media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHY

The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media
bus enum.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

10 files changed, 15 insertions, 15 deletions

diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 5a10ce31a1bd..99697baad2ea 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -752,7 +752,7 @@ static int adv7180_g_mbus_config(struct v4l2_subdev *sd,
 	struct adv7180_state *state = to_state(sd);
 
 	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
-		cfg->type = V4L2_MBUS_CSI2;
+		cfg->type = V4L2_MBUS_CSI2_DPHY;
 		cfg->flags = V4L2_MBUS_CSI2_1_LANE |
 				V4L2_MBUS_CSI2_CHANNEL_0 |
 				V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 664ffacc8d66..73a4bd7c0291 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1820,7 +1820,7 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
 			goto power_off;
 
 		/* We're done here for DVP bus, while CSI-2 needs setup. */
-		if (sensor->ep.bus_type != V4L2_MBUS_CSI2)
+		if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
 			return 0;
 
 		/*
@@ -1867,7 +1867,7 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
 		usleep_range(500, 1000);
 
 	} else {
-		if (sensor->ep.bus_type == V4L2_MBUS_CSI2) {
+		if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
 			/* Reset MIPI bus settings to their default values. */
 			ov5640_write_reg(sensor,
 					 OV5640_REG_IO_MIPI_CTRL00, 0x58);
@@ -2625,7 +2625,7 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
 			sensor->pending_fmt_change = false;
 		}
 
-		if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
+		if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
 			ret = ov5640_set_stream_mipi(sensor, enable);
 		else
 			ret = ov5640_set_stream_dvp(sensor, enable);
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 1722cdab0daf..5eba8dd7222b 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1127,7 +1127,7 @@ static int ov5645_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	if (ov5645->ep.bus_type != V4L2_MBUS_CSI2) {
+	if (ov5645->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
 		dev_err(dev, "invalid bus type, must be CSI2\n");
 		return -EINVAL;
 	}
diff --git a/drivers/media/i2c/ov7251.c b/drivers/media/i2c/ov7251.c
index d3ebb7529fca..0c10203f822b 100644
--- a/drivers/media/i2c/ov7251.c
+++ b/drivers/media/i2c/ov7251.c
@@ -1279,9 +1279,9 @@ static int ov7251_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	if (ov7251->ep.bus_type != V4L2_MBUS_CSI2) {
+	if (ov7251->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
 		dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
-			ov7251->ep.bus_type, V4L2_MBUS_CSI2);
+			ov7251->ep.bus_type, V4L2_MBUS_CSI2_DPHY);
 		return -EINVAL;
 	}
 
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
index c4145194251f..ed7348a8a01a 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
@@ -1644,7 +1644,7 @@ static int s5c73m3_get_platform_data(struct s5c73m3 *state)
 	if (ret)
 		return ret;
 
-	if (ep.bus_type != V4L2_MBUS_CSI2) {
+	if (ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
 		dev_err(dev, "unsupported bus type\n");
 		return -EINVAL;
 	}
diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
index 5007c9659342..4c41a770b132 100644
--- a/drivers/media/i2c/s5k5baf.c
+++ b/drivers/media/i2c/s5k5baf.c
@@ -766,7 +766,7 @@ static int s5k5baf_hw_set_video_bus(struct s5k5baf *state)
 {
 	u16 en_pkts;
 
-	if (state->bus_type == V4L2_MBUS_CSI2)
+	if (state->bus_type == V4L2_MBUS_CSI2_DPHY)
 		en_pkts = EN_PACKETS_CSI2;
 	else
 		en_pkts = 0;
@@ -1875,7 +1875,7 @@ static int s5k5baf_parse_device_node(struct s5k5baf *state, struct device *dev)
 	state->bus_type = ep.bus_type;
 
 	switch (state->bus_type) {
-	case V4L2_MBUS_CSI2:
+	case V4L2_MBUS_CSI2_DPHY:
 		state->nlanes = ep.bus.mipi_csi2.num_data_lanes;
 		break;
 	case V4L2_MBUS_PARALLEL:
diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c
index 63cf8db82e7d..ab26f549d716 100644
--- a/drivers/media/i2c/s5k6aa.c
+++ b/drivers/media/i2c/s5k6aa.c
@@ -688,7 +688,7 @@ static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa,
 	 * but there is nothing indicating how to switch between both
 	 * in the datasheet. For now default BT.601 interface is assumed.
 	 */
-	if (bus_type == V4L2_MBUS_CSI2)
+	if (bus_type == V4L2_MBUS_CSI2_DPHY)
 		cfg = nlanes;
 	else if (bus_type != V4L2_MBUS_PARALLEL)
 		return -EINVAL;
diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
index bccbf4c841d6..69495c6dc228 100644
--- a/drivers/media/i2c/smiapp/smiapp-core.c
+++ b/drivers/media/i2c/smiapp/smiapp-core.c
@@ -2780,7 +2780,7 @@ static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev)
 		goto out_err;
 
 	switch (bus_cfg->bus_type) {
-	case V4L2_MBUS_CSI2:
+	case V4L2_MBUS_CSI2_DPHY:
 		hwcfg->csi_signalling_mode = SMIAPP_CSI_SIGNALLING_MODE_CSI2;
 		hwcfg->lanes = bus_cfg->bus.mipi_csi2.num_data_lanes;
 		break;
diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c
index c6c41b03c0ef..0931898c79dd 100644
--- a/drivers/media/i2c/soc_camera/ov5642.c
+++ b/drivers/media/i2c/soc_camera/ov5642.c
@@ -912,7 +912,7 @@ static int ov5642_get_selection(struct v4l2_subdev *sd,
 static int ov5642_g_mbus_config(struct v4l2_subdev *sd,
 				struct v4l2_mbus_config *cfg)
 {
-	cfg->type = V4L2_MBUS_CSI2;
+	cfg->type = V4L2_MBUS_CSI2_DPHY;
 	cfg->flags = V4L2_MBUS_CSI2_2_LANE | V4L2_MBUS_CSI2_CHANNEL_0 |
 					V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
 
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 74159153dfad..0834f254f1c2 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1607,7 +1607,7 @@ static int tc358743_g_mbus_config(struct v4l2_subdev *sd,
 {
 	struct tc358743_state *state = to_state(sd);
 
-	cfg->type = V4L2_MBUS_CSI2;
+	cfg->type = V4L2_MBUS_CSI2_DPHY;
 
 	/* Support for non-continuous CSI-2 clock is missing in the driver */
 	cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
@@ -1922,7 +1922,7 @@ static int tc358743_probe_of(struct tc358743_state *state)
 		goto put_node;
 	}
 
-	if (endpoint->bus_type != V4L2_MBUS_CSI2 ||
+	if (endpoint->bus_type != V4L2_MBUS_CSI2_DPHY ||
 	    endpoint->bus.mipi_csi2.num_data_lanes == 0 ||
 	    endpoint->nr_of_link_frequencies == 0) {
 		dev_err(dev, "missing CSI-2 properties in endpoint\n");