drm/amd/pm: setup the framework to support Wifi RFI mitigation feature

With WBRF feature supported, as a driver responding to the frequencies,
amdgpu driver is able to do shadow pstate switching to mitigate possible
interference(between its (G-)DDR memory clocks and local radio module
frequency bands used by Wifi 6/6e/7).

--
v1->v2:
  - update the prompt for feature support(Lijo)
v8->v9:
  - update parameter document for smu_wbrf_event_handler(Simon)
v9->v10:
v10->v11:
 - correct the logics for wbrf range sorting(Lijo)
v13:
 - Fix the format issue (IIpo Jarvinen)

Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 17 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 8b33b130ea36..a194db09cde6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -208,6 +208,7 @@ int amdgpu_umsch_mm;
 int amdgpu_seamless = -1; /* auto */
 uint amdgpu_debug_mask;
 int amdgpu_agp = -1; /* auto */
+int amdgpu_wbrf = -1;
 
 static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work);
 
@@ -971,6 +972,22 @@ module_param_named(debug_mask, amdgpu_debug_mask, uint, 0444);
 MODULE_PARM_DESC(agp, "AGP (-1 = auto (default), 0 = disable, 1 = enable)");
 module_param_named(agp, amdgpu_agp, int, 0444);
 
+/**
+ * DOC: wbrf (int)
+ * Enable Wifi RFI interference mitigation feature.
+ * Due to electrical and mechanical constraints there may be likely interference of
+ * relatively high-powered harmonics of the (G-)DDR memory clocks with local radio
+ * module frequency bands used by Wifi 6/6e/7. To mitigate the possible RFI interference,
+ * with this feature enabled, PMFW will use either “shadowed P-State” or “P-State” based
+ * on active list of frequencies in-use (to be avoided) as part of initial setting or
+ * P-state transition. However, there may be potential performance impact with this
+ * feature enabled.
+ * (0 = disabled, 1 = enabled, -1 = auto (default setting, will be enabled if supported))
+ */
+MODULE_PARM_DESC(wbrf,
+	"Enable Wifi RFI interference mitigation (0 = disabled, 1 = enabled, -1 = auto(default)");
+module_param_named(wbrf, amdgpu_wbrf, int, 0444);
+
 /* These devices are not supported by amdgpu.
  * They are supported by the mach64, r128, radeon drivers
  */