Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 34 insertions, 23 deletions

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 47338a8200ed..bcdd4f28b64c 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1844,21 +1844,12 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 			DRM_ERROR("amdgpu: fail to register dmub aux callback");
 			goto error;
 		}
-		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true)) {
-			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
-			goto error;
-		}
-		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true)) {
-			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
-			goto error;
-		}
-	}
-
-	/* Enable outbox notification only after IRQ handlers are registered and DMUB is alive.
-	 * It is expected that DMUB will resend any pending notifications at this point, for
-	 * example HPD from DPIA.
-	 */
-	if (dc_is_dmub_outbox_supported(adev->dm.dc)) {
+		/* Enable outbox notification only after IRQ handlers are registered and DMUB is alive.
+		 * It is expected that DMUB will resend any pending notifications at this point. Note
+		 * that hpd and hpd_irq handler registration are deferred to register_hpd_handlers() to
+		 * align legacy interface initialization sequence. Connection status will be proactivly
+		 * detected once in the amdgpu_dm_initialize_drm_device.
+		 */
 		dc_enable_dmub_outbox(adev->dm.dc);
 
 		/* DPIA trace goes to dmesg logs only if outbox is enabled */
@@ -2298,6 +2289,7 @@ static int dm_sw_fini(void *handle)
 
 	if (adev->dm.dmub_srv) {
 		dmub_srv_destroy(adev->dm.dmub_srv);
+		kfree(adev->dm.dmub_srv);
 		adev->dm.dmub_srv = NULL;
 	}
 
@@ -3547,6 +3539,14 @@ static void register_hpd_handlers(struct amdgpu_device *adev)
 	int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT;
 	int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT;
 
+	if (dc_is_dmub_outbox_supported(adev->dm.dc)) {
+		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true))
+			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
+
+		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true))
+			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
+	}
+
 	list_for_each_entry(connector,
 			&dev->mode_config.connector_list, head)	{
 
@@ -3575,10 +3575,6 @@ static void register_hpd_handlers(struct amdgpu_device *adev)
 					handle_hpd_rx_irq,
 					(void *) aconnector);
 		}
-
-		if (adev->dm.hpd_rx_offload_wq)
-			adev->dm.hpd_rx_offload_wq[connector->index].aconnector =
-				aconnector;
 	}
 }
 
@@ -4590,6 +4586,10 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
 			goto fail;
 		}
 
+		if (dm->hpd_rx_offload_wq)
+			dm->hpd_rx_offload_wq[aconnector->base.index].aconnector =
+				aconnector;
+
 		if (!dc_link_detect_connection_type(link, &new_connection_type))
 			DRM_ERROR("KMS: Failed to detect connector\n");
 
@@ -6651,10 +6651,15 @@ amdgpu_dm_connector_late_register(struct drm_connector *connector)
 static void amdgpu_dm_connector_funcs_force(struct drm_connector *connector)
 {
 	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
-	struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector);
 	struct dc_link *dc_link = aconnector->dc_link;
 	struct dc_sink *dc_em_sink = aconnector->dc_em_sink;
 	struct edid *edid;
+	struct i2c_adapter *ddc;
+
+	if (dc_link->aux_mode)
+		ddc = &aconnector->dm_dp_aux.aux.ddc;
+	else
+		ddc = &aconnector->i2c->base;
 
 	/*
 	 * Note: drm_get_edid gets edid in the following order:
@@ -6662,7 +6667,7 @@ static void amdgpu_dm_connector_funcs_force(struct drm_connector *connector)
 	 * 2) firmware EDID if set via edid_firmware module parameter
 	 * 3) regular DDC read.
 	 */
-	edid = drm_get_edid(connector, &amdgpu_connector->ddc_bus->aux.ddc);
+	edid = drm_get_edid(connector, ddc);
 	if (!edid) {
 		DRM_ERROR("No EDID found on connector: %s.\n", connector->name);
 		return;
@@ -6703,12 +6708,18 @@ static int get_modes(struct drm_connector *connector)
 static void create_eml_sink(struct amdgpu_dm_connector *aconnector)
 {
 	struct drm_connector *connector = &aconnector->base;
-	struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(&aconnector->base);
+	struct dc_link *dc_link = aconnector->dc_link;
 	struct dc_sink_init_data init_params = {
 			.link = aconnector->dc_link,
 			.sink_signal = SIGNAL_TYPE_VIRTUAL
 	};
 	struct edid *edid;
+	struct i2c_adapter *ddc;
+
+	if (dc_link->aux_mode)
+		ddc = &aconnector->dm_dp_aux.aux.ddc;
+	else
+		ddc = &aconnector->i2c->base;
 
 	/*
 	 * Note: drm_get_edid gets edid in the following order:
@@ -6716,7 +6727,7 @@ static void create_eml_sink(struct amdgpu_dm_connector *aconnector)
 	 * 2) firmware EDID if set via edid_firmware module parameter
 	 * 3) regular DDC read.
 	 */
-	edid = drm_get_edid(connector, &amdgpu_connector->ddc_bus->aux.ddc);
+	edid = drm_get_edid(connector, ddc);
 	if (!edid) {
 		DRM_ERROR("No EDID found on connector: %s.\n", connector->name);
 		return;