summaryrefslogtreecommitdiff
path: root/drivers/clk/ti
diff options
context:
space:
mode:
authorTero Kristo <t-kristo@ti.com>2015-11-30 16:43:25 +0200
committerStephen Boyd <sboyd@codeaurora.org>2015-11-30 11:34:17 -0800
commit07ff73a932b725b2a4675bd0cc1a86b4933e433e (patch)
treeda9e26ac88590535060e130e8ce51c4369a7c2a8 /drivers/clk/ti
parentcf81a1cf711d71daafe8f1b8eca96b54c3f5c8ed (diff)
clk: ti: omap5+: dpll: implement errata i810
Errata i810 states that DPLL controller can get stuck while transitioning to a power saving state, while its M/N ratio is being re-programmed. As a workaround, before re-programming the M/N ratio, SW has to ensure the DPLL cannot start an idle state transition. SW can disable DPLL idling by setting the DPLL AUTO_DPLL_MODE=0 or keeping a clock request active by setting a dependent clock domain in SW_WKUP. This errata impacts OMAP5 and DRA7 chips, so enable the errata for these. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Diffstat (limited to 'drivers/clk/ti')
-rw-r--r--drivers/clk/ti/dpll3xxx.c25
1 files changed, 24 insertions, 1 deletions
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
index f4dec00fb684..1c300388782b 100644
--- a/drivers/clk/ti/dpll3xxx.c
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -305,8 +305,9 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
{
struct dpll_data *dd = clk->dpll_data;
- u8 dco, sd_div;
+ u8 dco, sd_div, ai = 0;
u32 v;
+ bool errata_i810;
/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
_omap3_noncore_dpll_bypass(clk);
@@ -350,6 +351,25 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
v |= sd_div << __ffs(dd->sddiv_mask);
}
+ /*
+ * Errata i810 - DPLL controller can get stuck while transitioning
+ * to a power saving state. Software must ensure the DPLL can not
+ * transition to a low power state while changing M/N values.
+ * Easiest way to accomplish this is to prevent DPLL autoidle
+ * before doing the M/N re-program.
+ */
+ errata_i810 = ti_clk_get_features()->flags & TI_CLK_ERRATA_I810;
+
+ if (errata_i810) {
+ ai = omap3_dpll_autoidle_read(clk);
+ if (ai) {
+ omap3_dpll_deny_idle(clk);
+
+ /* OCP barrier */
+ omap3_dpll_autoidle_read(clk);
+ }
+ }
+
ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
/* Set 4X multiplier and low-power mode */
@@ -379,6 +399,9 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
_omap3_noncore_dpll_lock(clk);
+ if (errata_i810 && ai)
+ omap3_dpll_allow_idle(clk);
+
return 0;
}