diff options
| author | Radhakrishna Sripada <radhakrishna.sripada@intel.com> | 2023-04-13 14:24:37 -0700 |
|---|---|---|
| committer | Radhakrishna Sripada <radhakrishna.sripada@intel.com> | 2023-04-14 08:12:40 -0700 |
| commit | 51390cc0e00a378b7c152bb6f63efc0a01b59d20 (patch) | |
| tree | 25fe924dbf6f54ad1ef2985a7fd3aea4974df004 /drivers/gpu/drm/i915/Makefile | |
| parent | a42e65f33c38e3b0191cf6a1bc8ebb6c8289127d (diff) | |
drm/i915/mtl: Add Support for C10 PHY message bus and pll programming
XELPDP has C10 and C20 phys from Synopsys to drive displays. Each phy
has a dedicated PIPE 5.2 Message bus for configuration. This message
bus is used to configure the phy internal registers.
XELPDP has C10 phys to drive output to the EDP and the native output
from the display engine. Add structures, programming hardware state
readout logic. Port clock calculations are similar to DG2. Use the DG2
formulae to calculate the port clock but use the relevant pll signals.
Note: PHY lane 0 is always used for PLL programming.
Add sequences for C10 phy enable/disable phy lane reset,
powerdown change sequence and phy lane programming.
Bspec: 64539, 64568, 64599, 65100, 65101, 65450, 65451, 67610, 67636
v2: Squash patches related to C10 phy message bus and pll
programming support (Jani)
Move register definitions to a new file i.e. intel_cx0_reg_defs.h (Jani)
Move macro definitions (Jani)
DP rates as separate patch (Jani)
Spin out xelpdp register definitions into a separate file (Jani)
Replace macro to select registers based on phy lane with
function calls (Jani)
Fix styling issues (Jani)
Call XELPDP_PORT_P2M_MSGBUS_STATUS() with port instead of phy (Lucas)
v3: Move clear request flag into try-loop
v4: On PHY idle change drm_err_once() as drm_dbg_kms() (Jani)
use __intel_de_wait_for_register() instead of __intel_wait_for_register
and uncomment intel_uncore.h (Jani)
Add DP-alt support for PHY lane programming (Khaled)
v4: Add tx and cmn on c10mpllb_state (Imre)
Add missing waits for pending transactions between two message bus
writes (Imre)
General cleanups and simplifications (Imre)
v5: Few nit cleanups from rev4 (imre)
s/dev_priv/i915/ , s/c10mpllb/c10pll/ (RK)
Rebase
v6: Move the mtl code from intel_c10pll_calc_port_clock to mtl function
Fix typo in comment for REG_FIELD_PREP8 definition(Imre)
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v4)
Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-4-radhakrishna.sripada@intel.com
Diffstat (limited to 'drivers/gpu/drm/i915/Makefile')
| -rw-r--r-- | drivers/gpu/drm/i915/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 97b0d4ae221a..4ee3b5850dd0 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -298,6 +298,7 @@ i915-y += \ display/icl_dsi.o \ display/intel_backlight.o \ display/intel_crt.o \ + display/intel_cx0_phy.o \ display/intel_ddi.o \ display/intel_ddi_buf_trans.o \ display/intel_display_trace.o \ |