbox_fifo_empty,
- .fifo_full = omap1_mbox_fifo_full,
- .enable_irq = omap1_mbox_enable_irq,
- .disable_irq = omap1_mbox_disable_irq,
- .is_irq = omap1_mbox_is_irq,
-};
-
-/* FIXME: the following struct should be created automatically by the user id */
-
-/* DSP */
-static struct omap_mbox1_priv omap1_mbox_dsp_priv = {
- .tx_fifo = {
- .cmd = MAILBOX_ARM2DSP1b,
- .data = MAILBOX_ARM2DSP1,
- .flag = MAILBOX_ARM2DSP1_Flag,
- },
- .rx_fifo = {
- .cmd = MAILBOX_DSP2ARM1b,
- .data = MAILBOX_DSP2ARM1,
- .flag = MAILBOX_DSP2ARM1_Flag,
- },
-};
-
-static struct omap_mbox mbox_dsp_info = {
- .name = "dsp",
- .ops = &omap1_mbox_ops,
- .priv = &omap1_mbox_dsp_priv,
-};
-
-static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
-
-static int omap1_mbox_probe(struct platform_device *pdev)
-{
- struct resource *mem;
- int ret;
- struct omap_mbox **list;
-
- list = omap1_mboxes;
- list[0]->irq = platform_get_irq_byname(pdev, "dsp");
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mbox_base = ioremap(mem->start, resource_size(mem));
- if (!mbox_base)
- return -ENOMEM;
-
- ret = omap_mbox_register(&pdev->dev, list);
- if (ret) {
- iounmap(mbox_base);
- return ret;
- }
-
- return 0;
-}
-
-static int omap1_mbox_remove(struct platform_device *pdev)
-{
- omap_mbox_unregister();
- iounmap(mbox_base);
- return 0;
-}
-
-static struct platform_driver omap1_mbox_driver = {
- .probe = omap1_mbox_probe,
- .remove = omap1_mbox_remove,
- .driver = {
- .name = "omap-mailbox",
- },
-};
-
-static int __init omap1_mbox_init(void)
-{
- return platform_driver_register(&omap1_mbox_driver);
-}
-
-static void __exit omap1_mbox_exit(void)
-{
- platform_driver_unregister(&omap1_mbox_driver);
-}
-
-module_init(omap1_mbox_init);
-module_exit(omap1_mbox_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
-MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8e8c605ebefe..ea5a27ff9941 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -212,9 +212,6 @@ obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o
obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
-mailbox_mach-objs := mailbox.o
-
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
obj-y += $(iommu-m) $(iommu-y)
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index c33adea0247c..fc20a61f6b2a 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -112,6 +112,9 @@ struct gpmc_timings nand_default_timings[1] = {
.cs_rd_off = 36,
.cs_wr_off = 36,
+ .we_on = 6,
+ .oe_on = 6,
+
.adv_on = 6,
.adv_rd_off = 24,
.adv_wr_off = 36,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 403c211e35d0..aef96e45cb20 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -21,6 +21,7 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/wl12xx.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -283,25 +284,31 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
return 0;
}
-#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
+#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
+ struct omap_mbox_pdata *pdata;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
pr_err("%s: unable to find hwmod\n", __func__);
return;
}
+ if (!oh->dev_attr) {
+ pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
+ return;
+ }
- pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0);
+ pdata = (struct omap_mbox_pdata *)oh->dev_attr;
+ pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
__func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP_MBOX_FWK */
+#endif /* CONFIG_OMAP2PLUS_MBOX */
static inline void omap_init_sti(void) {}
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index d9c27195caf0..662c7fd633cc 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -43,44 +43,6 @@ static struct platform_device gpmc_nand_device = {
.resource = gpmc_nand_resource,
};
-static int omap2_nand_gpmc_retime(
- struct omap_nand_platform_data *gpmc_nand_data,
- struct gpmc_timings *gpmc_t)
-{
- struct gpmc_timings t;
- int err;
-
- memset(&t, 0, sizeof(t));
- t.sync_clk = gpmc_t->sync_clk;
- t.cs_on = gpmc_t->cs_on;
- t.adv_on = gpmc_t->adv_on;
-
- /* Read */
- t.adv_rd_off = gpmc_t->adv_rd_off;
- t.oe_on = t.adv_on;
- t.access = gpmc_t->access;
- t.oe_off = gpmc_t->oe_off;
- t.cs_rd_off = gpmc_t->cs_rd_off;
- t.rd_cycle = gpmc_t->rd_cycle;
-
- /* Write */
- t.adv_wr_off = gpmc_t->adv_wr_off;
- t.we_on = t.oe_on;
- if (cpu_is_omap34xx()) {
- t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus;
- t.wr_access = gpmc_t->wr_access;
- }
- t.we_off = gpmc_t->we_off;
- t.cs_wr_off = gpmc_t->cs_wr_off;
- t.wr_cycle = gpmc_t->wr_cycle;
-
- err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
- if (err)
- return err;
-
- return 0;
-}
-
static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
{
/* support only OMAP3 class */
@@ -131,7 +93,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
if (gpmc_t) {
- err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
+ err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
if (err < 0) {
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
@@ -140,8 +102,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
if (gpmc_nand_data->of_node) {
gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
} else {
- s.device_nand = true;
-
/* Enable RD PIN Monitoring Reg */
if (gpmc_nand_data->dev_ready) {
s.wait_on_read = true;
@@ -149,6 +109,8 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
}
}
+ s.device_nand = true;
+
if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
s.device_width = GPMC_DEVWIDTH_16BIT;
else
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 6c4da1254f53..1c7969e965d7 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -30,6 +30,7 @@
#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/mtd/nand.h>
+#include <linux/pm_runtime.h>
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -155,6 +156,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
+static unsigned int gpmc_cs_num = GPMC_CS_NUM;
static unsigned int gpmc_nr_waitpins;
static struct device *gpmc_dev;
static int gpmc_irq;
@@ -521,8 +523,10 @@ static int gpmc_cs_remap(int cs, u32 base)
int ret;
u32 old_base, size;
- if (cs > GPMC_CS_NUM)
+ if (cs > gpmc_cs_num) {
+ pr_err("%s: requested chip-select is disabled\n", __func__);
return -ENODEV;
+ }
gpmc_cs_get_memconf(cs, &old_base, &size);
if (base == old_base)
return 0;
@@ -545,9 +549,10 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
struct resource *res = &gpmc_cs_mem[cs];
int r = -1;
- if (cs > GPMC_CS_NUM)
+ if (cs > gpmc_cs_num) {
+ pr_err("%s: requested chip-select is disabled\n", __func__);
return -ENODEV;
-
+ }
size = gpmc_mem_align(size);
if (size > (1 << GPMC_SECTION_SHIFT))
return -ENOMEM;
@@ -582,7 +587,7 @@ EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
spin_lock(&gpmc_mem_lock);
- if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
+ if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
BUG();
spin_unlock(&gpmc_mem_lock);
@@ -777,7 +782,7 @@ static void gpmc_mem_exit(void)
{
int cs;
- for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+ for (cs = 0; cs < gpmc_cs_num; cs++) {
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_delete_mem(cs);
@@ -798,7 +803,7 @@ static void gpmc_mem_init(void)
gpmc_mem_root.end = GPMC_MEM_END;
/* Reserve all regions that has been set up by bootloader */
- for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+ for (cs = 0; cs < gpmc_cs_num; cs++) {
u32 base, size;
if (!gpmc_cs_mem_enabled(cs))
@@ -1245,7 +1250,6 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
- p->device_nand = of_property_read_bool(np, "gpmc,device-nand");
of_property_read_u32(np, "gpmc,device-width", &p->device_width);
of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
@@ -1345,6 +1349,13 @@ static const char * const nand_ecc_opts[] = {
[OMAP_ECC_BCH8_CODE_HW] = "bch8",
};
+static const char * const nand_xfer_types[] = {
+ [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
+ [NAND_OMAP_POLLED] = "polled",
+ [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
+ [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
+};
+
static int gpmc_probe_nand_child(struct platform_device *pdev,
struct device_node *child)
{
@@ -1374,6 +1385,13 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
break;
}
+ if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
+ for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
+ if (!strcasecmp(s, nand_xfer_types[val])) {
+ gpmc_nand_data->xfer_type = val;
+ break;
+ }
+
val = of_get_nand_bus_width(child);
if (val == 16)
gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
@@ -1513,6 +1531,20 @@ static int gpmc_probe_dt(struct platform_device *pdev)
if (!of_id)
return 0;
+ ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs",
+ &gpmc_cs_num);
+ if (ret < 0) {
+ pr_err("%s: number of chip-selects not defined\n", __func__);
+ return ret;
+ } else if (gpmc_cs_num < 1) {
+ pr_err("%s: all chip-selects are disabled\n", __func__);
+ return -EINVAL;
+ } else if (gpmc_cs_num > GPMC_CS_NUM) {
+ pr_err("%s: number of supported chip-selects cannot be > %d\n",
+ __func__, GPMC_CS_NUM);
+ return -EINVAL;
+ }
+
ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
&gpmc_nr_waitpins);
if (ret < 0) {
@@ -1577,7 +1609,8 @@ static int gpmc_probe(struct platform_device *pdev)
return PTR_ERR(gpmc_l3_clk);
}
- clk_prepare_enable(gpmc_l3_clk);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
gpmc_dev = &pdev->dev;
@@ -1610,12 +1643,14 @@ static int gpmc_probe(struct platform_device *pdev)
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
- if (!pdev->dev.of_node)
+ if (!pdev->dev.of_node) {
+ gpmc_cs_num = GPMC_CS_NUM;
gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+ }
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
- clk_disable_unprepare(gpmc_l3_clk);
+ pm_runtime_put_sync(&pdev->dev);
clk_put(gpmc_l3_clk);
dev_err(gpmc_dev, "failed to probe DT parameters\n");
return rc;
@@ -1628,10 +1663,30 @@ static int gpmc_remove(struct platform_device *pdev)
{
gpmc_free_irq();
gpmc_mem_exit();
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
gpmc_dev = NULL;
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int gpmc_suspend(struct device *dev)
+{
+ omap3_gpmc_save_context();
+ pm_runtime_put_sync(dev);
+ return 0;
+}
+
+static int gpmc_resume(struct device *dev)
+{
+ pm_runtime_get_sync(dev);
+ omap3_gpmc_restore_context();
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume);
+
static struct platform_driver gpmc_driver = {
.probe = gpmc_probe,
.remove = gpmc_remove,
@@ -1639,6 +1694,7 @@ static struct platform_driver gpmc_driver = {
.name = DEVICE_NAME,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(gpmc_dt_ids),
+ .pm = &gpmc_pm_ops,
},
};
@@ -1701,7 +1757,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-#ifdef CONFIG_ARCH_OMAP3
static struct omap3_gpmc_regs gpmc_context;
void omap3_gpmc_save_context(void)
@@ -1715,7 +1770,7 @@ void omap3_gpmc_save_context(void)
gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
- for (i = 0; i < GPMC_CS_NUM; i++) {
+ for (i = 0; i < gpmc_cs_num; i++) {
gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
if (gpmc_context.cs_context[i].is_valid) {
gpmc_context.cs_context[i].config1 =
@@ -1747,7 +1802,7 @@ void omap3_gpmc_restore_context(void)
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
- for (i = 0; i < GPMC_CS_NUM; i++) {
+ for (i = 0; i < gpmc_cs_num; i++) {
if (gpmc_context.cs_context[i].is_valid) {
gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
gpmc_context.cs_context[i].config1);
@@ -1766,4 +1821,3 @@ void omap3_gpmc_restore_context(void)
}
}
}
-#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
deleted file mode 100644
index 0b080267b7f6..000000000000
--- a/arch/arm/mach-omap2/mailbox.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * Mailbox reservation modules for OMAP2/3
- *
- * Copyright (C) 2006-2009 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- * and Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-
-#include <plat/mailbox.h>
-
-#include "soc.h"
-
-#define MAILBOX_REVISION 0x000
-#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
-#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m))
-#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m))
-#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u))
-#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u))
-
-#define OMAP4_MAILBOX_IRQSTATUS(u) (0x104 + 0x10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE(u) (0x108 + 0x10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE_CLR(u) (0x10c + 0x10 * (u))
-
-#define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m)))
-#define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1))
-
-#define MBOX_REG_SIZE 0x120
-
-#define OMAP4_MBOX_REG_SIZE 0x130
-
-#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32))
-#define OMAP4_MBOX_NR_REGS (OMAP4_MBOX_REG_SIZE / sizeof(u32))
-
-static void __iomem *mbox_base;
-
-struct omap_mbox2_fifo {
- unsigned long msg;
- unsigned long fifo_stat;
- unsigned long msg_stat;
-};
-
-struct omap_mbox2_priv {
- struct omap_mbox2_fifo tx_fifo;
- struct omap_mbox2_fifo rx_fifo;
- unsigned long irqenable;
- unsigned long irqstatus;
- u32 newmsg_bit;
- u32 notfull_bit;
- u32 ctx[OMAP4_MBOX_NR_REGS];
- unsigned long irqdisable;
-};
-
-static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq);
-
-static inline unsigned int mbox_read_reg(size_t ofs)
-{
- return __raw_readl(mbox_base + ofs);
-}
-
-static inline void mbox_write_reg(u32 val, size_t ofs)
-{
- __raw_writel(val, mbox_base + ofs);
-}
-
-/* Mailbox H/W preparations */
-static int omap2_mbox_startup(struct omap_mbox *mbox)
-{
- u32 l;
-
- pm_runtime_enable(mbox->dev->parent);
- pm_runtime_get_sync(mbox->dev->parent);
-
- l = mbox_read_reg(MAILBOX_REVISION);
- pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
-
- return 0;
-}
-
-static void omap2_mbox_shutdown(struct omap_mbox *mbox)
-{
- pm_runtime_put_sync(mbox->dev->parent);
- pm_runtime_disable(mbox->dev->parent);
-}
-
-/* Mailbox FIFO handle functions */
-static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
-{
- struct omap_mbox2_fifo *fifo =
- &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
- return (mbox_msg_t) mbox_read_reg(fifo->msg);
-}
-
-static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- struct omap_mbox2_fifo *fifo =
- &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
- mbox_write_reg(msg, fifo->msg);
-}
-
-static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
-{
- struct omap_mbox2_fifo *fifo =
- &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
- return (mbox_read_reg(fifo->msg_stat) == 0);
-}
-
-static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
-{
- struct omap_mbox2_fifo *fifo =
- &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
- return mbox_read_reg(fifo->fifo_stat);
-}
-
-/* Mailbox IRQ handle functions */
-static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
-{
- struct omap_mbox2_priv *p = mbox->priv;
- u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
- l = mbox_read_reg(p->irqenable);
- l |= bit;
- mbox_write_reg(l, p->irqenable);
-}
-
-static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
-{
- struct omap_mbox2_priv *p = mbox->priv;
- u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
- if (!cpu_is_omap44xx())
- bit = mbox_read_reg(p->irqdisable) & ~bit;
-
- mbox_write_reg(bit, p->irqdisable);
-}
-
-static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
-{
- struct omap_mbox2_priv *p = mbox->priv;
- u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
- mbox_write_reg(bit, p->irqstatus);
-
- /* Flush posted write for irq status to avoid spurious interrupts */
- mbox_read_reg(p->irqstatus);
-}
-
-static int omap2_mbox_is_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
-{
- struct omap_mbox2_priv *p = mbox->priv;
- u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
- u32 enable = mbox_read_reg(p->irqenable);
- u32 status = mbox_read_reg(p->irqstatus);
-
- return (int)(enable & status & bit);
-}
-
-static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
-{
- int i;
- struct omap_mbox2_priv *p = mbox->priv;
- int nr_regs;
- if (cpu_is_omap44xx())
- nr_regs = OMAP4_MBOX_NR_REGS;
- else
- nr_regs = MBOX_NR_REGS;
- for (i = 0; i < nr_regs; i++) {
- p->ctx[i] = mbox_read_reg(i * sizeof(u32));
-
- dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
- i, p->ctx[i]);
- }
-}
-
-static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
-{
- int i;
- struct omap_mbox2_priv *p = mbox->priv;
- int nr_regs;
- if (cpu_is_omap44xx())
- nr_regs = OMAP4_MBOX_NR_REGS;
- else
- nr_regs = MBOX_NR_REGS;
- for (i = 0; i < nr_regs; i++) {
- mbox_write_reg(p->ctx[i], i * sizeof(u32));
-
- dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
- i, p->ctx[i]);
- }
-}
-
-static struct omap_mbox_ops omap2_mbox_ops = {
- .type = OMAP_MBOX_TYPE2,
- .startup = omap2_mbox_startup,
- .shutdown = omap2_mbox_shutdown,
- .fifo_read = omap2_mbox_fifo_read,
- .fifo_write = omap2_mbox_fifo_write,
- .fifo_empty = omap2_mbox_fifo_empty,
- .fifo_full = omap2_mbox_fifo_full,
- .enable_irq = omap2_mbox_enable_irq,
- .disable_irq = omap2_mbox_disable_irq,
- .ack_irq = omap2_mbox_ack_irq,
- .is_irq = omap2_mbox_is_irq,
- .save_ctx = omap2_mbox_save_ctx,
- .restore_ctx = omap2_mbox_restore_ctx,
-};
-
-/*
- * MAILBOX 0: ARM -> DSP,
- * MAILBOX 1: ARM <- DSP.
- * MAILBOX 2: ARM -> IVA,
- * MAILBOX 3: ARM <- IVA.
- */
-
-/* FIXME: the following structs should be filled automatically by the user id */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP2)
-/* DSP */
-static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(0),
- .fifo_stat = MAILBOX_FIFOSTATUS(0),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(1),
- .msg_stat = MAILBOX_MSGSTATUS(1),
- },
- .irqenable = MAILBOX_IRQENABLE(0),
- .irqstatus = MAILBOX_IRQSTATUS(0),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(0),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(1),
- .irqdisable = MAILBOX_IRQENABLE(0),
-};
-
-struct omap_mbox mbox_dsp_info = {
- .name = "dsp",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_dsp_priv,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
-#endif
-
-#if defined(CONFIG_SOC_OMAP2420)
-/* IVA */
-static struct omap_mbox2_priv omap2_mbox_iva_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(2),
- .fifo_stat = MAILBOX_FIFOSTATUS(2),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(3),
- .msg_stat = MAILBOX_MSGSTATUS(3),
- },
- .irqenable = MAILBOX_IRQENABLE(3),
- .irqstatus = MAILBOX_IRQSTATUS(3),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(2),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(3),
- .irqdisable = MAILBOX_IRQENABLE(3),
-};
-
-static struct omap_mbox mbox_iva_info = {
- .name = "iva",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_iva_priv,
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-struct omap_mbox *omap2_mboxes[] = {
- &mbox_dsp_info,
-#ifdef CONFIG_SOC_OMAP2420
- &mbox_iva_info,
-#endif
- NULL
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-/* OMAP4 */
-static struct omap_mbox2_priv omap2_mbox_1_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(0),
- .fifo_stat = MAILBOX_FIFOSTATUS(0),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(1),
- .msg_stat = MAILBOX_MSGSTATUS(1),
- },
- .irqenable = OMAP4_MAILBOX_IRQENABLE(0),
- .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(0),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(1),
- .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0),
-};
-
-struct omap_mbox mbox_1_info = {
- .name = "mailbox-1",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_1_priv,
-};
-
-static struct omap_mbox2_priv omap2_mbox_2_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(3),
- .fifo_stat = MAILBOX_FIFOSTATUS(3),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(2),
- .msg_stat = MAILBOX_MSGSTATUS(2),
- },
- .irqenable = OMAP4_MAILBOX_IRQENABLE(0),
- .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(3),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(2),
- .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0),
-};
-
-struct omap_mbox mbox_2_info = {
- .name = "mailbox-2",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_2_priv,
-};
-
-struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
-#endif
-
-static int omap2_mbox_probe(struct platform_device *pdev)
-{
- struct resource *mem;
- int ret;
- struct omap_mbox **list;
-
- if (false)
- ;
-#if defined(CONFIG_ARCH_OMAP3)
- else if (cpu_is_omap34xx()) {
- list = omap3_mboxes;
-
- list[0]->irq = platform_get_irq(pdev, 0);
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
- else if (cpu_is_omap2430()) {
- list = omap2_mboxes;
-
- list[0]->irq = platform_get_irq(pdev, 0);
- } else if (cpu_is_omap2420()) {
- list = omap2_mboxes;
-
- list[0]->irq = platform_get_irq_byname(pdev, "dsp");
- list[1]->irq = platform_get_irq_byname(pdev, "iva");
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- else if (cpu_is_omap44xx()) {
- list = omap4_mboxes;
-
- list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0);
- }
-#endif
- else {
- pr_err("%s: platform not supported\n", __func__);
- return -ENODEV;
- }
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mbox_base = ioremap(mem->start, resource_size(mem));
- if (!mbox_base)
- return -ENOMEM;
-
- ret = omap_mbox_register(&pdev->dev, list);
- if (ret) {
- iounmap(mbox_base);
- return ret;
- }
-
- return 0;
-}
-
-static int omap2_mbox_remove(struct platform_device *pdev)
-{
- omap_mbox_unregister();
- iounmap(mbox_base);
- return 0;
-}
-
-static struct platform_driver omap2_mbox_driver = {
- .probe = omap2_mbox_probe,
- .remove = omap2_mbox_remove,
- .driver = {
- .name = "omap-mailbox",
- },
-};
-
-static int __init omap2_mbox_init(void)
-{
- return platform_driver_register(&omap2_mbox_driver);
-}
-
-static void __exit omap2_mbox_exit(void)
-{
- platform_driver_unregister(&omap2_mbox_driver);
-}
-
-module_init(omap2_mbox_init);
-module_exit(omap2_mbox_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
-MODULE_AUTHOR("Paul Mundt");
-MODULE_ALIAS("platform:omap2-mailbox");
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 5137cc84b504..d8b9d60f854f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -16,6 +16,7 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -166,6 +167,18 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
};
/* mailbox */
+static struct omap_mbox_dev_info omap2420_mailbox_info[] = {
+ { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 },
+ { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 },
+};
+
+static struct omap_mbox_pdata omap2420_mailbox_attrs = {
+ .num_users = 4,
+ .num_fifos = 6,
+ .info_cnt = ARRAY_SIZE(omap2420_mailbox_info),
+ .info = omap2420_mailbox_info,
+};
+
static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
{ .name = "dsp", .irq = 26 + OMAP_INTC_START, },
{ .name = "iva", .irq = 34 + OMAP_INTC_START, },
@@ -186,6 +199,7 @@ static struct omap_hwmod omap2420_mailbox_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
+ .dev_attr = &omap2420_mailbox_attrs,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 4ce999ee3ee9..5b9083461dc5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -17,6 +17,7 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -170,6 +171,17 @@ static struct omap_hwmod omap2430_dma_system_hwmod = {
};
/* mailbox */
+static struct omap_mbox_dev_info omap2430_mailbox_info[] = {
+ { .name = "dsp", .tx_id = 0, .rx_id = 1 },
+};
+
+static struct omap_mbox_pdata omap2430_mailbox_attrs = {
+ .num_users = 4,
+ .num_fifos = 6,
+ .info_cnt = ARRAY_SIZE(omap2430_mailbox_info),
+ .info = omap2430_mailbox_info,
+};
+
static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
{ .irq = 26 + OMAP_INTC_START, },
{ .irq = -1 },
@@ -189,6 +201,7 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
+ .dev_attr = &omap2430_mailbox_attrs,
};
/* mcspi3 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index fa9915411440..f7a3df2fb579 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -25,6 +25,7 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "am35xx.h"
@@ -1504,6 +1505,17 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
.sysc = &omap3xxx_mailbox_sysc,
};
+static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = {
+ { .name = "dsp", .tx_id = 0, .rx_id = 1 },
+};
+
+static struct omap_mbox_pdata omap3xxx_mailbox_attrs = {
+ .num_users = 2,
+ .num_fifos = 2,
+ .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info),
+ .info = omap3xxx_mailbox_info,
+};
+
static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
{ .irq = 26 + OMAP_INTC_START, },
{ .irq = -1 },
@@ -1523,6 +1535,7 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = {
.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
},
},
+ .dev_attr = &omap3xxx_mailbox_attrs,
};
/*
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0adb2b85f830..6d9252e081ce 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,7 +28,7 @@ config CPU_S3C2410
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
select S3C2410_CLOCK
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
select SAMSUNG_HRT
select SAMSUNG_WDT_RESET
@@ -206,27 +206,38 @@ config S3C24XX_GPIO_EXTRA128
Add an extra 128 gpio numbers to the available GPIO pool. This is
available for boards that need extra gpios for external devices.
+config S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+ depends on ARM_S3C24XX
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
config S3C2410_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX
+ depends on ARM_S3C24XX_CPUFREQ
help
Internal node to select io timing code that is common to the s3c2410
and s3c2440/s3c2442 cpu frequency support.
config S3C2410_CPUFREQ_UTILS
- bool
- depends on CPU_FREQ_S3C24XX
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
+ bool
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
config S3C2412_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
help
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
@@ -235,16 +246,9 @@ config S3C2412_IOTIMING
if CPU_S3C2410
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
config S3C2410_PLL
bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
default y
help
Select the PLL table for the S3C2410
@@ -280,7 +284,7 @@ config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
@@ -387,14 +391,6 @@ config CPU_S3C2412_ONLY
!CPU_S3C2442 && !CPU_S3C2443
default y
-config S3C2412_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
config S3C2412_DMA
bool
help
@@ -508,14 +504,6 @@ endif # CPU_S3C2416
if CPU_S3C2440
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- default y
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config S3C2440_DMA
bool
help
@@ -535,15 +523,15 @@ config S3C2440_XTAL_16934400
config S3C2440_PLL_12000000
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
config S3C2440_PLL_16934400
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
@@ -597,7 +585,7 @@ config MACH_NEXCODER_2440
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA128
@@ -669,7 +657,7 @@ config MACH_RX1950
bool "HP iPAQ rx1950"
select I2C
select PM_H1940 if PM
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
select S3C24XX_DCLK
select S3C24XX_PWM
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 6de730bada4d..7f54e5b954ca 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,13 +17,11 @@ obj- :=
obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
#
# machine support
# following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
deleted file mode 100644
index 9b7b4289d66c..000000000000
--- a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright (c) 2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling - debugfs status support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-
-#include <plat/cpu-freq-core.h>
-
-static struct dentry *dbgfs_root;
-static struct dentry *dbgfs_file_io;
-static struct dentry *dbgfs_file_info;
-static struct dentry *dbgfs_file_board;
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-static void show_max(struct seq_file *seq, struct s3c_freq *f)
-{
- seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
- f->fclk, f->hclk, f->pclk, f->armclk);
-}
-
-static int board_show(struct seq_file *seq, void *p)
-{
- struct s3c_cpufreq_config *cfg;
- struct s3c_cpufreq_board *brd;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- brd = cfg->board;
- if (!brd) {
- seq_printf(seq, "no board definition set?\n");
- return 0;
- }
-
- seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
- seq_printf(seq, "auto_io=%u\n", brd->auto_io);
- seq_printf(seq, "need_io=%u\n", brd->need_io);
-
- show_max(seq, &brd->max);
-
-
- return 0;
-}
-
-static int fops_board_open(struct inode *inode, struct file *file)
-{
- return single_open(file, board_show, NULL);
-}
-
-static const struct file_operations fops_board = {
- .open = fops_board_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int info_show(struct seq_file *seq, void *p)
-{
- struct s3c_cpufreq_config *cfg;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk);
- seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n",
- cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
- seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk);
- seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
- seq_printf(seq, "\n");
-
- show_max(seq, &cfg->max);
-
- seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
- cfg->divs.h_divisor, cfg->divs.p_divisor,
- cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
- seq_printf(seq, "\n");
-
- seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
-
- return 0;
-}
-
-static int fops_info_open(struct inode *inode, struct file *file)
-{
- return single_open(file, info_show, NULL);
-}
-
-static const struct file_operations fops_info = {
- .open = fops_info_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int io_show(struct seq_file *seq, void *p)
-{
- void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
- struct s3c_cpufreq_config *cfg;
- struct s3c_iotimings *iot;
- union s3c_iobank *iob;
- int bank;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- show_bank = cfg->info->debug_io_show;
- if (!show_bank) {
- seq_printf(seq, "no code to show bank timing\n");
- return 0;
- }
-
- iot = s3c_cpufreq_getiotimings();
- if (!iot) {
- seq_printf(seq, "no io timings registered\n");
- return 0;
- }
-
- seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- iob = &iot->bank[bank];
-
- seq_printf(seq, "bank %d: ", bank);
-
- if (!iob->io_2410) {
- seq_printf(seq, "nothing set\n");
- continue;
- }
-
- show_bank(seq, cfg, iob);
- }
-
- return 0;
-}
-
-static int fops_io_open(struct inode *inode, struct file *file)
-{
- return single_open(file, io_show, NULL);
-}
-
-static const struct file_operations fops_io = {
- .open = fops_io_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-
-static int __init s3c_freq_debugfs_init(void)
-{
- dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
- if (IS_ERR(dbgfs_root)) {
- printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
- return PTR_ERR(dbgfs_root);
- }
-
- dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
- NULL, &fops_io);
-
- dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
- NULL, &fops_info);
-
- dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
- NULL, &fops_board);
-
- return 0;
-}
-
-late_initcall(s3c_freq_debugfs_init);
-
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
deleted file mode 100644
index cfa0dd8723ec..000000000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
-
-static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- u32 clkdiv = 0;
-
- if (cfg->divs.h_divisor == 2)
- clkdiv |= S3C2410_CLKDIVN_HDIVN;
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2410_CLKDIVN_PDIVN;
-
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long hclk, fclk, pclk;
- unsigned int hdiv, pdiv;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- hclk_max = cfg->max.hclk;
-
- cfg->freq.armclk = fclk;
-
- s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
- __func__, fclk, hclk_max);
-
- hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
- hclk = fclk / hdiv;
-
- if (hclk > cfg->max.hclk) {
- s3c_freq_dbg("%s: hclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
- pclk = hclk / pdiv;
-
- if (pclk > cfg->max.pclk) {
- s3c_freq_dbg("%s: pclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv *= hdiv;
-
- /* record the result */
- cfg->divs.p_divisor = pdiv;
- cfg->divs.h_divisor = hdiv;
-
- return 0;
-}
-
-static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
- .max = {
- .fclk = 200000000,
- .hclk = 100000000,
- .pclk = 50000000,
- },
-
- /* transition latency is about 5ms worst-case, so
- * set 10ms to be sure */
- .latency = 10000000,
-
- .locktime_m = 150,
- .locktime_u = 150,
- .locktime_bits = 12,
-
- .need_pll = 1,
-
- .name = "s3c2410",
- .calc_iotiming = s3c2410_iotiming_calc,
- .set_iotiming = s3c2410_iotiming_set,
- .get_iotiming = s3c2410_iotiming_get,
- .resume_clocks = s3c2410_setup_clocks,
-
- .set_fvco = s3c2410_set_fvco,
- .set_refresh = s3c2410_cpufreq_setrefresh,
- .set_divs = s3c2410_cpufreq_setdivs,
- .calc_divs = s3c2410_cpufreq_calcdivs,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2410_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- return s3c_cpufreq_register(&s3c2410_cpufreq_info);
-}
-
-static struct subsys_interface s3c2410_cpufreq_interface = {
- .name = "s3c2410_cpufreq",
- .subsys = &s3c2410_subsys,
- .add_dev = s3c2410_cpufreq_add,
-};
-
-static int __init s3c2410_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410_cpufreq_interface);
-}
-arch_initcall(s3c2410_cpufreq_init);
-
-static int s3c2410a_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- /* alter the maximum freq settings for S3C2410A. If a board knows
- * it only has a maximum of 200, then it should register its own
- * limits. */
-
- s3c2410_cpufreq_info.max.fclk = 266000000;
- s3c2410_cpufreq_info.max.hclk = 133000000;
- s3c2410_cpufreq_info.max.pclk = 66500000;
- s3c2410_cpufreq_info.name = "s3c2410a";
-
- return s3c2410_cpufreq_add(dev, sif);
-}
-
-static struct subsys_interface s3c2410a_cpufreq_interface = {
- .name = "s3c2410a_cpufreq",
- .subsys = &s3c2410a_subsys,
- .add_dev = s3c2410a_cpufreq_add,
-};
-
-static int __init s3c2410a_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410a_cpufreq_interface);
-}
-arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
deleted file mode 100644
index 8bf0f3a77476..000000000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 CPU Frequency scalling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-#include "s3c2412.h"
-
-/* our clock resources. */
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned int hdiv, pdiv, armdiv, dvs;
- unsigned long hclk, fclk, armclk, armdiv_clk;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- armclk = cfg->freq.armclk;
- hclk_max = cfg->max.hclk;
-
- /* We can't run hclk above armclk as at the best we have to
- * have armclk and hclk in dvs mode. */
-
- if (hclk_max > armclk)
- hclk_max = armclk;
-
- s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
- __func__, fclk, armclk, hclk_max);
- s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
- __func__, cfg->freq.fclk, cfg->freq.armclk,
- cfg->freq.hclk, cfg->freq.pclk);
-
- armdiv = fclk / armclk;
-
- if (armdiv < 1)
- armdiv = 1;
- if (armdiv > 2)
- armdiv = 2;
-
- cfg->divs.arm_divisor = armdiv;
- armdiv_clk = fclk / armdiv;
-
- hdiv = armdiv_clk / hclk_max;
- if (hdiv < 1)
- hdiv = 1;
-
- cfg->freq.hclk = hclk = armdiv_clk / hdiv;
-
- /* set dvs depending on whether we reached armclk or not. */
- cfg->divs.dvs = dvs = armclk < armdiv_clk;
-
- /* update the actual armclk we achieved. */
- cfg->freq.armclk = dvs ? hclk : armdiv_clk;
-
- s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
- __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
-
- if (hdiv > 4)
- goto invalid;
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
- if ((hclk / pdiv) > cfg->max.pclk)
- pdiv++;
-
- cfg->freq.pclk = hclk / pdiv;
-
- s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
- if (pdiv > 2)
- goto invalid;
-
- pdiv *= hdiv;
-
- /* store the result, and then return */
-
- cfg->divs.h_divisor = hdiv * armdiv;
- cfg->divs.p_divisor = pdiv * armdiv;
-
- return 0;
-
-invalid:
- return -EINVAL;
-}
-
-static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long clkdiv;
- unsigned long olddiv;
-
- olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
-
- /* clear off current clock info */
-
- clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
- clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
- clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
-
- if (cfg->divs.arm_divisor == 2)
- clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
-
- clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2412_CLKDIVN_PDIVN;
-
- s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-
- clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- struct s3c_cpufreq_board *board = cfg->board;
- unsigned long refresh;
-
- s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
- board->refresh, cfg->freq.hclk);
-
- /* Reduce both the refresh time (in ns) and the frequency (in MHz)
- * by 10 each to ensure that we do not overflow 32 bit numbers. This
- * should work for HCLK up to 133MHz and refresh period up to 30usec.
- */
-
- refresh = (board->refresh / 10);
- refresh *= (cfg->freq.hclk / 100);
- refresh /= (1 * 1000 * 1000); /* 10^6 */
-
- s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
- __raw_writel(refresh, S3C2412_REFRESH);
-}
-
-/* set the default cpu frequency information, based on an 200MHz part
- * as we have no other way of detecting the speed rating in software.
- */
-
-static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
- .max = {
- .fclk = 200000000,
- .hclk = 100000000,
- .pclk = 50000000,
- },
-
- .latency = 5000000, /* 5ms */
-
- .locktime_m = 150,
- .locktime_u = 150,
- .locktime_bits = 16,
-
- .name = "s3c2412",
- .set_refresh = s3c2412_cpufreq_setrefresh,
- .set_divs = s3c2412_cpufreq_setdivs,
- .calc_divs = s3c2412_cpufreq_calcdivs,
-
- .calc_iotiming = s3c2412_iotiming_calc,
- .set_iotiming = s3c2412_iotiming_set,
- .get_iotiming = s3c2412_iotiming_get,
-
- .resume_clocks = s3c2412_setup_clocks,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
-};
-
-static int s3c2412_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- unsigned long fclk_rate;
-
- hclk = clk_get(NULL, "hclk");
- if (IS_ERR(hclk)) {
- printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
- return -ENOENT;
- }
-
- fclk = clk_get(NULL, "fclk");
- if (IS_ERR(fclk)) {
- printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
- goto err_fclk;
- }
-
- fclk_rate = clk_get_rate(fclk);
- if (fclk_rate > 200000000) {
- printk(KERN_INFO
- "%s: fclk %ld MHz, assuming 266MHz capable part\n",
- __func__, fclk_rate / 1000000);
- s3c2412_cpufreq_info.max.fclk = 266000000;
- s3c2412_cpufreq_info.max.hclk = 133000000;
- s3c2412_cpufreq_info.max.pclk = 66000000;
- }
-
- armclk = clk_get(NULL, "armclk");
- if (IS_ERR(armclk)) {
- printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
- goto err_armclk;
- }
-
- xtal = clk_get(NULL, "xtal");
- if (IS_ERR(xtal)) {
- printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
- goto err_xtal;
- }
-
- return s3c_cpufreq_register(&s3c2412_cpufreq_info);
-
-err_xtal:
- clk_put(armclk);
-err_armclk:
- clk_put(fclk);
-err_fclk:
- clk_put(hclk);
-
- return -ENOENT;
-}
-
-static struct subsys_interface s3c2412_cpufreq_interface = {
- .name = "s3c2412_cpufreq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_cpufreq_add,
-};
-
-static int s3c2412_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2412_cpufreq_interface);
-}
-arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
deleted file mode 100644
index 72b2cc8a5a85..000000000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * Copyright (c) 2006-2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- * Vincent Sanders <vince@simtec.co.uk>
- *
- * S3C2440/S3C2442 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-#include <plat/clock.h>
-
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static inline int within_khz(unsigned long a, unsigned long b)
-{
- long diff = a - b;
-
- return (diff >= -1000 && diff <= 1000);
-}
-
-/**
- * s3c2440_cpufreq_calcdivs - calculate divider settings
- * @cfg: The cpu frequency settings.
- *
- * Calcualte the divider values for the given frequency settings
- * specified in @cfg. The values are stored in @cfg for later use
- * by the relevant set routine if the request settings can be reached.
- */
-int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned int hdiv, pdiv;
- unsigned long hclk, fclk, armclk;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- armclk = cfg->freq.armclk;
- hclk_max = cfg->max.hclk;
-
- s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
- __func__, fclk, armclk, hclk_max);
-
- if (armclk > fclk) {
- printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
- armclk = fclk;
- }
-
- /* if we are in DVS, we need HCLK to be <= ARMCLK */
- if (armclk < fclk && armclk < hclk_max)
- hclk_max = armclk;
-
- for (hdiv = 1; hdiv < 9; hdiv++) {
- if (hdiv == 5 || hdiv == 7)
- hdiv++;
-
- hclk = (fclk / hdiv);
- if (hclk <= hclk_max || within_khz(hclk, hclk_max))
- break;
- }
-
- s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
-
- if (hdiv > 8)
- goto invalid;
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
- if ((hclk / pdiv) > cfg->max.pclk)
- pdiv++;
-
- s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
- if (pdiv > 2)
- goto invalid;
-
- pdiv *= hdiv;
-
- /* calculate a valid armclk */
-
- if (armclk < hclk)
- armclk = hclk;
-
- /* if we're running armclk lower than fclk, this really means
- * that the system should go into dvs mode, which means that
- * armclk is connected to hclk. */
- if (armclk < fclk) {
- cfg->divs.dvs = 1;
- armclk = hclk;
- } else
- cfg->divs.dvs = 0;
-
- cfg->freq.armclk = armclk;
-
- /* store the result, and then return */
-
- cfg->divs.h_divisor = hdiv;
- cfg->divs.p_divisor = pdiv;
-
- return 0;
-
- invalid:
- return -EINVAL;
-}
-
-#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
- S3C2440_CAMDIVN_HCLK4_HALF)
-
-/**
- * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
- * @cfg: The cpu frequency settings.
- *
- * Set the divisors from the settings in @cfg, which where generated
- * during the calculation phase by s3c2440_cpufreq_calcdivs().
- */
-static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long clkdiv, camdiv;
-
- s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
- cfg->divs.h_divisor, cfg->divs.p_divisor);
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
-
- clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
- camdiv &= ~CAMDIVN_HCLK_HALF;
-
- switch (cfg->divs.h_divisor) {
- case 1:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
- break;
-
- case 2:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
- break;
-
- case 6:
- camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
- case 3:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
- break;
-
- case 8:
- camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
- case 4:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
- break;
-
- default:
- BUG(); /* we don't expect to get here. */
- }
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2440_CLKDIVN_PDIVN;
-
- /* todo - set pclk. */
-
- /* Write the divisors first with hclk intentionally halved so that
- * when we write clkdiv we will under-frequency instead of over. We
- * then make a short delay and remove the hclk halving if necessary.
- */
-
- __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-
- ndelay(20);
- __raw_writel(camdiv, S3C2440_CAMDIVN);
-
- clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
- int *divs,
- struct cpufreq_frequency_table *table,
- size_t table_size)
-{
- unsigned long freq;
- int index = 0;
- int div;
-
- for (div = *divs; div > 0; div = *divs++) {
- freq = fclk / div;
-
- if (freq > max_hclk && div != 1)
- continue;
-
- freq /= 1000; /* table is in kHz */
- index = s3c_cpufreq_addfreq(table, index, table_size, freq);
- if (index < 0)
- break;
- }
-
- return index;
-}
-
-static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
-
-static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
- struct cpufreq_frequency_table *table,
- size_t table_size)
-{
- int ret;
-
- WARN_ON(cfg->info == NULL);
- WARN_ON(cfg->board == NULL);
-
- ret = run_freq_for(cfg->info->max.hclk,
- cfg->info->max.fclk,
- hclk_divs,
- table, table_size);
-
- s3c_freq_dbg("%s: returning %d\n", __func__, ret);
-
- return ret;
-}
-
-struct s3c_cpufreq_info s3c2440_cpufreq_info = {
- .max = {
- .fclk = 400000000,
- .hclk = 133333333,
- .pclk = 66666666,
- },
-
- .locktime_m = 300,
- .locktime_u = 300,
- .locktime_bits = 16,
-
- .name = "s3c244x",
- .calc_iotiming = s3c2410_iotiming_calc,
- .set_iotiming = s3c2410_iotiming_set,
- .get_iotiming = s3c2410_iotiming_get,
- .set_fvco = s3c2410_set_fvco,
-
- .set_refresh = s3c2410_cpufreq_setrefresh,
- .set_divs = s3c2440_cpufreq_setdivs,
- .calc_divs = s3c2440_cpufreq_calcdivs,
- .calc_freqtable = s3c2440_cpufreq_calctable,
-
- .resume_clocks = s3c244x_setup_clocks,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2440_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- xtal = s3c_cpufreq_clk_get(NULL, "xtal");
- hclk = s3c_cpufreq_clk_get(NULL, "hclk");
- fclk = s3c_cpufreq_clk_get(NULL, "fclk");
- armclk = s3c_cpufreq_clk_get(NULL, "armclk");
-
- if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
- printk(KERN_ERR "%s: failed to get clocks\n", __func__);
- return -ENOENT;
- }
-
- return s3c_cpufreq_register(&s3c2440_cpufreq_info);
-}
-
-static struct subsys_interface s3c2440_cpufreq_interface = {
- .name = "s3c2440_cpufreq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_cpufreq_add,
-};
-
-static int s3c2440_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2440_cpufreq_interface);
-}
-
-/* arch_initcall adds the clocks we need, so use subsys_initcall. */
-subsys_initcall(s3c2440_cpufreq_init);
-
-static struct subsys_interface s3c2442_cpufreq_interface = {
- .name = "s3c2442_cpufreq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2440_cpufreq_add,
-};
-
-static int s3c2442_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2442_cpufreq_interface);
-}
-subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c
deleted file mode 100644
index 3c0e78ede0da..000000000000
--- a/arch/arm/mach-s3c24xx/cpufreq.c
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/sysfs.h>
-#include <linux/slab.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-#include <mach/regs-clock.h>
-
-/* note, cpufreq support deals in kHz, no Hz */
-
-static struct cpufreq_driver s3c24xx_driver;
-static struct s3c_cpufreq_config cpu_cur;
-static struct s3c_iotimings s3c24xx_iotiming;
-static struct cpufreq_frequency_table *pll_reg;
-static unsigned int last_target = ~0;
-static unsigned int ftab_size;
-static struct cpufreq_frequency_table *ftab;
-
-static struct clk *_clk_mpll;
-static struct clk *_clk_xtal;
-static struct clk *clk_fclk;
-static struct clk *clk_hclk;
-static struct clk *clk_pclk;
-static struct clk *clk_arm;
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
-{
- return &cpu_cur;
-}
-
-struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
-{
- return &s3c24xx_iotiming;
-}
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
-
-static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
-{
- unsigned long fclk, pclk, hclk, armclk;
-
- cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
- cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
- cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
- cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
-
- cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
- cfg->pll.frequency = fclk;
-
- cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-
- cfg->divs.h_divisor = fclk / hclk;
- cfg->divs.p_divisor = fclk / pclk;
-}
-
-static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
-{
- unsigned long pll = cfg->pll.frequency;
-
- cfg->freq.fclk = pll;
- cfg->freq.hclk = pll / cfg->divs.h_divisor;
- cfg->freq.pclk = pll / cfg->divs.p_divisor;
-
- /* convert hclk into 10ths of nanoseconds for io calcs */
- cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-}
-
-static inline int closer(unsigned int target, unsigned int n, unsigned int c)
-{
- int diff_cur = abs(target - c);
- int diff_new = abs(target - n);
-
- return (diff_new < diff_cur);
-}
-
-static void s3c_cpufreq_show(const char *pfx,
- struct s3c_cpufreq_config *cfg)
-{
- s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
- pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
- cfg->freq.hclk, cfg->divs.h_divisor,
- cfg->freq.pclk, cfg->divs.p_divisor);
-}
-
-/* functions to wrapper the driver info calls to do the cpu specific work */
-
-static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
-{
- if (cfg->info->set_iotiming)
- (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
-}
-
-static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
-{
- if (cfg->info->calc_iotiming)
- return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
-
- return 0;
-}
-
-static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_refresh)(cfg);
-}
-
-static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_divs)(cfg);
-}
-
-static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- return (cfg->info->calc_divs)(cfg);
-}
-
-static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_fvco)(cfg);
-}
-
-static inline void s3c_cpufreq_resume_clocks(void)
-{
- cpu_cur.info->resume_clocks();
-}
-
-static inline void s3c_cpufreq_updateclk(struct clk *clk,
- unsigned int freq)
-{
- clk_set_rate(clk, freq);
-}
-
-static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
- unsigned int target_freq,
- struct cpufreq_frequency_table *pll)
-{
- struct s3c_cpufreq_freqs freqs;
- struct s3c_cpufreq_config cpu_new;
- unsigned long flags;
-
- cpu_new = cpu_cur; /* copy new from current */
-
- s3c_cpufreq_show("cur", &cpu_cur);
-
- /* TODO - check for DMA currently outstanding */
-
- cpu_new.pll = pll ? *pll : cpu_cur.pll;
-
- if (pll)
- freqs.pll_changing = 1;
-
- /* update our frequencies */
-
- cpu_new.freq.armclk = target_freq;
- cpu_new.freq.fclk = cpu_new.pll.frequency;
-
- if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
- printk(KERN_ERR "no divisors for %d\n", target_freq);
- goto err_notpossible;
- }
-
- s3c_freq_dbg("%s: got divs\n", __func__);
-
- s3c_cpufreq_calc(&cpu_new);
-
- s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
-
- if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
- if (s3c_cpufreq_calcio(&cpu_new) < 0) {
- printk(KERN_ERR "%s: no IO timings\n", __func__);
- goto err_notpossible;
- }
- }
-
- s3c_cpufreq_show("new", &cpu_new);
-
- /* setup our cpufreq parameters */
-
- freqs.old = cpu_cur.freq;
- freqs.new = cpu_new.freq;
-
- freqs.freqs.old = cpu_cur.freq.armclk / 1000;
- freqs.freqs.new = cpu_new.freq.armclk / 1000;
-
- /* update f/h/p clock settings before we issue the change
- * notification, so that drivers do not need to do anything
- * special if they want to recalculate on CPUFREQ_PRECHANGE. */
-
- s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
- s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
- s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
- s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
-
- /* start the frequency change */
- cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE);
-
- /* If hclk is staying the same, then we do not need to
- * re-write the IO or the refresh timings whilst we are changing
- * speed. */
-
- local_irq_save(flags);
-
- /* is our memory clock slowing down? */
- if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
- s3c_cpufreq_setrefresh(&cpu_new);
- s3c_cpufreq_setio(&cpu_new);
- }
-
- if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
- /* not changing PLL, just set the divisors */
-
- s3c_cpufreq_setdivs(&cpu_new);
- } else {
- if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
- /* slow the cpu down, then set divisors */
-
- s3c_cpufreq_setfvco(&cpu_new);
- s3c_cpufreq_setdivs(&cpu_new);
- } else {
- /* set the divisors, then speed up */
-
- s3c_cpufreq_setdivs(&cpu_new);
- s3c_cpufreq_setfvco(&cpu_new);
- }
- }
-
- /* did our memory clock speed up */
- if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
- s3c_cpufreq_setrefresh(&cpu_new);
- s3c_cpufreq_setio(&cpu_new);
- }
-
- /* update our current settings */
- cpu_cur = cpu_new;
-
- local_irq_restore(flags);
-
- /* notify everyone we've done this */
- cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE);
-
- s3c_freq_dbg("%s: finished\n", __func__);
- return 0;
-
- err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
- return -EINVAL;
-}
-
-/* s3c_cpufreq_target
- *
- * called by the cpufreq core to adjust the frequency that the CPU
- * is currently running at.
- */
-
-static int s3c_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_frequency_table *pll;
- unsigned int index;
-
- /* avoid repeated calls which cause a needless amout of duplicated
- * logging output (and CPU time as the calculation process is
- * done) */
- if (target_freq == last_target)
- return 0;
-
- last_target = target_freq;
-
- s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
- __func__, policy, target_freq, relation);
-
- if (ftab) {
- if (cpufreq_frequency_table_target(policy, ftab,
- target_freq, relation,
- &index)) {
- s3c_freq_dbg("%s: table failed\n", __func__);
- return -EINVAL;
- }
-
- s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
- target_freq, index, ftab[index].frequency);
- target_freq = ftab[index].frequency;
- }
-
- target_freq *= 1000; /* convert target to Hz */
-
- /* find the settings for our new frequency */
-
- if (!pll_reg || cpu_cur.lock_pll) {
- /* either we've not got any PLL values, or we've locked
- * to the current one. */
- pll = NULL;
- } else {
- struct cpufreq_policy tmp_policy;
- int ret;
-
- /* we keep the cpu pll table in Hz, to ensure we get an
- * accurate value for the PLL output. */
-
- tmp_policy.min = policy->min * 1000;
- tmp_policy.max = policy->max * 1000;
- tmp_policy.cpu = policy->cpu;
-
- /* cpufreq_frequency_table_target uses a pointer to 'index'
- * which is the number of the table entry, not the value of
- * the table entry's index field. */
-
- ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
- target_freq, relation,
- &index);
-
- if (ret < 0) {
- printk(KERN_ERR "%s: no PLL available\n", __func__);
- goto err_notpossible;
- }
-
- pll = pll_reg + index;
-
- s3c_freq_dbg("%s: target %u => %u\n",
- __func__, target_freq, pll->frequency);
-
- target_freq = pll->frequency;
- }
-
- return s3c_cpufreq_settarget(policy, target_freq, pll);
-
- err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
- return -EINVAL;
-}
-
-static unsigned int s3c_cpufreq_get(unsigned int cpu)
-{
- return clk_get_rate(clk_arm) / 1000;
-}
-
-struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
-{
- struct clk *clk;
-
- clk = clk_get(dev, name);
- if (IS_ERR(clk))
- printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
-
- return clk;
-}
-
-static int s3c_cpufreq_init(struct cpufreq_policy *policy)
-{
- printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->cur = s3c_cpufreq_get(0);
- policy->min = policy->cpuinfo.min_freq = 0;
- policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
- /* feed the latency information from the cpu driver */
- policy->cpuinfo.transition_latency = cpu_cur.info->latency;
-
- if (ftab)
- cpufreq_frequency_table_cpuinfo(policy, ftab);
-
- return 0;
-}
-
-static __init int s3c_cpufreq_initclks(void)
-{
- _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
- _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
- clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
- clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
- clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
- clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
-
- if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
- IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
- printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
- return -ENOENT;
- }
-
- printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
- clk_get_rate(clk_fclk) / 1000,
- clk_get_rate(clk_hclk) / 1000,
- clk_get_rate(clk_pclk) / 1000,
- clk_get_rate(clk_arm) / 1000);
-
- return 0;
-}
-
-static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static struct cpufreq_frequency_table suspend_pll;
-static unsigned int suspend_freq;
-
-static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
-{
- suspend_pll.frequency = clk_get_rate(_clk_mpll);
- suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
- suspend_freq = s3c_cpufreq_get(0) * 1000;
-
- return 0;
-}
-
-static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
-{
- int ret;
-
- s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
-
- last_target = ~0; /* invalidate last_target setting */
-
- /* first, find out what speed we resumed at. */
- s3c_cpufreq_resume_clocks();
-
- /* whilst we will be called later on, we try and re-set the
- * cpu frequencies as soon as possible so that we do not end
- * up resuming devices and then immediately having to re-set
- * a number of settings once these devices have restarted.
- *
- * as a note, it is expected devices are not used until they
- * have been un-suspended and at that time they should have
- * used the updated clock settings.
- */
-
- ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
- if (ret) {
- printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
- return ret;
- }
-
- return 0;
-}
-#else
-#define s3c_cpufreq_resume NULL
-#define s3c_cpufreq_suspend NULL
-#endif
-
-static struct cpufreq_driver s3c24xx_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = s3c_cpufreq_verify,
- .target = s3c_cpufreq_target,
- .get = s3c_cpufreq_get,
- .init = s3c_cpufreq_init,
- .suspend = s3c_cpufreq_suspend,
- .resume = s3c_cpufreq_resume,
- .name = "s3c24xx",
-};
-
-
-int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
-{
- if (!info || !info->name) {
- printk(KERN_ERR "%s: failed to pass valid information\n",
- __func__);
- return -EINVAL;
- }
-
- printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
- info->name);
-
- /* check our driver info has valid data */
-
- BUG_ON(info->set_refresh == NULL);
- BUG_ON(info->set_divs == NULL);
- BUG_ON(info->calc_divs == NULL);
-
- /* info->set_fvco is optional, depending on whether there
- * is a need to set the clock code. */
-
- cpu_cur.info = info;
-
- /* Note, driver registering should probably update locktime */
-
- return 0;
-}
-
-int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
- struct s3c_cpufreq_board *ours;
-
- if (!board) {
- printk(KERN_INFO "%s: no board data\n", __func__);
- return -EINVAL;
- }
-
- /* Copy the board information so that each board can make this
- * initdata. */
-
- ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
- if (ours == NULL) {
- printk(KERN_ERR "%s: no memory\n", __func__);
- return -ENOMEM;
- }
-
- *ours = *board;
- cpu_cur.board = ours;
-
- return 0;
-}
-
-int __init s3c_cpufreq_auto_io(void)
-{
- int ret;
-
- if (!cpu_cur.info->get_iotiming) {
- printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
- return -ENOENT;
- }
-
- printk(KERN_INFO "%s: working out IO settings\n", __func__);
-
- ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
- if (ret)
- printk(KERN_ERR "%s: failed to get timings\n", __func__);
-
- return ret;
-}
-
-/* if one or is zero, then return the other, otherwise return the min */
-#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
-
-/**
- * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
- * @dst: The destination structure
- * @a: One argument.
- * @b: The other argument.
- *
- * Create a minimum of each frequency entry in the 'struct s3c_freq',
- * unless the entry is zero when it is ignored and the non-zero argument
- * used.
- */
-static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
- struct s3c_freq *a, struct s3c_freq *b)
-{
- dst->fclk = do_min(a->fclk, b->fclk);
- dst->hclk = do_min(a->hclk, b->hclk);
- dst->pclk = do_min(a->pclk, b->pclk);
- dst->armclk = do_min(a->armclk, b->armclk);
-}
-
-static inline u32 calc_locktime(u32 freq, u32 time_us)
-{
- u32 result;
-
- result = freq * time_us;
- result = DIV_ROUND_UP(result, 1000 * 1000);
-
- return result;
-}
-
-static void s3c_cpufreq_update_loctkime(void)
-{
- unsigned int bits = cpu_cur.info->locktime_bits;
- u32 rate = (u32)clk_get_rate(_clk_xtal);
- u32 val;
-
- if (bits == 0) {
- WARN_ON(1);
- return;
- }
-
- val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
- val |= calc_locktime(rate, cpu_cur.info->locktime_m);
-
- printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
- __raw_writel(val, S3C2410_LOCKTIME);
-}
-
-static int s3c_cpufreq_build_freq(void)
-{
- int size, ret;
-
- if (!cpu_cur.info->calc_freqtable)
- return -EINVAL;
-
- kfree(ftab);
- ftab = NULL;
-
- size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
- size++;
-
- ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
- if (!ftab) {
- printk(KERN_ERR "%s: no memory for tables\n", __func__);
- return -ENOMEM;
- }
-
- ftab_size = size;
-
- ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
- s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
-
- return 0;
-}
-
-static int __init s3c_cpufreq_initcall(void)
-{
- int ret = 0;
-
- if (cpu_cur.info && cpu_cur.board) {
- ret = s3c_cpufreq_initclks();
- if (ret)
- goto out;
-
- /* get current settings */
- s3c_cpufreq_getcur(&cpu_cur);
- s3c_cpufreq_show("cur", &cpu_cur);
-
- if (cpu_cur.board->auto_io) {
- ret = s3c_cpufreq_auto_io();
- if (ret) {
- printk(KERN_ERR "%s: failed to get io timing\n",
- __func__);
- goto out;
- }
- }
-
- if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
- printk(KERN_ERR "%s: no IO support registered\n",
- __func__);
- ret = -EINVAL;
- goto out;
- }
-
- if (!cpu_cur.info->need_pll)
- cpu_cur.lock_pll = 1;
-
- s3c_cpufreq_update_loctkime();
-
- s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
- &cpu_cur.info->max);
-
- if (cpu_cur.info->calc_freqtable)
- s3c_cpufreq_build_freq();
-
- ret = cpufreq_register_driver(&s3c24xx_driver);
- }
-
- out:
- return ret;
-}
-
-late_initcall(s3c_cpufreq_initcall);
-
-/**
- * s3c_plltab_register - register CPU PLL table.
- * @plls: The list of PLL entries.
- * @plls_no: The size of the PLL entries @plls.
- *
- * Register the given set of PLLs with the system.
- */
-int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
- unsigned int plls_no)
-{
- struct cpufreq_frequency_table *vals;
- unsigned int size;
-
- size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
-
- vals = kmalloc(size, GFP_KERNEL);
- if (vals) {
- memcpy(vals, plls, size);
- pll_reg = vals;
-
- /* write a terminating entry, we don't store it in the
- * table that is stored in the kernel */
- vals += plls_no;
- vals->frequency = CPUFREQ_TABLE_END;
-
- printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
- } else
- printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
-
- return vals ? 0 : -ENOMEM;
-}
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
index 548ced42cbb7..548ced42cbb7 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.h
+++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 663436d9db01..bd064c05c473 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -31,7 +31,7 @@
#include <plat/cpu-freq-core.h>
#include <plat/clock.h>
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
#define print_ns(x) ((x) / 10), ((x) % 10)
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index aba9e5692958..bfe443daf4b0 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -21,28 +21,14 @@
static struct stedma40_chan_cfg msp0_dma_rx = {
.high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
};
static struct stedma40_chan_cfg msp0_dma_tx = {
.high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
};
struct msp_i2s_platform_data msp0_platform_data = {
@@ -53,28 +39,14 @@ struct msp_i2s_platform_data msp0_platform_data = {
static struct stedma40_chan_cfg msp1_dma_rx = {
.high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV30_MSP3,
};
static struct stedma40_chan_cfg msp1_dma_tx = {
.high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV30_MSP1,
};
struct msp_i2s_platform_data msp1_platform_data = {
@@ -85,32 +57,16 @@ struct msp_i2s_platform_data msp1_platform_data = {
static struct stedma40_chan_cfg msp2_dma_rx = {
.high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
- .src_info.psize = STEDMA40_PSIZE_LOG_1,
- .dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
- /* data_width is set during configuration */
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV14_MSP2,
};
static struct stedma40_chan_cfg msp2_dma_tx = {
.high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV14_MSP2,
.use_fixed_channel = true,
.phy_channel = 1,
-
- /* data_width is set during configuration */
};
static struct platform_device *db8500_add_msp_i2s(struct device *parent,
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 43be3e0d4e30..b3e61a38e5c8 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -34,20 +34,14 @@
#ifdef CONFIG_STE_DMA40
struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV29_SD_MM0,
};
static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV29_SD_MM0,
};
#endif
@@ -89,20 +83,14 @@ void mop500_sdi_tc35892_init(struct device *parent)
#ifdef CONFIG_STE_DMA40
static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV32_SD_MM1,
};
static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV32_SD_MM1,
};
#endif
@@ -127,20 +115,14 @@ struct mmci_platform_data mop500_sdi1_data = {
#ifdef CONFIG_STE_DMA40
struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV28_SD_MM2,
};
static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV28_SD_MM2,
};
#endif
@@ -169,20 +151,14 @@ struct mmci_platform_data mop500_sdi2_data = {
#ifdef CONFIG_STE_DMA40
struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV42_SD_MM4,
};
static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV42_SD_MM4,
};
#endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 78389de94dde..df5d27a532e9 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -413,47 +413,23 @@ static void mop500_prox_deactivate(struct device *dev)
regulator_put(prox_regulator);
}
-void mop500_snowball_ethernet_clock_enable(void)
-{
- struct clk *clk;
-
- clk = clk_get_sys("fsmc", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-}
-
static struct cryp_platform_data u8500_cryp1_platform_data = {
.mem_to_engine = {
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV48_CAC1_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV48_CAC1,
.mode = STEDMA40_MODE_LOGICAL,
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
},
.engine_to_mem = {
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV48_CAC1_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV48_CAC1,
.mode = STEDMA40_MODE_LOGICAL,
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
}
};
static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV50_HAC1_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV50_HAC1_TX,
.mode = STEDMA40_MODE_LOGICAL,
- .src_info.psize = STEDMA40_PSIZE_LOG_16,
- .dst_info.psize = STEDMA40_PSIZE_LOG_16,
};
static struct hash_platform_data u8500_hash1_platform_data = {
@@ -470,20 +446,14 @@ static struct platform_device *mop500_platform_devs[] __initdata = {
#ifdef CONFIG_STE_DMA40
static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV8_SSP0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV8_SSP0,
};
static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV8_SSP0,
};
#endif
@@ -511,56 +481,38 @@ static void __init mop500_spi_init(struct device *parent)
#ifdef CONFIG_STE_DMA40
static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV13_UART0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV13_UART0,
};
static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV13_UART0,
};
static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV12_UART1_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV12_UART1,
};
static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV12_UART1,
};
static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV11_UART2_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV11_UART2,
};
static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV11_UART2,
};
#endif
@@ -674,7 +626,7 @@ static void __init snowball_init_machine(void)
mop500_audio_init(parent);
mop500_uart_init(parent);
- mop500_snowball_ethernet_clock_enable();
+ u8500_cryp1_hash1_init(parent);
/* This board has full regulator constraints */
regulator_has_full_constraints();
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 49514b825034..d6fab166cbf1 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -93,6 +93,7 @@ extern struct amba_pl011_data uart0_plat;
extern struct amba_pl011_data uart1_plat;
extern struct amba_pl011_data uart2_plat;
extern struct pl022_ssp_controller ssp0_plat;
+extern struct stedma40_platform_data dma40_plat_data;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
@@ -104,7 +105,6 @@ void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
-void mop500_snowball_ethernet_clock_enable(void);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7669a49fb6fb..12eee8167525 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -162,26 +162,15 @@ static void __init db8500_add_gpios(struct device *parent)
dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
}
-static int usb_db8500_rx_dma_cfg[] = {
- DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
- DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
- DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
- DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
- DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
- DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
- DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
- DB8500_DMA_DEV39_USB_OTG_IEP_8
-};
-
-static int usb_db8500_tx_dma_cfg[] = {
- DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
- DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
- DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
- DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
- DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
- DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
- DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
- DB8500_DMA_DEV39_USB_OTG_OEP_8
+static int usb_db8500_dma_cfg[] = {
+ DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
+ DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
+ DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
+ DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
+ DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
+ DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
+ DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
+ DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
};
static const char *db8500_read_soc_id(void)
@@ -215,7 +204,7 @@ struct device * __init u8500_init_devices(void)
db8500_add_rtc(parent);
db8500_add_gpios(parent);
- db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+ db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
@@ -226,34 +215,13 @@ struct device * __init u8500_init_devices(void)
}
#ifdef CONFIG_MACH_UX500_DT
-
-/* TODO: Once all pieces are DT:ed, remove completely. */
-static struct device * __init u8500_of_init_devices(void)
-{
- struct device *parent = db8500_soc_device_init();
-
- db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
-
- u8500_dma40_device.dev.parent = parent;
-
- /*
- * Devices to be DT:ed:
- * u8500_dma40_device = todo
- * db8500_pmu_device = done
- * db8500_prcmu_device = done
- */
- platform_device_register(&u8500_dma40_device);
-
- return parent;
-}
-
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
@@ -294,6 +262,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
"ux500-msp-i2s.2", &msp2_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
+ /* Requires clock name bindings and channel address lookup table. */
+ OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
{},
};
@@ -317,22 +287,18 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
static void __init u8500_init_machine(void)
{
- struct device *parent = NULL;
+ struct device *parent = db8500_soc_device_init();
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pinmaps_init();
- mop500_snowball_ethernet_clock_enable();
} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */
- /* TODO: Export SoC, USB, cpu-freq and DMA40 */
- parent = u8500_of_init_devices();
-
/* automatically probe child nodes of dbx5x0 devices */
if (of_machine_is_compatible("st-ericsson,u8540"))
of_platform_populate(NULL, u8500_local_bus_nodes,
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index ddbdcda8306a..516a6f57d159 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -42,128 +42,7 @@ static struct resource dma40_resources[] = {
}
};
-/* Default configuration for physcial memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
- .mode = STEDMA40_MODE_PHYSICAL,
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_PHY_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_PHY_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-/* Default configuration for logical memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_log = {
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_LOG_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_LOG_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between destination event lines and physical device address.
- * The event line is tied to a device and therefore the address is constant.
- * When the address comes from a primecell it will be configured in runtime
- * and we set the address to -1 as a placeholder.
- */
-static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
- /* MUSB - these will be runtime-reconfigured */
- [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
- [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
- [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
- [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
- [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
- [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
- [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
- [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
- /* PrimeCells - run-time configured */
- [DB8500_DMA_DEV0_SPI0_TX] = -1,
- [DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
- [DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
- [DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
- [DB8500_DMA_DEV8_SSP0_TX] = -1,
- [DB8500_DMA_DEV9_SSP1_TX] = -1,
- [DB8500_DMA_DEV11_UART2_TX] = -1,
- [DB8500_DMA_DEV12_UART1_TX] = -1,
- [DB8500_DMA_DEV13_UART0_TX] = -1,
- [DB8500_DMA_DEV28_SD_MM2_TX] = -1,
- [DB8500_DMA_DEV29_SD_MM0_TX] = -1,
- [DB8500_DMA_DEV32_SD_MM1_TX] = -1,
- [DB8500_DMA_DEV33_SPI2_TX] = -1,
- [DB8500_DMA_DEV35_SPI1_TX] = -1,
- [DB8500_DMA_DEV40_SPI3_TX] = -1,
- [DB8500_DMA_DEV41_SD_MM3_TX] = -1,
- [DB8500_DMA_DEV42_SD_MM4_TX] = -1,
- [DB8500_DMA_DEV43_SD_MM5_TX] = -1,
- [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET,
- [DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET,
-};
-
-/* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
- /* MUSB - these will be runtime-reconfigured */
- [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
- [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
- [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
- [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
- [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
- [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
- [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
- [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
- /* PrimeCells */
- [DB8500_DMA_DEV0_SPI0_RX] = -1,
- [DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
- [DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
- [DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
- [DB8500_DMA_DEV8_SSP0_RX] = -1,
- [DB8500_DMA_DEV9_SSP1_RX] = -1,
- [DB8500_DMA_DEV11_UART2_RX] = -1,
- [DB8500_DMA_DEV12_UART1_RX] = -1,
- [DB8500_DMA_DEV13_UART0_RX] = -1,
- [DB8500_DMA_DEV28_SD_MM2_RX] = -1,
- [DB8500_DMA_DEV29_SD_MM0_RX] = -1,
- [DB8500_DMA_DEV32_SD_MM1_RX] = -1,
- [DB8500_DMA_DEV33_SPI2_RX] = -1,
- [DB8500_DMA_DEV35_SPI1_RX] = -1,
- [DB8500_DMA_DEV40_SPI3_RX] = -1,
- [DB8500_DMA_DEV41_SD_MM3_RX] = -1,
- [DB8500_DMA_DEV42_SD_MM4_RX] = -1,
- [DB8500_DMA_DEV43_SD_MM5_RX] = -1,
- [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
-};
-
-/* Reserved event lines for memcpy only */
-static int dma40_memcpy_event[] = {
- DB8500_DMA_MEMCPY_TX_0,
- DB8500_DMA_MEMCPY_TX_1,
- DB8500_DMA_MEMCPY_TX_2,
- DB8500_DMA_MEMCPY_TX_3,
- DB8500_DMA_MEMCPY_TX_4,
- DB8500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
- .dev_len = DB8500_DMA_NR_DEV,
- .dev_rx = dma40_rx_map,
- .dev_tx = dma40_tx_map,
- .memcpy = dma40_memcpy_event,
- .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
- .memcpy_conf_phy = &dma40_memcpy_conf_phy,
- .memcpy_conf_log = &dma40_memcpy_conf_log,
+struct stedma40_platform_data dma40_plat_data = {
.disabled_channels = {-1},
};
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
index a616419bea76..0296ae5b0fd9 100644
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -12,133 +12,74 @@
#define DB8500_DMA_NR_DEV 64
-enum dma_src_dev_type {
- DB8500_DMA_DEV0_SPI0_RX = 0,
- DB8500_DMA_DEV1_SD_MMC0_RX = 1,
- DB8500_DMA_DEV2_SD_MMC1_RX = 2,
- DB8500_DMA_DEV3_SD_MMC2_RX = 3,
- DB8500_DMA_DEV4_I2C1_RX = 4,
- DB8500_DMA_DEV5_I2C3_RX = 5,
- DB8500_DMA_DEV6_I2C2_RX = 6,
- DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
- DB8500_DMA_DEV8_SSP0_RX = 8,
- DB8500_DMA_DEV9_SSP1_RX = 9,
- DB8500_DMA_DEV10_MCDE_RX = 10,
- DB8500_DMA_DEV11_UART2_RX = 11,
- DB8500_DMA_DEV12_UART1_RX = 12,
- DB8500_DMA_DEV13_UART0_RX = 13,
- DB8500_DMA_DEV14_MSP2_RX = 14,
- DB8500_DMA_DEV15_I2C0_RX = 15,
- DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
- DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
- DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
- DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
- DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
- DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
- DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
- DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
- DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
- DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
- DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
- DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
- DB8500_DMA_DEV28_SD_MM2_RX = 28,
- DB8500_DMA_DEV29_SD_MM0_RX = 29,
- DB8500_DMA_DEV30_MSP1_RX = 30,
+/*
+ * Unless otherwise specified, all channels numbers are used for
+ * TX & RX, and can be used for either source or destination
+ * channels.
+ */
+enum dma_dev_type {
+ DB8500_DMA_DEV0_SPI0 = 0,
+ DB8500_DMA_DEV1_SD_MMC0 = 1,
+ DB8500_DMA_DEV2_SD_MMC1 = 2,
+ DB8500_DMA_DEV3_SD_MMC2 = 3,
+ DB8500_DMA_DEV4_I2C1 = 4,
+ DB8500_DMA_DEV5_I2C3 = 5,
+ DB8500_DMA_DEV6_I2C2 = 6,
+ DB8500_DMA_DEV7_I2C4 = 7, /* Only on V1 and later */
+ DB8500_DMA_DEV8_SSP0 = 8,
+ DB8500_DMA_DEV9_SSP1 = 9,
+ DB8500_DMA_DEV10_MCDE_RX = 10, /* RX only */
+ DB8500_DMA_DEV11_UART2 = 11,
+ DB8500_DMA_DEV12_UART1 = 12,
+ DB8500_DMA_DEV13_UART0 = 13,
+ DB8500_DMA_DEV14_MSP2 = 14,
+ DB8500_DMA_DEV15_I2C0 = 15,
+ DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16,
+ DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17,
+ DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18,
+ DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19,
+ DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20,
+ DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21,
+ DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22,
+ DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23,
+ DB8500_DMA_DEV24_SXA0 = 24,
+ DB8500_DMA_DEV25_SXA1 = 25,
+ DB8500_DMA_DEV26_SXA2 = 26,
+ DB8500_DMA_DEV27_SXA3 = 27,
+ DB8500_DMA_DEV28_SD_MM2 = 28,
+ DB8500_DMA_DEV29_SD_MM0 = 29,
+ DB8500_DMA_DEV30_MSP1 = 30,
/* On DB8500v2, MSP3 RX replaces MSP1 RX */
- DB8500_DMA_DEV30_MSP3_RX = 30,
- DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
- DB8500_DMA_DEV32_SD_MM1_RX = 32,
- DB8500_DMA_DEV33_SPI2_RX = 33,
- DB8500_DMA_DEV34_I2C3_RX2 = 34,
- DB8500_DMA_DEV35_SPI1_RX = 35,
- DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
- DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
- DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
- DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
- DB8500_DMA_DEV40_SPI3_RX = 40,
- DB8500_DMA_DEV41_SD_MM3_RX = 41,
- DB8500_DMA_DEV42_SD_MM4_RX = 42,
- DB8500_DMA_DEV43_SD_MM5_RX = 43,
- DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
- DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
- DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
- DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
- DB8500_DMA_DEV48_CAC1_RX = 48,
- /* 49, 50 and 51 are not used */
- DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
- DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
- DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
- DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
- /* 56, 57, 58, 59 and 60 are not used */
- DB8500_DMA_DEV61_CAC0_RX = 61,
- /* 62 and 63 are not used */
-};
-
-enum dma_dest_dev_type {
- DB8500_DMA_DEV0_SPI0_TX = 0,
- DB8500_DMA_DEV1_SD_MMC0_TX = 1,
- DB8500_DMA_DEV2_SD_MMC1_TX = 2,
- DB8500_DMA_DEV3_SD_MMC2_TX = 3,
- DB8500_DMA_DEV4_I2C1_TX = 4,
- DB8500_DMA_DEV5_I2C3_TX = 5,
- DB8500_DMA_DEV6_I2C2_TX = 6,
- DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
- DB8500_DMA_DEV8_SSP0_TX = 8,
- DB8500_DMA_DEV9_SSP1_TX = 9,
- /* 10 is not used*/
- DB8500_DMA_DEV11_UART2_TX = 11,
- DB8500_DMA_DEV12_UART1_TX = 12,
- DB8500_DMA_DEV13_UART0_TX = 13,
- DB8500_DMA_DEV14_MSP2_TX = 14,
- DB8500_DMA_DEV15_I2C0_TX = 15,
- DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
- DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
- DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
- DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
- DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
- DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
- DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
- DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
- DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
- DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
- DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
- DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
- DB8500_DMA_DEV28_SD_MM2_TX = 28,
- DB8500_DMA_DEV29_SD_MM0_TX = 29,
- DB8500_DMA_DEV30_MSP1_TX = 30,
- DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
- DB8500_DMA_DEV32_SD_MM1_TX = 32,
- DB8500_DMA_DEV33_SPI2_TX = 33,
- DB8500_DMA_DEV34_I2C3_TX2 = 34,
- DB8500_DMA_DEV35_SPI1_TX = 35,
- DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
- DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
- DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
- DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
- DB8500_DMA_DEV40_SPI3_TX = 40,
- DB8500_DMA_DEV41_SD_MM3_TX = 41,
- DB8500_DMA_DEV42_SD_MM4_TX = 42,
- DB8500_DMA_DEV43_SD_MM5_TX = 43,
- DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
- DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
- DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
- DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
- DB8500_DMA_DEV48_CAC1_TX = 48,
- DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
- DB8500_DMA_DEV50_HAC1_TX = 50,
- DB8500_DMA_MEMCPY_TX_0 = 51,
- DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
- DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
- DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
- DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
- DB8500_DMA_MEMCPY_TX_1 = 56,
- DB8500_DMA_MEMCPY_TX_2 = 57,
- DB8500_DMA_MEMCPY_TX_3 = 58,
- DB8500_DMA_MEMCPY_TX_4 = 59,
- DB8500_DMA_MEMCPY_TX_5 = 60,
- DB8500_DMA_DEV61_CAC0_TX = 61,
- DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
- DB8500_DMA_DEV63_HAC0_TX = 63,
+ DB8500_DMA_DEV30_MSP3 = 30,
+ DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31,
+ DB8500_DMA_DEV32_SD_MM1 = 32,
+ DB8500_DMA_DEV33_SPI2 = 33,
+ DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34,
+ DB8500_DMA_DEV35_SPI1 = 35,
+ DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36,
+ DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37,
+ DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38,
+ DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39,
+ DB8500_DMA_DEV40_SPI3 = 40,
+ DB8500_DMA_DEV41_SD_MM3 = 41,
+ DB8500_DMA_DEV42_SD_MM4 = 42,
+ DB8500_DMA_DEV43_SD_MM5 = 43,
+ DB8500_DMA_DEV44_SXA4 = 44,
+ DB8500_DMA_DEV45_SXA5 = 45,
+ DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46,
+ DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47,
+ DB8500_DMA_DEV48_CAC1 = 48,
+ DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, /* TX only */
+ DB8500_DMA_DEV50_HAC1_TX = 50, /* TX only */
+ DB8500_DMA_MEMCPY_TX_0 = 51, /* TX only */
+ DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52,
+ DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53,
+ DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54,
+ DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55,
+ /* 56 -> 60 are channels reserved for memcpy only */
+ DB8500_DMA_DEV61_CAC0 = 61,
+ DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, /* TX only */
+ DB8500_DMA_DEV63_HAC0_TX = 63, /* TX only */
};
#endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 2dfc72f7cd8a..b7bd8d3a5507 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -14,25 +14,15 @@
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
- .dir = STEDMA40_PERIPH_TO_MEM, \
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
- .src_info.data_width = STEDMA40_WORD_WIDTH, \
- .dst_info.data_width = STEDMA40_WORD_WIDTH, \
- .src_info.psize = STEDMA40_PSIZE_LOG_16, \
- .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+ .dir = DMA_DEV_TO_MEM, \
}
#define MUSB_DMA40_TX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
- .dir = STEDMA40_MEM_TO_PERIPH, \
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
- .src_info.data_width = STEDMA40_WORD_WIDTH, \
- .dst_info.data_width = STEDMA40_WORD_WIDTH, \
- .src_info.psize = STEDMA40_PSIZE_LOG_16, \
- .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+ .dir = DMA_MEM_TO_DEV, \
}
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
= {
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
@@ -44,7 +34,7 @@ static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
MUSB_DMA40_RX_CH
};
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
= {
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
@@ -56,7 +46,7 @@ static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
MUSB_DMA40_TX_CH,
};
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
+static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
&musb_dma_rx_ch[0],
&musb_dma_rx_ch[1],
&musb_dma_rx_ch[2],
@@ -67,7 +57,7 @@ static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
&musb_dma_rx_ch[7]
};
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
+static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
&musb_dma_tx_ch[0],
&musb_dma_tx_ch[1],
&musb_dma_tx_ch[2],
@@ -81,23 +71,11 @@ static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
static struct ux500_musb_board_data musb_board_data = {
.dma_rx_param_array = ux500_dma_rx_param_array,
.dma_tx_param_array = ux500_dma_tx_param_array,
- .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
- .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
.dma_filter = stedma40_filter,
};
-static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
-
-static struct musb_hdrc_config musb_hdrc_config = {
- .multipoint = true,
- .dyn_fifo = true,
- .num_eps = 16,
- .ram_bits = 16,
-};
-
static struct musb_hdrc_platform_data musb_platform_data = {
.mode = MUSB_OTG,
- .config = &musb_hdrc_config,
.board_data = &musb_board_data,
};
@@ -118,27 +96,26 @@ struct platform_device ux500_musb_device = {
.id = 0,
.dev = {
.platform_data = &musb_platform_data,
- .dma_mask = &ux500_musb_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(usb_resources),
.resource = usb_resources,
};
-static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
+static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
{
u32 idx;
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
- musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
+ musb_dma_rx_ch[idx].dev_type = dev_type[idx];
}
-static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
+static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
{
u32 idx;
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
- musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
+ musb_dma_tx_ch[idx].dev_type = dev_type[idx];
}
void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ce66eb9be481..f82bae2171eb 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -86,22 +86,6 @@ config OMAP_MUX_WARNINGS
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect OMAP_MUX for your product.
-config OMAP_MBOX_FWK
- tristate "Mailbox framework support"
- depends on ARCH_OMAP && !ARCH_MULTIPLATFORM
- help
- Say Y here if you want to use OMAP Mailbox framework support for
- DSP, IVA1.0 and IVA2 in OMAP1/2/3.
-
-config OMAP_MBOX_KFIFO_SIZE
- int "Mailbox kfifo default buffer size (bytes)"
- depends on OMAP_MBOX_FWK
- default 256
- help
- Specify the default size of mailbox's kfifo buffers (bytes).
- This can also be changed at runtime (via the mbox_kfifo_size
- module parameter).
-
config OMAP_IOMMU_IVA2
bool
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 31199417b56a..0b01b68fd033 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -17,6 +17,3 @@ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
-# OMAP mailbox framework
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
deleted file mode 100644
index cc3921e9059c..000000000000
--- a/arch/arm/plat-omap/include/plat/mailbox.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* mailbox.h */
-
-#ifndef MAILBOX_H
-#define MAILBOX_H
-
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/kfifo.h>
-
-typedef u32 mbox_msg_t;
-struct omap_mbox;
-
-typedef int __bitwise omap_mbox_irq_t;
-#define IRQ_TX ((__force omap_mbox_irq_t) 1)
-#define IRQ_RX ((__force omap_mbox_irq_t) 2)
-
-typedef int __bitwise omap_mbox_type_t;
-#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
-#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
-
-struct omap_mbox_ops {
- omap_mbox_type_t type;
- int (*startup)(struct omap_mbox *mbox);
- void (*shutdown)(struct omap_mbox *mbox);
- /* fifo */
- mbox_msg_t (*fifo_read)(struct omap_mbox *mbox);
- void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
- int (*fifo_empty)(struct omap_mbox *mbox);
- int (*fifo_full)(struct omap_mbox *mbox);
- /* irq */
- void (*enable_irq)(struct omap_mbox *mbox,
- omap_mbox_irq_t irq);
- void (*disable_irq)(struct omap_mbox *mbox,
- omap_mbox_irq_t irq);
- void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
- int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
- /* ctx */
- void (*save_ctx)(struct omap_mbox *mbox);
- void (*restore_ctx)(struct omap_mbox *mbox);
-};
-
-struct omap_mbox_queue {
- spinlock_t lock;
- struct kfifo fifo;
- struct work_struct work;
- struct tasklet_struct tasklet;
- struct omap_mbox *mbox;
- bool full;
-};
-
-struct omap_mbox {
- char *name;
- unsigned int irq;
- struct omap_mbox_queue *txq, *rxq;
- struct omap_mbox_ops *ops;
- struct device *dev;
- void *priv;
- int use_count;
- struct blocking_notifier_head notifier;
-};
-
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
-void omap_mbox_init_seq(struct omap_mbox *);
-
-struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
-void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
-
-int omap_mbox_register(struct device *parent, struct omap_mbox **);
-int omap_mbox_unregister(void);
-
-static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
-{
- if (!mbox->ops->save_ctx) {
- dev_err(mbox->dev, "%s:\tno save\n", __func__);
- return;
- }
-
- mbox->ops->save_ctx(mbox);
-}
-
-static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
-{
- if (!mbox->ops->restore_ctx) {
- dev_err(mbox->dev, "%s:\tno restore\n", __func__);
- return;
- }
-
- mbox->ops->restore_ctx(mbox);
-}
-
-static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
- omap_mbox_irq_t irq)
-{
- mbox->ops->enable_irq(mbox, irq);
-}
-
-static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
- omap_mbox_irq_t irq)
-{
- mbox->ops->disable_irq(mbox, irq);
-}
-
-#endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
deleted file mode 100644
index 42377ef9ea3d..000000000000
--- a/arch/arm/plat-omap/mailbox.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * OMAP mailbox driver
- *
- * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
- *
- * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/kfifo.h>
-#include <linux/err.h>
-#include <linux/notifier.h>
-#include <linux/module.h>
-
-#include <plat/mailbox.h>
-
-static struct omap_mbox **mboxes;
-
-static int mbox_configured;
-static DEFINE_MUTEX(mbox_configured_lock);
-
-static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE;
-module_param(mbox_kfifo_size, uint, S_IRUGO);
-MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)");
-
-/* Mailbox FIFO handle functions */
-static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_read(mbox);
-}
-static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- mbox->ops->fifo_write(mbox, msg);
-}
-static inline int mbox_fifo_empty(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_empty(mbox);
-}
-static inline int mbox_fifo_full(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_full(mbox);
-}
-
-/* Mailbox IRQ handle functions */
-static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- if (mbox->ops->ack_irq)
- mbox->ops->ack_irq(mbox, irq);
-}
-static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- return mbox->ops->is_irq(mbox, irq);
-}
-
-/*
- * message sender
- */
-static int __mbox_poll_for_space(struct omap_mbox *mbox)
-{
- int ret = 0, i = 1000;
-
- while (mbox_fifo_full(mbox)) {
- if (mbox->ops->type == OMAP_MBOX_TYPE2)
- return -1;
- if (--i == 0)
- return -1;
- udelay(1);
- }
- return ret;
-}
-
-int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- struct omap_mbox_queue *mq = mbox->txq;
- int ret = 0, len;
-
- spin_lock_bh(&mq->lock);
-
- if (kfifo_avail(&mq->fifo) < sizeof(msg)) {
- ret = -ENOMEM;
- goto out;
- }
-
- if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) {
- mbox_fifo_write(mbox, msg);
- goto out;
- }
-
- len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
- WARN_ON(len != sizeof(msg));
-
- tasklet_schedule(&mbox->txq->tasklet);
-
-out:
- spin_unlock_bh(&mq->lock);
- return ret;
-}
-EXPORT_SYMBOL(omap_mbox_msg_send);
-
-static void mbox_tx_tasklet(unsigned long tx_data)
-{
- struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
- struct omap_mbox_queue *mq = mbox->txq;
- mbox_msg_t msg;
- int ret;
-
- while (kfifo_len(&mq->fifo)) {
- if (__mbox_poll_for_space(mbox)) {
- omap_mbox_enable_irq(mbox, IRQ_TX);
- break;
- }
-
- ret = kfifo_out(&mq->fifo, (unsigned char *)&msg,
- sizeof(msg));
- WARN_ON(ret != sizeof(msg));
-
- mbox_fifo_write(mbox, msg);
- }
-}
-
-/*
- * Message receiver(workqueue)
- */
-static void mbox_rx_work(struct work_struct *work)
-{
- struct omap_mbox_queue *mq =
- container_of(work, struct omap_mbox_queue, work);
- mbox_msg_t msg;
- int len;
-
- while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
- len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
- WARN_ON(len != sizeof(msg));
-
- blocking_notifier_call_chain(&mq->mbox->notifier, len,
- (void *)msg);
- spin_lock_irq(&mq->lock);
- if (mq->full) {
- mq->full = false;
- omap_mbox_enable_irq(mq->mbox, IRQ_RX);
- }
- spin_unlock_irq(&mq->lock);
- }
-}
-
-/*
- * Mailbox interrupt handler
- */
-static void __mbox_tx_interrupt(struct omap_mbox *mbox)
-{
- omap_mbox_disable_irq(mbox, IRQ_TX);
- ack_mbox_irq(mbox, IRQ_TX);
- tasklet_schedule(&mbox->txq->tasklet);
-}
-
-static void __mbox_rx_interrupt(struct omap_mbox *mbox)
-{
- struct omap_mbox_queue *mq = mbox->rxq;
- mbox_msg_t msg;
- int len;
-
- while (!mbox_fifo_empty(mbox)) {
- if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
- omap_mbox_disable_irq(mbox, IRQ_RX);
- mq->full = true;
- goto nomem;
- }
-
- msg = mbox_fifo_read(mbox);
-
- len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
- WARN_ON(len != sizeof(msg));
-
- if (mbox->ops->type == OMAP_MBOX_TYPE1)
- break;
- }
-
- /* no more messages in the fifo. clear IRQ source. */
- ack_mbox_irq(mbox, IRQ_RX);
-nomem:
- schedule_work(&mbox->rxq->work);
-}
-
-static irqreturn_t mbox_interrupt(int irq, void *p)
-{
- struct omap_mbox *mbox = p;
-
- if (is_mbox_irq(mbox, IRQ_TX))
- __mbox_tx_interrupt(mbox);
-
- if (is_mbox_irq(mbox, IRQ_RX))
- __mbox_rx_interrupt(mbox);
-
- return IRQ_HANDLED;
-}
-
-static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
- void (*work) (struct work_struct *),
- void (*tasklet)(unsigned long))
-{
- struct omap_mbox_queue *mq;
-
- mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL);
- if (!mq)
- return NULL;
-
- spin_lock_init(&mq->lock);
-
- if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL))
- goto error;
-
- if (work)
- INIT_WORK(&mq->work, work);
-
- if (tasklet)
- tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox);
- return mq;
-error:
- kfree(mq);
- return NULL;
-}
-
-static void mbox_queue_free(struct omap_mbox_queue *q)
-{
- kfifo_free(&q->fifo);
- kfree(q);
-}
-
-static int omap_mbox_startup(struct omap_mbox *mbox)
-{
- int ret = 0;
- struct omap_mbox_queue *mq;
-
- mutex_lock(&mbox_configured_lock);
- if (!mbox_configured++) {
- if (likely(mbox->ops->startup)) {
- ret = mbox->ops->startup(mbox);
- if (unlikely(ret))
- goto fail_startup;
- } else
- goto fail_startup;
- }
-
- if (!mbox->use_count++) {
- ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
- mbox->name, mbox);
- if (unlikely(ret)) {
- pr_err("failed to register mailbox interrupt:%d\n",
- ret);
- goto fail_request_irq;
- }
- mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
- if (!mq) {
- ret = -ENOMEM;
- goto fail_alloc_txq;
- }
- mbox->txq = mq;
-
- mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
- if (!mq) {
- ret = -ENOMEM;
- goto fail_alloc_rxq;
- }
- mbox->rxq = mq;
- mq->mbox = mbox;
-
- omap_mbox_enable_irq(mbox, IRQ_RX);
- }
- mutex_unlock(&mbox_configured_lock);
- return 0;
-
-fail_alloc_rxq:
- mbox_queue_free(mbox->txq);
-fail_alloc_txq:
- free_irq(mbox->irq, mbox);
-fail_request_irq:
- if (mbox->ops->shutdown)
- mbox->ops->shutdown(mbox);
- mbox->use_count--;
-fail_startup:
- mbox_configured--;
- mutex_unlock(&mbox_configured_lock);
- return ret;
-}
-
-static void omap_mbox_fini(struct omap_mbox *mbox)
-{
- mutex_lock(&mbox_configured_lock);
-
- if (!--mbox->use_count) {
- omap_mbox_disable_irq(mbox, IRQ_RX);
- free_irq(mbox->irq, mbox);
- tasklet_kill(&mbox->txq->tasklet);
- flush_work(&mbox->rxq->work);
- mbox_queue_free(mbox->txq);
- mbox_queue_free(mbox->rxq);
- }
-
- if (likely(mbox->ops->shutdown)) {
- if (!--mbox_configured)
- mbox->ops->shutdown(mbox);
- }
-
- mutex_unlock(&mbox_configured_lock);
-}
-
-struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
-{
- struct omap_mbox *_mbox, *mbox = NULL;
- int i, ret;
-
- if (!mboxes)
- return ERR_PTR(-EINVAL);
-
- for (i = 0; (_mbox = mboxes[i]); i++) {
- if (!strcmp(_mbox->name, name)) {
- mbox = _mbox;
- break;
- }
- }
-
- if (!mbox)
- return ERR_PTR(-ENOENT);
-
- if (nb)
- blocking_notifier_chain_register(&mbox->notifier, nb);
-
- ret = omap_mbox_startup(mbox);
- if (ret) {
- blocking_notifier_chain_unregister(&mbox->notifier, nb);
- return ERR_PTR(-ENODEV);
- }
-
- return mbox;
-}
-EXPORT_SYMBOL(omap_mbox_get);
-
-void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb)
-{
- blocking_notifier_chain_unregister(&mbox->notifier, nb);
- omap_mbox_fini(mbox);
-}
-EXPORT_SYMBOL(omap_mbox_put);
-
-static struct class omap_mbox_class = { .name = "mbox", };
-
-int omap_mbox_register(struct device *parent, struct omap_mbox **list)
-{
- int ret;
- int i;
-
- mboxes = list;
- if (!mboxes)
- return -EINVAL;
-
- for (i = 0; mboxes[i]; i++) {
- struct omap_mbox *mbox = mboxes[i];
- mbox->dev = device_create(&omap_mbox_class,
- parent, 0, mbox, "%s", mbox->name);
- if (IS_ERR(mbox->dev)) {
- ret = PTR_ERR(mbox->dev);
- goto err_out;
- }
-
- BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier);
- }
- return 0;
-
-err_out:
- while (i--)
- device_unregister(mboxes[i]->dev);
- return ret;
-}
-EXPORT_SYMBOL(omap_mbox_register);
-
-int omap_mbox_unregister(void)
-{
- int i;
-
- if (!mboxes)
- return -EINVAL;
-
- for (i = 0; mboxes[i]; i++)
- device_unregister(mboxes[i]->dev);
- mboxes = NULL;
- return 0;
-}
-EXPORT_SYMBOL(omap_mbox_unregister);
-
-static int __init omap_mbox_init(void)
-{
- int err;
-
- err = class_register(&omap_mbox_class);
- if (err)
- return err;
-
- /* kfifo size sanity check: alignment and minimal size */
- mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
- mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size,
- sizeof(mbox_msg_t));
-
- return 0;
-}
-subsys_initcall(omap_mbox_init);
-
-static void __exit omap_mbox_exit(void)
-{
- class_unregister(&omap_mbox_class);
-}
-module_exit(omap_mbox_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
-MODULE_AUTHOR("Toshihiro Kobayashi");
-MODULE_AUTHOR("Hiroshi DOYU");
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 95509d8eb140..d7e17150028a 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
#define s3c_cpufreq_debugfs_call(x) x
#else
#define s3c_cpufreq_debugfs_call(x) NULL
@@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
#define s3c2412_iotiming_set NULL
#endif /* CONFIG_S3C2412_IOTIMING */
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
#define s3c_freq_dbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
int index, size_t table_size,
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
index 80c4a809c721..85517ab962ae 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -126,7 +126,7 @@ struct s3c_cpufreq_board {
};
/* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
#define __init_or_cpufreq
#else
#define __init_or_cpufreq __init
@@ -134,7 +134,7 @@ struct s3c_cpufreq_board {
/* Board functions */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
#else
@@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
{
return 0;
}
-#endif /* CONFIG_CPU_FREQ_S3C */
+#endif /* CONFIG_ARM_S3C_CPUFREQ */