[media] dt3155: move out of staging into drivers/media/pci

The dt3155 code is now in good shape, so move it out of staging into
drivers/media/pci. Mark in MAINTAINERS that I'll do Odd Fixes for this
driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

1 files changed, 626 insertions, 0 deletions

diff --git a/drivers/media/pci/dt3155/dt3155.c b/drivers/media/pci/dt3155/dt3155.c
new file mode 100644
index 000000000000..3131c2ee3b85
--- /dev/null
+++ b/drivers/media/pci/dt3155/dt3155.c
@@ -0,0 +1,626 @@
+/***************************************************************************
+ *   Copyright (C) 2006-2010 by Marin Mitov                                *
+ *   mitov@issp.bas.bg                                                     *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/stringify.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/slab.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "dt3155.h"
+
+#define DT3155_DEVICE_ID 0x1223
+
+/**
+ * read_i2c_reg - reads an internal i2c register
+ *
+ * @addr:	dt3155 mmio base address
+ * @index:	index (internal address) of register to read
+ * @data:	pointer to byte the read data will be placed in
+ *
+ * returns:	zero on success or error code
+ *
+ * This function starts reading the specified (by index) register
+ * and busy waits for the process to finish. The result is placed
+ * in a byte pointed by data.
+ */
+static int read_i2c_reg(void __iomem *addr, u8 index, u8 *data)
+{
+	u32 tmp = index;
+
+	iowrite32((tmp << 17) | IIC_READ, addr + IIC_CSR2);
+	mmiowb();
+	udelay(45); /* wait at least 43 usec for NEW_CYCLE to clear */
+	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
+		return -EIO; /* error: NEW_CYCLE not cleared */
+	tmp = ioread32(addr + IIC_CSR1);
+	if (tmp & DIRECT_ABORT) {
+		/* reset DIRECT_ABORT bit */
+		iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
+		return -EIO; /* error: DIRECT_ABORT set */
+	}
+	*data = tmp >> 24;
+	return 0;
+}
+
+/**
+ * write_i2c_reg - writes to an internal i2c register
+ *
+ * @addr:	dt3155 mmio base address
+ * @index:	index (internal address) of register to read
+ * @data:	data to be written
+ *
+ * returns:	zero on success or error code
+ *
+ * This function starts writing the specified (by index) register
+ * and busy waits for the process to finish.
+ */
+static int write_i2c_reg(void __iomem *addr, u8 index, u8 data)
+{
+	u32 tmp = index;
+
+	iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2);
+	mmiowb();
+	udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */
+	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
+		return -EIO; /* error: NEW_CYCLE not cleared */
+	if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) {
+		/* reset DIRECT_ABORT bit */
+		iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
+		return -EIO; /* error: DIRECT_ABORT set */
+	}
+	return 0;
+}
+
+/**
+ * write_i2c_reg_nowait - writes to an internal i2c register
+ *
+ * @addr:	dt3155 mmio base address
+ * @index:	index (internal address) of register to read
+ * @data:	data to be written
+ *
+ * This function starts writing the specified (by index) register
+ * and then returns.
+ */
+static void write_i2c_reg_nowait(void __iomem *addr, u8 index, u8 data)
+{
+	u32 tmp = index;
+
+	iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2);
+	mmiowb();
+}
+
+/**
+ * wait_i2c_reg - waits the read/write to finish
+ *
+ * @addr:	dt3155 mmio base address
+ *
+ * returns:	zero on success or error code
+ *
+ * This function waits reading/writing to finish.
+ */
+static int wait_i2c_reg(void __iomem *addr)
+{
+	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
+		udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */
+	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
+		return -EIO; /* error: NEW_CYCLE not cleared */
+	if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) {
+		/* reset DIRECT_ABORT bit */
+		iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
+		return -EIO; /* error: DIRECT_ABORT set */
+	}
+	return 0;
+}
+
+static int
+dt3155_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+		unsigned int *nbuffers, unsigned int *num_planes,
+		unsigned int sizes[], void *alloc_ctxs[])
+
+{
+	struct dt3155_priv *pd = vb2_get_drv_priv(vq);
+	unsigned size = pd->width * pd->height;
+
+	if (vq->num_buffers + *nbuffers < 2)
+		*nbuffers = 2 - vq->num_buffers;
+	if (fmt && fmt->fmt.pix.sizeimage < size)
+		return -EINVAL;
+	*num_planes = 1;
+	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : size;
+	alloc_ctxs[0] = pd->alloc_ctx;
+	return 0;
+}
+
+static int dt3155_buf_prepare(struct vb2_buffer *vb)
+{
+	struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue);
+
+	vb2_set_plane_payload(vb, 0, pd->width * pd->height);
+	return 0;
+}
+
+static int dt3155_start_streaming(struct vb2_queue *q, unsigned count)
+{
+	struct dt3155_priv *pd = vb2_get_drv_priv(q);
+	struct vb2_buffer *vb = pd->curr_buf;
+	dma_addr_t dma_addr;
+
+	pd->sequence = 0;
+	dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+	iowrite32(dma_addr, pd->regs + EVEN_DMA_START);
+	iowrite32(dma_addr + pd->width, pd->regs + ODD_DMA_START);
+	iowrite32(pd->width, pd->regs + EVEN_DMA_STRIDE);
+	iowrite32(pd->width, pd->regs + ODD_DMA_STRIDE);
+	/* enable interrupts, clear all irq flags */
+	iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START |
+			FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR);
+	iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
+		  FLD_DN_ODD | FLD_DN_EVEN | CAP_CONT_EVEN | CAP_CONT_ODD,
+							pd->regs + CSR1);
+	wait_i2c_reg(pd->regs);
+	write_i2c_reg(pd->regs, CONFIG, pd->config);
+	write_i2c_reg(pd->regs, EVEN_CSR, CSR_ERROR | CSR_DONE);
+	write_i2c_reg(pd->regs, ODD_CSR, CSR_ERROR | CSR_DONE);
+
+	/*  start the board  */
+	write_i2c_reg(pd->regs, CSR2, pd->csr2 | BUSY_EVEN | BUSY_ODD);
+	return 0;
+}
+
+static void dt3155_stop_streaming(struct vb2_queue *q)
+{
+	struct dt3155_priv *pd = vb2_get_drv_priv(q);
+	struct vb2_buffer *vb;
+
+	spin_lock_irq(&pd->lock);
+	/* stop the board */
+	write_i2c_reg_nowait(pd->regs, CSR2, pd->csr2);
+	iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
+		  FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1);
+	/* disable interrupts, clear all irq flags */
+	iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR);
+	spin_unlock_irq(&pd->lock);
+
+	/*
+	 * It is not clear whether the DMA stops at once or whether it
+	 * will finish the current frame or field first. To be on the
+	 * safe side we wait a bit.
+	 */
+	msleep(45);
+
+	spin_lock_irq(&pd->lock);
+	if (pd->curr_buf) {
+		vb2_buffer_done(pd->curr_buf, VB2_BUF_STATE_ERROR);
+		pd->curr_buf = NULL;
+	}
+
+	while (!list_empty(&pd->dmaq)) {
+		vb = list_first_entry(&pd->dmaq, typeof(*vb), done_entry);
+		list_del(&vb->done_entry);
+		vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irq(&pd->lock);
+}
+
+static void dt3155_buf_queue(struct vb2_buffer *vb)
+{
+	struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue);
+
+	/*  pd->vidq.streaming = 1 when dt3155_buf_queue() is invoked  */
+	spin_lock_irq(&pd->lock);
+	if (pd->curr_buf)
+		list_add_tail(&vb->done_entry, &pd->dmaq);
+	else
+		pd->curr_buf = vb;
+	spin_unlock_irq(&pd->lock);
+}
+
+static const struct vb2_ops q_ops = {
+	.queue_setup = dt3155_queue_setup,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.buf_prepare = dt3155_buf_prepare,
+	.start_streaming = dt3155_start_streaming,
+	.stop_streaming = dt3155_stop_streaming,
+	.buf_queue = dt3155_buf_queue,
+};
+
+static irqreturn_t dt3155_irq_handler_even(int irq, void *dev_id)
+{
+	struct dt3155_priv *ipd = dev_id;
+	struct vb2_buffer *ivb;
+	dma_addr_t dma_addr;
+	u32 tmp;
+
+	tmp = ioread32(ipd->regs + INT_CSR) & (FLD_START | FLD_END_ODD);
+	if (!tmp)
+		return IRQ_NONE;  /* not our irq */
+	if ((tmp & FLD_START) && !(tmp & FLD_END_ODD)) {
+		iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START,
+							ipd->regs + INT_CSR);
+		return IRQ_HANDLED; /* start of field irq */
+	}
+	tmp = ioread32(ipd->regs + CSR1) & (FLD_CRPT_EVEN | FLD_CRPT_ODD);
+	if (tmp) {
+		iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
+						FLD_DN_ODD | FLD_DN_EVEN |
+						CAP_CONT_EVEN | CAP_CONT_ODD,
+							ipd->regs + CSR1);
+		mmiowb();
+	}
+
+	spin_lock(&ipd->lock);
+	if (ipd->curr_buf && !list_empty(&ipd->dmaq)) {
+		v4l2_get_timestamp(&ipd->curr_buf->v4l2_buf.timestamp);
+		ipd->curr_buf->v4l2_buf.sequence = ipd->sequence++;
+		ipd->curr_buf->v4l2_buf.field = V4L2_FIELD_NONE;
+		vb2_buffer_done(ipd->curr_buf, VB2_BUF_STATE_DONE);
+
+		ivb = list_first_entry(&ipd->dmaq, typeof(*ivb), done_entry);
+		list_del(&ivb->done_entry);
+		ipd->curr_buf = ivb;
+		dma_addr = vb2_dma_contig_plane_dma_addr(ivb, 0);
+		iowrite32(dma_addr, ipd->regs + EVEN_DMA_START);
+		iowrite32(dma_addr + ipd->width, ipd->regs + ODD_DMA_START);
+		iowrite32(ipd->width, ipd->regs + EVEN_DMA_STRIDE);
+		iowrite32(ipd->width, ipd->regs + ODD_DMA_STRIDE);
+		mmiowb();
+	}
+
+	/* enable interrupts, clear all irq flags */
+	iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START |
+			FLD_END_EVEN | FLD_END_ODD, ipd->regs + INT_CSR);
+	spin_unlock(&ipd->lock);
+	return IRQ_HANDLED;
+}
+
+static const struct v4l2_file_operations dt3155_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.read = vb2_fop_read,
+	.mmap = vb2_fop_mmap,
+	.poll = vb2_fop_poll
+};
+
+static int dt3155_querycap(struct file *filp, void *p, struct v4l2_capability *cap)
+{
+	struct dt3155_priv *pd = video_drvdata(filp);
+
+	strcpy(cap->driver, DT3155_NAME);
+	strcpy(cap->card, DT3155_NAME " frame grabber");
+	sprintf(cap->bus_info, "PCI:%s", pci_name(pd->pdev));
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	return 0;
+}
+
+static int dt3155_enum_fmt_vid_cap(struct file *filp, void *p, struct v4l2_fmtdesc *f)
+{
+	if (f->index)
+		return -EINVAL;
+	f->pixelformat = V4L2_PIX_FMT_GREY;
+	strcpy(f->description, "8-bit Greyscale");
+	return 0;
+}
+
+static int dt3155_fmt_vid_cap(struct file *filp, void *p, struct v4l2_format *f)
+{
+	struct dt3155_priv *pd = video_drvdata(filp);
+
+	f->fmt.pix.width = pd->width;
+	f->fmt.pix.height = pd->height;
+	f->fmt.pix.pixelformat = V4L2_PIX_FMT_GREY;
+	f->fmt.pix.field = V4L2_FIELD_NONE;
+	f->fmt.pix.bytesperline = f->fmt.pix.width;
+	f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	return 0;
+}
+
+static int dt3155_g_std(struct file *filp, void *p, v4l2_std_id *norm)
+{
+	struct dt3155_priv *pd = video_drvdata(filp);
+
+	*norm = pd->std;
+	return 0;
+}
+
+static int dt3155_s_std(struct file *filp, void *p, v4l2_std_id norm)
+{
+	struct dt3155_priv *pd = video_drvdata(filp);
+
+	if (pd->std == norm)
+		return 0;
+	if (vb2_is_busy(&pd->vidq))
+		return -EBUSY;
+	pd->std = norm;
+	if (pd->std & V4L2_STD_525_60) {
+		pd->csr2 = VT_60HZ;
+		pd->width = 640;
+		pd->height = 480;
+	} else {
+		pd->csr2 = VT_50HZ;
+		pd->width = 768;
+		pd->height = 576;
+	}
+	return 0;
+}
+
+static int dt3155_enum_input(struct file *filp, void *p, struct v4l2_input *input)
+{
+	if (input->index > 3)
+		return -EINVAL;
+	if (input->index)
+		snprintf(input->name, sizeof(input->name), "VID%d", input->index);
+	else
+		strlcpy(input->name, "J2/VID0", sizeof(input->name));
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+	input->std = V4L2_STD_ALL;
+	input->status = 0;
+	return 0;
+}
+
+static int dt3155_g_input(struct file *filp, void *p, unsigned int *i)
+{
+	struct dt3155_priv *pd = video_drvdata(filp);
+
+	*i = pd->input;
+	return 0;
+}
+
+static int dt3155_s_input(struct file *filp, void *p, unsigned int i)
+{
+	struct dt3155_priv *pd = video_drvdata(filp);
+
+	if (i > 3)
+		return -EINVAL;
+	pd->input = i;
+	write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
+	write_i2c_reg(pd->regs, AD_CMD, (i << 6) | (i << 4) | SYNC_LVL_3);
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops dt3155_ioctl_ops = {
+	.vidioc_querycap = dt3155_querycap,
+	.vidioc_enum_fmt_vid_cap = dt3155_enum_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap = dt3155_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap = dt3155_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap = dt3155_fmt_vid_cap,
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_expbuf = vb2_ioctl_expbuf,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+	.vidioc_g_std = dt3155_g_std,
+	.vidioc_s_std = dt3155_s_std,
+	.vidioc_enum_input = dt3155_enum_input,
+	.vidioc_g_input = dt3155_g_input,
+	.vidioc_s_input = dt3155_s_input,
+};
+
+static int dt3155_init_board(struct dt3155_priv *pd)
+{
+	struct pci_dev *pdev = pd->pdev;
+	int i;
+	u8 tmp = 0;
+
+	pci_set_master(pdev); /* dt3155 needs it */
+
+	/*  resetting the adapter  */
+	iowrite32(ADDR_ERR_ODD | ADDR_ERR_EVEN | FLD_CRPT_ODD | FLD_CRPT_EVEN |
+			FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1);
+	mmiowb();
+	msleep(20);
+
+	/*  initializing adapter registers  */
+	iowrite32(FIFO_EN | SRST, pd->regs + CSR1);
+	mmiowb();
+	iowrite32(0xEEEEEE01, pd->regs + EVEN_PIXEL_FMT);
+	iowrite32(0xEEEEEE01, pd->regs + ODD_PIXEL_FMT);
+	iowrite32(0x00000020, pd->regs + FIFO_TRIGER);
+	iowrite32(0x00000103, pd->regs + XFER_MODE);
+	iowrite32(0, pd->regs + RETRY_WAIT_CNT);
+	iowrite32(0, pd->regs + INT_CSR);
+	iowrite32(1, pd->regs + EVEN_FLD_MASK);
+	iowrite32(1, pd->regs + ODD_FLD_MASK);
+	iowrite32(0, pd->regs + MASK_LENGTH);
+	iowrite32(0x0005007C, pd->regs + FIFO_FLAG_CNT);
+	iowrite32(0x01010101, pd->regs + IIC_CLK_DUR);
+	mmiowb();
+
+	/* verifying that we have a DT3155 board (not just a SAA7116 chip) */
+	read_i2c_reg(pd->regs, DT_ID, &tmp);
+	if (tmp != DT3155_ID)
+		return -ENODEV;
+
+	/* initialize AD LUT */
+	write_i2c_reg(pd->regs, AD_ADDR, 0);
+	for (i = 0; i < 256; i++)
+		write_i2c_reg(pd->regs, AD_LUT, i);
+
+	/* initialize ADC references */
+	/* FIXME: pos_ref & neg_ref depend on VT_50HZ */
+	write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
+	write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3);
+	write_i2c_reg(pd->regs, AD_ADDR, AD_POS_REF);
+	write_i2c_reg(pd->regs, AD_CMD, 34);
+	write_i2c_reg(pd->regs, AD_ADDR, AD_NEG_REF);
+	write_i2c_reg(pd->regs, AD_CMD, 0);
+
+	/* initialize PM LUT */
+	write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM);
+	for (i = 0; i < 256; i++) {
+		write_i2c_reg(pd->regs, PM_LUT_ADDR, i);
+		write_i2c_reg(pd->regs, PM_LUT_DATA, i);
+	}
+	write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM | PM_LUT_SEL);
+	for (i = 0; i < 256; i++) {
+		write_i2c_reg(pd->regs, PM_LUT_ADDR, i);
+		write_i2c_reg(pd->regs, PM_LUT_DATA, i);
+	}
+	write_i2c_reg(pd->regs, CONFIG, pd->config); /*  ACQ_MODE_EVEN  */
+
+	/* select channel 1 for input and set sync level */
+	write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
+	write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3);
+
+	/* disable all irqs, clear all irq flags */
+	iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD,
+			pd->regs + INT_CSR);
+
+	return 0;
+}
+
+static struct video_device dt3155_vdev = {
+	.name = DT3155_NAME,
+	.fops = &dt3155_fops,
+	.ioctl_ops = &dt3155_ioctl_ops,
+	.minor = -1,
+	.release = video_device_release_empty,
+	.tvnorms = V4L2_STD_ALL,
+};
+
+static int dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int err;
+	struct dt3155_priv *pd;
+
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (err)
+		return -ENODEV;
+	pd = devm_kzalloc(&pdev->dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	err = v4l2_device_register(&pdev->dev, &pd->v4l2_dev);
+	if (err)
+		return err;
+	pd->vdev = dt3155_vdev;
+	pd->vdev.v4l2_dev = &pd->v4l2_dev;
+	video_set_drvdata(&pd->vdev, pd);  /* for use in video_fops */
+	pd->pdev = pdev;
+	pd->std = V4L2_STD_625_50;
+	pd->csr2 = VT_50HZ;
+	pd->width = 768;
+	pd->height = 576;
+	INIT_LIST_HEAD(&pd->dmaq);
+	mutex_init(&pd->mux);
+	pd->vdev.lock = &pd->mux; /* for locking v4l2_file_operations */
+	pd->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	pd->vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	pd->vidq.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+	pd->vidq.ops = &q_ops;
+	pd->vidq.mem_ops = &vb2_dma_contig_memops;
+	pd->vidq.drv_priv = pd;
+	pd->vidq.min_buffers_needed = 2;
+	pd->vidq.lock = &pd->mux; /* for locking v4l2_file_operations */
+	pd->vdev.queue = &pd->vidq;
+	err = vb2_queue_init(&pd->vidq);
+	if (err < 0)
+		goto err_v4l2_dev_unreg;
+	pd->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
+	if (IS_ERR(pd->alloc_ctx)) {
+		dev_err(&pdev->dev, "Can't allocate buffer context");
+		err = PTR_ERR(pd->alloc_ctx);
+		goto err_v4l2_dev_unreg;
+	}
+	spin_lock_init(&pd->lock);
+	pd->config = ACQ_MODE_EVEN;
+	err = pci_enable_device(pdev);
+	if (err)
+		goto err_free_ctx;
+	err = pci_request_region(pdev, 0, pci_name(pdev));
+	if (err)
+		goto err_pci_disable;
+	pd->regs = pci_iomap(pdev, 0, pci_resource_len(pd->pdev, 0));
+	if (!pd->regs) {
+		err = -ENOMEM;
+		goto err_free_reg;
+	}
+	err = dt3155_init_board(pd);
+	if (err)
+		goto err_iounmap;
+	err = request_irq(pd->pdev->irq, dt3155_irq_handler_even,
+					IRQF_SHARED, DT3155_NAME, pd);
+	if (err)
+		goto err_iounmap;
+	err = video_register_device(&pd->vdev, VFL_TYPE_GRABBER, -1);
+	if (err)
+		goto err_free_irq;
+	dev_info(&pdev->dev, "/dev/video%i is ready\n", pd->vdev.minor);
+	return 0;  /*   success   */
+
+err_free_irq:
+	free_irq(pd->pdev->irq, pd);
+err_iounmap:
+	pci_iounmap(pdev, pd->regs);
+err_free_reg:
+	pci_release_region(pdev, 0);
+err_pci_disable:
+	pci_disable_device(pdev);
+err_free_ctx:
+	vb2_dma_contig_cleanup_ctx(pd->alloc_ctx);
+err_v4l2_dev_unreg:
+	v4l2_device_unregister(&pd->v4l2_dev);
+	return err;
+}
+
+static void dt3155_remove(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
+	struct dt3155_priv *pd = container_of(v4l2_dev, struct dt3155_priv, v4l2_dev);
+
+	video_unregister_device(&pd->vdev);
+	free_irq(pd->pdev->irq, pd);
+	vb2_queue_release(&pd->vidq);
+	v4l2_device_unregister(&pd->v4l2_dev);
+	pci_iounmap(pdev, pd->regs);
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+	vb2_dma_contig_cleanup_ctx(pd->alloc_ctx);
+}
+
+static const struct pci_device_id pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, DT3155_DEVICE_ID) },
+	{ 0, /* zero marks the end */ },
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver pci_driver = {
+	.name = DT3155_NAME,
+	.id_table = pci_ids,
+	.probe = dt3155_probe,
+	.remove = dt3155_remove,
+};
+
+module_pci_driver(pci_driver);
+
+MODULE_DESCRIPTION("video4linux pci-driver for dt3155 frame grabber");
+MODULE_AUTHOR("Marin Mitov <mitov@issp.bas.bg>");
+MODULE_VERSION(DT3155_VERSION);
+MODULE_LICENSE("GPL");