Merge tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - New sensor driver: imx219

 - Support for some new pixelformats

 - Support for Sun8i SoC

 - Added more codecs to meson vdec driver

 - Prepare for removing the legacy usbvision driver by moving it to
   staging. This driver has issues and use legacy core APIs. If nobody
   steps up to address those, it is time for its retirement.

 - Several cleanups and improvements on drivers, with the addition of
   new supported boards

* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
  media: venus: firmware: Ignore secure call error on first resume
  media: mtk-vpu: load vpu firmware from the new location
  media: i2c: video-i2c: fix build errors due to 'imply hwmon'
  media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
  media: hantro: add initial i.MX8MQ support
  media: dt-bindings: Document i.MX8MQ VPU bindings
  media: vivid: fix incorrect PA assignment to HDMI outputs
  media: hantro: Add linux-rockchip mailing list to MAINTAINERS
  media: cedrus: h264: Fix 4K decoding on H6
  media: siano: Use scnprintf() for avoiding potential buffer overflow
  media: rc: Use scnprintf() for avoiding potential buffer overflow
  media: allegro: create new struct for channel parameters
  media: allegro: move mail definitions to separate file
  media: allegro: pass buffers through firmware
  media: allegro: verify source and destination buffer in VCU response
  media: allegro: handle dependency of bitrate and bitrate_peak
  media: allegro: read bitrate mode directly from control
  media: allegro: make QP configurable
  media: allegro: make frame rate configurable
  media: allegro: skip filler data if possible
  ...

1 files changed, 622 insertions, 180 deletions

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index edad49cebcdf..eb39cf5ea089 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -13,12 +13,15 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <media/v4l2-async.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-fwnode.h>
 #include <media/v4l2-mc.h>
+#include <media/v4l2-rect.h>
 
 #include "tvp5150_reg.h"
 
@@ -31,6 +34,15 @@
 #define TVP5150_MBUS_FMT	MEDIA_BUS_FMT_UYVY8_2X8
 #define TVP5150_FIELD		V4L2_FIELD_ALTERNATE
 #define TVP5150_COLORSPACE	V4L2_COLORSPACE_SMPTE170M
+#define TVP5150_STD_MASK	(V4L2_STD_NTSC     | \
+				 V4L2_STD_NTSC_443 | \
+				 V4L2_STD_PAL      | \
+				 V4L2_STD_PAL_M    | \
+				 V4L2_STD_PAL_N    | \
+				 V4L2_STD_PAL_Nc   | \
+				 V4L2_STD_SECAM)
+
+#define TVP5150_MAX_CONNECTORS	3 /* Check dt-bindings for more information */
 
 MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
 MODULE_AUTHOR("Mauro Carvalho Chehab");
@@ -44,18 +56,26 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)");
 #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
 
 enum tvp5150_pads {
-	TVP5150_PAD_IF_INPUT,
+	TVP5150_PAD_AIP1A,
+	TVP5150_PAD_AIP1B,
 	TVP5150_PAD_VID_OUT,
 	TVP5150_NUM_PADS
 };
 
+struct tvp5150_connector {
+	struct v4l2_fwnode_connector base;
+	struct media_entity ent;
+	struct media_pad pad;
+};
+
 struct tvp5150 {
 	struct v4l2_subdev sd;
-#ifdef CONFIG_MEDIA_CONTROLLER
+
 	struct media_pad pads[TVP5150_NUM_PADS];
-	struct media_entity input_ent[TVP5150_INPUT_NUM];
-	struct media_pad input_pad[TVP5150_INPUT_NUM];
-#endif
+	struct tvp5150_connector connectors[TVP5150_MAX_CONNECTORS];
+	struct tvp5150_connector *cur_connector;
+	unsigned int connectors_num;
+
 	struct v4l2_ctrl_handler hdl;
 	struct v4l2_rect rect;
 	struct regmap *regmap;
@@ -282,9 +302,12 @@ static void tvp5150_selmux(struct v4l2_subdev *sd)
 		break;
 	}
 
-	dev_dbg_lvl(sd->dev, 1, debug, "Selecting video route: route input=%i, output=%i => tvp5150 input=%i, opmode=%i\n",
-			decoder->input, decoder->output,
-			input, opmode);
+	dev_dbg_lvl(sd->dev, 1, debug,
+		    "Selecting video route: route input=%s, output=%s => tvp5150 input=0x%02x, opmode=0x%02x\n",
+		    decoder->input == 0 ? "aip1a" :
+		    decoder->input == 2 ? "aip1b" : "svideo",
+		    decoder->output == 0 ? "normal" : "black-frame-gen",
+		    input, opmode);
 
 	regmap_write(decoder->regmap, TVP5150_OP_MODE_CTL, opmode);
 	regmap_write(decoder->regmap, TVP5150_VD_IN_SRC_SEL_1, input);
@@ -773,17 +796,33 @@ static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
+	struct tvp5150_connector *cur_con = decoder->cur_connector;
+	v4l2_std_id supported_stds;
 
 	if (decoder->norm == std)
 		return 0;
 
+	/* In case of no of-connectors are available no limitations are made */
+	if (!decoder->connectors_num)
+		supported_stds = V4L2_STD_ALL;
+	else
+		supported_stds = cur_con->base.connector.analog.sdtv_stds;
+
+	/*
+	 * Check if requested std or group of std's is/are supported by the
+	 * connector.
+	 */
+	if ((supported_stds & std) == 0)
+		return -EINVAL;
+
 	/* Change cropping height limits */
 	if (std & V4L2_STD_525_60)
 		decoder->rect.height = TVP5150_V_MAX_525_60;
 	else
 		decoder->rect.height = TVP5150_V_MAX_OTHERS;
 
-	decoder->norm = std;
+	/* Set only the specific supported std in case of group of std's. */
+	decoder->norm = supported_stds & std;
 
 	return tvp5150_set_std(sd, std);
 }
@@ -986,6 +1025,25 @@ static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)
 		crop->height = TVP5150_V_MAX_OTHERS;
 }
 
+static struct v4l2_rect *
+tvp5150_get_pad_crop(struct tvp5150 *decoder,
+		     struct v4l2_subdev_pad_config *cfg, unsigned int pad,
+		     enum v4l2_subdev_format_whence which)
+{
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &decoder->rect;
+	case V4L2_SUBDEV_FORMAT_TRY:
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+		return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
+#else
+		return ERR_PTR(-EINVAL);
+#endif
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+}
+
 static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
 			    struct v4l2_subdev_pad_config *cfg,
 			    struct v4l2_subdev_format *format)
@@ -1010,25 +1068,10 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int tvp5150_set_selection(struct v4l2_subdev *sd,
-				 struct v4l2_subdev_pad_config *cfg,
-				 struct v4l2_subdev_selection *sel)
+static unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
-	struct v4l2_rect rect = sel->r;
 	v4l2_std_id std;
-	int hmax;
-
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
-	    sel->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
-		__func__, rect.left, rect.top, rect.width, rect.height);
-
-	/* tvp5150 has some special limits */
-	rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
-	rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
 
 	/* Calculate height based on current standard */
 	if (decoder->norm == V4L2_STD_ALL)
@@ -1036,36 +1079,78 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
 	else
 		std = decoder->norm;
 
-	if (std & V4L2_STD_525_60)
-		hmax = TVP5150_V_MAX_525_60;
-	else
-		hmax = TVP5150_V_MAX_OTHERS;
+	return (std & V4L2_STD_525_60) ?
+		TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
+}
 
-	/*
-	 * alignments:
-	 *  - width = 2 due to UYVY colorspace
-	 *  - height, image = no special alignment
-	 */
-	v4l_bound_align_image(&rect.width,
-			      TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
-			      TVP5150_H_MAX - rect.left, 1, &rect.height,
-			      hmax - TVP5150_MAX_CROP_TOP - rect.top,
-			      hmax - rect.top, 0, 0);
+static void tvp5150_set_hw_selection(struct v4l2_subdev *sd,
+				     struct v4l2_rect *rect)
+{
+	struct tvp5150 *decoder = to_tvp5150(sd);
+	unsigned int hmax = tvp5150_get_hmax(sd);
 
-	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
+	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
 	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
-		     rect.top + rect.height - hmax);
+		     rect->top + rect->height - hmax);
 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
-		     rect.left >> TVP5150_CROP_SHIFT);
+		     rect->left >> TVP5150_CROP_SHIFT);
 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
-		     rect.left | (1 << TVP5150_CROP_SHIFT));
+		     rect->left | (1 << TVP5150_CROP_SHIFT));
 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
-		     (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
+		     (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
 		     TVP5150_CROP_SHIFT);
 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
-		     rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
+		     rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
+}
+
+static int tvp5150_set_selection(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_selection *sel)
+{
+	struct tvp5150 *decoder = to_tvp5150(sd);
+	struct v4l2_rect *rect = &sel->r;
+	struct v4l2_rect *crop;
+	unsigned int hmax;
+
+	if (sel->target != V4L2_SEL_TGT_CROP)
+		return -EINVAL;
+
+	dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
+		__func__, rect->left, rect->top, rect->width, rect->height);
+
+	/* tvp5150 has some special limits */
+	rect->left = clamp(rect->left, 0, TVP5150_MAX_CROP_LEFT);
+	rect->top = clamp(rect->top, 0, TVP5150_MAX_CROP_TOP);
+	hmax = tvp5150_get_hmax(sd);
+
+	/*
+	 * alignments:
+	 *  - width = 2 due to UYVY colorspace
+	 *  - height, image = no special alignment
+	 */
+	v4l_bound_align_image(&rect->width,
+			      TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect->left,
+			      TVP5150_H_MAX - rect->left, 1, &rect->height,
+			      hmax - TVP5150_MAX_CROP_TOP - rect->top,
+			      hmax - rect->top, 0, 0);
+
+	if (!IS_ENABLED(CONFIG_VIDEO_V4L2_SUBDEV_API) &&
+	    sel->which == V4L2_SUBDEV_FORMAT_TRY)
+		return 0;
+
+	crop = tvp5150_get_pad_crop(decoder, cfg, sel->pad, sel->which);
+	if (IS_ERR(crop))
+		return PTR_ERR(crop);
+
+	/*
+	 * Update output image size if the selection (crop) rectangle size or
+	 * position has been modified.
+	 */
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
+	    !v4l2_rect_equal(rect, crop))
+		tvp5150_set_hw_selection(sd, rect);
 
-	decoder->rect = rect;
+	*crop = *rect;
 
 	return 0;
 }
@@ -1075,11 +1160,9 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
 				 struct v4l2_subdev_selection *sel)
 {
 	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
+	struct v4l2_rect *crop;
 	v4l2_std_id std;
 
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
-		return -EINVAL;
-
 	switch (sel->target) {
 	case V4L2_SEL_TGT_CROP_BOUNDS:
 		sel->r.left = 0;
@@ -1097,7 +1180,11 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
 			sel->r.height = TVP5150_V_MAX_OTHERS;
 		return 0;
 	case V4L2_SEL_TGT_CROP:
-		sel->r = decoder->rect;
+		crop = tvp5150_get_pad_crop(decoder, cfg, sel->pad,
+					    sel->which);
+		if (IS_ERR(crop))
+			return PTR_ERR(crop);
+		sel->r = *crop;
 		return 0;
 	default:
 		return -EINVAL;
@@ -1170,30 +1257,148 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
 }
 
 /****************************************************************************
-			Media entity ops
+ *			Media entity ops
  ****************************************************************************/
+#if defined(CONFIG_MEDIA_CONTROLLER)
+static int tvp5150_set_link(struct media_pad *connector_pad,
+			    struct media_pad *tvp5150_pad, u32 flags)
+{
+	struct media_link *link;
+
+	link = media_entity_find_link(connector_pad, tvp5150_pad);
+	if (!link)
+		return -EINVAL;
+
+	link->flags = flags;
+	link->reverse->flags = link->flags;
+
+	return 0;
+}
+
+static int tvp5150_disable_all_input_links(struct tvp5150 *decoder)
+{
+	struct media_pad *connector_pad;
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
+		connector_pad = media_entity_remote_pad(&decoder->pads[i]);
+		if (!connector_pad)
+			continue;
+
+		err = tvp5150_set_link(connector_pad, &decoder->pads[i], 0);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+			     u32 config);
 
-#ifdef CONFIG_MEDIA_CONTROLLER
 static int tvp5150_link_setup(struct media_entity *entity,
-			      const struct media_pad *local,
+			      const struct media_pad *tvp5150_pad,
 			      const struct media_pad *remote, u32 flags)
 {
 	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
 	struct tvp5150 *decoder = to_tvp5150(sd);
-	int i;
+	struct media_pad *other_tvp5150_pad =
+		&decoder->pads[tvp5150_pad->index ^ 1];
+	struct v4l2_fwnode_connector *v4l2c;
+	bool is_svideo = false;
+	unsigned int i;
+	int err;
+
+	/*
+	 * The TVP5150 state is determined by the enabled sink pad link(s).
+	 * Enabling or disabling the source pad link has no effect.
+	 */
+	if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE)
+		return 0;
 
-	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
-		if (remote->entity == &decoder->input_ent[i])
+	/* Check if the svideo connector should be enabled */
+	for (i = 0; i < decoder->connectors_num; i++) {
+		if (remote->entity == &decoder->connectors[i].ent) {
+			v4l2c = &decoder->connectors[i].base;
+			is_svideo = v4l2c->type == V4L2_CONN_SVIDEO;
 			break;
+		}
 	}
 
-	/* Do nothing for entities that are not input connectors */
-	if (i == TVP5150_INPUT_NUM)
-		return 0;
+	dev_dbg_lvl(sd->dev, 1, debug, "link setup '%s':%d->'%s':%d[%d]",
+		    remote->entity->name, remote->index,
+		    tvp5150_pad->entity->name, tvp5150_pad->index,
+		    flags & MEDIA_LNK_FL_ENABLED);
+	if (is_svideo)
+		dev_dbg_lvl(sd->dev, 1, debug,
+			    "link setup '%s':%d->'%s':%d[%d]",
+			    remote->entity->name, remote->index,
+			    other_tvp5150_pad->entity->name,
+			    other_tvp5150_pad->index,
+			    flags & MEDIA_LNK_FL_ENABLED);
 
-	decoder->input = i;
+	/*
+	 * The TVP5150 has an internal mux which allows the following setup:
+	 *
+	 * comp-connector1  --\
+	 *		       |---> AIP1A
+	 *		      /
+	 * svideo-connector -|
+	 *		      \
+	 *		       |---> AIP1B
+	 * comp-connector2  --/
+	 *
+	 * We can't rely on user space that the current connector gets disabled
+	 * first before enabling the new connector. Disable all active
+	 * connector links to be on the safe side.
+	 */
+	err = tvp5150_disable_all_input_links(decoder);
+	if (err)
+		return err;
+
+	tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : tvp5150_pad->index,
+			  flags & MEDIA_LNK_FL_ENABLED ? TVP5150_NORMAL :
+			  TVP5150_BLACK_SCREEN, 0);
+
+	if (flags & MEDIA_LNK_FL_ENABLED) {
+		struct v4l2_fwnode_connector_analog *v4l2ca;
+		u32 new_norm;
+
+		/*
+		 * S-Video connector is conneted to both ports AIP1A and AIP1B.
+		 * Both links must be enabled in one-shot regardless which link
+		 * the user requests.
+		 */
+		if (is_svideo) {
+			err = tvp5150_set_link((struct media_pad *)remote,
+					       other_tvp5150_pad, flags);
+			if (err)
+				return err;
+		}
 
-	tvp5150_selmux(sd);
+		if (!decoder->connectors_num)
+			return 0;
+
+		/* Update the current connector */
+		decoder->cur_connector =
+			container_of(remote, struct tvp5150_connector, pad);
+
+		/*
+		 * Do nothing if the new connector supports the same tv-norms as
+		 * the old one.
+		 */
+		v4l2ca = &decoder->cur_connector->base.connector.analog;
+		new_norm = decoder->norm & v4l2ca->sdtv_stds;
+		if (decoder->norm == new_norm)
+			return 0;
+
+		/*
+		 * Fallback to the new connector tv-norms if we can't find any
+		 * common between the current tv-norm and the new one.
+		 */
+		tvp5150_s_std(sd, new_norm ? new_norm : v4l2ca->sdtv_stds);
+	}
 
 	return 0;
 }
@@ -1202,20 +1407,54 @@ static const struct media_entity_operations tvp5150_sd_media_ops = {
 	.link_setup = tvp5150_link_setup,
 };
 #endif
-
 /****************************************************************************
 			I2C Command
  ****************************************************************************/
+static int __maybe_unused tvp5150_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct tvp5150 *decoder = to_tvp5150(sd);
+
+	if (decoder->irq)
+		/* Disable lock interrupt */
+		return regmap_update_bits(decoder->regmap,
+					  TVP5150_INT_ENABLE_REG_A,
+					  TVP5150_INT_A_LOCK, 0);
+	return 0;
+}
+
+static int __maybe_unused tvp5150_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct tvp5150 *decoder = to_tvp5150(sd);
+
+	if (decoder->irq)
+		/* Enable lock interrupt */
+		return regmap_update_bits(decoder->regmap,
+					  TVP5150_INT_ENABLE_REG_A,
+					  TVP5150_INT_A_LOCK,
+					  TVP5150_INT_A_LOCK);
+	return 0;
+}
 
 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
-	unsigned int mask, val = 0, int_val = 0;
+	unsigned int mask, val = 0;
+	int ret;
 
 	mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
 	       TVP5150_MISC_CTL_CLOCK_OE;
 
 	if (enable) {
+		ret = pm_runtime_get_sync(sd->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(sd->dev);
+			return ret;
+		}
+
 		tvp5150_enable(sd);
 
 		/* Enable outputs if decoder is locked */
@@ -1223,15 +1462,13 @@ static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
 			val = decoder->lock ? decoder->oe : 0;
 		else
 			val = decoder->oe;
-		int_val = TVP5150_INT_A_LOCK;
+
 		v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt);
+	} else {
+		pm_runtime_put(sd->dev);
 	}
 
 	regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val);
-	if (decoder->irq)
-		/* Enable / Disable lock interrupt */
-		regmap_update_bits(decoder->regmap, TVP5150_INT_ENABLE_REG_A,
-				   TVP5150_INT_A_LOCK, int_val);
 
 	return 0;
 }
@@ -1342,6 +1579,19 @@ static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regi
 }
 #endif
 
+static int tvp5150_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				   struct v4l2_event_subscription *sub)
+{
+	switch (sub->type) {
+	case V4L2_EVENT_SOURCE_CHANGE:
+		return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
+	case V4L2_EVENT_CTRL:
+		return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
+	default:
+		return -EINVAL;
+	}
+}
+
 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 {
 	int status = tvp5150_read(sd, 0x88);
@@ -1352,40 +1602,96 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 
 static int tvp5150_registered(struct v4l2_subdev *sd)
 {
-#ifdef CONFIG_MEDIA_CONTROLLER
+#if defined(CONFIG_MEDIA_CONTROLLER)
 	struct tvp5150 *decoder = to_tvp5150(sd);
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
-		struct media_entity *input = &decoder->input_ent[i];
-		struct media_pad *pad = &decoder->input_pad[i];
-
-		if (!input->name)
-			continue;
+	unsigned int i;
+	int ret;
 
-		decoder->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
+	/*
+	 * Setup connector pads and links. Enable the link to the first
+	 * available connector per default.
+	 */
+	for (i = 0; i < decoder->connectors_num; i++) {
+		struct media_entity *con = &decoder->connectors[i].ent;
+		struct media_pad *pad = &decoder->connectors[i].pad;
+		struct v4l2_fwnode_connector *v4l2c =
+			&decoder->connectors[i].base;
+		struct v4l2_connector_link *link =
+			v4l2_connector_first_link(v4l2c);
+		unsigned int port = link->fwnode_link.remote_port;
+		unsigned int flags = i ? 0 : MEDIA_LNK_FL_ENABLED;
+		bool is_svideo = v4l2c->type == V4L2_CONN_SVIDEO;
+
+		pad->flags = MEDIA_PAD_FL_SOURCE;
+		ret = media_entity_pads_init(con, 1, pad);
+		if (ret < 0)
+			goto err;
 
-		ret = media_entity_pads_init(input, 1, pad);
+		ret = media_device_register_entity(sd->v4l2_dev->mdev, con);
 		if (ret < 0)
-			return ret;
+			goto err;
 
-		ret = media_device_register_entity(sd->v4l2_dev->mdev, input);
+		ret = media_create_pad_link(con, 0, &sd->entity, port, flags);
 		if (ret < 0)
-			return ret;
+			goto err;
 
-		ret = media_create_pad_link(input, 0, &sd->entity,
-					    TVP5150_PAD_IF_INPUT, 0);
-		if (ret < 0) {
-			media_device_unregister_entity(input);
-			return ret;
+		if (is_svideo) {
+			/*
+			 * Check tvp5150_link_setup() comments for more
+			 * information.
+			 */
+			link = v4l2_connector_last_link(v4l2c);
+			port = link->fwnode_link.remote_port;
+			ret = media_create_pad_link(con, 0, &sd->entity, port,
+						    flags);
+			if (ret < 0)
+				goto err;
+		}
+
+		/* Enable default input. */
+		if (flags == MEDIA_LNK_FL_ENABLED) {
+			decoder->input =
+				is_svideo ? TVP5150_SVIDEO :
+				port == 0 ? TVP5150_COMPOSITE0 :
+				TVP5150_COMPOSITE1;
+
+			tvp5150_selmux(sd);
+			decoder->cur_connector = &decoder->connectors[i];
+			tvp5150_s_std(sd, v4l2c->connector.analog.sdtv_stds);
 		}
 	}
+
+	return 0;
+
+err:
+	for (i = 0; i < decoder->connectors_num; i++)
+		media_device_unregister_entity(&decoder->connectors[i].ent);
+	return ret;
 #endif
 
 	return 0;
 }
 
+static int tvp5150_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(sd->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(sd->dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tvp5150_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	pm_runtime_put(sd->dev);
+
+	return 0;
+}
+
 /* ----------------------------------------------------------------------- */
 
 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
@@ -1399,6 +1705,8 @@ static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
 	.g_register = tvp5150_g_register,
 	.s_register = tvp5150_s_register,
 #endif
+	.subscribe_event = tvp5150_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
 };
 
 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
@@ -1441,6 +1749,8 @@ static const struct v4l2_subdev_ops tvp5150_ops = {
 
 static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
 	.registered = tvp5150_registered,
+	.open = tvp5150_open,
+	.close = tvp5150_close,
 };
 
 /****************************************************************************
@@ -1591,102 +1901,211 @@ static int tvp5150_init(struct i2c_client *c)
 	return 0;
 }
 
-static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
+#if defined(CONFIG_MEDIA_CONTROLLER)
+static int tvp5150_mc_init(struct tvp5150 *decoder)
 {
-	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
-	struct device_node *ep;
-#ifdef CONFIG_MEDIA_CONTROLLER
-	struct device_node *connectors, *child;
-	struct media_entity *input;
-	const char *name;
-	u32 input_type;
-#endif
-	unsigned int flags;
-	int ret = 0;
+	struct v4l2_subdev *sd = &decoder->sd;
+	unsigned int i;
 
-	ep = of_graph_get_next_endpoint(np, NULL);
-	if (!ep)
-		return -EINVAL;
+	sd->entity.ops = &tvp5150_sd_media_ops;
+	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
 
-	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
-	if (ret)
-		goto err;
+	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
+		decoder->pads[i].flags = MEDIA_PAD_FL_SINK;
+		decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG;
+	}
 
-	flags = bus_cfg.bus.parallel.flags;
+	decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE;
+	decoder->pads[i].sig_type = PAD_SIGNAL_DV;
 
-	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
-	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
-	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
-	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
-		ret = -EINVAL;
-		goto err;
-	}
+	return media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS,
+				      decoder->pads);
+}
 
-	decoder->mbus_type = bus_cfg.bus_type;
+#else /* !defined(CONFIG_MEDIA_CONTROLLER) */
 
-#ifdef CONFIG_MEDIA_CONTROLLER
-	connectors = of_get_child_by_name(np, "connectors");
+static inline int tvp5150_mc_init(struct tvp5150 *decoder)
+{
+	return 0;
+}
+#endif /* defined(CONFIG_MEDIA_CONTROLLER) */
 
-	if (!connectors)
-		goto err;
+static int tvp5150_validate_connectors(struct tvp5150 *decoder)
+{
+	struct device *dev = decoder->sd.dev;
+	struct tvp5150_connector *tvpc;
+	struct v4l2_fwnode_connector *v4l2c;
+	unsigned int i;
+
+	if (!decoder->connectors_num) {
+		dev_err(dev, "No valid connector found\n");
+		return -ENODEV;
+	}
 
-	for_each_available_child_of_node(connectors, child) {
-		ret = of_property_read_u32(child, "input", &input_type);
-		if (ret) {
-			dev_err(decoder->sd.dev,
-				 "missing type property in node %pOFn\n",
-				 child);
-			of_node_put(child);
-			goto err_connector;
+	for (i = 0; i < decoder->connectors_num; i++) {
+		struct v4l2_connector_link *link0 = NULL;
+		struct v4l2_connector_link *link1;
+
+		tvpc = &decoder->connectors[i];
+		v4l2c = &tvpc->base;
+
+		if (v4l2c->type == V4L2_CONN_COMPOSITE) {
+			if (v4l2c->nr_of_links != 1) {
+				dev_err(dev, "Composite: connector needs 1 link\n");
+				return -EINVAL;
+			}
+			link0 = v4l2_connector_first_link(v4l2c);
+			if (!link0) {
+				dev_err(dev, "Composite: invalid first link\n");
+				return -EINVAL;
+			}
+			if (link0->fwnode_link.remote_id == 1) {
+				dev_err(dev, "Composite: invalid endpoint id\n");
+				return -EINVAL;
+			}
 		}
 
-		if (input_type >= TVP5150_INPUT_NUM) {
-			ret = -EINVAL;
-			of_node_put(child);
-			goto err_connector;
+		if (v4l2c->type == V4L2_CONN_SVIDEO) {
+			if (v4l2c->nr_of_links != 2) {
+				dev_err(dev, "SVideo: connector needs 2 links\n");
+				return -EINVAL;
+			}
+			link0 = v4l2_connector_first_link(v4l2c);
+			if (!link0) {
+				dev_err(dev, "SVideo: invalid first link\n");
+				return -EINVAL;
+			}
+			link1 = v4l2_connector_last_link(v4l2c);
+			if (link0->fwnode_link.remote_port ==
+			    link1->fwnode_link.remote_port) {
+				dev_err(dev, "SVideo: invalid link setup\n");
+				return -EINVAL;
+			}
 		}
 
-		input = &decoder->input_ent[input_type];
+		if (!(v4l2c->connector.analog.sdtv_stds & TVP5150_STD_MASK)) {
+			dev_err(dev, "Unsupported tv-norm on connector %s\n",
+				v4l2c->name);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
+{
+	struct device *dev = decoder->sd.dev;
+	struct v4l2_fwnode_endpoint bus_cfg = {
+		.bus_type = V4L2_MBUS_UNKNOWN
+	};
+	struct device_node *ep_np;
+	struct tvp5150_connector *tvpc;
+	struct v4l2_fwnode_connector *v4l2c;
+	unsigned int flags, ep_num;
+	unsigned int i;
+	int ret;
+
+	/* At least 1 output and 1 input */
+	ep_num = of_graph_get_endpoint_count(np);
+	if (ep_num < 2 || ep_num > 5) {
+		dev_err(dev, "At least 1 input and 1 output must be connected to the device.\n");
+		return -EINVAL;
+	}
 
-		/* Each input connector can only be defined once */
-		if (input->name) {
-			dev_err(decoder->sd.dev,
-				 "input %s with same type already exists\n",
-				 input->name);
-			of_node_put(child);
-			ret = -EINVAL;
-			goto err_connector;
+	/* Layout if all connectors are used:
+	 *
+	 * tvp-5150 port@0 (AIP1A)
+	 *	endpoint@0 -----------> Comp0-Con  port
+	 *	endpoint@1 --------+--> Svideo-Con port
+	 * tvp-5150 port@1 (AIP1B) |
+	 *	endpoint@1 --------+
+	 *	endpoint@0 -----------> Comp1-Con  port
+	 * tvp-5150 port@2
+	 *	endpoint (video bitstream output at YOUT[0-7] parallel bus)
+	 */
+	for_each_endpoint_of_node(np, ep_np) {
+		struct fwnode_handle *ep_fwnode = of_fwnode_handle(ep_np);
+		unsigned int next_connector = decoder->connectors_num;
+		struct of_endpoint ep;
+
+		of_graph_parse_endpoint(ep_np, &ep);
+		if (ep.port > 1 || ep.id > 1) {
+			dev_dbg(dev, "Ignore connector on port@%u/ep@%u\n",
+				ep.port, ep.id);
+			continue;
 		}
 
-		switch (input_type) {
-		case TVP5150_COMPOSITE0:
-		case TVP5150_COMPOSITE1:
-			input->function = MEDIA_ENT_F_CONN_COMPOSITE;
-			break;
-		case TVP5150_SVIDEO:
-			input->function = MEDIA_ENT_F_CONN_SVIDEO;
-			break;
+		tvpc = &decoder->connectors[next_connector];
+		v4l2c = &tvpc->base;
+
+		if (ep.port == 0 || (ep.port == 1 && ep.id == 0)) {
+			ret = v4l2_fwnode_connector_parse(ep_fwnode, v4l2c);
+			if (ret)
+				goto err_put;
+			ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c);
+			if (ret)
+				goto err_put;
+			decoder->connectors_num++;
+		} else {
+			/* Adding the 2nd svideo link */
+			for (i = 0; i < TVP5150_MAX_CONNECTORS; i++) {
+				tvpc = &decoder->connectors[i];
+				v4l2c = &tvpc->base;
+				if (v4l2c->type == V4L2_CONN_SVIDEO)
+					break;
+			}
+
+			ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c);
+			if (ret)
+				goto err_put;
 		}
+	}
 
-		input->flags = MEDIA_ENT_FL_CONNECTOR;
+	ret = tvp5150_validate_connectors(decoder);
+	if (ret)
+		goto err_free;
+
+	for (i = 0; i < decoder->connectors_num; i++) {
+		tvpc = &decoder->connectors[i];
+		v4l2c = &tvpc->base;
+		tvpc->ent.flags = MEDIA_ENT_FL_CONNECTOR;
+		tvpc->ent.function = v4l2c->type == V4L2_CONN_SVIDEO ?
+			MEDIA_ENT_F_CONN_SVIDEO : MEDIA_ENT_F_CONN_COMPOSITE;
+		tvpc->ent.name = devm_kasprintf(dev, GFP_KERNEL, "%s %s",
+						v4l2c->name, v4l2c->label ?
+						v4l2c->label : "");
+	}
 
-		ret = of_property_read_string(child, "label", &name);
-		if (ret < 0) {
-			dev_err(decoder->sd.dev,
-				 "missing label property in node %pOFn\n",
-				 child);
-			of_node_put(child);
-			goto err_connector;
-		}
+	ep_np = of_graph_get_endpoint_by_regs(np, TVP5150_PAD_VID_OUT, 0);
+	if (!ep_np) {
+		dev_err(dev, "Error no output endpoint available\n");
+		goto err_free;
+	}
+	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), &bus_cfg);
+	of_node_put(ep_np);
+	if (ret)
+		goto err_free;
 
-		input->name = name;
+	flags = bus_cfg.bus.parallel.flags;
+	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
+	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
+	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
+	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
+		ret = -EINVAL;
+		goto err_free;
 	}
 
-err_connector:
-	of_node_put(connectors);
-#endif
-err:
-	of_node_put(ep);
+	decoder->mbus_type = bus_cfg.bus_type;
+
+	return 0;
+
+err_put:
+	of_node_put(ep_np);
+err_free:
+	for (i = 0; i < TVP5150_MAX_CONNECTORS; i++)
+		v4l2_fwnode_connector_free(&decoder->connectors[i].base);
+
 	return ret;
 }
 
@@ -1701,6 +2120,7 @@ static int tvp5150_probe(struct i2c_client *c)
 	struct v4l2_subdev *sd;
 	struct device_node *np = c->dev.of_node;
 	struct regmap *map;
+	unsigned int i;
 	int res;
 
 	/* Check if the adapter supports the needed features */
@@ -1722,6 +2142,9 @@ static int tvp5150_probe(struct i2c_client *c)
 
 	core->regmap = map;
 	sd = &core->sd;
+	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
+	sd->internal_ops = &tvp5150_internal_ops;
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
 
 	if (IS_ENABLED(CONFIG_OF) && np) {
 		res = tvp5150_parse_dt(core, np);
@@ -1734,30 +2157,29 @@ static int tvp5150_probe(struct i2c_client *c)
 		core->mbus_type = V4L2_MBUS_BT656;
 	}
 
-	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
-	sd->internal_ops = &tvp5150_internal_ops;
-	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	core->pads[TVP5150_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
-	core->pads[TVP5150_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
-	core->pads[TVP5150_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
-	core->pads[TVP5150_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
-
-	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
-
-	res = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, core->pads);
-	if (res < 0)
+	res = tvp5150_mc_init(core);
+	if (res)
 		return res;
 
-	sd->entity.ops = &tvp5150_sd_media_ops;
-#endif
-
 	res = tvp5150_detect_version(core);
 	if (res < 0)
 		return res;
 
-	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
+	/*
+	 * Iterate over all available connectors in case they are supported and
+	 * successfully parsed. Fallback to default autodetect in case they
+	 * aren't supported.
+	 */
+	for (i = 0; i < core->connectors_num; i++) {
+		struct v4l2_fwnode_connector *v4l2c;
+
+		v4l2c = &core->connectors[i].base;
+		core->norm |= v4l2c->connector.analog.sdtv_stds;
+	}
+
+	if (!core->connectors_num)
+		core->norm = V4L2_STD_ALL;
+
 	core->detected_norm = V4L2_STD_UNKNOWN;
 	core->input = TVP5150_COMPOSITE1;
 	core->enable = true;
@@ -1802,6 +2224,11 @@ static int tvp5150_probe(struct i2c_client *c)
 
 	if (debug > 1)
 		tvp5150_log_status(sd);
+
+	pm_runtime_set_active(&c->dev);
+	pm_runtime_enable(&c->dev);
+	pm_runtime_idle(&c->dev);
+
 	return 0;
 
 err:
@@ -1813,18 +2240,32 @@ static int tvp5150_remove(struct i2c_client *c)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(c);
 	struct tvp5150 *decoder = to_tvp5150(sd);
+	unsigned int i;
 
 	dev_dbg_lvl(sd->dev, 1, debug,
 		"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
 		c->addr << 1);
 
+	for (i = 0; i < decoder->connectors_num; i++)
+		v4l2_fwnode_connector_free(&decoder->connectors[i].base);
+	for (i = 0; i < decoder->connectors_num; i++)
+		media_device_unregister_entity(&decoder->connectors[i].ent);
 	v4l2_async_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&decoder->hdl);
+	pm_runtime_disable(&c->dev);
+	pm_runtime_set_suspended(&c->dev);
+
 	return 0;
 }
 
 /* ----------------------------------------------------------------------- */
 
+static const struct dev_pm_ops tvp5150_pm_ops = {
+	SET_RUNTIME_PM_OPS(tvp5150_runtime_suspend,
+			   tvp5150_runtime_resume,
+			   NULL)
+};
+
 static const struct i2c_device_id tvp5150_id[] = {
 	{ "tvp5150", 0 },
 	{ }
@@ -1843,6 +2284,7 @@ static struct i2c_driver tvp5150_driver = {
 	.driver = {
 		.of_match_table = of_match_ptr(tvp5150_of_match),
 		.name	= "tvp5150",
+		.pm	= &tvp5150_pm_ops,
 	},
 	.probe_new	= tvp5150_probe,
 	.remove		= tvp5150_remove,