summaryrefslogtreecommitdiff
path: root/drivers/mmc/core/sdio.c
diff options
context:
space:
mode:
authorUlf Hansson <ulf.hansson@linaro.org>2020-04-30 11:16:40 +0200
committerUlf Hansson <ulf.hansson@linaro.org>2020-05-28 11:21:03 +0200
commit1dc5a61559e73472cd84bc8aa5b297ec0deba4de (patch)
tree83409874ec04c5284d003d383b2d9ca024d360aa /drivers/mmc/core/sdio.c
parentfa1e3191922bb6b59a64a1a03e461cde07ae1e62 (diff)
mmc: sdio: Align the initialization commands in retry path for UHS-I
According to the comment in mmc_sdio_reinit_card(), some SDIO cards may require a "[CMD5,5,3,7] init sequence", which isn't always obeyed in mmc_sdio_init_card(). Especially, when we end up retrying the UHS-I specific initialization, there is a missing CMD5. Let's update the code to make the behaviour consistent and let's also take the opportunity to clean up the code a bit, to avoid open coding. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-5-ulf.hansson@linaro.org
Diffstat (limited to 'drivers/mmc/core/sdio.c')
-rw-r--r--drivers/mmc/core/sdio.c53
1 files changed, 26 insertions, 27 deletions
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 853ac65f0485..435de47a6ee0 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -543,13 +543,33 @@ out:
return err;
}
-static void mmc_sdio_resend_if_cond(struct mmc_host *host, u32 ocr,
- struct mmc_card *card)
+static int mmc_sdio_pre_init(struct mmc_host *host, u32 ocr,
+ struct mmc_card *card)
{
+ if (card)
+ mmc_remove_card(card);
+
+ /*
+ * Reset the card by performing the same steps that are taken by
+ * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
+ *
+ * sdio_reset() is technically not needed. Having just powered up the
+ * hardware, it should already be in reset state. However, some
+ * platforms (such as SD8686 on OLPC) do not instantly cut power,
+ * meaning that a reset is required when restoring power soon after
+ * powering off. It is harmless in other cases.
+ *
+ * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
+ * is not necessary for non-removable cards. However, it is required
+ * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
+ * harmless in other situations.
+ *
+ */
+
sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, ocr);
- mmc_remove_card(card);
+ return mmc_send_io_op_cond(host, 0, NULL);
}
/*
@@ -640,7 +660,7 @@ try_again:
if (rocr & ocr & R4_18V_PRESENT) {
err = mmc_set_uhs_voltage(host, ocr_card);
if (err == -EAGAIN) {
- mmc_sdio_resend_if_cond(host, ocr_card, card);
+ mmc_sdio_pre_init(host, ocr_card, card);
retries--;
goto try_again;
} else if (err) {
@@ -712,7 +732,7 @@ try_again:
*/
err = sdio_read_cccr(card, ocr);
if (err) {
- mmc_sdio_resend_if_cond(host, ocr_card, card);
+ mmc_sdio_pre_init(host, ocr_card, card);
if (ocr & R4_18V_PRESENT) {
/* Retry init sequence, but without R4_18V_PRESENT. */
retries = 0;
@@ -813,28 +833,7 @@ static int mmc_sdio_reinit_card(struct mmc_host *host)
{
int ret;
- /*
- * Reset the card by performing the same steps that are taken by
- * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
- *
- * sdio_reset() is technically not needed. Having just powered up the
- * hardware, it should already be in reset state. However, some
- * platforms (such as SD8686 on OLPC) do not instantly cut power,
- * meaning that a reset is required when restoring power soon after
- * powering off. It is harmless in other cases.
- *
- * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
- * is not necessary for non-removable cards. However, it is required
- * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
- * harmless in other situations.
- *
- */
-
- sdio_reset(host);
- mmc_go_idle(host);
- mmc_send_if_cond(host, host->card->ocr);
-
- ret = mmc_send_io_op_cond(host, 0, NULL);
+ ret = mmc_sdio_pre_init(host, host->card->ocr, NULL);
if (ret)
return ret;