Merge tag 'iio-for-4.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st round of IIO new device support, features and cleanups in the 4.20 cycle.

There is a merge commit in here to pull in regmap support for repeatedly
reading the same register (to read out FIFOs).  Used by the adxl372 driver.
This will find uses elsewhere once we tidy up various drivers that are
effectively doing this and relying on not enabling regcache.

New device support
* Analog devices ADXL372 accelerometer
  - new driver for this accelerometer including fifo and and interrupt support.
    Follow up patches enforce trigger validation, add sampling frequency
    control and filter bandwidth control.  A later series added i2c support
    to the existing SPI support.
* ST lsm6dsx
  - rework and add support fo the LSM6DSO 6 axis mems sensor.
* Linear LTC 1660 DAC
  - new driver supporting the LTC 1660 and LTC 1665 SPI DACs.
* Microchip mcp3911 ADC.
  - new driver for this integrated analog front end and ADC.
* Qualcomm SPMI PMIC5 adc driver
  - using the spmi framework, new driver and bindings for this ADC.
    Follow up patch adds some missing channels.

Features
* ad5758
  - support hard reset using a gpio (if provided).
* mpu6050
  - Regulator support
* qcom-spmi-adc5
  - Sanity check the channel numbers provided by DT to make sure the
    driver actually knows about them.
* sc27xx
  - give raw data for channel 20 as it's used on all known boards for
    the headset which needs a custom converstion function.  If it turns
    out someone builds a board where this isn't true we will deal with it
    when it happens.
  - add ADC scale calibration.
* tsl2772
  - support device tree binding to set the proximity led settings.
  - regulator supprot.
  - binding for apds9930 - trivial addition as register compatible with tsl2772.

Cleanups / Minor fixes

* adxl345
  - supress a static checker warning but explicitly checking if the id
    object is null.
* bh1750
  - avoid CONFIG_PM_SLEEP checks.
  - SPDX.
* bme680
  - spelling mistake
  - use clamp rather than open coding.
  - white space and other similar fixes.
  - rename MSK to MASK for clarifty and use GENMASK to specify them.
  - use the FIELD_GET macro rather than a very odd accessor of dividing by
    16 to get the shift.
  - rework to share handing for oversampling of the various channels in a
    unified way.
  - check explicitly for val2 in write_raw function to ensure it is 0.
  - drop some field defines that don't add anything.
* dpot-adc
  - SPDX
* envelope detector
  - SPDX
* isl29501
  - fix an ancient compiler warning mostly because it results in much
    nicer code.
* max30102
  - mark switch fall throughs.
* max44000
  - drop an unused variable.
* max512
  - avoid CONFIG_PM_SLEEP checks.
* max5481
  - use of_device_get_match_data rather than open coding it.
* max5821
  - avoid CONFIG_PM_SLEEP checks.
* max9611
  - explicity cast an enum to an integer to make it totally clear that
    this is intended.
* mcp4018
  - fix an inconsistent MODULE_LICENSE.
  - use of_device_get_match_data rather than open coding it.
* mcp4531
  - use of_device_get_match_data rather than open coding it.
  - SPDX
* mcp4725
  - avoid CONFIG_PM_SLEEP checks.
* mcp4922
  - Fix error handling and prevent writing a negative to when setting the
    output voltage.
* ms5611
  - drop deprecated compatible strings without manufacturer from being
    explicitly listed.  They are handled anyway.
  - SPDX
* multiplexer
  - SPDX
* qcom-vadc
  - fix inconsistent documentation for reg.
* ti-dac5571
  - provide and of_match_table.

* treewide
  - update Michael Hennerich's email address.
  - Use %pOFn rather than device_node.name.
* documentation.
  - tidy up a wrong kernel version for the introduction of the
    position_relative ABI.

1 files changed, 54 insertions, 0 deletions

diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
index 1d5354ff5c72..bbb1fa02b382 100644
--- a/drivers/iio/adc/qcom-vadc-common.h
+++ b/drivers/iio/adc/qcom-vadc-common.h
@@ -25,15 +25,31 @@
 
 #define VADC_DECIMATION_MIN			512
 #define VADC_DECIMATION_MAX			4096
+#define ADC5_DEF_VBAT_PRESCALING		1 /* 1:3 */
+#define ADC5_DECIMATION_SHORT			250
+#define ADC5_DECIMATION_MEDIUM			420
+#define ADC5_DECIMATION_LONG			840
+/* Default decimation - 1024 for rev2, 840 for pmic5 */
+#define ADC5_DECIMATION_DEFAULT			2
+#define ADC5_DECIMATION_SAMPLES_MAX		3
 
 #define VADC_HW_SETTLE_DELAY_MAX		10000
+#define VADC_HW_SETTLE_SAMPLES_MAX		16
 #define VADC_AVG_SAMPLES_MAX			512
+#define ADC5_AVG_SAMPLES_MAX			16
 
 #define KELVINMIL_CELSIUSMIL			273150
+#define PMIC5_CHG_TEMP_SCALE_FACTOR		377500
+#define PMIC5_SMB_TEMP_CONSTANT			419400
+#define PMIC5_SMB_TEMP_SCALE_FACTOR		356
 
 #define PMI_CHG_SCALE_1				-138890
 #define PMI_CHG_SCALE_2				391750000000LL
 
+#define VADC5_MAX_CODE				0x7fff
+#define ADC5_FULL_SCALE_CODE			0x70e4
+#define ADC5_USR_DATA_CHECK			0x8000
+
 /**
  * struct vadc_map_pt - Map the graph representation for ADC channel
  * @x: Represent the ADC digitized code.
@@ -89,6 +105,18 @@ struct vadc_prescale_ratio {
  * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade.
  * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC.
  * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp
+ * SCALE_HW_CALIB_DEFAULT: Default scaling to convert raw adc code to
+ *	voltage (uV) with hardware applied offset/slope values to adc code.
+ * SCALE_HW_CALIB_THERM_100K_PULLUP: Returns temperature in millidegC using
+ *	lookup table. The hardware applies offset/slope to adc code.
+ * SCALE_HW_CALIB_XOTHERM: Returns XO thermistor voltage in millidegC using
+ *	100k pullup. The hardware applies offset/slope to adc code.
+ * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade.
+ *	The hardware applies offset/slope to adc code.
+ * SCALE_HW_CALIB_PM5_CHG_TEMP: Returns result in millidegrees for PMIC5
+ *	charger temperature.
+ * SCALE_HW_CALIB_PM5_SMB_TEMP: Returns result in millidegrees for PMIC5
+ *	SMB1390 temperature.
  */
 enum vadc_scale_fn_type {
 	SCALE_DEFAULT = 0,
@@ -96,6 +124,22 @@ enum vadc_scale_fn_type {
 	SCALE_PMIC_THERM,
 	SCALE_XOTHERM,
 	SCALE_PMI_CHG_TEMP,
+	SCALE_HW_CALIB_DEFAULT,
+	SCALE_HW_CALIB_THERM_100K_PULLUP,
+	SCALE_HW_CALIB_XOTHERM,
+	SCALE_HW_CALIB_PMIC_THERM,
+	SCALE_HW_CALIB_PM5_CHG_TEMP,
+	SCALE_HW_CALIB_PM5_SMB_TEMP,
+	SCALE_HW_CALIB_INVALID,
+};
+
+struct adc5_data {
+	const u32	full_scale_code_volt;
+	const u32	full_scale_code_cur;
+	const struct adc5_channels *adc_chans;
+	unsigned int	*decimation;
+	unsigned int	*hw_settle_1;
+	unsigned int	*hw_settle_2;
 };
 
 int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
@@ -104,6 +148,16 @@ int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
 		    bool absolute,
 		    u16 adc_code, int *result_mdec);
 
+struct qcom_adc5_scale_type {
+	int (*scale_fn)(const struct vadc_prescale_ratio *prescale,
+		const struct adc5_data *data, u16 adc_code, int *result);
+};
+
+int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
+		    const struct vadc_prescale_ratio *prescale,
+		    const struct adc5_data *data,
+		    u16 adc_code, int *result_mdec);
+
 int qcom_vadc_decimation_from_dt(u32 value);
 
 #endif /* QCOM_VADC_COMMON_H */