drm/vc4: crtc: Add support for BCM2712 PixelValves

The PixelValves found on the BCM2712 are similar to the ones found in
the previous generation.

Compared to BCM2711:
- the pixelvalves only drive one HDMI controller each
- HDMI1 PixelValve has a FIFO long enough to support 4k at 60Hz
- support has been added for odd horizontal timings whilst at 2pixels/clock

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025-drm-vc4-2712-support-v2-11-35efa83c8fc0@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

1 files changed, 47 insertions, 2 deletions

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 53bca104d0d5..bfa25efa5db2 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -240,6 +240,11 @@ static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
 	const struct vc4_crtc_data *crtc_data = vc4_crtc_to_vc4_crtc_data(vc4_crtc);
 	const struct vc4_pv_data *pv_data = vc4_crtc_to_vc4_pv_data(vc4_crtc);
 	struct vc4_dev *vc4 = to_vc4_dev(vc4_crtc->base.dev);
+
+	/*
+	 * NOTE: Could we use register 0x68 (PV_HW_CFG1) to get the FIFO
+	 * size?
+	 */
 	u32 fifo_len_bytes = pv_data->fifo_depth;
 
 	/*
@@ -421,6 +426,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc, struct drm_encoder *encode
 		 */
 		CRTC_WRITE(PV_V_CONTROL,
 			   PV_VCONTROL_CONTINUOUS |
+			   (vc4->gen >= VC4_GEN_6_C ? PV_VCONTROL_ODD_TIMING : 0) |
 			   (is_dsi ? PV_VCONTROL_DSI : 0) |
 			   PV_VCONTROL_INTERLACE |
 			   (odd_field_first
@@ -432,6 +438,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc, struct drm_encoder *encode
 	} else {
 		CRTC_WRITE(PV_V_CONTROL,
 			   PV_VCONTROL_CONTINUOUS |
+			   (vc4->gen >= VC4_GEN_6_C ? PV_VCONTROL_ODD_TIMING : 0) |
 			   (is_dsi ? PV_VCONTROL_DSI : 0));
 		CRTC_WRITE(PV_VSYNCD_EVEN, 0);
 	}
@@ -446,11 +453,17 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc, struct drm_encoder *encode
 	if (is_dsi)
 		CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep);
 
-	if (vc4->gen == VC4_GEN_5)
+	if (vc4->gen >= VC4_GEN_5)
 		CRTC_WRITE(PV_MUX_CFG,
 			   VC4_SET_FIELD(PV_MUX_CFG_RGB_PIXEL_MUX_MODE_NO_SWAP,
 					 PV_MUX_CFG_RGB_PIXEL_MUX_MODE));
 
+	if (vc4->gen >= VC4_GEN_6_C)
+		CRTC_WRITE(PV_PIPE_INIT_CTRL,
+			   VC4_SET_FIELD(1, PV_PIPE_INIT_CTRL_PV_INIT_WIDTH) |
+			   VC4_SET_FIELD(1, PV_PIPE_INIT_CTRL_PV_INIT_IDLE) |
+			   PV_PIPE_INIT_CTRL_PV_INIT_EN);
+
 	CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR |
 		   vc4_crtc_get_fifo_full_level_bits(vc4_crtc, format) |
 		   VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
@@ -549,7 +562,11 @@ int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
 	if (!(of_device_is_compatible(vc4_crtc->pdev->dev.of_node,
 				      "brcm,bcm2711-pixelvalve2") ||
 	      of_device_is_compatible(vc4_crtc->pdev->dev.of_node,
-				      "brcm,bcm2711-pixelvalve4")))
+				      "brcm,bcm2711-pixelvalve4") ||
+	      of_device_is_compatible(vc4_crtc->pdev->dev.of_node,
+				      "brcm,bcm2712-pixelvalve0") ||
+	      of_device_is_compatible(vc4_crtc->pdev->dev.of_node,
+				      "brcm,bcm2712-pixelvalve1")))
 		return 0;
 
 	if (!(CRTC_READ(PV_CONTROL) & PV_CONTROL_EN))
@@ -1292,6 +1309,32 @@ const struct vc4_pv_data bcm2711_pv4_data = {
 	},
 };
 
+const struct vc4_pv_data bcm2712_pv0_data = {
+	.base = {
+		.debugfs_name = "crtc0_regs",
+		.hvs_available_channels = BIT(0),
+		.hvs_output = 0,
+	},
+	.fifo_depth = 64,
+	.pixels_per_clock = 1,
+	.encoder_types = {
+		[0] = VC4_ENCODER_TYPE_HDMI0,
+	},
+};
+
+const struct vc4_pv_data bcm2712_pv1_data = {
+	.base = {
+		.debugfs_name = "crtc1_regs",
+		.hvs_available_channels = BIT(1),
+		.hvs_output = 1,
+	},
+	.fifo_depth = 64,
+	.pixels_per_clock = 1,
+	.encoder_types = {
+		[0] = VC4_ENCODER_TYPE_HDMI1,
+	},
+};
+
 static const struct of_device_id vc4_crtc_dt_match[] = {
 	{ .compatible = "brcm,bcm2835-pixelvalve0", .data = &bcm2835_pv0_data },
 	{ .compatible = "brcm,bcm2835-pixelvalve1", .data = &bcm2835_pv1_data },
@@ -1301,6 +1344,8 @@ static const struct of_device_id vc4_crtc_dt_match[] = {
 	{ .compatible = "brcm,bcm2711-pixelvalve2", .data = &bcm2711_pv2_data },
 	{ .compatible = "brcm,bcm2711-pixelvalve3", .data = &bcm2711_pv3_data },
 	{ .compatible = "brcm,bcm2711-pixelvalve4", .data = &bcm2711_pv4_data },
+	{ .compatible = "brcm,bcm2712-pixelvalve0", .data = &bcm2712_pv0_data },
+	{ .compatible = "brcm,bcm2712-pixelvalve1", .data = &bcm2712_pv1_data },
 	{}
 };