summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pc87360.c
diff options
context:
space:
mode:
authorJim Cromie <jim.cromie@gmail.com>2008-10-18 20:27:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-20 08:52:35 -0700
commit28f74e71775b1ae0ebf7fe87f7a7f39ecb77a2b8 (patch)
tree906ab2c98ed3d9034a170a2fcf9948097a084eaa /drivers/hwmon/pc87360.c
parent4d235ba6c2e9c717da8facafd1b990dcb687d1e0 (diff)
hwmon/pc87360 separate alarm files: define some constants
Bring hwmon/pc87360 into agreement with Documentation/hwmon/sysfs-interface. Patchset adds separate limit alarms for voltages and temps, it also adds temp[123]_fault files. On my Soekris, temps 1,2 are unused/unconnected, so temp[123]_fault = 1,1,0 respectively. This agrees with /usr/bin/sensors, which has always shown them as OPEN. Temps 4,5,6 are thermistor based, and dont have a fault bit in their status register. This patch: 2 different kinds of constants added: - CHAN_ALM_* constants for (later) vin, temp alarm callbacks. - CHAN_* conversion constants, used in _init_device, partly for RW1C bits Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/hwmon/pc87360.c')
-rw-r--r--drivers/hwmon/pc87360.c33
1 files changed, 22 insertions, 11 deletions
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 9b462bb13fa3..1043b116bded 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -489,6 +489,11 @@ static struct sensor_device_attribute in_max[] = {
SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10),
};
+/* (temp & vin) channel status register alarm bits (pdf sec.11.5.12) */
+#define CHAN_ALM_MIN 0x02 /* min limit crossed */
+#define CHAN_ALM_MAX 0x04 /* max limit exceeded */
+#define TEMP_ALM_CRIT 0x08 /* temp crit exceeded (temp only) */
+
#define VIN_UNIT_ATTRS(X) \
&in_input[X].dev_attr.attr, \
&in_status[X].dev_attr.attr, \
@@ -1131,6 +1136,12 @@ static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
mutex_unlock(&(data->lock));
}
+/* (temp & vin) channel conversion status register flags (pdf sec.11.5.12) */
+#define CHAN_CNVRTD 0x80 /* new data ready */
+#define CHAN_ENA 0x01 /* enabled channel (temp or vin) */
+#define CHAN_ALM_ENA 0x10 /* propagate to alarms-reg ?? (chk val!) */
+#define CHAN_READY (CHAN_ENA|CHAN_CNVRTD) /* sample ready mask */
+
static void pc87360_init_device(struct platform_device *pdev,
int use_thermistors)
{
@@ -1156,7 +1167,7 @@ static void pc87360_init_device(struct platform_device *pdev,
/* Forcibly enable voltage channel */
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
- if (!(reg & 0x01)) {
+ if (!(reg & CHAN_ENA)) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling in%d\n", i);
pc87360_write_value(data, LD_IN, i,
@@ -1171,7 +1182,7 @@ static void pc87360_init_device(struct platform_device *pdev,
for (i = 11; i < data->innr; i++) {
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_TEMP_STATUS);
- use_thermistors = use_thermistors || (reg & 0x01);
+ use_thermistors = use_thermistors || (reg & CHAN_ENA);
}
i = use_thermistors ? 2 : 0;
@@ -1180,7 +1191,7 @@ static void pc87360_init_device(struct platform_device *pdev,
/* Forcibly enable temperature channel */
reg = pc87360_read_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS);
- if (!(reg & 0x01)) {
+ if (!(reg & CHAN_ENA)) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling temp%d\n", i+1);
pc87360_write_value(data, LD_TEMP, i,
@@ -1197,7 +1208,7 @@ static void pc87360_init_device(struct platform_device *pdev,
diodes */
reg = pc87360_read_value(data, LD_TEMP,
(i-11)/2, PC87365_REG_TEMP_STATUS);
- if (reg & 0x01) {
+ if (reg & CHAN_ENA) {
dev_dbg(&pdev->dev, "Skipping "
"temp%d, pin already in use "
"by temp%d\n", i-7, (i-11)/2);
@@ -1207,7 +1218,7 @@ static void pc87360_init_device(struct platform_device *pdev,
/* Forcibly enable thermistor channel */
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
- if (!(reg & 0x01)) {
+ if (!(reg & CHAN_ENA)) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling temp%d\n", i-7);
pc87360_write_value(data, LD_IN, i,
@@ -1221,7 +1232,7 @@ static void pc87360_init_device(struct platform_device *pdev,
if (data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONFIG);
- if (reg & 0x01) {
+ if (reg & CHAN_ENA) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling monitoring (VLM)\n");
pc87360_write_value(data, LD_IN, NO_BANK,
@@ -1233,7 +1244,7 @@ static void pc87360_init_device(struct platform_device *pdev,
if (data->tempnr) {
reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
PC87365_REG_TEMP_CONFIG);
- if (reg & 0x01) {
+ if (reg & CHAN_ENA) {
dev_dbg(&pdev->dev, "Forcibly enabling "
"monitoring (TMS)\n");
pc87360_write_value(data, LD_TEMP, NO_BANK,
@@ -1336,11 +1347,11 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
pc87360_write_value(data, LD_IN, i,
PC87365_REG_IN_STATUS,
data->in_status[i]);
- if ((data->in_status[i] & 0x81) == 0x81) {
+ if ((data->in_status[i] & CHAN_READY) == CHAN_READY) {
data->in[i] = pc87360_read_value(data, LD_IN,
i, PC87365_REG_IN);
}
- if (data->in_status[i] & 0x01) {
+ if (data->in_status[i] & CHAN_ENA) {
data->in_min[i] = pc87360_read_value(data,
LD_IN, i,
PC87365_REG_IN_MIN);
@@ -1373,12 +1384,12 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
pc87360_write_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS,
data->temp_status[i]);
- if ((data->temp_status[i] & 0x81) == 0x81) {
+ if ((data->temp_status[i] & CHAN_READY) == CHAN_READY) {
data->temp[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP);
}
- if (data->temp_status[i] & 0x01) {
+ if (data->temp_status[i] & CHAN_ENA) {
data->temp_min[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP_MIN);