[media] cx231xx: add media controller support

Let's add media controller support for this driver and register it
for both V4L and DVB.

The media controller on this driver is not mandatory, as it can fully
work without it. So, if the media controller register fails, just print
an error message, but proceed with device registering.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

1 files changed, 54 insertions, 6 deletions

diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index da03733690bd..d357e8c0c485 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -912,9 +912,6 @@ static inline void cx231xx_set_model(struct cx231xx *dev)
  */
 void cx231xx_pre_card_setup(struct cx231xx *dev)
 {
-
-	cx231xx_set_model(dev);
-
 	dev_info(dev->dev, "Identified as %s (card=%d)\n",
 		dev->board.name, dev->model);
 
@@ -1092,6 +1089,17 @@ void cx231xx_config_i2c(struct cx231xx *dev)
 	call_all(dev, video, s_stream, 1);
 }
 
+static void cx231xx_unregister_media_device(struct cx231xx *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+	if (dev->media_dev) {
+		media_device_unregister(dev->media_dev);
+		kfree(dev->media_dev);
+		dev->media_dev = NULL;
+	}
+#endif
+}
+
 /*
  * cx231xx_realease_resources()
  * unregisters the v4l2,i2c and usb devices
@@ -1099,6 +1107,8 @@ void cx231xx_config_i2c(struct cx231xx *dev)
 */
 void cx231xx_release_resources(struct cx231xx *dev)
 {
+	cx231xx_unregister_media_device(dev);
+
 	cx231xx_release_analog_resources(dev);
 
 	cx231xx_remove_from_devlist(dev);
@@ -1117,6 +1127,38 @@ void cx231xx_release_resources(struct cx231xx *dev)
 	clear_bit(dev->devno, &cx231xx_devused);
 }
 
+static void cx231xx_media_device_register(struct cx231xx *dev,
+					  struct usb_device *udev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_device *mdev;
+	int ret;
+
+	mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
+	if (!mdev)
+		return;
+
+	mdev->dev = dev->dev;
+	strlcpy(mdev->model, dev->board.name, sizeof(mdev->model));
+	if (udev->serial)
+		strlcpy(mdev->serial, udev->serial, sizeof(mdev->serial));
+	strcpy(mdev->bus_info, udev->devpath);
+	mdev->hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
+	mdev->driver_version = LINUX_VERSION_CODE;
+
+	ret = media_device_register(mdev);
+	if (ret) {
+		dev_err(dev->dev,
+			"Couldn't create a media device. Error: %d\n",
+			ret);
+		kfree(mdev);
+		return;
+	}
+
+	dev->media_dev = mdev;
+#endif
+}
+
 /*
  * cx231xx_init_dev()
  * allocates and inits the device structs, registers i2c bus and v4l device
@@ -1225,10 +1267,8 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
 	}
 
 	retval = cx231xx_register_analog_devices(dev);
-	if (retval) {
-		cx231xx_release_analog_resources(dev);
+	if (retval)
 		goto err_analog;
-	}
 
 	cx231xx_ir_init(dev);
 
@@ -1236,6 +1276,8 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
 
 	return 0;
 err_analog:
+	cx231xx_unregister_media_device(dev);
+	cx231xx_release_analog_resources(dev);
 	cx231xx_remove_from_devlist(dev);
 err_dev_init:
 	cx231xx_dev_uninit(dev);
@@ -1438,6 +1480,8 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
 	dev->video_mode.alt = -1;
 	dev->dev = d;
 
+	cx231xx_set_model(dev);
+
 	dev->interface_count++;
 	/* reset gpio dir and value */
 	dev->gpio_dir = 0;
@@ -1502,7 +1546,11 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
 	/* save our data pointer in this interface device */
 	usb_set_intfdata(interface, dev);
 
+	/* Register the media controller */
+	cx231xx_media_device_register(dev, udev);
+
 	/* Create v4l2 device */
+	dev->v4l2_dev.mdev = dev->media_dev;
 	retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
 	if (retval) {
 		dev_err(d, "v4l2_device_register failed\n");