[media] omap3isp: ccdc: Only complete buffer when all fields are captured

Checking that the captured field corresponds to the last required field
depending on the requested field order before completing the buffer
isn't enough. When the first field at stream start corresponds to the
last required field, this would result in returning an interlaced buffer
containing a single field.

Fix this by keeping track of the fields captured in the buffer, and make
sure that both fields are present for alternate field orders.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Enrico Butera <ebutera@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

1 files changed, 51 insertions, 27 deletions

diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c
index ecc37f2d6a90..56c3129c3dcd 100644
--- a/drivers/media/platform/omap3isp/ispccdc.c
+++ b/drivers/media/platform/omap3isp/ispccdc.c
@@ -1134,6 +1134,7 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
 	u32 ccdc_pattern;
 
 	ccdc->bt656 = false;
+	ccdc->fields = 0;
 
 	pad = media_entity_remote_pad(&ccdc->pads[CCDC_PAD_SINK]);
 	sensor = media_entity_to_v4l2_subdev(pad->entity);
@@ -1529,12 +1530,59 @@ done:
 	spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
 }
 
+/*
+ * Check whether the CCDC has captured all fields necessary to complete the
+ * buffer.
+ */
+static bool ccdc_has_all_fields(struct isp_ccdc_device *ccdc)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
+	struct isp_device *isp = to_isp_device(ccdc);
+	enum v4l2_field of_field = ccdc->formats[CCDC_PAD_SOURCE_OF].field;
+	enum v4l2_field field;
+
+	/* When the input is progressive fields don't matter. */
+	if (of_field == V4L2_FIELD_NONE)
+		return true;
+
+	/* Read the current field identifier. */
+	field = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE)
+	      & ISPCCDC_SYN_MODE_FLDSTAT
+	      ? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP;
+
+	/* When capturing fields in alternate order just store the current field
+	 * identifier in the pipeline.
+	 */
+	if (of_field == V4L2_FIELD_ALTERNATE) {
+		pipe->field = field;
+		return true;
+	}
+
+	/* The format is interlaced. Make sure we've captured both fields. */
+	ccdc->fields |= field == V4L2_FIELD_BOTTOM
+		      ? CCDC_FIELD_BOTTOM : CCDC_FIELD_TOP;
+
+	if (ccdc->fields != CCDC_FIELD_BOTH)
+		return false;
+
+	/* Verify that the field just captured corresponds to the last field
+	 * needed based on the desired field order.
+	 */
+	if ((of_field == V4L2_FIELD_INTERLACED_TB && field == V4L2_FIELD_TOP) ||
+	    (of_field == V4L2_FIELD_INTERLACED_BT && field == V4L2_FIELD_BOTTOM))
+		return false;
+
+	/* The buffer can be completed, reset the fields for the next buffer. */
+	ccdc->fields = 0;
+
+	return true;
+}
+
 static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc)
 {
 	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
 	struct isp_device *isp = to_isp_device(ccdc);
 	struct isp_buffer *buffer;
-	enum v4l2_field field;
 
 	/* The CCDC generates VD0 interrupts even when disabled (the datasheet
 	 * doesn't explicitly state if that's supposed to happen or not, so it
@@ -1554,11 +1602,6 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc)
 		return 1;
 	}
 
-	/* Read the current field identifier. */
-	field = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE)
-	      & ISPCCDC_SYN_MODE_FLDSTAT
-	      ? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP;
-
 	/* Wait for the CCDC to become idle. */
 	if (ccdc_sbl_wait_idle(ccdc, 1000)) {
 		dev_info(isp->dev, "CCDC won't become idle!\n");
@@ -1567,27 +1610,8 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc)
 		return 0;
 	}
 
-	switch (ccdc->formats[CCDC_PAD_SOURCE_OF].field) {
-	case V4L2_FIELD_ALTERNATE:
-		/* When capturing fields in alternate order store the current
-		 * field identifier in the pipeline.
-		 */
-		pipe->field = field;
-		break;
-
-	case V4L2_FIELD_INTERLACED_TB:
-		/* When interleaving fields only complete the buffer after
-		 * capturing the second field.
-		 */
-		if (field == V4L2_FIELD_TOP)
-			return 1;
-		break;
-
-	case V4L2_FIELD_INTERLACED_BT:
-		if (field == V4L2_FIELD_BOTTOM)
-			return 1;
-		break;
-	}
+	if (!ccdc_has_all_fields(ccdc))
+		return 1;
 
 	buffer = omap3isp_video_buffer_next(&ccdc->video_out);
 	if (buffer != NULL)