md-cluster: fix no recovery job when adding/re-adding a disk

The commit db5e653d7c9f ("md: delay choosing sync action to
md_start_sync()") delays the start of the sync action. In a
clustered environment, this will cause another node to first
activate the spare disk and skip recovery. As a result, no
nodes will perform recovery when a disk is added or re-added.

Before db5e653d7c9f:

```
   node1                                node2
----------------------------------------------------------------
md_check_recovery
 + md_update_sb
 |  sendmsg: METADATA_UPDATED
 + md_choose_sync_action           process_metadata_update
 |  remove_and_add_spares           //node1 has not finished adding
 + call mddev->sync_work            //the spare disk:do nothing

md_start_sync
 starts md_do_sync

md_do_sync
 + grabbed resync_lockres:DLM_LOCK_EX
 + do syncing job

md_check_recovery
 sendmsg: METADATA_UPDATED
                                 process_metadata_update
                                   //activate spare disk

                                 ... ...

                                 md_do_sync
                                  waiting to grab resync_lockres:EX
```

After db5e653d7c9f:

(note: if 'cmd:idle' sets MD_RECOVERY_INTR after md_check_recovery
starts md_start_sync, setting the INTR action will exacerbate the
delay in node1 calling the md_do_sync function.)

```
   node1                                node2
----------------------------------------------------------------
md_check_recovery
 + md_update_sb
 |  sendmsg: METADATA_UPDATED
 + calls mddev->sync_work         process_metadata_update
                                   //node1 has not finished adding
                                   //the spare disk:do nothing

md_start_sync
 + md_choose_sync_action
 |  remove_and_add_spares
 + calls md_do_sync

md_check_recovery
 md_update_sb
  sendmsg: METADATA_UPDATED
                                  process_metadata_update
                                    //activate spare disk

  ... ...                         ... ...

                                  md_do_sync
                                   + grabbed resync_lockres:EX
                                   + raid1_sync_request skip sync under
				     conf->fullsync:0
md_do_sync
 1. waiting to grab resync_lockres:EX
 2. when node1 could grab EX lock,
    node1 will skip resync under recovery_offset:MaxSector
```

How to trigger:

```(commands @node1)
 # to easily watch the recovery status
echo 2000 > /proc/sys/dev/raid/speed_limit_max
ssh root@node2 "echo 2000 > /proc/sys/dev/raid/speed_limit_max"

mdadm -CR /dev/md0 -l1 -b clustered -n 2 /dev/sda /dev/sdb --assume-clean
ssh root@node2 mdadm -A /dev/md0 /dev/sda /dev/sdb
mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda
mdadm --manage /dev/md0 --add /dev/sdc

=== "cat /proc/mdstat" on both node, there are no recovery action. ===
```

How to fix:

because md layer code logic is hard to restore for speeding up sync job
on local node, we add new cluster msg to pending the another node to
active disk.

Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Acked-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240709104120.22243-2-heming.zhao@suse.com

0 files changed, 0 insertions, 0 deletions