diff options
| author | Marek Vasut <marex@denx.de> | 2021-10-16 21:39:53 -0700 |
|---|---|---|
| committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2021-10-16 22:29:35 -0700 |
| commit | c6ac8f0b4ca927316eb40e1e9ba83df5d29f3793 (patch) | |
| tree | 5446f8a9c171b0c73a7400e1806beab12313ac09 /drivers/input/touchscreen/Kconfig | |
| parent | 70a7681db0c9266bd0a3fd6c90a5cfa20ac44995 (diff) | |
Input: ili210x - add ili251x firmware update support
The ili251x firmware can be updated, this is used when switching between
different modes of operation of the touch surface, e.g. glove operation.
This patch implements the firmware update mechanism triggered by a write
into an sysfs attribute.
The firmware itself is distributed as an intel hex file with non-standard
types. The first two lines are of type 0xad, which indicates the start of
DataFlash payload, that is always at address 0xf000 on the ili251x, so it
can be dropped, and 0xac which indicates the position of firmware info in
the Application payload, that is always at address 0x2020 on the ili251x
and we do not care. The rest of the firmware is data of type 0x00, and we
care about that. To convert the firmware hex file into something usable
by the kernel, remove the first two lines and then use ihex2fw:
$ tail -n +3 input.hex > temp.hex
$ ./tools/firmware/ihex2fw temp.hex firmware/ilitek/ili251x.bin
To trigger the firmware update, place firmware file ilitek/ili251x.bin
into /lib/firmware/, write into firmware_update sysfs attribute and wait
about 30-40 seconds. The firmware update is slow. Afterward, verify the
firmware_version and mode sysfs attributes to check whether the firmware
got updated and the controller switched back to application (AP) mode by
reading out 'mode' attribute in sysfs.
Note that the content of firmware_version, e.g. 0600.0005.abcd.aa04 can
be matched to the content of the firmware hex file. The first four bytes,
0x06 0x00 0x00 0x05 can be found at ^:102030 00 05000006, the next four
bytes 0xab 0xcd 0xaa 0x04 at ^:10F000 00 nnnnnnnn ABCDAA04.
Note that the protocol differs considerably between the ili2xxx devices,
this patch therefore implements this functionality only for ili251x that
I can test.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20210831202506.181927-3-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'drivers/input/touchscreen/Kconfig')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index d4e74738c5a8..2f6adfb7b938 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -425,6 +425,7 @@ config TOUCHSCREEN_HYCON_HY46XX config TOUCHSCREEN_ILI210X tristate "Ilitek ILI210X based touchscreen" depends on I2C + select CRC_CCITT help Say Y here if you have a ILI210X based touchscreen controller. This driver supports models ILI2102, |