Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

1 files changed, 0 insertions, 3756 deletions

diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
deleted file mode 100644
index 43700fc19a31..000000000000
--- a/drivers/isdn/i4l/isdn_tty.c
+++ /dev/null
@@ -1,3756 +0,0 @@
-/*
- * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
- *
- * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
- * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-#undef ISDN_TTY_STAT_DEBUG
-
-#include <linux/isdn.h>
-#include <linux/serial.h> /* ASYNC_* flags */
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/sched/signal.h>
-#include "isdn_common.h"
-#include "isdn_tty.h"
-#ifdef CONFIG_ISDN_AUDIO
-#include "isdn_audio.h"
-#define VBUF 0x3e0
-#define VBUFX (VBUF/16)
-#endif
-
-#define FIX_FILE_TRANSFER
-#define	DUMMY_HAYES_AT
-
-/* Prototypes */
-
-static DEFINE_MUTEX(modem_info_mutex);
-static int isdn_tty_edit_at(const char *, int, modem_info *);
-static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *);
-static void isdn_tty_modem_reset_regs(modem_info *, int);
-static void isdn_tty_cmd_ATA(modem_info *);
-static void isdn_tty_flush_buffer(struct tty_struct *);
-static void isdn_tty_modem_result(int, modem_info *);
-#ifdef CONFIG_ISDN_AUDIO
-static int isdn_tty_countDLE(unsigned char *, int);
-#endif
-
-/* Leave this unchanged unless you know what you do! */
-#define MODEM_PARANOIA_CHECK
-#define MODEM_DO_RESTART
-
-static int bit2si[8] =
-{1, 5, 7, 7, 7, 7, 7, 7};
-static int si2bit[8] =
-{4, 1, 4, 4, 4, 4, 4, 4};
-
-/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
- * to stuff incoming data directly into a tty's flip-buffer. This
- * is done to speed up tty-receiving if the receive-queue is empty.
- * This routine MUST be called with interrupts off.
- * Return:
- *  1 = Success
- *  0 = Failure, data has to be buffered and later processed by
- *      isdn_tty_readmodem().
- */
-static int
-isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
-{
-	struct tty_port *port = &info->port;
-	int c;
-	int len;
-	char last;
-
-	if (!info->online)
-		return 0;
-
-	if (!(info->mcr & UART_MCR_RTS))
-		return 0;
-
-	len = skb->len
-#ifdef CONFIG_ISDN_AUDIO
-		+ ISDN_AUDIO_SKB_DLECOUNT(skb)
-#endif
-		;
-
-	c = tty_buffer_request_room(port, len);
-	if (c < len)
-		return 0;
-
-#ifdef CONFIG_ISDN_AUDIO
-	if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
-		int l = skb->len;
-		unsigned char *dp = skb->data;
-		while (--l) {
-			if (*dp == DLE)
-				tty_insert_flip_char(port, DLE, 0);
-			tty_insert_flip_char(port, *dp++, 0);
-		}
-		if (*dp == DLE)
-			tty_insert_flip_char(port, DLE, 0);
-		last = *dp;
-	} else {
-#endif
-		if (len > 1)
-			tty_insert_flip_string(port, skb->data, len - 1);
-		last = skb->data[len - 1];
-#ifdef CONFIG_ISDN_AUDIO
-	}
-#endif
-	if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
-		tty_insert_flip_char(port, last, 0xFF);
-	else
-		tty_insert_flip_char(port, last, TTY_NORMAL);
-	tty_flip_buffer_push(port);
-	kfree_skb(skb);
-
-	return 1;
-}
-
-/* isdn_tty_readmodem() is called periodically from within timer-interrupt.
- * It tries getting received data from the receive queue an stuff it into
- * the tty's flip-buffer.
- */
-void
-isdn_tty_readmodem(void)
-{
-	int resched = 0;
-	int midx;
-	int i;
-	int r;
-	modem_info *info;
-
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		midx = dev->m_idx[i];
-		if (midx < 0)
-			continue;
-
-		info = &dev->mdm.info[midx];
-		if (!info->online)
-			continue;
-
-		r = 0;
-#ifdef CONFIG_ISDN_AUDIO
-		isdn_audio_eval_dtmf(info);
-		if ((info->vonline & 1) && (info->emu.vpar[1]))
-			isdn_audio_eval_silence(info);
-#endif
-		if (info->mcr & UART_MCR_RTS) {
-			/* CISCO AsyncPPP Hack */
-			if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
-				r = isdn_readbchan_tty(info->isdn_driver,
-						info->isdn_channel,
-						&info->port, 0);
-			else
-				r = isdn_readbchan_tty(info->isdn_driver,
-						info->isdn_channel,
-						&info->port, 1);
-			if (r)
-				tty_flip_buffer_push(&info->port);
-		} else
-			r = 1;
-
-		if (r) {
-			info->rcvsched = 0;
-			resched = 1;
-		} else
-			info->rcvsched = 1;
-	}
-	if (!resched)
-		isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
-}
-
-int
-isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
-{
-	ulong flags;
-	int midx;
-#ifdef CONFIG_ISDN_AUDIO
-	int ifmt;
-#endif
-	modem_info *info;
-
-	if ((midx = dev->m_idx[i]) < 0) {
-		/* if midx is invalid, packet is not for tty */
-		return 0;
-	}
-	info = &dev->mdm.info[midx];
-#ifdef CONFIG_ISDN_AUDIO
-	ifmt = 1;
-
-	if ((info->vonline) && (!info->emu.vpar[4]))
-		isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt);
-	if ((info->vonline & 1) && (info->emu.vpar[1]))
-		isdn_audio_calc_silence(info, skb->data, skb->len, ifmt);
-#endif
-	if ((info->online < 2)
-#ifdef CONFIG_ISDN_AUDIO
-	    && (!(info->vonline & 1))
-#endif
-		) {
-		/* If Modem not listening, drop data */
-		kfree_skb(skb);
-		return 1;
-	}
-	if (info->emu.mdmreg[REG_T70] & BIT_T70) {
-		if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) {
-			/* T.70 decoding: throw away the T.70 header (2 or 4 bytes)   */
-			if (skb->data[0] == 3) /* pure data packet -> 4 byte headers  */
-				skb_pull(skb, 4);
-			else
-				if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr  */
-					skb_pull(skb, 2);
-		} else
-			/* T.70 decoding: Simply throw away the T.70 header (4 bytes) */
-			if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1)))
-				skb_pull(skb, 4);
-	}
-#ifdef CONFIG_ISDN_AUDIO
-	ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
-	ISDN_AUDIO_SKB_LOCK(skb) = 0;
-	if (info->vonline & 1) {
-		/* voice conversion/compression */
-		switch (info->emu.vpar[3]) {
-		case 2:
-		case 3:
-		case 4:
-			/* adpcm
-			 * Since compressed data takes less
-			 * space, we can overwrite the buffer.
-			 */
-			skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
-							    ifmt,
-							    skb->data,
-							    skb->data,
-							    skb->len));
-			break;
-		case 5:
-			/* a-law */
-			if (!ifmt)
-				isdn_audio_ulaw2alaw(skb->data, skb->len);
-			break;
-		case 6:
-			/* u-law */
-			if (ifmt)
-				isdn_audio_alaw2ulaw(skb->data, skb->len);
-			break;
-		}
-		ISDN_AUDIO_SKB_DLECOUNT(skb) =
-			isdn_tty_countDLE(skb->data, skb->len);
-	}
-#ifdef CONFIG_ISDN_TTY_FAX
-	else {
-		if (info->faxonline & 2) {
-			isdn_tty_fax_bitorder(info, skb);
-			ISDN_AUDIO_SKB_DLECOUNT(skb) =
-				isdn_tty_countDLE(skb->data, skb->len);
-		}
-	}
-#endif
-#endif
-	/* Try to deliver directly via tty-buf if queue is empty */
-	spin_lock_irqsave(&info->readlock, flags);
-	if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
-		if (isdn_tty_try_read(info, skb)) {
-			spin_unlock_irqrestore(&info->readlock, flags);
-			return 1;
-		}
-	/* Direct deliver failed or queue wasn't empty.
-	 * Queue up for later dequeueing via timer-irq.
-	 */
-	__skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb);
-	dev->drv[di]->rcvcount[channel] +=
-		(skb->len
-#ifdef CONFIG_ISDN_AUDIO
-		 + ISDN_AUDIO_SKB_DLECOUNT(skb)
-#endif
-			);
-	spin_unlock_irqrestore(&info->readlock, flags);
-	/* Schedule dequeuing */
-	if ((dev->modempoll) && (info->rcvsched))
-		isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
-	return 1;
-}
-
-static void
-isdn_tty_cleanup_xmit(modem_info *info)
-{
-	skb_queue_purge(&info->xmit_queue);
-#ifdef CONFIG_ISDN_AUDIO
-	skb_queue_purge(&info->dtmf_queue);
-#endif
-}
-
-static void
-isdn_tty_tint(modem_info *info)
-{
-	struct sk_buff *skb = skb_dequeue(&info->xmit_queue);
-	int len, slen;
-
-	if (!skb)
-		return;
-	len = skb->len;
-	if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
-					   info->isdn_channel, 1, skb)) == len) {
-		struct tty_struct *tty = info->port.tty;
-		info->send_outstanding++;
-		info->msr &= ~UART_MSR_CTS;
-		info->lsr &= ~UART_LSR_TEMT;
-		tty_wakeup(tty);
-		return;
-	}
-	if (slen < 0) {
-		/* Error: no channel, already shutdown, or wrong parameter */
-		dev_kfree_skb(skb);
-		return;
-	}
-	skb_queue_head(&info->xmit_queue, skb);
-}
-
-#ifdef CONFIG_ISDN_AUDIO
-static int
-isdn_tty_countDLE(unsigned char *buf, int len)
-{
-	int count = 0;
-
-	while (len--)
-		if (*buf++ == DLE)
-			count++;
-	return count;
-}
-
-/* This routine is called from within isdn_tty_write() to perform
- * DLE-decoding when sending audio-data.
- */
-static int
-isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
-{
-	unsigned char *p = &info->port.xmit_buf[info->xmit_count];
-	int count = 0;
-
-	while (len > 0) {
-		if (m->lastDLE) {
-			m->lastDLE = 0;
-			switch (*p) {
-			case DLE:
-				/* Escape code */
-				if (len > 1)
-					memmove(p, p + 1, len - 1);
-				p--;
-				count++;
-				break;
-			case ETX:
-				/* End of data */
-				info->vonline |= 4;
-				return count;
-			case DC4:
-				/* Abort RX */
-				info->vonline &= ~1;
-#ifdef ISDN_DEBUG_MODEM_VOICE
-				printk(KERN_DEBUG
-				       "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
-				       info->line);
-#endif
-				isdn_tty_at_cout("\020\003", info);
-				if (!info->vonline) {
-#ifdef ISDN_DEBUG_MODEM_VOICE
-					printk(KERN_DEBUG
-					       "DLEdown: send VCON on ttyI%d\n",
-					       info->line);
-#endif
-					isdn_tty_at_cout("\r\nVCON\r\n", info);
-				}
-				/* Fall through */
-			case 'q':
-			case 's':
-				/* Silence */
-				if (len > 1)
-					memmove(p, p + 1, len - 1);
-				p--;
-				break;
-			}
-		} else {
-			if (*p == DLE)
-				m->lastDLE = 1;
-			else
-				count++;
-		}
-		p++;
-		len--;
-	}
-	if (len < 0) {
-		printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n");
-		return 0;
-	}
-	return count;
-}
-
-/* This routine is called from within isdn_tty_write() when receiving
- * audio-data. It interrupts receiving, if an character other than
- * ^S or ^Q is sent.
- */
-static int
-isdn_tty_end_vrx(const char *buf, int c)
-{
-	char ch;
-
-	while (c--) {
-		ch = *buf;
-		if ((ch != 0x11) && (ch != 0x13))
-			return 1;
-		buf++;
-	}
-	return 0;
-}
-
-static int voice_cf[7] =
-{0, 0, 4, 3, 2, 0, 0};
-
-#endif                          /* CONFIG_ISDN_AUDIO */
-
-/* isdn_tty_senddown() is called either directly from within isdn_tty_write()
- * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls
- * outgoing data from the tty's xmit-buffer, handles voice-decompression or
- * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint.
- */
-static void
-isdn_tty_senddown(modem_info *info)
-{
-	int buflen;
-	int skb_res;
-#ifdef CONFIG_ISDN_AUDIO
-	int audio_len;
-#endif
-	struct sk_buff *skb;
-
-#ifdef CONFIG_ISDN_AUDIO
-	if (info->vonline & 4) {
-		info->vonline &= ~6;
-		if (!info->vonline) {
-#ifdef ISDN_DEBUG_MODEM_VOICE
-			printk(KERN_DEBUG
-			       "senddown: send VCON on ttyI%d\n",
-			       info->line);
-#endif
-			isdn_tty_at_cout("\r\nVCON\r\n", info);
-		}
-	}
-#endif
-	if (!(buflen = info->xmit_count))
-		return;
-	if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0)
-		info->msr &= ~UART_MSR_CTS;
-	info->lsr &= ~UART_LSR_TEMT;
-	/* info->xmit_count is modified here and in isdn_tty_write().
-	 * So we return here if isdn_tty_write() is in the
-	 * critical section.
-	 */
-	atomic_inc(&info->xmit_lock);
-	if (!(atomic_dec_and_test(&info->xmit_lock)))
-		return;
-	if (info->isdn_driver < 0) {
-		info->xmit_count = 0;
-		return;
-	}
-	skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4;
-#ifdef CONFIG_ISDN_AUDIO
-	if (info->vonline & 2)
-		audio_len = buflen * voice_cf[info->emu.vpar[3]];
-	else
-		audio_len = 0;
-	skb = dev_alloc_skb(skb_res + buflen + audio_len);
-#else
-	skb = dev_alloc_skb(skb_res + buflen);
-#endif
-	if (!skb) {
-		printk(KERN_WARNING
-		       "isdn_tty: Out of memory in ttyI%d senddown\n",
-		       info->line);
-		return;
-	}
-	skb_reserve(skb, skb_res);
-	skb_put_data(skb, info->port.xmit_buf, buflen);
-	info->xmit_count = 0;
-#ifdef CONFIG_ISDN_AUDIO
-	if (info->vonline & 2) {
-		/* For now, ifmt is fixed to 1 (alaw), since this
-		 * is used with ISDN everywhere in the world, except
-		 * US, Canada and Japan.
-		 * Later, when US-ISDN protocols are implemented,
-		 * this setting will depend on the D-channel protocol.
-		 */
-		int ifmt = 1;
-
-		/* voice conversion/decompression */
-		switch (info->emu.vpar[3]) {
-		case 2:
-		case 3:
-		case 4:
-			/* adpcm, compatible to ZyXel 1496 modem
-			 * with ROM revision 6.01
-			 */
-			audio_len = isdn_audio_adpcm2xlaw(info->adpcms,
-							  ifmt,
-							  skb->data,
-							  skb_put(skb, audio_len),
-							  buflen);
-			skb_pull(skb, buflen);
-			skb_trim(skb, audio_len);
-			break;
-		case 5:
-			/* a-law */
-			if (!ifmt)
-				isdn_audio_alaw2ulaw(skb->data,
-						     buflen);
-			break;
-		case 6:
-			/* u-law */
-			if (ifmt)
-				isdn_audio_ulaw2alaw(skb->data,
-						     buflen);
-			break;
-		}
-	}
-#endif                          /* CONFIG_ISDN_AUDIO */
-	if (info->emu.mdmreg[REG_T70] & BIT_T70) {
-		/* Add T.70 simplified header */
-		if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT)
-			memcpy(skb_push(skb, 2), "\1\0", 2);
-		else
-			memcpy(skb_push(skb, 4), "\1\0\1\0", 4);
-	}
-	skb_queue_tail(&info->xmit_queue, skb);
-}
-
-/************************************************************
- *
- * Modem-functions
- *
- * mostly "stolen" from original Linux-serial.c and friends.
- *
- ************************************************************/
-
-/* The next routine is called once from within timer-interrupt
- * triggered within isdn_tty_modem_ncarrier(). It calls
- * isdn_tty_modem_result() to stuff a "NO CARRIER" Message
- * into the tty's buffer.
- */
-static void
-isdn_tty_modem_do_ncarrier(struct timer_list *t)
-{
-	modem_info *info = from_timer(info, t, nc_timer);
-	isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-}
-
-/* Next routine is called, whenever the DTR-signal is raised.
- * It checks the ncarrier-flag, and triggers the above routine
- * when necessary. The ncarrier-flag is set, whenever DTR goes
- * low.
- */
-static void
-isdn_tty_modem_ncarrier(modem_info *info)
-{
-	if (info->ncarrier) {
-		info->nc_timer.expires = jiffies + HZ;
-		add_timer(&info->nc_timer);
-	}
-}
-
-/*
- * return the usage calculated by si and layer 2 protocol
- */
-static int
-isdn_calc_usage(int si, int l2)
-{
-	int usg = ISDN_USAGE_MODEM;
-
-#ifdef CONFIG_ISDN_AUDIO
-	if (si == 1) {
-		switch (l2) {
-		case ISDN_PROTO_L2_MODEM:
-			usg = ISDN_USAGE_MODEM;
-			break;
-#ifdef CONFIG_ISDN_TTY_FAX
-		case ISDN_PROTO_L2_FAX:
-			usg = ISDN_USAGE_FAX;
-			break;
-#endif
-		case ISDN_PROTO_L2_TRANS:
-		default:
-			usg = ISDN_USAGE_VOICE;
-			break;
-		}
-	}
-#endif
-	return (usg);
-}
-
-/* isdn_tty_dial() performs dialing of a tty an the necessary
- * setup of the lower levels before that.
- */
-static void
-isdn_tty_dial(char *n, modem_info *info, atemu *m)
-{
-	int usg = ISDN_USAGE_MODEM;
-	int si = 7;
-	int l2 = m->mdmreg[REG_L2PROT];
-	u_long flags;
-	isdn_ctrl cmd;
-	int i;
-	int j;
-
-	for (j = 7; j >= 0; j--)
-		if (m->mdmreg[REG_SI1] & (1 << j)) {
-			si = bit2si[j];
-			break;
-		}
-	usg = isdn_calc_usage(si, l2);
-#ifdef CONFIG_ISDN_AUDIO
-	if ((si == 1) &&
-	    (l2 != ISDN_PROTO_L2_MODEM)
-#ifdef CONFIG_ISDN_TTY_FAX
-	    && (l2 != ISDN_PROTO_L2_FAX)
-#endif
-		) {
-		l2 = ISDN_PROTO_L2_TRANS;
-		usg = ISDN_USAGE_VOICE;
-	}
-#endif
-	m->mdmreg[REG_SI1I] = si2bit[si];
-	spin_lock_irqsave(&dev->lock, flags);
-	i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
-	if (i < 0) {
-		spin_unlock_irqrestore(&dev->lock, flags);
-		isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
-	} else {
-		info->isdn_driver = dev->drvmap[i];
-		info->isdn_channel = dev->chanmap[i];
-		info->drv_index = i;
-		dev->m_idx[i] = info->line;
-		dev->usage[i] |= ISDN_USAGE_OUTGOING;
-		info->last_dir = 1;
-		strcpy(info->last_num, n);
-		isdn_info_update();
-		spin_unlock_irqrestore(&dev->lock, flags);
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		cmd.command = ISDN_CMD_CLREAZ;
-		isdn_command(&cmd);
-		strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETEAZ;
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL2;
-		info->last_l2 = l2;
-		cmd.arg = info->isdn_channel + (l2 << 8);
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL3;
-		cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
-#ifdef CONFIG_ISDN_TTY_FAX
-		if (l2 == ISDN_PROTO_L2_FAX) {
-			cmd.parm.fax = info->fax;
-			info->fax->direction = ISDN_TTY_FAX_CONN_OUT;
-		}
-#endif
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		sprintf(cmd.parm.setup.phone, "%s", n);
-		sprintf(cmd.parm.setup.eazmsn, "%s",
-			isdn_map_eaz2msn(m->msn, info->isdn_driver));
-		cmd.parm.setup.si1 = si;
-		cmd.parm.setup.si2 = m->mdmreg[REG_SI2];
-		cmd.command = ISDN_CMD_DIAL;
-		info->dialing = 1;
-		info->emu.carrierwait = 0;
-		strcpy(dev->num[i], n);
-		isdn_info_update();
-		isdn_command(&cmd);
-		isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
-	}
-}
-
-/* isdn_tty_hangup() disassociates a tty from the real
- * ISDN-line (hangup). The usage-status is cleared
- * and some cleanup is done also.
- */
-void
-isdn_tty_modem_hup(modem_info *info, int local)
-{
-	isdn_ctrl cmd;
-	int di, ch;
-
-	if (!info)
-		return;
-
-	di = info->isdn_driver;
-	ch = info->isdn_channel;
-	if (di < 0 || ch < 0)
-		return;
-
-	info->isdn_driver = -1;
-	info->isdn_channel = -1;
-
-#ifdef ISDN_DEBUG_MODEM_HUP
-	printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
-#endif
-	info->rcvsched = 0;
-	isdn_tty_flush_buffer(info->port.tty);
-	if (info->online) {
-		info->last_lhup = local;
-		info->online = 0;
-		isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-	}
-#ifdef CONFIG_ISDN_AUDIO
-	info->vonline = 0;
-#ifdef CONFIG_ISDN_TTY_FAX
-	info->faxonline = 0;
-	info->fax->phase = ISDN_FAX_PHASE_IDLE;
-#endif
-	info->emu.vpar[4] = 0;
-	info->emu.vpar[5] = 8;
-	kfree(info->dtmf_state);
-	info->dtmf_state = NULL;
-	kfree(info->silence_state);
-	info->silence_state = NULL;
-	kfree(info->adpcms);
-	info->adpcms = NULL;
-	kfree(info->adpcmr);
-	info->adpcmr = NULL;
-#endif
-	if ((info->msr & UART_MSR_RI) &&
-	    (info->emu.mdmreg[REG_RUNG] & BIT_RUNG))
-		isdn_tty_modem_result(RESULT_RUNG, info);
-	info->msr &= ~(UART_MSR_DCD | UART_MSR_RI);
-	info->lsr |= UART_LSR_TEMT;
-
-	if (local) {
-		cmd.driver = di;
-		cmd.command = ISDN_CMD_HANGUP;
-		cmd.arg = ch;
-		isdn_command(&cmd);
-	}
-
-	isdn_all_eaz(di, ch);
-	info->emu.mdmreg[REG_RINGCNT] = 0;
-	isdn_free_channel(di, ch, 0);
-
-	if (info->drv_index >= 0) {
-		dev->m_idx[info->drv_index] = -1;
-		info->drv_index = -1;
-	}
-}
-
-/*
- * Begin of a CAPI like interface, currently used only for
- * supplementary service (CAPI 2.0 part III)
- */
-#include <linux/isdn/capicmd.h>
-#include <linux/module.h>
-
-int
-isdn_tty_capi_facility(capi_msg *cm) {
-	return (-1); /* dummy */
-}
-
-/* isdn_tty_suspend() tries to suspend the current tty connection
- */
-static void
-isdn_tty_suspend(char *id, modem_info *info, atemu *m)
-{
-	isdn_ctrl cmd;
-
-	int l;
-
-	if (!info)
-		return;
-
-#ifdef ISDN_DEBUG_MODEM_SERVICES
-	printk(KERN_DEBUG "Msusp ttyI%d\n", info->line);
-#endif
-	l = strlen(id);
-	if ((info->isdn_driver >= 0)) {
-		cmd.parm.cmsg.Length = l + 18;
-		cmd.parm.cmsg.Command = CAPI_FACILITY;
-		cmd.parm.cmsg.Subcommand = CAPI_REQ;
-		cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
-		cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
-		cmd.parm.cmsg.para[1] = 0;
-		cmd.parm.cmsg.para[2] = l + 3;
-		cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */
-		cmd.parm.cmsg.para[4] = 0;
-		cmd.parm.cmsg.para[5] = l;
-		memcpy(&cmd.parm.cmsg.para[6], id, l);
-		cmd.command = CAPI_PUT_MESSAGE;
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		isdn_command(&cmd);
-	}
-}
-
-/* isdn_tty_resume() tries to resume a suspended call
- * setup of the lower levels before that. unfortunately here is no
- * checking for compatibility of used protocols implemented by Q931
- * It does the same things like isdn_tty_dial, the last command
- * is different, may be we can merge it.
- */
-
-static void
-isdn_tty_resume(char *id, modem_info *info, atemu *m)
-{
-	int usg = ISDN_USAGE_MODEM;
-	int si = 7;
-	int l2 = m->mdmreg[REG_L2PROT];
-	isdn_ctrl cmd;
-	ulong flags;
-	int i;
-	int j;
-	int l;
-
-	l = strlen(id);
-	for (j = 7; j >= 0; j--)
-		if (m->mdmreg[REG_SI1] & (1 << j)) {
-			si = bit2si[j];
-			break;
-		}
-	usg = isdn_calc_usage(si, l2);
-#ifdef CONFIG_ISDN_AUDIO
-	if ((si == 1) &&
-	    (l2 != ISDN_PROTO_L2_MODEM)
-#ifdef CONFIG_ISDN_TTY_FAX
-	    && (l2 != ISDN_PROTO_L2_FAX)
-#endif
-		) {
-		l2 = ISDN_PROTO_L2_TRANS;
-		usg = ISDN_USAGE_VOICE;
-	}
-#endif
-	m->mdmreg[REG_SI1I] = si2bit[si];
-	spin_lock_irqsave(&dev->lock, flags);
-	i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
-	if (i < 0) {
-		spin_unlock_irqrestore(&dev->lock, flags);
-		isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
-	} else {
-		info->isdn_driver = dev->drvmap[i];
-		info->isdn_channel = dev->chanmap[i];
-		info->drv_index = i;
-		dev->m_idx[i] = info->line;
-		dev->usage[i] |= ISDN_USAGE_OUTGOING;
-		info->last_dir = 1;
-//		strcpy(info->last_num, n);
-		isdn_info_update();
-		spin_unlock_irqrestore(&dev->lock, flags);
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		cmd.command = ISDN_CMD_CLREAZ;
-		isdn_command(&cmd);
-		strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETEAZ;
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL2;
-		info->last_l2 = l2;
-		cmd.arg = info->isdn_channel + (l2 << 8);
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL3;
-		cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		cmd.parm.cmsg.Length = l + 18;
-		cmd.parm.cmsg.Command = CAPI_FACILITY;
-		cmd.parm.cmsg.Subcommand = CAPI_REQ;
-		cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
-		cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
-		cmd.parm.cmsg.para[1] = 0;
-		cmd.parm.cmsg.para[2] = l + 3;
-		cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */
-		cmd.parm.cmsg.para[4] = 0;
-		cmd.parm.cmsg.para[5] = l;
-		memcpy(&cmd.parm.cmsg.para[6], id, l);
-		cmd.command = CAPI_PUT_MESSAGE;
-		info->dialing = 1;
-//		strcpy(dev->num[i], n);
-		isdn_info_update();
-		isdn_command(&cmd);
-		isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
-	}
-}
-
-/* isdn_tty_send_msg() sends a message to a HL driver
- * This is used for hybrid modem cards to send AT commands to it
- */
-
-static void
-isdn_tty_send_msg(modem_info *info, atemu *m, char *msg)
-{
-	int usg = ISDN_USAGE_MODEM;
-	int si = 7;
-	int l2 = m->mdmreg[REG_L2PROT];
-	isdn_ctrl cmd;
-	ulong flags;
-	int i;
-	int j;
-	int l;
-
-	l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg)
-		+ sizeof(cmd.parm.cmsg.para) - 2);
-
-	if (!l) {
-		isdn_tty_modem_result(RESULT_ERROR, info);
-		return;
-	}
-	for (j = 7; j >= 0; j--)
-		if (m->mdmreg[REG_SI1] & (1 << j)) {
-			si = bit2si[j];
-			break;
-		}
-	usg = isdn_calc_usage(si, l2);
-#ifdef CONFIG_ISDN_AUDIO
-	if ((si == 1) &&
-	    (l2 != ISDN_PROTO_L2_MODEM)
-#ifdef CONFIG_ISDN_TTY_FAX
-	    && (l2 != ISDN_PROTO_L2_FAX)
-#endif
-		) {
-		l2 = ISDN_PROTO_L2_TRANS;
-		usg = ISDN_USAGE_VOICE;
-	}
-#endif
-	m->mdmreg[REG_SI1I] = si2bit[si];
-	spin_lock_irqsave(&dev->lock, flags);
-	i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
-	if (i < 0) {
-		spin_unlock_irqrestore(&dev->lock, flags);
-		isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
-	} else {
-		info->isdn_driver = dev->drvmap[i];
-		info->isdn_channel = dev->chanmap[i];
-		info->drv_index = i;
-		dev->m_idx[i] = info->line;
-		dev->usage[i] |= ISDN_USAGE_OUTGOING;
-		info->last_dir = 1;
-		isdn_info_update();
-		spin_unlock_irqrestore(&dev->lock, flags);
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		cmd.command = ISDN_CMD_CLREAZ;
-		isdn_command(&cmd);
-		strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETEAZ;
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL2;
-		info->last_l2 = l2;
-		cmd.arg = info->isdn_channel + (l2 << 8);
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL3;
-		cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		cmd.parm.cmsg.Length = l + 14;
-		cmd.parm.cmsg.Command = CAPI_MANUFACTURER;
-		cmd.parm.cmsg.Subcommand = CAPI_REQ;
-		cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
-		cmd.parm.cmsg.para[0] = l + 1;
-		strncpy(&cmd.parm.cmsg.para[1], msg, l);
-		cmd.parm.cmsg.para[l + 1] = 0xd;
-		cmd.command = CAPI_PUT_MESSAGE;
-/*		info->dialing = 1;
-		strcpy(dev->num[i], n);
-		isdn_info_update();
-*/
-		isdn_command(&cmd);
-	}
-}
-
-static inline int
-isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
-{
-#ifdef MODEM_PARANOIA_CHECK
-	if (!info) {
-		printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n",
-		       name, routine);
-		return 1;
-	}
-	if (info->magic != ISDN_ASYNC_MAGIC) {
-		printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n",
-		       name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void
-isdn_tty_change_speed(modem_info *info)
-{
-	struct tty_port *port = &info->port;
-	uint cflag,
-		cval,
-		quot;
-	int i;
-
-	if (!port->tty)
-		return;
-	cflag = port->tty->termios.c_cflag;
-
-	quot = i = cflag & CBAUD;
-	if (i & CBAUDEX) {
-		i &= ~CBAUDEX;
-		if (i < 1 || i > 2)
-			port->tty->termios.c_cflag &= ~CBAUDEX;
-		else
-			i += 15;
-	}
-	if (quot) {
-		info->mcr |= UART_MCR_DTR;
-		isdn_tty_modem_ncarrier(info);
-	} else {
-		info->mcr &= ~UART_MCR_DTR;
-		if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
-#ifdef ISDN_DEBUG_MODEM_HUP
-			printk(KERN_DEBUG "Mhup in changespeed\n");
-#endif
-			if (info->online)
-				info->ncarrier = 1;
-			isdn_tty_modem_reset_regs(info, 0);
-			isdn_tty_modem_hup(info, 1);
-		}
-		return;
-	}
-	/* byte size and parity */
-	cval = cflag & (CSIZE | CSTOPB);
-	cval >>= 4;
-	if (cflag & PARENB)
-		cval |= UART_LCR_PARITY;
-	if (!(cflag & PARODD))
-		cval |= UART_LCR_EPAR;
-
-	tty_port_set_check_carrier(port, ~cflag & CLOCAL);
-}
-
-static int
-isdn_tty_startup(modem_info *info)
-{
-	if (tty_port_initialized(&info->port))
-		return 0;
-	isdn_lock_drivers();
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line);
-#endif
-	/*
-	 * Now, initialize the UART
-	 */
-	info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-	/*
-	 * and set the speed of the serial port
-	 */
-	isdn_tty_change_speed(info);
-
-	tty_port_set_initialized(&info->port, 1);
-	info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
-	info->send_outstanding = 0;
-	return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void
-isdn_tty_shutdown(modem_info *info)
-{
-	if (!tty_port_initialized(&info->port))
-		return;
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
-#endif
-	isdn_unlock_drivers();
-	info->msr &= ~UART_MSR_RI;
-	if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
-		info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
-		if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
-			isdn_tty_modem_reset_regs(info, 0);
-#ifdef ISDN_DEBUG_MODEM_HUP
-			printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n");
-#endif
-			isdn_tty_modem_hup(info, 1);
-		}
-	}
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	tty_port_set_initialized(&info->port, 0);
-}
-
-/* isdn_tty_write() is the main send-routine. It is called from the upper
- * levels within the kernel to perform sending data. Depending on the
- * online-flag it either directs output to the at-command-interpreter or
- * to the lower level. Additional tasks done here:
- *  - If online, check for escape-sequence (+++)
- *  - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes.
- *  - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed.
- *  - If dialing, abort dial.
- */
-static int
-isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
-{
-	int c;
-	int total = 0;
-	modem_info *info = (modem_info *) tty->driver_data;
-	atemu *m = &info->emu;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write"))
-		return 0;
-	/* See isdn_tty_senddown() */
-	atomic_inc(&info->xmit_lock);
-	while (1) {
-		c = count;
-		if (c > info->xmit_size - info->xmit_count)
-			c = info->xmit_size - info->xmit_count;
-		if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize)
-			c = dev->drv[info->isdn_driver]->maxbufsize;
-		if (c <= 0)
-			break;
-		if ((info->online > 1)
-#ifdef CONFIG_ISDN_AUDIO
-		    || (info->vonline & 3)
-#endif
-			) {
-#ifdef CONFIG_ISDN_AUDIO
-			if (!info->vonline)
-#endif
-				isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
-						   &(m->pluscount),
-						   &(m->lastplus));
-			memcpy(&info->port.xmit_buf[info->xmit_count], buf, c);
-#ifdef CONFIG_ISDN_AUDIO
-			if (info->vonline) {
-				int cc = isdn_tty_handleDLEdown(info, m, c);
-				if (info->vonline & 2) {
-					if (!cc) {
-						/* If DLE decoding results in zero-transmit, but
-						 * c originally was non-zero, do a wakeup.
-						 */
-						tty_wakeup(tty);
-						info->msr |= UART_MSR_CTS;
-						info->lsr |= UART_LSR_TEMT;
-					}
-					info->xmit_count += cc;
-				}
-				if ((info->vonline & 3) == 1) {
-					/* Do NOT handle Ctrl-Q or Ctrl-S
-					 * when in full-duplex audio mode.
-					 */
-					if (isdn_tty_end_vrx(buf, c)) {
-						info->vonline &= ~1;
-#ifdef ISDN_DEBUG_MODEM_VOICE
-						printk(KERN_DEBUG
-						       "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n",
-						       info->line);
-#endif
-						isdn_tty_at_cout("\020\003\r\nVCON\r\n", info);
-					}
-				}
-			} else
-				if (TTY_IS_FCLASS1(info)) {
-					int cc = isdn_tty_handleDLEdown(info, m, c);
-
-					if (info->vonline & 4) { /* ETX seen */
-						isdn_ctrl c;
-
-						c.command = ISDN_CMD_FAXCMD;
-						c.driver = info->isdn_driver;
-						c.arg = info->isdn_channel;
-						c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL;
-						c.parm.aux.subcmd = ETX;
-						isdn_command(&c);
-					}
-					info->vonline = 0;
-#ifdef ISDN_DEBUG_MODEM_VOICE
-					printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c);
-#endif
-					info->xmit_count += cc;
-				} else
-#endif
-					info->xmit_count += c;
-		} else {
-			info->msr |= UART_MSR_CTS;
-			info->lsr |= UART_LSR_TEMT;
-			if (info->dialing) {
-				info->dialing = 0;
-#ifdef ISDN_DEBUG_MODEM_HUP
-				printk(KERN_DEBUG "Mhup in isdn_tty_write\n");
-#endif
-				isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-				isdn_tty_modem_hup(info, 1);
-			} else
-				c = isdn_tty_edit_at(buf, c, info);
-		}
-		buf += c;
-		count -= c;
-		total += c;
-	}
-	atomic_dec(&info->xmit_lock);
-	if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) {
-		if (m->mdmreg[REG_DXMT] & BIT_DXMT) {
-			isdn_tty_senddown(info);
-			isdn_tty_tint(info);
-		}
-		isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
-	}
-	return total;
-}
-
-static int
-isdn_tty_write_room(struct tty_struct *tty)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-	int ret;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room"))
-		return 0;
-	if (!info->online)
-		return info->xmit_size;
-	ret = info->xmit_size - info->xmit_count;
-	return (ret < 0) ? 0 : ret;
-}
-
-static int
-isdn_tty_chars_in_buffer(struct tty_struct *tty)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer"))
-		return 0;
-	if (!info->online)
-		return 0;
-	return (info->xmit_count);
-}
-
-static void
-isdn_tty_flush_buffer(struct tty_struct *tty)
-{
-	modem_info *info;
-
-	if (!tty) {
-		return;
-	}
-	info = (modem_info *) tty->driver_data;
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) {
-		return;
-	}
-	isdn_tty_cleanup_xmit(info);
-	info->xmit_count = 0;
-	tty_wakeup(tty);
-}
-
-static void
-isdn_tty_flush_chars(struct tty_struct *tty)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars"))
-		return;
-	if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue))
-		isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
-}
-
-/*
- * ------------------------------------------------------------
- * isdn_tty_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void
-isdn_tty_throttle(struct tty_struct *tty)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle"))
-		return;
-	if (I_IXOFF(tty))
-		info->x_char = STOP_CHAR(tty);
-	info->mcr &= ~UART_MCR_RTS;
-}
-
-static void
-isdn_tty_unthrottle(struct tty_struct *tty)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle"))
-		return;
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			info->x_char = START_CHAR(tty);
-	}
-	info->mcr |= UART_MCR_RTS;
-}
-
-/*
- * ------------------------------------------------------------
- * isdn_tty_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-/*
- * isdn_tty_get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- *          is emptied.  On bus types like RS485, the transmitter must
- *          release the bus after transmitting. This must be done when
- *          the transmit shift register is empty, not be done when the
- *          transmit holding register is empty.  This functionality
- *          allows RS485 driver to be written in user space.
- */
-static int
-isdn_tty_get_lsr_info(modem_info *info, uint __user *value)
-{
-	u_char status;
-	uint result;
-
-	status = info->lsr;
-	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
-	return put_user(result, value);
-}
-
-
-static int
-isdn_tty_tiocmget(struct tty_struct *tty)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-	u_char control, status;
-
-	if (isdn_tty_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-	if (tty_io_error(tty))
-		return -EIO;
-
-	mutex_lock(&modem_info_mutex);
-#ifdef ISDN_DEBUG_MODEM_IOCTL
-	printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line);
-#endif
-
-	control = info->mcr;
-	status = info->msr;
-	mutex_unlock(&modem_info_mutex);
-	return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
-		| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
-		| ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
-		| ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
-		| ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
-		| ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
-}
-
-static int
-isdn_tty_tiocmset(struct tty_struct *tty,
-		  unsigned int set, unsigned int clear)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-
-	if (isdn_tty_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-	if (tty_io_error(tty))
-		return -EIO;
-
-#ifdef ISDN_DEBUG_MODEM_IOCTL
-	printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear);
-#endif
-
-	mutex_lock(&modem_info_mutex);
-	if (set & TIOCM_RTS)
-		info->mcr |= UART_MCR_RTS;
-	if (set & TIOCM_DTR) {
-		info->mcr |= UART_MCR_DTR;
-		isdn_tty_modem_ncarrier(info);
-	}
-
-	if (clear & TIOCM_RTS)
-		info->mcr &= ~UART_MCR_RTS;
-	if (clear & TIOCM_DTR) {
-		info->mcr &= ~UART_MCR_DTR;
-		if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
-			isdn_tty_modem_reset_regs(info, 0);
-#ifdef ISDN_DEBUG_MODEM_HUP
-			printk(KERN_DEBUG "Mhup in TIOCMSET\n");
-#endif
-			if (info->online)
-				info->ncarrier = 1;
-			isdn_tty_modem_hup(info, 1);
-		}
-	}
-	mutex_unlock(&modem_info_mutex);
-	return 0;
-}
-
-static int
-isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl"))
-		return -ENODEV;
-	if (tty_io_error(tty))
-		return -EIO;
-	switch (cmd) {
-	case TIOCSERGETLSR:	/* Get line status register */
-#ifdef ISDN_DEBUG_MODEM_IOCTL
-		printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
-#endif
-		return isdn_tty_get_lsr_info(info, (uint __user *) arg);
-	default:
-#ifdef ISDN_DEBUG_MODEM_IOCTL
-		printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
-#endif
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static void
-isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-
-	mutex_lock(&modem_info_mutex);
-	if (!old_termios)
-		isdn_tty_change_speed(info);
-	else {
-		if (tty->termios.c_cflag == old_termios->c_cflag &&
-		    tty->termios.c_ispeed == old_termios->c_ispeed &&
-		    tty->termios.c_ospeed == old_termios->c_ospeed) {
-			mutex_unlock(&modem_info_mutex);
-			return;
-		}
-		isdn_tty_change_speed(info);
-	}
-	mutex_unlock(&modem_info_mutex);
-}
-
-/*
- * ------------------------------------------------------------
- * isdn_tty_open() and friends
- * ------------------------------------------------------------
- */
-
-static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty)
-{
-	modem_info *info = &dev->mdm.info[tty->index];
-
-	if (isdn_tty_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-
-	tty->driver_data = info;
-
-	return tty_port_install(&info->port, driver, tty);
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int
-isdn_tty_open(struct tty_struct *tty, struct file *filp)
-{
-	modem_info *info = tty->driver_data;
-	struct tty_port *port = &info->port;
-	int retval;
-
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
-	       port->count);
-#endif
-	port->count++;
-	port->tty = tty;
-	/*
-	 * Start up serial port
-	 */
-	retval = isdn_tty_startup(info);
-	if (retval) {
-#ifdef ISDN_DEBUG_MODEM_OPEN
-		printk(KERN_DEBUG "isdn_tty_open return after startup\n");
-#endif
-		return retval;
-	}
-	retval = tty_port_block_til_ready(port, tty, filp);
-	if (retval) {
-#ifdef ISDN_DEBUG_MODEM_OPEN
-		printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
-#endif
-		return retval;
-	}
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line);
-#endif
-	dev->modempoll++;
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "isdn_tty_open normal exit\n");
-#endif
-	return 0;
-}
-
-static void
-isdn_tty_close(struct tty_struct *tty, struct file *filp)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-	struct tty_port *port = &info->port;
-	ulong timeout;
-
-	if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
-		return;
-	if (tty_hung_up_p(filp)) {
-#ifdef ISDN_DEBUG_MODEM_OPEN
-		printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n");
-#endif
-		return;
-	}
-	if ((tty->count == 1) && (port->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
-		       "info->count is %d\n", port->count);
-		port->count = 1;
-	}
-	if (--port->count < 0) {
-		printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
-		       info->line, port->count);
-		port->count = 0;
-	}
-	if (port->count) {
-#ifdef ISDN_DEBUG_MODEM_OPEN
-		printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
-#endif
-		return;
-	}
-	info->closing = 1;
-
-	tty->closing = 1;
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-	if (tty_port_initialized(port)) {
-		tty_wait_until_sent(tty, 3000);	/* 30 seconds timeout */
-		/*
-		 * Before we drop DTR, make sure the UART transmitter
-		 * has completely drained; this is especially
-		 * important if there is a transmit FIFO!
-		 */
-		timeout = jiffies + HZ;
-		while (!(info->lsr & UART_LSR_TEMT)) {
-			schedule_timeout_interruptible(20);
-			if (time_after(jiffies, timeout))
-				break;
-		}
-	}
-	dev->modempoll--;
-	isdn_tty_shutdown(info);
-	isdn_tty_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	port->tty = NULL;
-	info->ncarrier = 0;
-
-	tty_port_close_end(port, tty);
-	info->closing = 0;
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "isdn_tty_close normal exit\n");
-#endif
-}
-
-/*
- * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-static void
-isdn_tty_hangup(struct tty_struct *tty)
-{
-	modem_info *info = (modem_info *) tty->driver_data;
-	struct tty_port *port = &info->port;
-
-	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
-		return;
-	isdn_tty_shutdown(info);
-	port->count = 0;
-	tty_port_set_active(port, 0);
-	port->tty = NULL;
-	wake_up_interruptible(&port->open_wait);
-}
-
-/* This routine initializes all emulator-data.
- */
-static void
-isdn_tty_reset_profile(atemu *m)
-{
-	m->profile[0] = 0;
-	m->profile[1] = 0;
-	m->profile[2] = 43;
-	m->profile[3] = 13;
-	m->profile[4] = 10;
-	m->profile[5] = 8;
-	m->profile[6] = 3;
-	m->profile[7] = 60;
-	m->profile[8] = 2;
-	m->profile[9] = 6;
-	m->profile[10] = 7;
-	m->profile[11] = 70;
-	m->profile[12] = 0x45;
-	m->profile[13] = 4;
-	m->profile[14] = ISDN_PROTO_L2_X75I;
-	m->profile[15] = ISDN_PROTO_L3_TRANS;
-	m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16;
-	m->profile[17] = ISDN_MODEM_WINSIZE;
-	m->profile[18] = 4;
-	m->profile[19] = 0;
-	m->profile[20] = 0;
-	m->profile[23] = 0;
-	m->pmsn[0] = '\0';
-	m->plmsn[0] = '\0';
-}
-
-#ifdef CONFIG_ISDN_AUDIO
-static void
-isdn_tty_modem_reset_vpar(atemu *m)
-{
-	m->vpar[0] = 2;         /* Voice-device            (2 = phone line) */
-	m->vpar[1] = 0;         /* Silence detection level (0 = none      ) */
-	m->vpar[2] = 70;        /* Silence interval        (7 sec.        ) */
-	m->vpar[3] = 2;         /* Compression type        (1 = ADPCM-2   ) */
-	m->vpar[4] = 0;         /* DTMF detection level    (0 = softcode  ) */
-	m->vpar[5] = 8;         /* DTMF interval           (8 * 5 ms.     ) */
-}
-#endif
-
-#ifdef CONFIG_ISDN_TTY_FAX
-static void
-isdn_tty_modem_reset_faxpar(modem_info *info)
-{
-	T30_s *f = info->fax;
-
-	f->code = 0;
-	f->phase = ISDN_FAX_PHASE_IDLE;
-	f->direction = 0;
-	f->resolution = 1;	/* fine */
-	f->rate = 5;		/* 14400 bit/s */
-	f->width = 0;
-	f->length = 0;
-	f->compression = 0;
-	f->ecm = 0;
-	f->binary = 0;
-	f->scantime = 0;
-	memset(&f->id[0], 32, FAXIDLEN - 1);
-	f->id[FAXIDLEN - 1] = 0;
-	f->badlin = 0;
-	f->badmul = 0;
-	f->bor = 0;
-	f->nbc = 0;
-	f->cq = 0;
-	f->cr = 0;
-	f->ctcrty = 0;
-	f->minsp = 0;
-	f->phcto = 30;
-	f->rel = 0;
-	memset(&f->pollid[0], 32, FAXIDLEN - 1);
-	f->pollid[FAXIDLEN - 1] = 0;
-}
-#endif
-
-static void
-isdn_tty_modem_reset_regs(modem_info *info, int force)
-{
-	atemu *m = &info->emu;
-	if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) {
-		memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG);
-		memcpy(m->msn, m->pmsn, ISDN_MSNLEN);
-		memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN);
-		info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
-	}
-#ifdef CONFIG_ISDN_AUDIO
-	isdn_tty_modem_reset_vpar(m);
-#endif
-#ifdef CONFIG_ISDN_TTY_FAX
-	isdn_tty_modem_reset_faxpar(info);
-#endif
-	m->mdmcmdl = 0;
-}
-
-static void
-modem_write_profile(atemu *m)
-{
-	memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG);
-	memcpy(m->pmsn, m->msn, ISDN_MSNLEN);
-	memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN);
-	if (dev->profd)
-		send_sig(SIGIO, dev->profd, 1);
-}
-
-static const struct tty_operations modem_ops = {
-	.install = isdn_tty_install,
-	.open = isdn_tty_open,
-	.close = isdn_tty_close,
-	.write = isdn_tty_write,
-	.flush_chars = isdn_tty_flush_chars,
-	.write_room = isdn_tty_write_room,
-	.chars_in_buffer = isdn_tty_chars_in_buffer,
-	.flush_buffer = isdn_tty_flush_buffer,
-	.ioctl = isdn_tty_ioctl,
-	.throttle = isdn_tty_throttle,
-	.unthrottle = isdn_tty_unthrottle,
-	.set_termios = isdn_tty_set_termios,
-	.hangup = isdn_tty_hangup,
-	.tiocmget = isdn_tty_tiocmget,
-	.tiocmset = isdn_tty_tiocmset,
-};
-
-static int isdn_tty_carrier_raised(struct tty_port *port)
-{
-	modem_info *info = container_of(port, modem_info, port);
-	return info->msr & UART_MSR_DCD;
-}
-
-static const struct tty_port_operations isdn_tty_port_ops = {
-	.carrier_raised = isdn_tty_carrier_raised,
-};
-
-int
-isdn_tty_modem_init(void)
-{
-	isdn_modem_t	*m;
-	int		i, retval;
-	modem_info	*info;
-
-	m = &dev->mdm;
-	m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS);
-	if (!m->tty_modem)
-		return -ENOMEM;
-	m->tty_modem->name = "ttyI";
-	m->tty_modem->major = ISDN_TTY_MAJOR;
-	m->tty_modem->minor_start = 0;
-	m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL;
-	m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
-	m->tty_modem->init_termios = tty_std_termios;
-	m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	m->tty_modem->flags = TTY_DRIVER_REAL_RAW;
-	m->tty_modem->driver_name = "isdn_tty";
-	tty_set_operations(m->tty_modem, &modem_ops);
-	retval = tty_register_driver(m->tty_modem);
-	if (retval) {
-		printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n");
-		goto err;
-	}
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		info = &m->info[i];
-#ifdef CONFIG_ISDN_TTY_FAX
-		if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) {
-			printk(KERN_ERR "Could not allocate fax t30-buffer\n");
-			retval = -ENOMEM;
-			goto err_unregister;
-		}
-#endif
-		tty_port_init(&info->port);
-		info->port.ops = &isdn_tty_port_ops;
-		spin_lock_init(&info->readlock);
-		sprintf(info->last_cause, "0000");
-		sprintf(info->last_num, "none");
-		info->last_dir = 0;
-		info->last_lhup = 1;
-		info->last_l2 = -1;
-		info->last_si = 0;
-		isdn_tty_reset_profile(&info->emu);
-		isdn_tty_modem_reset_regs(info, 1);
-		info->magic = ISDN_ASYNC_MAGIC;
-		info->line = i;
-		info->x_char = 0;
-		info->isdn_driver = -1;
-		info->isdn_channel = -1;
-		info->drv_index = -1;
-		info->xmit_size = ISDN_SERIAL_XMIT_SIZE;
-		timer_setup(&info->nc_timer, isdn_tty_modem_do_ncarrier, 0);
-		skb_queue_head_init(&info->xmit_queue);
-#ifdef CONFIG_ISDN_AUDIO
-		skb_queue_head_init(&info->dtmf_queue);
-#endif
-		info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5,
-				GFP_KERNEL);
-		if (!info->port.xmit_buf) {
-			printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
-			retval = -ENOMEM;
-			goto err_unregister;
-		}
-		/* Make room for T.70 header */
-		info->port.xmit_buf += 4;
-	}
-	return 0;
-err_unregister:
-	for (i--; i >= 0; i--) {
-		info = &m->info[i];
-#ifdef CONFIG_ISDN_TTY_FAX
-		kfree(info->fax);
-#endif
-		kfree(info->port.xmit_buf - 4);
-		info->port.xmit_buf = NULL;
-		tty_port_destroy(&info->port);
-	}
-	tty_unregister_driver(m->tty_modem);
-err:
-	put_tty_driver(m->tty_modem);
-	m->tty_modem = NULL;
-	return retval;
-}
-
-void
-isdn_tty_exit(void)
-{
-	modem_info *info;
-	int i;
-
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		info = &dev->mdm.info[i];
-		isdn_tty_cleanup_xmit(info);
-#ifdef CONFIG_ISDN_TTY_FAX
-		kfree(info->fax);
-#endif
-		kfree(info->port.xmit_buf - 4);
-		info->port.xmit_buf = NULL;
-		tty_port_destroy(&info->port);
-	}
-	tty_unregister_driver(dev->mdm.tty_modem);
-	put_tty_driver(dev->mdm.tty_modem);
-	dev->mdm.tty_modem = NULL;
-}
-
-
-/*
- * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx)
- *      match the MSN against the MSNs (glob patterns) defined for tty_emulator,
- *      and return 0 for match, 1 for no match, 2 if MSN could match if longer.
- */
-
-static int
-isdn_tty_match_icall(char *cid, atemu *emu, int di)
-{
-#ifdef ISDN_DEBUG_MODEM_ICALL
-	printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n",
-	       emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di),
-	       emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]);
-#endif
-	if (strlen(emu->lmsn)) {
-		char *p = emu->lmsn;
-		char *q;
-		int  tmp;
-		int  ret = 0;
-
-		while (1) {
-			if ((q = strchr(p, ';')))
-				*q = '\0';
-			if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret)
-				ret = tmp;
-#ifdef ISDN_DEBUG_MODEM_ICALL
-			printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n",
-			       p, isdn_map_eaz2msn(emu->msn, di), tmp);
-#endif
-			if (q) {
-				*q = ';';
-				p = q;
-				p++;
-			}
-			if (!tmp)
-				return 0;
-			if (!q)
-				break;
-		}
-		return ret;
-	} else {
-		int tmp;
-		tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di));
-#ifdef ISDN_DEBUG_MODEM_ICALL
-		printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n",
-		       isdn_map_eaz2msn(emu->msn, di), tmp);
-#endif
-		return tmp;
-	}
-}
-
-/*
- * An incoming call-request has arrived.
- * Search the tty-devices for an appropriate device and bind
- * it to the ISDN-Channel.
- * Return:
- *
- *  0 = No matching device found.
- *  1 = A matching device found.
- *  3 = No match found, but eventually would match, if
- *      CID is longer.
- */
-int
-isdn_tty_find_icall(int di, int ch, setup_parm *setup)
-{
-	char *eaz;
-	int i;
-	int wret;
-	int idx;
-	int si1;
-	int si2;
-	char *nr;
-	ulong flags;
-
-	if (!setup->phone[0]) {
-		nr = "0";
-		printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n");
-	} else
-		nr = setup->phone;
-	si1 = (int) setup->si1;
-	si2 = (int) setup->si2;
-	if (!setup->eazmsn[0]) {
-		printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n");
-		eaz = "0";
-	} else
-		eaz = setup->eazmsn;
-#ifdef ISDN_DEBUG_MODEM_ICALL
-	printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2);
-#endif
-	wret = 0;
-	spin_lock_irqsave(&dev->lock, flags);
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		modem_info *info = &dev->mdm.info[i];
-
-		if (info->port.count == 0)
-			continue;
-		if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) &&  /* SI1 is matching */
-		    (info->emu.mdmreg[REG_SI2] == si2))	{         /* SI2 is matching */
-			idx = isdn_dc2minor(di, ch);
-#ifdef ISDN_DEBUG_MODEM_ICALL
-			printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
-			printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
-			       info->port.flags, info->isdn_driver,
-			       info->isdn_channel, dev->usage[idx]);
-#endif
-			if (
-#ifndef FIX_FILE_TRANSFER
-			    tty_port_active(&info->port) &&
-#endif
-				(info->isdn_driver == -1) &&
-				(info->isdn_channel == -1) &&
-				(USG_NONE(dev->usage[idx]))) {
-				int matchret;
-
-				if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret)
-					wret = matchret;
-				if (!matchret) {                  /* EAZ is matching */
-					info->isdn_driver = di;
-					info->isdn_channel = ch;
-					info->drv_index = idx;
-					dev->m_idx[idx] = info->line;
-					dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE;
-					dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]);
-					strcpy(dev->num[idx], nr);
-					strcpy(info->emu.cpn, eaz);
-					info->emu.mdmreg[REG_SI1I] = si2bit[si1];
-					info->emu.mdmreg[REG_PLAN] = setup->plan;
-					info->emu.mdmreg[REG_SCREEN] = setup->screen;
-					isdn_info_update();
-					spin_unlock_irqrestore(&dev->lock, flags);
-					printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr,
-					       info->line);
-					info->msr |= UART_MSR_RI;
-					isdn_tty_modem_result(RESULT_RING, info);
-					isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1);
-					return 1;
-				}
-			}
-		}
-	}
-	spin_unlock_irqrestore(&dev->lock, flags);
-	printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz,
-	       ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2)) ? "rejected" : "ignored");
-	return (wret == 2) ? 3 : 0;
-}
-
-int
-isdn_tty_stat_callback(int i, isdn_ctrl *c)
-{
-	int mi;
-	modem_info *info;
-	char *e;
-
-	if (i < 0)
-		return 0;
-	if ((mi = dev->m_idx[i]) >= 0) {
-		info = &dev->mdm.info[mi];
-		switch (c->command) {
-		case ISDN_STAT_CINF:
-			printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num);
-			info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10);
-			if (e == (char *)c->parm.num)
-				info->emu.charge = 0;
-
-			break;
-		case ISDN_STAT_BSENT:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line);
-#endif
-			if ((info->isdn_driver == c->driver) &&
-			    (info->isdn_channel == c->arg)) {
-				info->msr |= UART_MSR_CTS;
-				if (info->send_outstanding)
-					if (!(--info->send_outstanding))
-						info->lsr |= UART_LSR_TEMT;
-				isdn_tty_tint(info);
-				return 1;
-			}
-			break;
-		case ISDN_STAT_CAUSE:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line);
-#endif
-			/* Signal cause to tty-device */
-			strncpy(info->last_cause, c->parm.num, 5);
-			return 1;
-		case ISDN_STAT_DISPLAY:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line);
-#endif
-			/* Signal display to tty-device */
-			if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) &&
-			    !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) {
-				isdn_tty_at_cout("\r\n", info);
-				isdn_tty_at_cout("DISPLAY: ", info);
-				isdn_tty_at_cout(c->parm.display, info);
-				isdn_tty_at_cout("\r\n", info);
-			}
-			return 1;
-		case ISDN_STAT_DCONN:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
-#endif
-			if (tty_port_active(&info->port)) {
-				if (info->dialing == 1) {
-					info->dialing = 2;
-					return 1;
-				}
-			}
-			break;
-		case ISDN_STAT_DHUP:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line);
-#endif
-			if (tty_port_active(&info->port)) {
-				if (info->dialing == 1)
-					isdn_tty_modem_result(RESULT_BUSY, info);
-				if (info->dialing > 1)
-					isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-				info->dialing = 0;
-#ifdef ISDN_DEBUG_MODEM_HUP
-				printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
-#endif
-				isdn_tty_modem_hup(info, 0);
-				return 1;
-			}
-			break;
-		case ISDN_STAT_BCONN:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line);
-#endif
-			/* Wake up any processes waiting
-			 * for incoming call of this device when
-			 * DCD follow the state of incoming carrier
-			 */
-			if (info->port.blocked_open &&
-			    (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
-				wake_up_interruptible(&info->port.open_wait);
-			}
-
-			/* Schedule CONNECT-Message to any tty
-			 * waiting for it and
-			 * set DCD-bit of its modem-status.
-			 */
-			if (tty_port_active(&info->port) ||
-			    (info->port.blocked_open &&
-			     (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
-				info->msr |= UART_MSR_DCD;
-				info->emu.charge = 0;
-				if (info->dialing & 0xf)
-					info->last_dir = 1;
-				else
-					info->last_dir = 0;
-				info->dialing = 0;
-				info->rcvsched = 1;
-				if (USG_MODEM(dev->usage[i])) {
-					if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) {
-						strcpy(info->emu.connmsg, c->parm.num);
-						isdn_tty_modem_result(RESULT_CONNECT, info);
-					} else
-						isdn_tty_modem_result(RESULT_CONNECT64000, info);
-				}
-				if (USG_VOICE(dev->usage[i]))
-					isdn_tty_modem_result(RESULT_VCON, info);
-				return 1;
-			}
-			break;
-		case ISDN_STAT_BHUP:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line);
-#endif
-			if (tty_port_active(&info->port)) {
-#ifdef ISDN_DEBUG_MODEM_HUP
-				printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
-#endif
-				isdn_tty_modem_hup(info, 0);
-				return 1;
-			}
-			break;
-		case ISDN_STAT_NODCH:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line);
-#endif
-			if (tty_port_active(&info->port)) {
-				if (info->dialing) {
-					info->dialing = 0;
-					info->last_l2 = -1;
-					info->last_si = 0;
-					sprintf(info->last_cause, "0000");
-					isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
-				}
-				isdn_tty_modem_hup(info, 0);
-				return 1;
-			}
-			break;
-		case ISDN_STAT_UNLOAD:
-#ifdef ISDN_TTY_STAT_DEBUG
-			printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line);
-#endif
-			for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-				info = &dev->mdm.info[i];
-				if (info->isdn_driver == c->driver) {
-					if (info->online)
-						isdn_tty_modem_hup(info, 1);
-				}
-			}
-			return 1;
-#ifdef CONFIG_ISDN_TTY_FAX
-		case ISDN_STAT_FAXIND:
-			if (tty_port_active(&info->port)) {
-				isdn_tty_fax_command(info, c);
-			}
-			break;
-#endif
-#ifdef CONFIG_ISDN_AUDIO
-		case ISDN_STAT_AUDIO:
-			if (tty_port_active(&info->port)) {
-				switch (c->parm.num[0]) {
-				case ISDN_AUDIO_DTMF:
-					if (info->vonline) {
-						isdn_audio_put_dle_code(info,
-									c->parm.num[1]);
-					}
-					break;
-				}
-			}
-			break;
-#endif
-		}
-	}
-	return 0;
-}
-
-/*********************************************************************
- Modem-Emulator-Routines
-*********************************************************************/
-
-#define cmdchar(c) ((c >= ' ') && (c <= 0x7f))
-
-/*
- * Put a message from the AT-emulator into receive-buffer of tty,
- * convert CR, LF, and BS to values in modem-registers 3, 4 and 5.
- */
-void
-isdn_tty_at_cout(char *msg, modem_info *info)
-{
-	struct tty_port *port = &info->port;
-	atemu *m = &info->emu;
-	char *p;
-	char c;
-	u_long flags;
-	struct sk_buff *skb = NULL;
-	char *sp = NULL;
-	int l;
-
-	if (!msg) {
-		printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n");
-		return;
-	}
-
-	l = strlen(msg);
-
-	spin_lock_irqsave(&info->readlock, flags);
-	if (info->closing) {
-		spin_unlock_irqrestore(&info->readlock, flags);
-		return;
-	}
-
-	/* use queue instead of direct, if online and */
-	/* data is in queue or buffer is full */
-	if (info->online && ((tty_buffer_request_room(port, l) < l) ||
-			     !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
-		skb = alloc_skb(l, GFP_ATOMIC);
-		if (!skb) {
-			spin_unlock_irqrestore(&info->readlock, flags);
-			return;
-		}
-		sp = skb_put(skb, l);
-#ifdef CONFIG_ISDN_AUDIO
-		ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
-		ISDN_AUDIO_SKB_LOCK(skb) = 0;
-#endif
-	}
-
-	for (p = msg; *p; p++) {
-		switch (*p) {
-		case '\r':
-			c = m->mdmreg[REG_CR];
-			break;
-		case '\n':
-			c = m->mdmreg[REG_LF];
-			break;
-		case '\b':
-			c = m->mdmreg[REG_BS];
-			break;
-		default:
-			c = *p;
-		}
-		if (skb) {
-			*sp++ = c;
-		} else {
-			if (tty_insert_flip_char(port, c, TTY_NORMAL) == 0)
-				break;
-		}
-	}
-	if (skb) {
-		__skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb);
-		dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len;
-		spin_unlock_irqrestore(&info->readlock, flags);
-		/* Schedule dequeuing */
-		if (dev->modempoll && info->rcvsched)
-			isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
-
-	} else {
-		spin_unlock_irqrestore(&info->readlock, flags);
-		tty_flip_buffer_push(port);
-	}
-}
-
-/*
- * Perform ATH Hangup
- */
-static void
-isdn_tty_on_hook(modem_info *info)
-{
-	if (info->isdn_channel >= 0) {
-#ifdef ISDN_DEBUG_MODEM_HUP
-		printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n");
-#endif
-		isdn_tty_modem_hup(info, 1);
-	}
-}
-
-static void
-isdn_tty_off_hook(void)
-{
-	printk(KERN_DEBUG "isdn_tty_off_hook\n");
-}
-
-#define PLUSWAIT1 (HZ / 2)      /* 0.5 sec. */
-#define PLUSWAIT2 (HZ * 3 / 2)  /* 1.5 sec */
-
-/*
- * Check Buffer for Modem-escape-sequence, activate timer-callback to
- * isdn_tty_modem_escape() if sequence found.
- *
- * Parameters:
- *   p          pointer to databuffer
- *   plus       escape-character
- *   count      length of buffer
- *   pluscount  count of valid escape-characters so far
- *   lastplus   timestamp of last character
- */
-static void
-isdn_tty_check_esc(const u_char *p, u_char plus, int count, int *pluscount,
-		   u_long *lastplus)
-{
-	if (plus > 127)
-		return;
-	if (count > 3) {
-		p += count - 3;
-		count = 3;
-		*pluscount = 0;
-	}
-	while (count > 0) {
-		if (*(p++) == plus) {
-			if ((*pluscount)++) {
-				/* Time since last '+' > 0.5 sec. ? */
-				if (time_after(jiffies, *lastplus + PLUSWAIT1))
-					*pluscount = 1;
-			} else {
-				/* Time since last non-'+' < 1.5 sec. ? */
-				if (time_before(jiffies, *lastplus + PLUSWAIT2))
-					*pluscount = 0;
-			}
-			if ((*pluscount == 3) && (count == 1))
-				isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1);
-			if (*pluscount > 3)
-				*pluscount = 1;
-		} else
-			*pluscount = 0;
-		*lastplus = jiffies;
-		count--;
-	}
-}
-
-/*
- * Return result of AT-emulator to tty-receive-buffer, depending on
- * modem-register 12, bit 0 and 1.
- * For CONNECT-messages also switch to online-mode.
- * For RING-message handle auto-ATA if register 0 != 0
- */
-
-static void
-isdn_tty_modem_result(int code, modem_info *info)
-{
-	atemu *m = &info->emu;
-	static char *msg[] =
-		{"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
-		 "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
-		 "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
-	char s[ISDN_MSNLEN + 10];
-
-	switch (code) {
-	case RESULT_RING:
-		m->mdmreg[REG_RINGCNT]++;
-		if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA])
-			/* Automatically accept incoming call */
-			isdn_tty_cmd_ATA(info);
-		break;
-	case RESULT_NO_CARRIER:
-#ifdef ISDN_DEBUG_MODEM_HUP
-		printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
-		       info->closing, !info->port.tty);
-#endif
-		m->mdmreg[REG_RINGCNT] = 0;
-		del_timer(&info->nc_timer);
-		info->ncarrier = 0;
-		if (info->closing || !info->port.tty)
-			return;
-
-#ifdef CONFIG_ISDN_AUDIO
-		if (info->vonline & 1) {
-#ifdef ISDN_DEBUG_MODEM_VOICE
-			printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
-			       info->line);
-#endif
-			/* voice-recording, add DLE-ETX */
-			isdn_tty_at_cout("\020\003", info);
-		}
-		if (info->vonline & 2) {
-#ifdef ISDN_DEBUG_MODEM_VOICE
-			printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
-			       info->line);
-#endif
-			/* voice-playing, add DLE-DC4 */
-			isdn_tty_at_cout("\020\024", info);
-		}
-#endif
-		break;
-	case RESULT_CONNECT:
-	case RESULT_CONNECT64000:
-		sprintf(info->last_cause, "0000");
-		if (!info->online)
-			info->online = 2;
-		break;
-	case RESULT_VCON:
-#ifdef ISDN_DEBUG_MODEM_VOICE
-		printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
-		       info->line);
-#endif
-		sprintf(info->last_cause, "0000");
-		if (!info->online)
-			info->online = 1;
-		break;
-	} /* switch (code) */
-
-	if (m->mdmreg[REG_RESP] & BIT_RESP) {
-		/* Show results */
-		if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) {
-			/* Show numeric results only */
-			sprintf(s, "\r\n%d\r\n", code);
-			isdn_tty_at_cout(s, info);
-		} else {
-			if (code == RESULT_RING) {
-				/* return if "show RUNG" and ringcounter>1 */
-				if ((m->mdmreg[REG_RUNG] & BIT_RUNG) &&
-				    (m->mdmreg[REG_RINGCNT] > 1))
-					return;
-				/* print CID, _before_ _every_ ring */
-				if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) {
-					isdn_tty_at_cout("\r\nCALLER NUMBER: ", info);
-					isdn_tty_at_cout(dev->num[info->drv_index], info);
-					if (m->mdmreg[REG_CDN] & BIT_CDN) {
-						isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
-						isdn_tty_at_cout(info->emu.cpn, info);
-					}
-				}
-			}
-			isdn_tty_at_cout("\r\n", info);
-			isdn_tty_at_cout(msg[code], info);
-			switch (code) {
-			case RESULT_CONNECT:
-				switch (m->mdmreg[REG_L2PROT]) {
-				case ISDN_PROTO_L2_MODEM:
-					isdn_tty_at_cout(" ", info);
-					isdn_tty_at_cout(m->connmsg, info);
-					break;
-				}
-				break;
-			case RESULT_RING:
-				/* Append CPN, if enabled */
-				if ((m->mdmreg[REG_CPN] & BIT_CPN)) {
-					sprintf(s, "/%s", m->cpn);
-					isdn_tty_at_cout(s, info);
-				}
-				/* Print CID only once, _after_ 1st RING */
-				if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) &&
-				    (m->mdmreg[REG_RINGCNT] == 1)) {
-					isdn_tty_at_cout("\r\n", info);
-					isdn_tty_at_cout("CALLER NUMBER: ", info);
-					isdn_tty_at_cout(dev->num[info->drv_index], info);
-					if (m->mdmreg[REG_CDN] & BIT_CDN) {
-						isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
-						isdn_tty_at_cout(info->emu.cpn, info);
-					}
-				}
-				break;
-			case RESULT_NO_CARRIER:
-			case RESULT_NO_DIALTONE:
-			case RESULT_BUSY:
-			case RESULT_NO_ANSWER:
-				m->mdmreg[REG_RINGCNT] = 0;
-				/* Append Cause-Message if enabled */
-				if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) {
-					sprintf(s, "/%s", info->last_cause);
-					isdn_tty_at_cout(s, info);
-				}
-				break;
-			case RESULT_CONNECT64000:
-				/* Append Protocol to CONNECT message */
-				switch (m->mdmreg[REG_L2PROT]) {
-				case ISDN_PROTO_L2_X75I:
-				case ISDN_PROTO_L2_X75UI:
-				case ISDN_PROTO_L2_X75BUI:
-					isdn_tty_at_cout("/X.75", info);
-					break;
-				case ISDN_PROTO_L2_HDLC:
-					isdn_tty_at_cout("/HDLC", info);
-					break;
-				case ISDN_PROTO_L2_V11096:
-					isdn_tty_at_cout("/V110/9600", info);
-					break;
-				case ISDN_PROTO_L2_V11019:
-					isdn_tty_at_cout("/V110/19200", info);
-					break;
-				case ISDN_PROTO_L2_V11038:
-					isdn_tty_at_cout("/V110/38400", info);
-					break;
-				}
-				if (m->mdmreg[REG_T70] & BIT_T70) {
-					isdn_tty_at_cout("/T.70", info);
-					if (m->mdmreg[REG_T70] & BIT_T70_EXT)
-						isdn_tty_at_cout("+", info);
-				}
-				break;
-			}
-			isdn_tty_at_cout("\r\n", info);
-		}
-	}
-	if (code == RESULT_NO_CARRIER) {
-		if (info->closing || (!info->port.tty))
-			return;
-
-		if (tty_port_check_carrier(&info->port))
-			tty_hangup(info->port.tty);
-	}
-}
-
-
-/*
- * Display a modem-register-value.
- */
-static void
-isdn_tty_show_profile(int ridx, modem_info *info)
-{
-	char v[6];
-
-	sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]);
-	isdn_tty_at_cout(v, info);
-}
-
-/*
- * Get MSN-string from char-pointer, set pointer to end of number
- */
-static void
-isdn_tty_get_msnstr(char *n, char **p)
-{
-	int limit = ISDN_MSNLEN - 1;
-
-	while (((*p[0] >= '0' && *p[0] <= '9') ||
-		/* Why a comma ??? */
-		(*p[0] == ',') || (*p[0] == ':')) &&
-	       (limit--))
-		*n++ = *p[0]++;
-	*n = '\0';
-}
-
-/*
- * Get phone-number from modem-commandbuffer
- */
-static void
-isdn_tty_getdial(char *p, char *q, int cnt)
-{
-	int first = 1;
-	int limit = ISDN_MSNLEN - 1;	/* MUST match the size of interface var to avoid
-					   buffer overflow */
-
-	while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt > 0) {
-		if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) ||
-		    ((*p == 'R') && first) ||
-		    (*p == '*') || (*p == '#')) {
-			*q++ = *p;
-			limit--;
-		}
-		if (!limit)
-			break;
-		p++;
-		first = 0;
-	}
-	*q = 0;
-}
-
-#define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; }
-#define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; }
-
-static void
-isdn_tty_report(modem_info *info)
-{
-	atemu *m = &info->emu;
-	char s[80];
-
-	isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info);
-	sprintf(s, "    Remote Number:    %s\r\n", info->last_num);
-	isdn_tty_at_cout(s, info);
-	sprintf(s, "    Direction:        %s\r\n", info->last_dir ? "outgoing" : "incoming");
-	isdn_tty_at_cout(s, info);
-	isdn_tty_at_cout("    Layer-2 Protocol: ", info);
-	switch (info->last_l2) {
-	case ISDN_PROTO_L2_X75I:
-		isdn_tty_at_cout("X.75i", info);
-		break;
-	case ISDN_PROTO_L2_X75UI:
-		isdn_tty_at_cout("X.75ui", info);
-		break;
-	case ISDN_PROTO_L2_X75BUI:
-		isdn_tty_at_cout("X.75bui", info);
-		break;
-	case ISDN_PROTO_L2_HDLC:
-		isdn_tty_at_cout("HDLC", info);
-		break;
-	case ISDN_PROTO_L2_V11096:
-		isdn_tty_at_cout("V.110 9600 Baud", info);
-		break;
-	case ISDN_PROTO_L2_V11019:
-		isdn_tty_at_cout("V.110 19200 Baud", info);
-		break;
-	case ISDN_PROTO_L2_V11038:
-		isdn_tty_at_cout("V.110 38400 Baud", info);
-		break;
-	case ISDN_PROTO_L2_TRANS:
-		isdn_tty_at_cout("transparent", info);
-		break;
-	case ISDN_PROTO_L2_MODEM:
-		isdn_tty_at_cout("modem", info);
-		break;
-	case ISDN_PROTO_L2_FAX:
-		isdn_tty_at_cout("fax", info);
-		break;
-	default:
-		isdn_tty_at_cout("unknown", info);
-		break;
-	}
-	if (m->mdmreg[REG_T70] & BIT_T70) {
-		isdn_tty_at_cout("/T.70", info);
-		if (m->mdmreg[REG_T70] & BIT_T70_EXT)
-			isdn_tty_at_cout("+", info);
-	}
-	isdn_tty_at_cout("\r\n", info);
-	isdn_tty_at_cout("    Service:          ", info);
-	switch (info->last_si) {
-	case 1:
-		isdn_tty_at_cout("audio\r\n", info);
-		break;
-	case 5:
-		isdn_tty_at_cout("btx\r\n", info);
-		break;
-	case 7:
-		isdn_tty_at_cout("data\r\n", info);
-		break;
-	default:
-		sprintf(s, "%d\r\n", info->last_si);
-		isdn_tty_at_cout(s, info);
-		break;
-	}
-	sprintf(s, "    Hangup location:  %s\r\n", info->last_lhup ? "local" : "remote");
-	isdn_tty_at_cout(s, info);
-	sprintf(s, "    Last cause:       %s\r\n", info->last_cause);
-	isdn_tty_at_cout(s, info);
-}
-
-/*
- * Parse AT&.. commands.
- */
-static int
-isdn_tty_cmd_ATand(char **p, modem_info *info)
-{
-	atemu *m = &info->emu;
-	int i;
-	char rb[100];
-
-#define MAXRB (sizeof(rb) - 1)
-
-	switch (*p[0]) {
-	case 'B':
-		/* &B - Set Buffersize */
-		p[0]++;
-		i = isdn_getnum(p);
-		if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX))
-			PARSE_ERROR1;
-#ifdef CONFIG_ISDN_AUDIO
-		if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF))
-			PARSE_ERROR1;
-#endif
-		m->mdmreg[REG_PSIZE] = i / 16;
-		info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
-		switch (m->mdmreg[REG_L2PROT]) {
-		case ISDN_PROTO_L2_V11096:
-		case ISDN_PROTO_L2_V11019:
-		case ISDN_PROTO_L2_V11038:
-			info->xmit_size /= 10;
-		}
-		break;
-	case 'C':
-		/* &C - DCD Status */
-		p[0]++;
-		switch (isdn_getnum(p)) {
-		case 0:
-			m->mdmreg[REG_DCD] &= ~BIT_DCD;
-			break;
-		case 1:
-			m->mdmreg[REG_DCD] |= BIT_DCD;
-			break;
-		default:
-			PARSE_ERROR1
-				}
-		break;
-	case 'D':
-		/* &D - Set DTR-Low-behavior */
-		p[0]++;
-		switch (isdn_getnum(p)) {
-		case 0:
-			m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP;
-			m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
-			break;
-		case 2:
-			m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
-			m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
-			break;
-		case 3:
-			m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
-			m->mdmreg[REG_DTRR] |= BIT_DTRR;
-			break;
-		default:
-			PARSE_ERROR1
-				}
-		break;
-	case 'E':
-		/* &E -Set EAZ/MSN */
-		p[0]++;
-		isdn_tty_get_msnstr(m->msn, p);
-		break;
-	case 'F':
-		/* &F -Set Factory-Defaults */
-		p[0]++;
-		if (info->msr & UART_MSR_DCD)
-			PARSE_ERROR1;
-		isdn_tty_reset_profile(m);
-		isdn_tty_modem_reset_regs(info, 1);
-		break;
-#ifdef DUMMY_HAYES_AT
-	case 'K':
-		/* only for be compilant with common scripts */
-		/* &K Flowcontrol - no function */
-		p[0]++;
-		isdn_getnum(p);
-		break;
-#endif
-	case 'L':
-		/* &L -Set Numbers to listen on */
-		p[0]++;
-		i = 0;
-		while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
-		       (i < ISDN_LMSNLEN - 1))
-			m->lmsn[i++] = *p[0]++;
-		m->lmsn[i] = '\0';
-		break;
-	case 'R':
-		/* &R - Set V.110 bitrate adaption */
-		p[0]++;
-		i = isdn_getnum(p);
-		switch (i) {
-		case 0:
-			/* Switch off V.110, back to X.75 */
-			m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
-			m->mdmreg[REG_SI2] = 0;
-			info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
-			break;
-		case 9600:
-			m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096;
-			m->mdmreg[REG_SI2] = 197;
-			info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
-			break;
-		case 19200:
-			m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019;
-			m->mdmreg[REG_SI2] = 199;
-			info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
-			break;
-		case 38400:
-			m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038;
-			m->mdmreg[REG_SI2] = 198; /* no existing standard for this */
-			info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		/* Switch off T.70 */
-		m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
-		/* Set Service 7 */
-		m->mdmreg[REG_SI1] |= 4;
-		break;
-	case 'S':
-		/* &S - Set Windowsize */
-		p[0]++;
-		i = isdn_getnum(p);
-		if ((i > 0) && (i < 9))
-			m->mdmreg[REG_WSIZE] = i;
-		else
-			PARSE_ERROR1;
-		break;
-	case 'V':
-		/* &V - Show registers */
-		p[0]++;
-		isdn_tty_at_cout("\r\n", info);
-		for (i = 0; i < ISDN_MODEM_NUMREG; i++) {
-			sprintf(rb, "S%02d=%03d%s", i,
-				m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
-			isdn_tty_at_cout(rb, info);
-		}
-		sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n",
-			strlen(m->msn) ? m->msn : "None");
-		isdn_tty_at_cout(rb, info);
-		if (strlen(m->lmsn)) {
-			isdn_tty_at_cout("\r\nListen: ", info);
-			isdn_tty_at_cout(m->lmsn, info);
-			isdn_tty_at_cout("\r\n", info);
-		}
-		break;
-	case 'W':
-		/* &W - Write Profile */
-		p[0]++;
-		switch (*p[0]) {
-		case '0':
-			p[0]++;
-			modem_write_profile(m);
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	case 'X':
-		/* &X - Switch to BTX-Mode and T.70 */
-		p[0]++;
-		switch (isdn_getnum(p)) {
-		case 0:
-			m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
-			info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
-			break;
-		case 1:
-			m->mdmreg[REG_T70] |= BIT_T70;
-			m->mdmreg[REG_T70] &= ~BIT_T70_EXT;
-			m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
-			info->xmit_size = 112;
-			m->mdmreg[REG_SI1] = 4;
-			m->mdmreg[REG_SI2] = 0;
-			break;
-		case 2:
-			m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT);
-			m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
-			info->xmit_size = 112;
-			m->mdmreg[REG_SI1] = 4;
-			m->mdmreg[REG_SI2] = 0;
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	default:
-		PARSE_ERROR1;
-	}
-	return 0;
-}
-
-static int
-isdn_tty_check_ats(int mreg, int mval, modem_info *info, atemu *m)
-{
-	/* Some plausibility checks */
-	switch (mreg) {
-	case REG_L2PROT:
-		if (mval > ISDN_PROTO_L2_MAX)
-			return 1;
-		break;
-	case REG_PSIZE:
-		if ((mval * 16) > ISDN_SERIAL_XMIT_MAX)
-			return 1;
-#ifdef CONFIG_ISDN_AUDIO
-		if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX))
-			return 1;
-#endif
-		info->xmit_size = mval * 16;
-		switch (m->mdmreg[REG_L2PROT]) {
-		case ISDN_PROTO_L2_V11096:
-		case ISDN_PROTO_L2_V11019:
-		case ISDN_PROTO_L2_V11038:
-			info->xmit_size /= 10;
-		}
-		break;
-	case REG_SI1I:
-	case REG_PLAN:
-	case REG_SCREEN:
-		/* readonly registers */
-		return 1;
-	}
-	return 0;
-}
-
-/*
- * Perform ATS command
- */
-static int
-isdn_tty_cmd_ATS(char **p, modem_info *info)
-{
-	atemu *m = &info->emu;
-	int bitpos;
-	int mreg;
-	int mval;
-	int bval;
-
-	mreg = isdn_getnum(p);
-	if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG)
-		PARSE_ERROR1;
-	switch (*p[0]) {
-	case '=':
-		p[0]++;
-		mval = isdn_getnum(p);
-		if (mval < 0 || mval > 255)
-			PARSE_ERROR1;
-		if (isdn_tty_check_ats(mreg, mval, info, m))
-			PARSE_ERROR1;
-		m->mdmreg[mreg] = mval;
-		break;
-	case '.':
-		/* Set/Clear a single bit */
-		p[0]++;
-		bitpos = isdn_getnum(p);
-		if ((bitpos < 0) || (bitpos > 7))
-			PARSE_ERROR1;
-		switch (*p[0]) {
-		case '=':
-			p[0]++;
-			bval = isdn_getnum(p);
-			if (bval < 0 || bval > 1)
-				PARSE_ERROR1;
-			if (bval)
-				mval = m->mdmreg[mreg] | (1 << bitpos);
-			else
-				mval = m->mdmreg[mreg] & ~(1 << bitpos);
-			if (isdn_tty_check_ats(mreg, mval, info, m))
-				PARSE_ERROR1;
-			m->mdmreg[mreg] = mval;
-			break;
-		case '?':
-			p[0]++;
-			isdn_tty_at_cout("\r\n", info);
-			isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
-					 info);
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	case '?':
-		p[0]++;
-		isdn_tty_show_profile(mreg, info);
-		break;
-	default:
-		PARSE_ERROR1;
-		break;
-	}
-	return 0;
-}
-
-/*
- * Perform ATA command
- */
-static void
-isdn_tty_cmd_ATA(modem_info *info)
-{
-	atemu *m = &info->emu;
-	isdn_ctrl cmd;
-	int l2;
-
-	if (info->msr & UART_MSR_RI) {
-		/* Accept incoming call */
-		info->last_dir = 0;
-		strcpy(info->last_num, dev->num[info->drv_index]);
-		m->mdmreg[REG_RINGCNT] = 0;
-		info->msr &= ~UART_MSR_RI;
-		l2 = m->mdmreg[REG_L2PROT];
-#ifdef CONFIG_ISDN_AUDIO
-		/* If more than one bit set in reg18, autoselect Layer2 */
-		if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) {
-			if (m->mdmreg[REG_SI1I] == 1) {
-				if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX))
-					l2 = ISDN_PROTO_L2_TRANS;
-			} else
-				l2 = ISDN_PROTO_L2_X75I;
-		}
-#endif
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL2;
-		cmd.arg = info->isdn_channel + (l2 << 8);
-		info->last_l2 = l2;
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.command = ISDN_CMD_SETL3;
-		cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
-#ifdef CONFIG_ISDN_TTY_FAX
-		if (l2 == ISDN_PROTO_L2_FAX) {
-			cmd.parm.fax = info->fax;
-			info->fax->direction = ISDN_TTY_FAX_CONN_IN;
-		}
-#endif
-		isdn_command(&cmd);
-		cmd.driver = info->isdn_driver;
-		cmd.arg = info->isdn_channel;
-		cmd.command = ISDN_CMD_ACCEPTD;
-		info->dialing = 16;
-		info->emu.carrierwait = 0;
-		isdn_command(&cmd);
-		isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
-	} else
-		isdn_tty_modem_result(RESULT_NO_ANSWER, info);
-}
-
-#ifdef CONFIG_ISDN_AUDIO
-/*
- * Parse AT+F.. commands
- */
-static int
-isdn_tty_cmd_PLUSF(char **p, modem_info *info)
-{
-	atemu *m = &info->emu;
-	char rs[20];
-
-	if (!strncmp(p[0], "CLASS", 5)) {
-		p[0] += 5;
-		switch (*p[0]) {
-		case '?':
-			p[0]++;
-			sprintf(rs, "\r\n%d",
-				(m->mdmreg[REG_SI1] & 1) ? 8 : 0);
-#ifdef CONFIG_ISDN_TTY_FAX
-			if (TTY_IS_FCLASS2(info))
-				sprintf(rs, "\r\n2");
-			else if (TTY_IS_FCLASS1(info))
-				sprintf(rs, "\r\n1");
-#endif
-			isdn_tty_at_cout(rs, info);
-			break;
-		case '=':
-			p[0]++;
-			switch (*p[0]) {
-			case '0':
-				p[0]++;
-				m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
-				m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
-				m->mdmreg[REG_SI1] = 4;
-				info->xmit_size =
-					m->mdmreg[REG_PSIZE] * 16;
-				break;
-#ifdef CONFIG_ISDN_TTY_FAX
-			case '1':
-				p[0]++;
-				if (!(dev->global_features &
-				      ISDN_FEATURE_L3_FCLASS1))
-					PARSE_ERROR1;
-				m->mdmreg[REG_SI1] = 1;
-				m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
-				m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1;
-				info->xmit_size =
-					m->mdmreg[REG_PSIZE] * 16;
-				break;
-			case '2':
-				p[0]++;
-				if (!(dev->global_features &
-				      ISDN_FEATURE_L3_FCLASS2))
-					PARSE_ERROR1;
-				m->mdmreg[REG_SI1] = 1;
-				m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
-				m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2;
-				info->xmit_size =
-					m->mdmreg[REG_PSIZE] * 16;
-				break;
-#endif
-			case '8':
-				p[0]++;
-				/* L2 will change on dialout with si=1 */
-				m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
-				m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
-				m->mdmreg[REG_SI1] = 5;
-				info->xmit_size = VBUF;
-				break;
-			case '?':
-				p[0]++;
-				strcpy(rs, "\r\n0,");
-#ifdef CONFIG_ISDN_TTY_FAX
-				if (dev->global_features &
-				    ISDN_FEATURE_L3_FCLASS1)
-					strcat(rs, "1,");
-				if (dev->global_features &
-				    ISDN_FEATURE_L3_FCLASS2)
-					strcat(rs, "2,");
-#endif
-				strcat(rs, "8");
-				isdn_tty_at_cout(rs, info);
-				break;
-			default:
-				PARSE_ERROR1;
-			}
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		return 0;
-	}
-#ifdef CONFIG_ISDN_TTY_FAX
-	return (isdn_tty_cmd_PLUSF_FAX(p, info));
-#else
-	PARSE_ERROR1;
-#endif
-}
-
-/*
- * Parse AT+V.. commands
- */
-static int
-isdn_tty_cmd_PLUSV(char **p, modem_info *info)
-{
-	atemu *m = &info->emu;
-	isdn_ctrl cmd;
-	static char *vcmd[] =
-		{"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL};
-	int i;
-	int par1;
-	int par2;
-	char rs[20];
-
-	i = 0;
-	while (vcmd[i]) {
-		if (!strncmp(vcmd[i], p[0], 2)) {
-			p[0] += 2;
-			break;
-		}
-		i++;
-	}
-	switch (i) {
-	case 0:
-		/* AT+VNH - Auto hangup feature */
-		switch (*p[0]) {
-		case '?':
-			p[0]++;
-			isdn_tty_at_cout("\r\n1", info);
-			break;
-		case '=':
-			p[0]++;
-			switch (*p[0]) {
-			case '1':
-				p[0]++;
-				break;
-			case '?':
-				p[0]++;
-				isdn_tty_at_cout("\r\n1", info);
-				break;
-			default:
-				PARSE_ERROR1;
-			}
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	case 1:
-		/* AT+VIP - Reset all voice parameters */
-		isdn_tty_modem_reset_vpar(m);
-		break;
-	case 2:
-		/* AT+VLS - Select device, accept incoming call */
-		switch (*p[0]) {
-		case '?':
-			p[0]++;
-			sprintf(rs, "\r\n%d", m->vpar[0]);
-			isdn_tty_at_cout(rs, info);
-			break;
-		case '=':
-			p[0]++;
-			switch (*p[0]) {
-			case '0':
-				p[0]++;
-				m->vpar[0] = 0;
-				break;
-			case '2':
-				p[0]++;
-				m->vpar[0] = 2;
-				break;
-			case '?':
-				p[0]++;
-				isdn_tty_at_cout("\r\n0,2", info);
-				break;
-			default:
-				PARSE_ERROR1;
-			}
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	case 3:
-		/* AT+VRX - Start recording */
-		if (!m->vpar[0])
-			PARSE_ERROR1;
-		if (info->online != 1) {
-			isdn_tty_modem_result(RESULT_NO_ANSWER, info);
-			return 1;
-		}
-		info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
-		if (!info->dtmf_state) {
-			printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
-			PARSE_ERROR1;
-		}
-		info->silence_state = isdn_audio_silence_init(info->silence_state);
-		if (!info->silence_state) {
-			printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n");
-			PARSE_ERROR1;
-		}
-		if (m->vpar[3] < 5) {
-			info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
-			if (!info->adpcmr) {
-				printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
-				PARSE_ERROR1;
-			}
-		}
-#ifdef ISDN_DEBUG_AT
-		printk(KERN_DEBUG "AT: +VRX\n");
-#endif
-		info->vonline |= 1;
-		isdn_tty_modem_result(RESULT_CONNECT, info);
-		return 0;
-		break;
-	case 4:
-		/* AT+VSD - Silence detection */
-		switch (*p[0]) {
-		case '?':
-			p[0]++;
-			sprintf(rs, "\r\n<%d>,<%d>",
-				m->vpar[1],
-				m->vpar[2]);
-			isdn_tty_at_cout(rs, info);
-			break;
-		case '=':
-			p[0]++;
-			if ((*p[0] >= '0') && (*p[0] <= '9')) {
-				par1 = isdn_getnum(p);
-				if ((par1 < 0) || (par1 > 31))
-					PARSE_ERROR1;
-				if (*p[0] != ',')
-					PARSE_ERROR1;
-				p[0]++;
-				par2 = isdn_getnum(p);
-				if ((par2 < 0) || (par2 > 255))
-					PARSE_ERROR1;
-				m->vpar[1] = par1;
-				m->vpar[2] = par2;
-				break;
-			} else
-				if (*p[0] == '?') {
-					p[0]++;
-					isdn_tty_at_cout("\r\n<0-31>,<0-255>",
-							 info);
-					break;
-				} else
-					PARSE_ERROR1;
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	case 5:
-		/* AT+VSM - Select compression */
-		switch (*p[0]) {
-		case '?':
-			p[0]++;
-			sprintf(rs, "\r\n<%d>,<%d><8000>",
-				m->vpar[3],
-				m->vpar[1]);
-			isdn_tty_at_cout(rs, info);
-			break;
-		case '=':
-			p[0]++;
-			switch (*p[0]) {
-			case '2':
-			case '3':
-			case '4':
-			case '5':
-			case '6':
-				par1 = isdn_getnum(p);
-				if ((par1 < 2) || (par1 > 6))
-					PARSE_ERROR1;
-				m->vpar[3] = par1;
-				break;
-			case '?':
-				p[0]++;
-				isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
-						 info);
-				isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
-						 info);
-				isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
-						 info);
-				isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n",
-						 info);
-				isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n",
-						 info);
-				break;
-			default:
-				PARSE_ERROR1;
-			}
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	case 6:
-		/* AT+VTX - Start sending */
-		if (!m->vpar[0])
-			PARSE_ERROR1;
-		if (info->online != 1) {
-			isdn_tty_modem_result(RESULT_NO_ANSWER, info);
-			return 1;
-		}
-		info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
-		if (!info->dtmf_state) {
-			printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
-			PARSE_ERROR1;
-		}
-		if (m->vpar[3] < 5) {
-			info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
-			if (!info->adpcms) {
-				printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
-				PARSE_ERROR1;
-			}
-		}
-#ifdef ISDN_DEBUG_AT
-		printk(KERN_DEBUG "AT: +VTX\n");
-#endif
-		m->lastDLE = 0;
-		info->vonline |= 2;
-		isdn_tty_modem_result(RESULT_CONNECT, info);
-		return 0;
-		break;
-	case 7:
-		/* AT+VDD - DTMF detection */
-		switch (*p[0]) {
-		case '?':
-			p[0]++;
-			sprintf(rs, "\r\n<%d>,<%d>",
-				m->vpar[4],
-				m->vpar[5]);
-			isdn_tty_at_cout(rs, info);
-			break;
-		case '=':
-			p[0]++;
-			if ((*p[0] >= '0') && (*p[0] <= '9')) {
-				if (info->online != 1)
-					PARSE_ERROR1;
-				par1 = isdn_getnum(p);
-				if ((par1 < 0) || (par1 > 15))
-					PARSE_ERROR1;
-				if (*p[0] != ',')
-					PARSE_ERROR1;
-				p[0]++;
-				par2 = isdn_getnum(p);
-				if ((par2 < 0) || (par2 > 255))
-					PARSE_ERROR1;
-				m->vpar[4] = par1;
-				m->vpar[5] = par2;
-				cmd.driver = info->isdn_driver;
-				cmd.command = ISDN_CMD_AUDIO;
-				cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8);
-				cmd.parm.num[0] = par1;
-				cmd.parm.num[1] = par2;
-				isdn_command(&cmd);
-				break;
-			} else
-				if (*p[0] == '?') {
-					p[0]++;
-					isdn_tty_at_cout("\r\n<0-15>,<0-255>",
-							 info);
-					break;
-				} else
-					PARSE_ERROR1;
-			break;
-		default:
-			PARSE_ERROR1;
-		}
-		break;
-	default:
-		PARSE_ERROR1;
-	}
-	return 0;
-}
-#endif                          /* CONFIG_ISDN_AUDIO */
-
-/*
- * Parse and perform an AT-command-line.
- */
-static void
-isdn_tty_parse_at(modem_info *info)
-{
-	atemu *m = &info->emu;
-	char *p;
-	char ds[ISDN_MSNLEN];
-
-#ifdef ISDN_DEBUG_AT
-	printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd);
-#endif
-	for (p = &m->mdmcmd[2]; *p;) {
-		switch (*p) {
-		case ' ':
-			p++;
-			break;
-		case 'A':
-			/* A - Accept incoming call */
-			p++;
-			isdn_tty_cmd_ATA(info);
-			return;
-		case 'D':
-			/* D - Dial */
-			if (info->msr & UART_MSR_DCD)
-				PARSE_ERROR;
-			if (info->msr & UART_MSR_RI) {
-				isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-				return;
-			}
-			isdn_tty_getdial(++p, ds, sizeof ds);
-			p += strlen(p);
-			if (!strlen(m->msn))
-				isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info);
-			else if (strlen(ds))
-				isdn_tty_dial(ds, info, m);
-			else
-				PARSE_ERROR;
-			return;
-		case 'E':
-			/* E - Turn Echo on/off */
-			p++;
-			switch (isdn_getnum(&p)) {
-			case 0:
-				m->mdmreg[REG_ECHO] &= ~BIT_ECHO;
-				break;
-			case 1:
-				m->mdmreg[REG_ECHO] |= BIT_ECHO;
-				break;
-			default:
-				PARSE_ERROR;
-			}
-			break;
-		case 'H':
-			/* H - On/Off-hook */
-			p++;
-			switch (*p) {
-			case '0':
-				p++;
-				isdn_tty_on_hook(info);
-				break;
-			case '1':
-				p++;
-				isdn_tty_off_hook();
-				break;
-			default:
-				isdn_tty_on_hook(info);
-				break;
-			}
-			break;
-		case 'I':
-			/* I - Information */
-			p++;
-			isdn_tty_at_cout("\r\nLinux ISDN", info);
-			switch (*p) {
-			case '0':
-			case '1':
-				p++;
-				break;
-			case '2':
-				p++;
-				isdn_tty_report(info);
-				break;
-			case '3':
-				p++;
-				snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge);
-				isdn_tty_at_cout(ds, info);
-				break;
-			default:;
-			}
-			break;
-#ifdef DUMMY_HAYES_AT
-		case 'L':
-		case 'M':
-			/* only for be compilant with common scripts */
-			/* no function */
-			p++;
-			isdn_getnum(&p);
-			break;
-#endif
-		case 'O':
-			/* O - Go online */
-			p++;
-			if (info->msr & UART_MSR_DCD)
-				/* if B-Channel is up */
-				isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT : RESULT_CONNECT64000, info);
-			else
-				isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-			return;
-		case 'Q':
-			/* Q - Turn Emulator messages on/off */
-			p++;
-			switch (isdn_getnum(&p)) {
-			case 0:
-				m->mdmreg[REG_RESP] |= BIT_RESP;
-				break;
-			case 1:
-				m->mdmreg[REG_RESP] &= ~BIT_RESP;
-				break;
-			default:
-				PARSE_ERROR;
-			}
-			break;
-		case 'S':
-			/* S - Set/Get Register */
-			p++;
-			if (isdn_tty_cmd_ATS(&p, info))
-				return;
-			break;
-		case 'V':
-			/* V - Numeric or ASCII Emulator-messages */
-			p++;
-			switch (isdn_getnum(&p)) {
-			case 0:
-				m->mdmreg[REG_RESP] |= BIT_RESPNUM;
-				break;
-			case 1:
-				m->mdmreg[REG_RESP] &= ~BIT_RESPNUM;
-				break;
-			default:
-				PARSE_ERROR;
-			}
-			break;
-		case 'Z':
-			/* Z - Load Registers from Profile */
-			p++;
-			if (info->msr & UART_MSR_DCD) {
-				info->online = 0;
-				isdn_tty_on_hook(info);
-			}
-			isdn_tty_modem_reset_regs(info, 1);
-			break;
-		case '+':
-			p++;
-			switch (*p) {
-#ifdef CONFIG_ISDN_AUDIO
-			case 'F':
-				p++;
-				if (isdn_tty_cmd_PLUSF(&p, info))
-					return;
-				break;
-			case 'V':
-				if ((!(m->mdmreg[REG_SI1] & 1)) ||
-				    (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM))
-					PARSE_ERROR;
-				p++;
-				if (isdn_tty_cmd_PLUSV(&p, info))
-					return;
-				break;
-#endif                          /* CONFIG_ISDN_AUDIO */
-			case 'S':	/* SUSPEND */
-				p++;
-				isdn_tty_get_msnstr(ds, &p);
-				isdn_tty_suspend(ds, info, m);
-				break;
-			case 'R':	/* RESUME */
-				p++;
-				isdn_tty_get_msnstr(ds, &p);
-				isdn_tty_resume(ds, info, m);
-				break;
-			case 'M':	/* MESSAGE */
-				p++;
-				isdn_tty_send_msg(info, m, p);
-				break;
-			default:
-				PARSE_ERROR;
-			}
-			break;
-		case '&':
-			p++;
-			if (isdn_tty_cmd_ATand(&p, info))
-				return;
-			break;
-		default:
-			PARSE_ERROR;
-		}
-	}
-#ifdef CONFIG_ISDN_AUDIO
-	if (!info->vonline)
-#endif
-		isdn_tty_modem_result(RESULT_OK, info);
-}
-
-/* Need own toupper() because standard-toupper is not available
- * within modules.
- */
-#define my_toupper(c) (((c >= 'a') && (c <= 'z')) ? (c & 0xdf) : c)
-
-/*
- * Perform line-editing of AT-commands
- *
- * Parameters:
- *   p        inputbuffer
- *   count    length of buffer
- *   channel  index to line (minor-device)
- */
-static int
-isdn_tty_edit_at(const char *p, int count, modem_info *info)
-{
-	atemu *m = &info->emu;
-	int total = 0;
-	u_char c;
-	char eb[2];
-	int cnt;
-
-	for (cnt = count; cnt > 0; p++, cnt--) {
-		c = *p;
-		total++;
-		if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) {
-			/* Separator (CR or LF) */
-			m->mdmcmd[m->mdmcmdl] = 0;
-			if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
-				eb[0] = c;
-				eb[1] = 0;
-				isdn_tty_at_cout(eb, info);
-			}
-			if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2))))
-				isdn_tty_parse_at(info);
-			m->mdmcmdl = 0;
-			continue;
-		}
-		if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) {
-			/* Backspace-Function */
-			if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) {
-				if (m->mdmcmdl)
-					m->mdmcmdl--;
-				if (m->mdmreg[REG_ECHO] & BIT_ECHO)
-					isdn_tty_at_cout("\b", info);
-			}
-			continue;
-		}
-		if (cmdchar(c)) {
-			if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
-				eb[0] = c;
-				eb[1] = 0;
-				isdn_tty_at_cout(eb, info);
-			}
-			if (m->mdmcmdl < 255) {
-				c = my_toupper(c);
-				switch (m->mdmcmdl) {
-				case 1:
-					if (c == 'T') {
-						m->mdmcmd[m->mdmcmdl] = c;
-						m->mdmcmd[++m->mdmcmdl] = 0;
-						break;
-					} else
-						m->mdmcmdl = 0;
-					/* Fall through - check for 'A' */
-				case 0:
-					if (c == 'A') {
-						m->mdmcmd[m->mdmcmdl] = c;
-						m->mdmcmd[++m->mdmcmdl] = 0;
-					}
-					break;
-				default:
-					m->mdmcmd[m->mdmcmdl] = c;
-					m->mdmcmd[++m->mdmcmdl] = 0;
-				}
-			}
-		}
-	}
-	return total;
-}
-
-/*
- * Switch all modem-channels who are online and got a valid
- * escape-sequence 1.5 seconds ago, to command-mode.
- * This function is called every second via timer-interrupt from within
- * timer-dispatcher isdn_timer_function()
- */
-void
-isdn_tty_modem_escape(void)
-{
-	int ton = 0;
-	int i;
-	int midx;
-
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++)
-		if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) {
-			modem_info *info = &dev->mdm.info[midx];
-			if (info->online) {
-				ton = 1;
-				if ((info->emu.pluscount == 3) &&
-				    time_after(jiffies,
-					    info->emu.lastplus + PLUSWAIT2)) {
-					info->emu.pluscount = 0;
-					info->online = 0;
-					isdn_tty_modem_result(RESULT_OK, info);
-				}
-			}
-		}
-	isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
-}
-
-/*
- * Put a RING-message to all modem-channels who have the RI-bit set.
- * This function is called every second via timer-interrupt from within
- * timer-dispatcher isdn_timer_function()
- */
-void
-isdn_tty_modem_ring(void)
-{
-	int ton = 0;
-	int i;
-
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		modem_info *info = &dev->mdm.info[i];
-		if (info->msr & UART_MSR_RI) {
-			ton = 1;
-			isdn_tty_modem_result(RESULT_RING, info);
-		}
-	}
-	isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton);
-}
-
-/*
- * For all online tty's, try sending data to
- * the lower levels.
- */
-void
-isdn_tty_modem_xmit(void)
-{
-	int ton = 1;
-	int i;
-
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		modem_info *info = &dev->mdm.info[i];
-		if (info->online) {
-			ton = 1;
-			isdn_tty_senddown(info);
-			isdn_tty_tint(info);
-		}
-	}
-	isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton);
-}
-
-/*
- * Check all channels if we have a 'no carrier' timeout.
- * Timeout value is set by Register S7.
- */
-void
-isdn_tty_carrier_timeout(void)
-{
-	int ton = 0;
-	int i;
-
-	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		modem_info *info = &dev->mdm.info[i];
-		if (!info->dialing)
-			continue;
-		if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
-			info->dialing = 0;
-			isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-			isdn_tty_modem_hup(info, 1);
-		} else
-			ton = 1;
-	}
-	isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
-}