drm/i915: Nuke dg2_ddi_pre_enable_dp()

dg2_ddi_pre_enable_dp() has outlived its usefulness so eliminate
it.

The one thing that tgl_ddi_pre_enable_dp() is missing that we
need is intel_ddi_config_transcoder_dp2(). So we'll bring that
over.

tgl_ddi_pre_enable_dp() does also have a few things that
dg2_ddi_pre_enable_dp() didn't have:
- icl_program_mg_dp_mode() -> nop due to intel_phy_is_tc()==false on DG2
- intel_ddi_power_up_lanes() -> nop due to intel_phy_is_combo()==false on DG2
- intel_ddi_mso_configure() -> only matters for MSO panels

Another slight difference is that dg2_ddi_pre_enable_dp() was
missing a bigjoiner check around intel_dsc_enable(), which
tgl_ddi_pre_enable_dp() does have.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119122150.12941-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

1 files changed, 4 insertions, 113 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 4e93eac926a5..2f20abc5122d 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -2289,116 +2289,6 @@ static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state)
 		     OVERLAP_PIXELS_MASK, dss1);
 }
 
-static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state,
-				  struct intel_encoder *encoder,
-				  const struct intel_crtc_state *crtc_state,
-				  const struct drm_connector_state *conn_state)
-{
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
-	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-
-	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
-				 crtc_state->lane_count);
-
-	/*
-	 * We only configure what the register value will be here.  Actual
-	 * enabling happens during link training farther down.
-	 */
-	intel_ddi_init_dp_buf_reg(encoder, crtc_state);
-
-	/*
-	 * 1. Enable Power Wells
-	 *
-	 * This was handled at the beginning of intel_atomic_commit_tail(),
-	 * before we called down into this function.
-	 */
-
-	/* 2. Enable Panel Power if PPS is required */
-	intel_pps_on(intel_dp);
-
-	/*
-	 * 3. Enable the port PLL.
-	 */
-	intel_ddi_enable_clock(encoder, crtc_state);
-
-	/* 4. Enable IO power */
-	if (!intel_tc_port_in_tbt_alt_mode(dig_port))
-		dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv,
-								   dig_port->ddi_io_power_domain);
-
-	/*
-	 * 5. The rest of the below are substeps under the bspec's "Enable and
-	 * Train Display Port" step.  Note that steps that are specific to
-	 * MST will be handled by intel_mst_pre_enable_dp() before/after it
-	 * calls into this function.  Also intel_mst_pre_enable_dp() only calls
-	 * us when active_mst_links==0, so any steps designated for "single
-	 * stream or multi-stream master transcoder" can just be performed
-	 * unconditionally here.
-	 */
-
-	/*
-	 * 5.a Configure Transcoder Clock Select to direct the Port clock to the
-	 * Transcoder.
-	 */
-	intel_ddi_enable_pipe_clock(encoder, crtc_state);
-
-	/* 5.b Configure transcoder for DP 2.0 128b/132b */
-	intel_ddi_config_transcoder_dp2(encoder, crtc_state);
-
-	/*
-	 * 5.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
-	 * Transport Select
-	 */
-	intel_ddi_config_transcoder_func(encoder, crtc_state);
-
-	/*
-	 * 5.d Configure & enable DP_TP_CTL with link training pattern 1
-	 * selected
-	 *
-	 * This will be handled by the intel_dp_start_link_train() farther
-	 * down this function.
-	 */
-
-	/* 5.e Configure voltage swing and related IO settings */
-	encoder->set_signal_levels(encoder, crtc_state);
-
-	if (!is_mst)
-		intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
-
-	intel_dp_configure_protocol_converter(intel_dp, crtc_state);
-	intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true);
-	/*
-	 * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit
-	 * in the FEC_CONFIGURATION register to 1 before initiating link
-	 * training
-	 */
-	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
-	intel_dp_check_frl_training(intel_dp);
-	intel_dp_pcon_dsc_configure(intel_dp, crtc_state);
-
-	/*
-	 * 5.h Follow DisplayPort specification training sequence (see notes for
-	 *     failure handling)
-	 * 5.i If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle
-	 *     Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent)
-	 *     (timeout after 800 us)
-	 */
-	intel_dp_start_link_train(intel_dp, crtc_state);
-
-	/* 5.j Set DP_TP_CTL link training to Normal */
-	if (!is_trans_port_sync_mode(crtc_state))
-		intel_dp_stop_link_train(intel_dp, crtc_state);
-
-	/* 5.k Configure and enable FEC if needed */
-	intel_ddi_enable_fec(encoder, crtc_state);
-
-	intel_dsc_dp_pps_write(encoder, crtc_state);
-
-	intel_dsc_enable(crtc_state);
-}
-
 static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
@@ -2472,6 +2362,9 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 */
 	intel_ddi_enable_pipe_clock(encoder, crtc_state);
 
+	if (HAS_DP20(dev_priv))
+		intel_ddi_config_transcoder_dp2(encoder, crtc_state);
+
 	/*
 	 * 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
 	 * Transport Select
@@ -2612,9 +2505,7 @@ static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 
-	if (IS_DG2(dev_priv))
-		dg2_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
-	else if (DISPLAY_VER(dev_priv) >= 12)
+	if (DISPLAY_VER(dev_priv) >= 12)
 		tgl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
 	else
 		hsw_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);