drm/bridge: cdns-mhdp8546: Switch to common helpers to power up/down dp link

Use the common dp link power up/down helpers to avoid duplicating code.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

1 files changed, 2 insertions, 72 deletions

diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 96a983c970ea..b431e7efd1f0 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -546,76 +546,6 @@ out:
 }
 
 /**
- * cdns_mhdp_link_power_up() - power up a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-static
-int cdns_mhdp_link_power_up(struct drm_dp_aux *aux, struct cdns_mhdp_link *link)
-{
-	u8 value;
-	int err;
-
-	/* DP_SET_POWER register is only available on DPCD v1.1 and later */
-	if (link->revision < 0x11)
-		return 0;
-
-	err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
-	if (err < 0)
-		return err;
-
-	value &= ~DP_SET_POWER_MASK;
-	value |= DP_SET_POWER_D0;
-
-	err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
-	if (err < 0)
-		return err;
-
-	/*
-	 * According to the DP 1.1 specification, a "Sink Device must exit the
-	 * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
-	 * Control Field" (register 0x600).
-	 */
-	usleep_range(1000, 2000);
-
-	return 0;
-}
-
-/**
- * cdns_mhdp_link_power_down() - power down a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-static
-int cdns_mhdp_link_power_down(struct drm_dp_aux *aux,
-			      struct cdns_mhdp_link *link)
-{
-	u8 value;
-	int err;
-
-	/* DP_SET_POWER register is only available on DPCD v1.1 and later */
-	if (link->revision < 0x11)
-		return 0;
-
-	err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
-	if (err < 0)
-		return err;
-
-	value &= ~DP_SET_POWER_MASK;
-	value |= DP_SET_POWER_D3;
-
-	err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-/**
  * cdns_mhdp_link_configure() - configure a DisplayPort link
  * @aux: DisplayPort AUX channel
  * @link: pointer to a structure containing the link configuration
@@ -1453,7 +1383,7 @@ static int cdns_mhdp_link_up(struct cdns_mhdp_device *mhdp)
 		mhdp->link.capabilities |= DP_LINK_CAP_ENHANCED_FRAMING;
 
 	dev_dbg(mhdp->dev, "Set sink device power state via DPCD\n");
-	cdns_mhdp_link_power_up(&mhdp->aux, &mhdp->link);
+	drm_dp_link_power_up(&mhdp->aux, mhdp->link.revision);
 
 	cdns_mhdp_fill_sink_caps(mhdp, dpcd);
 
@@ -1500,7 +1430,7 @@ static void cdns_mhdp_link_down(struct cdns_mhdp_device *mhdp)
 	WARN_ON(!mutex_is_locked(&mhdp->link_mutex));
 
 	if (mhdp->plugged)
-		cdns_mhdp_link_power_down(&mhdp->aux, &mhdp->link);
+		drm_dp_link_power_down(&mhdp->aux, mhdp->link.revision);
 
 	mhdp->link_up = false;
 }